Hi, I was wondering how to update to GB27 without using a USB cable as my micro usb port is broken. I have an sd card, so that is most likely the preferred option for me.
benboomz said:
Hi, I was wondering how to update to GB27 without using a USB cable as my micro usb port is broken. I have an sd card, so that is most likely the preferred option for me.
Click to expand...
Click to collapse
AFAIK, you can only do over the wire. If you need a fix, either hit me up or go to Google and look up mobiletechvideos.
Sent from my SPH-D710 using xda premium
Mobile Odin.
Sent from my SPH-D710 using Xparent Red Tapatalk 2
Worst comes to worst, buy a MicroSD expansion for your Pc to be able to read and write to the SD.
There quite cheap if you look around.
Sent from my Samsung Galaxy S2 (Rooted) - XDA Premium
Related
I already have a USB that plugs into the Nexus so I can drop a flash/thumb drive into it. Do they make a dedicated Micro SD or SD reader?
(I know I can plug an adapter into the USB but that's an extra part I could lose.)
This is what I use and probably your beat option
elago Mobile Nano II USB 2.0 microSDHC Flash Memory Card Reader (Black)
http://www.amazon.com/dp/B002HGFKR8/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my Galaxy Nexus using XDA
The only problem is that the usb host mode drains the battery a lot.
Sent from my Galaxy Nexus using XDA
maxvi8 said:
The only problem is that the usb host mode drains the battery a lot.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
I'm wondering if the battery drain is better in JB. What does everyone else use?
Bought a USB male mini to USB female adapter so I could use my USB drive as external storage. Saw a tutorial on this a while ago, not sure how to do it now. I am rooted and I have purchases root explorer if it helps.
Sent from my Galaxy Nexus using Tapatalk 2
I do not know the details but look into stickmount. I've never used it but it sounds like what you need.
Sent from my Galaxy Nexus using Tapatalk 2
Cheetohz said:
Bought a USB male mini to USB female adapter so I could use my USB drive as external storage. Saw a tutorial on this a while ago, not sure how to do it now. I am rooted and I have purchases root explorer if it helps.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I can confirm that stick mount works either external storage, should work like a charm!
Sent from my Galaxy Nexus using Xparent Green Tapatalk 2
None of my USB drives are lighting up, I may have a doa adapter
Sent from my Galaxy Nexus using Tapatalk 2
Guys, I bought a USB OTG cable today. Nothing special, but my GNexus doesn't want to work with me. No matter what I connect - USB mouse, keyboard, flash drive [w/ StickMount by Chainfire] - Nexus doesn't recognize it. Tried wiping and reflashing my ROM (CM10, today's nightly) but it doesn't help. I use Air Kernel, but flashing franco.kernel or using the stock one doesn't work too. It looks like there's no power in Nexus' micro socket. However, when I connect a USB hub with external power source Nexus starts charging. Any ideas?
Best,
webDeWo.pl
Have you tried turning off "fast charge"?
WiredPirate said:
Have you tried turning off "fast charge"?
Click to expand...
Click to collapse
I've never turned it on
webDeWo said:
Guys, I bought a USB OTG cable today. Nothing special, but my GNexus doesn't want to work with me. No matter what I connect - USB mouse, keyboard, flash drive [w/ StickMount by Chainfire] - Nexus doesn't recognize it. Tried wiping and reflashing my ROM (CM10, today's nightly) but it doesn't help. I use Air Kernel, but flashing franco.kernel or using the stock one doesn't work too. It looks like there's no power in Nexus' micro socket. However, when I connect a USB hub with external power source Nexus starts charging. Any ideas?
Best,
webDeWo.pl
Click to expand...
Click to collapse
You say that when you connect the Nexus to a powered USB hub, it starts to charge. Does that mean you have the USB-OTG cable hooked to the Nexus, then some sort of gender changing adapter to hook it to the USB hub? What happens if you plug the flash drive into the USB hub while the Nexus is "charging"? Does the Nexus continue to charge and you get access to the flash drive???
CNLiberal said:
You say that when you connect the Nexus to a powered USB hub, it starts to charge. Does that mean you have the USB-OTG cable hooked to the Nexus, then some sort of gender changing adapter to hook it to the USB hub? What happens if you plug the flash drive into the USB hub while the Nexus is "charging"? Does the Nexus continue to charge and you get access to the flash drive???
Click to expand...
