Develop Bugs

HELP. Maybe bricked phone?

Well I was on the 4/10 nightly for CM 10.1, and I wanted to switch back to a stock TW ROM, so I downloaded and flashed PlainJane. Upon reboot my phone demanded that I reset my data because encryption had failed, and I never had my device encrypted, but the only thing I could do was press reset. So I did, and the phone booted into TWRP and flashed a quick message and rebooted to the same screen. I thought oh well no biggie I can restore my backup...NOPE. Looks like my SD card decided to corrupt. Well hey theres Odin right? WRONG AGAIN. I tried the method at
http://www.sxtpdevelopers.com/showthread.php?t=74 and Odin tells me
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> param.bin
<ID:0/006> recovery.img
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cannot boot into recovery because it tells me a firmware update has failed. Please someone help...

When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2

Epix4G said:
When you use ljc it will always fail at sbin it's not going to install the old boot loader use the new tar from This thread
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
THANK YOU SO MUCH! I got TWRP up and running and I'm flashing the stock reset now .

[Q] plz help me

can i flash this rom on my phone samsung galaxy note 2 GT-N7100 xxdmb5???????????????
[ROM][XXDMC3][11-April-2013]★★★★★ Assassin_V5.0 ★★★★★[4.1.2][BUILD,COOK,THEME UR ROM]

Check weather on build.prop in system file,is it written ur device name and other device infos.
If that matches suarly flash flash flash.....
................................................................................................

Check the thread where u got this rom from!
"To err is human, to forgive is divine"
Sent from my SGS II

sanjaykumar.sanjay69 said:
Check weather on build.prop in system file,is it written ur device name and other device infos.
If that matches suarly flash flash flash.....
................................................................................................
Click to expand...
Click to collapse
i don't understand what u mean??????????????

it's mean
It's mean that this rom may be not for your phone. Check it twice. Have you ever flashed this phone before?

santaclaus21 said:
It's mean that this rom may be not for your phone. Check it twice. Have you ever flashed this phone before?
Click to expand...
Click to collapse
yes i flash before allince rom and i use this and my G S 3 flash altima rom

YES
I checked the rom out and yes, you should be able to flash the rom using Odin.

It's this ROM right?
http://forum.xda-developers.com/showthread.php?t=2134867
Should be able to flash it just fine on the N7100

MclDev00 said:
I checked the rom out and yes, you should be able to flash the rom using Odin.
Click to expand...
Click to collapse
The link looked like a recovery flashable zip to me, not an Odin flashable file.

how to root galaxy note 2 with latest firmware DMC3 twrp mod

jann_ali said:
how to root galaxy note 2 with latest firmware DMC3 twrp mod
Click to expand...
Click to collapse
Sorry, but wrong section mate! Please report this thread to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1792
"To err is human, to forgive is divine"
Sent from my SGS II

please help
I cant flash a firmware to my samsung note 2 using odin. Please help me.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

joeydizon said:
I cant flash a firmware to my samsung note 2 using odin. Please help me.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i have the same problem i read some time ago it can be wrong one file or version of the file is not compatible with odin. unfortunetly my phone just died and dont do anything (sorry for bad eanglish)

[Q] Can I do a factory Reset with Odin on MK2?

Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.

re: odin flash
Trong357 said:
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
Click to expand...
Click to collapse
About the only thing you can do is start all over again and put your phone into download
mode and flash the official stock samsung 4.2.2 MDL odin flash firmware.
After that you can root and odin flash twrp or cwm custom recovery.
Here is a link for the official samsung m919 4.2.2 stock mdl firmware:
http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
After downloading unzip and you will find the .TAR file which you
need to use with Odin in it's PDA slot.
Good luck!

How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium

xperia_88 said:
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
In Settings/More/About device/Baseband
☞ Sent from here☜???

Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Trong357 said:
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're using a stock FW to go from 4.3 to 4.2.2 which is not possible. You have to use a 4.3 stock FW to go back to stock. Once you're on the 4.3 boot loader, you're stuck with 4.3. You can NOT downgrade to a different bootloader.
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
Download the 4.3 FW from here, should be the first link.

Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."

re: official stock m919 firmware
Trong357 said:
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
Click to expand...
Click to collapse
Here is the identical firmware as found on SamMobile.com
This is the M919UVUEMK2_M919TMBEMK2_TMB.zip
This contains the TAR file for the official Samsung M919 MK2 4.3 stock firmware.
Here is the direct download link: https://copy.com/hzfaqBpWhinn/M919UVUEMK2_M919TMBEMK2_TMB.zip?download=1
This is a much faster mirror than the Hotfile host which SamMobile uses.
Good luck!

Thanks and thank you and to everyone else who helped. The rom installed successfully but when I tried to turn the phone on, it gets to the T-Mobile splash screen and doesn't go on from there. I left it there for nearly 30 min but it didn't load and the phone was very hot. I re-Odin the rom and tried wiping cache partition and dalvik in recovery but the phone never goes past the T-Mobile screen.

Misterjunky, sir. Thank you!. Your link helped me to unbrick. I've a working ROM now. My root is gone, wifi slightly flaky - but hey can make calls etc.!
I am on 4.3 + MK2 now. My warranty is void etc..but really thank u very much!.

