make s-off(Downgrade 6.01.605.05), after the firmware is loaded normally, but after turning off the phone or perzagruzki he stupidly reboots endlessly, solve a full reset and the new phone settings, and so constantly, need help
You need to flash a newer radio.
Sent from my SCH-I535 using xda app-developers app
GoonAssJuan said:
You need to flash a newer radio.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
How to tell me more please
apshel said:
How to tell me more please
Click to expand...
Click to collapse
I had this same problem, flash a newer radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1134451
good luck!
Related
Wanna down grade to see if. It foxes my gps is ot safe?
Sent from my ADR6300 using XDA App
xyojimbox said:
Wanna down grade to see if. It foxes my gps is ot safe?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I did it and had no problems.
yes I've done it multiple times...just don't flash the same radio twice in a row or you'll have a brick is what ive read
Sent from my ADR6300 using XDA App
pete_kowalski83 said:
yes I've done it multiple times...just don't flash the same radio twice in a row or you'll have a brick is what ive read
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
That was true back when the 2.05 baseband was leaked as a patch file. However, now we're working with full versions.
Make sure that your are also resetting your PRL after flashing the radio or it might not be doing as much good as it can.
To reset dial *228 after radio flash and then select option 2.
Sent from my dINC... :0
I flashed the new amon 2.2 recovery and decided i didnt like it so i flashed the old amon 1.8 after flashing back to 1.8 i cant get a rom to boot up ive tried flashing new roms restoring old nandroids anything. i was gonna flash back to 2.2 recovery but i cant get it to flash without the computer recognizing my phone for adb commands. the phone only gets stuck on my splash screen and freezes
any help?
bump
10 chars
can you get into recovery?
craigbailey1986 said:
can you get into recovery?
Click to expand...
Click to collapse
yes i can and it will flash a rom but still wont boot it it just sticks on the splash
skndeep102 said:
yes i can and it will flash a rom but still wont boot it it just sticks on the splash
Click to expand...
Click to collapse
I was having the same problem today and yesterday.. try Sprint lover Rom.. that's the only one that flashed for me.
Sent from my PC36100 using XDA App
Also you can do adb by going into recovery and hit enable usb
Sent from my PC36100 using XDA App
craigbailey1986 said:
I was having the same problem today and yesterday.. try Sprint lover Rom.. that's the only one that flashed for me.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ill give it a try did everything work afterwards?
skndeep102 said:
ill give it a try did everything work afterwards?
Click to expand...
Click to collapse
Yes but I am still having issues flashing new kernels so I am looking into clockwork
Sent from my PC36100 using XDA App
craigbailey1986 said:
Yes but I am still having issues flashing new kernels so I am looking into clockwork
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ok ive got the new hboot i didnt think that clockwork was compatible
skndeep102 said:
ok ive got the new hboot i didnt think that clockwork was compatible
Click to expand...
Click to collapse
I don't know... but I am looking into the problem and if I find anything I will let you know
Sent from my PC36100 using XDA App
craigbailey1986 said:
I don't know... but I am looking into the problem and if I find anything I will let you know
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
the PC36 worked I'm gonna mess with it later. at least i have a working phone again.
skndeep102 said:
the PC36 worked I'm gonna mess with it later. at least i have a working phone again.
Click to expand...
Click to collapse
That's good to hear
Sent from my PC36100 using XDA App
I'm about to downgrade to froyo to get s-off and I need to know if you have to reactivate afterwards
Sent from my ADR6300 using xda app-developers app
zachf714 said:
I'm about to downgrade to froyo to get s-off and I need to know if you have to reactivate afterwards
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
I didn't when I did it.
Zimeron said:
I didn't when I did it.
Click to expand...
Click to collapse
Thanks Zim
Sent from my ADR6300 using xda app-developers app
Zimeron said:
I didn't when I did it.
Click to expand...
Click to collapse
Did you boot loop after the froyo dwngrde. Just want to know about to get s-off
Sent from my ADR6300 using xda app-developers app
zachf714 said:
Did you boot loop after the froyo dwngrde. Just want to know about to get s-off
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Nope, it went fine for me.
musical_chairs said:
Nope, it went fine for me.
Click to expand...
Click to collapse
OK thanks
Sent from my ADR6300 using xda app-developers app
zachf714 said:
Did you boot loop after the froyo dwngrde. Just want to know about to get s-off
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Nope, stock was nice and stable. I then used the froyo exploit (z8 or something?), installed rom manager and flashed the zip file from Unrevoked and was back to s-off.