Click to collapse
I just have a USB hub with a socket for power adaptor - it's nothing special. However, when and I connect anything to my hub while Nexus is "charging" it still doesn't recognize this device. I'm outta ideas.
webDeWo said:
I just have a USB hub with a socket for power adaptor - it's nothing special. However, when and I connect anything to my hub while Nexus is "charging" it still doesn't recognize this device. I'm outta ideas.
Click to expand...
Click to collapse
Darn. I was hoping you had somehow magically discovered that the phone can charge itself while still being in USB Host Mode. That'd be absolutely fantastic!
Try it on stock JB, CM10 isn't even alpha. Plus, make sure any custom kernels you plan on trying support it.
Sent from my Galaxy Nexus using xda app-developers app
Smokeey said:
Try it on stock JB, CM10 isn't even alpha. Plus, make sure any custom kernels you plan on trying support it.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I've tried CM9 stable a few moments ago - doesn't work.
Your cable is probably defective. I just bought mine, works great, but in reading reviews many people reported defective cables.
Sent from my Transformer TF101 using Tapatalk 2
SidereusOne said:
Your cable is probably defective. I just bought mine, works great, but in reading reviews many people reported defective cables.
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
Just bought the second one - still doesn't work. Why?
http://forum.xda-developers.com/archive/index.php/t-1092493.html
Check out that link to see a potential cable problem.
The roms [cm9] and kernel [stock] should work for you.
Is the cable you are buying specifically stating usb otg on the package? If not, buying 2 cables from the same store of the same type won't change anything.
This is what works for mr.
http://www.amazon.ca/Micro-Adapter-...2?s=electronics&ie=UTF8&qid=1345555356&sr=1-2
Sent from my Transformer TF101 using Tapatalk 2
The second one is different - I'n sure it's not the cable problem. Something with my software? I doubt it. Hardware problem?
Sent from my Galaxy Nexus using Tapatalk 2
I seem to get quite a bit of opposition to this but as you'll see there are links included..one from Samsung and if you look in the manual that came with phone, it also talks about the OEM chargers. Try disabling NFC then try yo charge. http://forum.xda-developers.com/showthread.php?t=1841584
*This Jedi master be a Ninj-ESS*
Turning NFC off doesn't help. USB host still does not work.
Sent from my Galaxy Nexus using Tapatalk 2
webDeWo said:
Turning NFC off doesn't help. USB host still does not work.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do you know someone else with a Galaxy Nexus, to test the cables and ensure they do actually work?
I've tried them on HTC One X - they DO work :/
Sent from my Galaxy Nexus using Tapatalk 2
webDeWo said:
I've tried them on HTC One X - they DO work :/
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It was suggested 2x in the thread to go completely stock [rom + kernel].
You stated trying CM10 and CM 9, as well as stock kernel, but you never say if you tested stock/stock.
Mkay, I'll try the stock JB tomorrow.
Sent from my Galaxy Nexus using Tapatalk 2
Tried the stock Jelly Bean. Doesn't work :/
Sent from my Galaxy Nexus using Tapatalk 2
webDeWo said:
Tried the stock Jelly Bean. Doesn't work :/
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Accidentally thanked you.
What I'm trying to say is, AFAIK stock kernel doesn't support OTG. So try going stock then flashing a kernel.
Blazing on my Nexus Prime
I am having this problem I can mount everything from my mouse to my usb. I bought an sd card adapter and put my sd card in the adapter, but didn't work. I know the adapter is not broken because I have tried it on my computer and it worked just fine
dia_naji said:
I am having this problem I can mount everything my mouse my usb. I bought an sd card adapter and out my sd card in the adapter but didn't work. It work just fine on my computer
Click to expand...
Click to collapse
Is the adapter 3.0?
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
Is the adapter 3.0?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
It's a 2.0 ..
dia_naji said:
It's a 2.0 ..
Click to expand...
Click to collapse
How big if the sd card?
Sent from my SGH-T999 using Tapatalk 2
it's a 32 gb class 10
dia_naji said:
it's a 32 gb class 10
Click to expand...
Click to collapse
Ahh that explains it. Search ntfs in the play store and pick one you like. You need an app to mount the ntfs partition.
Sent from my SGH-T999 using Tapatalk 2
It works on my friends Galaxy nexus ???? I'm running 4.1.2
dia_naji said:
It works on my friends Galaxy nexus ???? I'm running 4.1.2
Click to expand...