[n7100]Bootloop after installing DN3 Bootloader

Hi,
Just brought my note II three days ago, and looking to update on 4.3. Phone was rooted, Philz installed, stock rom installed (this on : http://forum.xda-developers.com/showthread.php?t=2605464).
After boot I didn't have wifi, so I follow the instructions to install the bootloader, and after that impossible to boot and impossible to flash again.
I don't know if it's because the bootloader is locked or the NAND is corrupted.
I tried to flash with original stock to fix, but same result, always the same result.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEMK8_N7100OXAEMK1_N7100XXUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
[COLOR="DarkOrange"][B]<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL![/B][/COLOR]
<OSM> All threads completed. (succeed 0 / failed 1)

There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app

I will look for thx.
Do you have a link for the firmware + modem you installed please.
The modem is integrate the TAR I downloaded I guess (got it from sammobile).
Since my S2, it's first time I have a problem, usually I found the answer on the forum or internent, but not this time.

Zubair1024 said:
There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes you find the modem you were using and flash it with the rom in Odin. Next time if Wi-Fi doesn't turn on don't flash the bootloader instead Flash Dr ketan's Wi-Fi patch zip file in recovery. It worked for me.
Sent from my GT-N7100 using xda premium

Code:
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
[B][COLOR="DarkOrange"]<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL![/COLOR][/B]
<OSM> All threads completed. (succeed 0 / failed 1)
That didn't work u.u
I tried to flash Stock ROM + MODEM, MODEM alone, always the same problem. (I used odin3.07)
I will try with the other soft, but I have to look for the tar.gz or change my tar.md5 to tar.gz (...but not with windows, i'm not confident in it for that -_-)

[Q] Stock note 2 bootloop

Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a bootloop so first thing i thought of was to flash stock firmware,
So i did that and the Samsung logo just flashes for eternity :| she hasn't done anything like rooting etc.
So i downloaded the UK stock firmware(her note 2 is the THR) but it's still in bootloop!
I can't get into recovery to wipe data! when i hold the key combos, it just keeps rebooting (samsung note II - n7100 black and white one)
(I actually needed help flashing the rom but not its fixed i need help with this and i didn't want to make another thread)
should i try to use put and re-partition?!

kamranhaghighi said:
Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a boot loop so first thing i thought of was to flash stock firmware
so i downloaded the UK firmware (although i have no idea what country it is, but it doesn't make difference right?!)
and it gave me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do ?
i have windows 8 and odin 3.09
Edit: I got the firmware from here :
http://www.cnet.com/how-to/how-to-restore-a-galaxy-note-2-from-rooted-to-factory-settings/
My country's firmware is not available anywhere
Click to expand...
Click to collapse
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.

gb61 said:
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.
Click to expand...
Click to collapse
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|

kamranhaghighi said:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|
Click to expand...
Click to collapse
It should be good to try with Odin more recent if you can.
Iran firmware on the image .

How did you find it i saw that website too but i couldn't find the firmware!
I will try odin 3.07 and post results

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
YEAH! it worked ! thanks so much but i'm afraid it will not work, im still on samsung lighting up and down but i only waited like 1min, it had this problem expect it would not boot at all!
EDIT: ok flashing stock didn't help. i still got bootloop, any idea how to fix this?!
i also can't get into recovery, it only gives me a red led when i hold volUp+Home+power!
i did a few things now i can't even flash the old one with 3.0.7, gives the same error it did on 3.09 , i give uP! somebody help me :|

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
flashing the one i got from sammobile gives me this:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
edit: sounds like it is because its an old firmware!
now i can't even flash the UK with 3.07!

should i make a new thread for my bootloop? (i still got bootloop after going stock)

kamranhaghighi said:
should i make a new thread for my bootloop? (i still got bootloop after going stock)
Click to expand...
Click to collapse
Hello,
have you try to install a custom rom ?

gb61 said:
Hello,
have you try to install a custom rom ?
Click to expand...
Click to collapse
No!

kamranhaghighi said:
No!
Click to expand...
Click to collapse
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?

gb61 said:
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?
Click to expand...
Click to collapse
I just saw it now, and no i can't get into recovery, i will read the link you gave me tomorrow, im super tired today! and also have an exam

my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.

grwalker said:
my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.
Click to expand...
Click to collapse
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)

kamranhaghighi said:
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)
Click to expand...
Click to collapse
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.

gb61 said:
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.
Click to expand...
Click to collapse
i'm also going to check re-partition and use pit file. is that a good idea?

i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Have you follow this steps ?
How to Install ClockworkMod Recovery 6.0.4.4 on Galaxy Note 2 N7100
Download Odin v3.09.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Note 2 N7100 in Download Mode by pressing and holding down the Volume Down, Home and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you downloaded earlier. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Note 2 N7100 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)

gb61 said:
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)
Click to expand...
Click to collapse
ok thanks! btw in the process of doing this i gave myself a nice electric shock 0_0 it came from 2 connectors from back of the device ! i got pass anyway
edit: it will take an hour~ i will post results when its done!