Zimeron said:
Nope, stock was nice and stable. I then used the froyo exploit (z8 or something?), installed rom manager and flashed the zip file from Unrevoked and was back to s-off.
Click to expand...
Click to collapse
Thanks
Sent from my ADR6300 using xda app-developers app
Starting with ZVB I will post flashable ZIPs of Radio Updates.
Please use the latest TWRP to flash these radio updates.
BACKUP EVERYTHING, INCLUDING EFS WHEN DOING RADIO UPDATES.
YOU MUST BE UNLOCKED AND BE USING THE LATEST TWRP.
I DO NOT TAKE RESPONSIBILITY FOR ANY BROKEN DEVICES, FLASH AT OWN RISK
Current Version: M9615A-CEFWMAZM-2.0.1690
ZVB Radio Update M9615A-CEFWMAZM-2.0.1690:
http://goo.im/devs/TheShadow/geehrc/RadioUpdateZVB.zip
TheShadow1 said:
Starting with ZVB I will post flashable ZIPs of Radio Updates.
Please use the latest TWRP to flash these radio updates.
BACKUP EVERYTHING, INCLUDING EFS WHEN DOING RADIO UPDATES.
YOU MUST BE UNLOCKED AND BE USING THE LATEST TWRP.
I DO NOT TAKE RESPONSIBILITY FOR ANY BROKEN DEVICES, FLASH AT OWN RISK
ZVB Radio Update:
http://goo.im/devs/TheShadow/geehrc/RadioUpdateZVB.zip
Click to expand...
Click to collapse
this is for people not on zvb correct?
javskies said:
this is for people not on zvb correct?
Click to expand...
Click to collapse
It is also for people that flashed ZVB from ZV9 with a stock rooted ROM, and did not take the radio update in the processes. You should be able to use this on ZV9 too.
TheShadow1 said:
It is also for people that flashed ZVB from ZV9 with a stock rooted ROM, and did not take the radio update in the processes. You should be able to use this on ZV9 too.
Click to expand...
Click to collapse
how would one know if they didnt take the update? would this also be a fix for my network saying chameleon?
javskies said:
how would one know if they didnt take the update? would this also be a fix for my network saying chameleon?
Click to expand...
Click to collapse
Flashing it won't hurt anything, it will just put newest radio.
TheShadow1 said:
Flashing it won't hurt anything, it will just put newest radio.
Click to expand...
Click to collapse
ok thanks!
Anyone try this out yet? Also I currently have cwm so I have to switch to team wins recovery to flash this?
Do you happen to have the version numbers for the radios? Other than zv7, zv9, zvb,
Edit. For use in "About phone"
Sent from my LG-LS970 using xda premium
Yerv Melkonian said:
Anyone try this out yet? Also I currently have cwm so I have to switch to team wins recovery to flash this?
Click to expand...
Click to collapse
I haven't tested it in CWM. All I have tested it in was TWRP. It may or may not work.
unfortunately it does not change the chameleon service.
engine95 said:
Do you happen to have the version numbers for the radios? Other than zv7, zv9, zvb,
Edit. For use in "About phone"
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Version M9615A-CEFWMAZM-2.0.1690
Added to OP
TheShadow1 said:
I haven't tested it in CWM. All I have tested it in was TWRP. It may or may not work.
Click to expand...
Click to collapse
So just back up literally everything then flash like a normal zip?
Sent from my LG-LS970 using xda premium
ncfastls1 said:
So just back up literally everything then flash like a normal zip?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Yes, through TWRP.
Sent from my LG-LS970 using xda app-developers app
TheShadow1 said:
Yes, through TWRP.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Cwm isnt compatible?
Sent via carrier pigeon
alsaces daddy said:
Cwm isnt compatible?
Sent via carrier pigeon
Click to expand...
Click to collapse
I have only tested through TWRP, so I don't know if it will work or not with CWM. I prefer you use TWRP.
Sent from my LG-LS970 using xda app-developers app
TheShadow1 said:
I have only tested through TWRP, so I don't know if it will work or not with CWM. I prefer you use TWRP.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Guess I'll flash twrp back.
Sent via carrier pigeon
Anyone have issues with wifi after flashing radio? I cant get it to connect to a wifi...
Sent from my LG-LS970 using xda app-developers app
I can't connect to wifi either.
Sent from my LG-LS970 using Tapatalk 2
You may need to reflash the boot,img for your software version. Also clear cache
Sent from my LG-LS970 using xda app-developers app
TheShadow1 said:
You may need to reflash the boot,img for your software version. Also clear cache
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I tried clearing cache and dalvik, reflashed, redownloaded and reflashed. Still no go, i didnt back up system before on accident lol but im gonna flash jellybean here shortly so hopefully that will clear it
Sent from my LG-LS970 using xda app-developers app
Please don't tear me apart if this is the wrong thread...