Click to collapse
That's strange.. it most likely is ntfs formatted though. I'd try USB otg manager from the market. Your USB port isn't damaged at all is it?
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
That's strange.. it most likely is ntfs formatted though. I'd try USB otg manager from the market. Your USB port isn't damaged at all is it?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
It's not damaged at all. The weird thing my observations are that there is not enought power getting to the adaptor. When I plug the adaptor in my friends Galaxy nexus running on stock rom the light on the adaptor lights up just fine, but mine just blinks for like a fraction of a second and doesn't connect. I'm also thinking it's the rom or it needs a new kernal ???
You need to check whether the kernel you're on supports otg.
Sent from my SGH-T989 using Tapatalk 2
That's not it.. I can connect my mouse and and my USB storage device, but when I connect my SDHC adaptor of doesn't work .
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
dia_naji said:
It's not damaged at all. The weird thing my observations are that there is not enought power getting to the adaptor. When I plug the adaptor in my friends Galaxy nexus running on stock rom the light on the adaptor lights up just fine, but mine just blinks for like a fraction of a second and doesn't connect. I'm also thinking it's the rom or it needs a new kernal ???
Click to expand...
Click to collapse
dia_naji said:
That's not it.. I can connect my mouse and and my USB storage device, but when I connect my SDHC adaptor of doesn't work .
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Weird.. I've only seen power with hard drives that use the USB power. Can you post the exact make model of the adapter? Also, do you have a powered USB hub you could try? As in connect hub to phone, plug adapter into hub. That way the adapter most certainly is getting the power needed.
It also might be ROM kernel related.
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
Weird.. I've only seen power with hard drives that use the USB power. Can you post the exact make model of the adapter? Also, do you have a powered USB hub you could try? As in connect hub to phone, plug adapter into hub. That way the adapter most certainly is getting the power needed.
It also might be ROM kernel related.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I have tried everything... Changed the kernal. I literally tried every single kernal. I changed the rom, from jedi mind trick to cm9 stable to koodo. I might just buy a newer one. I tired the usb hub and still not connecting. Thanks for everything btw. I am still looking into this because it's something that I think that needs to be done. Still boggles my mind that it works on the Galaxy Nexus but not that S2
dia_naji said:
I have tried everything... Changed the kernal. I literally tried every single kernal. I changed the rom, from jedi mind trick to cm9 stable to koodo. I might just buy a newer one. I tired the usb hub and still not connecting. Thanks for everything btw. I am still looking into this because it's something that I think that needs to be done. Still boggles my mind that it works on the Galaxy Nexus but not that S2
Click to expand...
Click to collapse
That is very strange. Did you try swapping the otg cable?
Sent from my SGH-T999 using Tapatalk 2
Yup I have 4 of them
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
dia_naji said:
Yup I have 4 of them
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmmm that's really weird how it won't work.
Sent from my SGH-T999 using Tapatalk 2
Yea.. It is weird.
Yea.. It is weird.
dia_naji said:
Yea.. It is weird.
Click to expand...
Click to collapse
While I haven't encountered any issues with sd adapters on the t989, it sounds like you're having either a power problem or that particular adapter isn't playing nice with your kit. You can rule out power by plugging you usb otg to a powered hub and testing with a high powered device (usb drive for example) and should that work, then trying the adapter. If the adapter works off the hub, it's likely a power problem. If not, the adapter hates you and loathes samsung, and wants you to by a nexus.
While not common, the adapter could be asking for a full 500ma even though it doesn't require it or is having some other isb negotiations headbutt with your gs2.
you can also try popping open a console terminal and checking what's happening under the hood. you should be able to see in the output of dmesg when you connect the adapter and what the kernel is saying about it, which will help point you in the right direction.
--fg
Is there a way to mount say a jump drive or a card reader to the usb port of my phone without requiring a y cable and an external powersource? Ya know, making the usb port provide power?
Sent from my SGH-T889 using Tapatalk 2
prepaidguy9081 said:
Is there a way to mount say a jump drive or a card reader to the usb port of my phone without requiring a y cable and an external powersource? Ya know, making the usb port provide power?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I can get a single thumbdrive to maount. Useing a homemade microUSB OTG adapter. Mine was straight up pin 4 jumpered to ground.
Sent from my SGH-T889 using Tapatalk 2
Yea I just learned that is the issue. Thankyou
Sent from my SGH-T889 using Tapatalk 2