So I'm currently running CM 10.0 and I'm trying to upgrade (through CWM) to 10.1.2 stable, but I am running into a status 7 error. I have done the following (In no particular order)
-made backup and wiped phone (including cache and dalvik cache)
-flashed the latest bootloader
-double checked MD5 sum and it was a match
-upgraded to most recent CWM
-tried fixing the assertions (as highonandroid suggests)
So what am I doing wrong?
Erclark93 said:
Please don't tear me apart if this is the wrong thread...
So I'm currently running CM 10.0 and I'm trying to upgrade (through CWM) to 10.1.2 stable, but I am running into a status 7 error. I have done the following (In no particular order)
-made backup and wiped phone (including cache and dalvik cache)
-flashed the latest bootloader
-double checked MD5 sum and it was a match
-upgraded to most recent CWM
-tried fixing the assertions (as highonandroid suggests)
So what am I doing wrong?
Click to expand...
Click to collapse
Do a search for status 7
Because you've updated your cwm than your bootloader is out of date.
Brought up daily....
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Do a search for status 7
Because you've updated your cwm than your bootloader is out of date.
Brought up daily....
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
What do you mean do a search for status 7? I've searched all I can, those were all the solutions I came up with. First I updated CWM, then I fixed the assertions, then I redownloaded it for a clean start and then flashed the latest bootloader, and none of that worked.
Erclark93 said:
What do you mean do a search for status 7? I've searched all I can, those were all the solutions I came up with. First I updated CWM, then I fixed the assertions, then I redownloaded it for a clean start and then flashed the latest bootloader, and none of that worked.
Click to expand...
Click to collapse
Are you on a Canadian carrier?
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Are you on a Canadian carrier?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No I am on AT&T
Erclark93 said:
No I am on AT&T
Click to expand...
Click to collapse
If you're on at&t than you can try the latest twrp.
What bootloader did you flash?
Sent from my SGH-I747 using xda app-developers app
I'm on I747UCDLK3
Do you really think I need to use TWRP? Because I'm perfectly happy with CWM and have never had any problems up until now with flashing a new ROM
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Erclark93 said:
I'm on I747UCDLK3
Do you really think I need to use TWRP? Because I'm perfectly happy with CWM and have never had any problems up until now with flashing a new ROM
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well this is the issue. Status 7 is
Out of date recovery
Out of date bootloader
So you have no other options really...
So you can see my concern and attempt at grasping at straws to help.
Sent from my SGH-I747 using xda app-developers app
Ok understood. I guess I can give TWRP a shot and I'll keep you posted.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Erclark93 said:
Ok understood. I guess I can give TWRP a shot and I'll keep you posted.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Only other thing I can think of is you flashed the modem not the bootloader
Sent from my SGH-I747 using xda app-developers app
Well my baseband changed when I flashed it (brace yourself for a potentially dumb question(s) ) so did I flash a bootloader or a modem? Also what's the difference?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Erclark93 said:
Well my baseband changed when I flashed it (brace yourself for a potentially dumb question(s) ) so did I flash a bootloader or a modem? Also what's the difference?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You can have an old bootloader and have a newer modem.
Modem is your current baseband.
Here's an example. My bootloader is LK4 which is good for flashing and my modem (baseband) is MF1
Go in terminal emulator and type
su
getprop ro.bootloader
It'll tell you your bootloader if it's different than your baseband
Sent from my SGH-I747 using xda app-developers app
And now is where I feel like an idiot...
The bootloader does not match my baseband, so since I am clearly incapable of flashing a new bootloader, can you provide me with a link that would help? Preferably one that could work with mobile Odin since access to a computer is limited for me right now
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Erclark93 said:
And now is where I feel like an idiot...
The bootloader does not match my baseband, so since I am clearly incapable of flashing a new bootloader, can you provide me with a link that would help? Preferably one that could work with mobile Odin since access to a computer is limited for me right now
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ding ding ding we finally have a winner.
Chainfire doesn't recommend flashing a bootloader with mobile odin.
This thread has a recovery flashable bootloader you can use
Edit... Help if I have the link
http://forum.xda-developers.com/showthread.php?t=2321310
Sent from my SGH-I747 using xda app-developers app
And would you look at that
Running 10.1.2 smooth as butter, thanks for your help
Sent from my SAMSUNG-SGH-I747 using xda app-developers app