Upgraded E973 from 10H to 20H, rotted with ZV9-ZVB-Root. The camera app shots upside down in "landscape" mode. Am I unique? and what tot do?
Thanks.
PS: Phone does not (always) recognise existing contacts.
Related
I wanna try AOSP 4.4 ROMS but first I want to get back to F180K fw but I can't seem to get things work. Even to the point of soft bricking my LGOG. But I still cant KDZ F180K fw. It always say low batt error even on full charged phone. Even tried swapping the phone modes in the flashtool, but to no avail.
Any thoughts that can help will be very much appreciated.
Sent from my LG-E975 using xda app-developers app
I rooted my lg optimus g (e970) and removed a bunch of the preinstalled apps that are supposed to be unremovable such as youtube and the at&t navigator, etc. I then set the cpu to be about 900 (no idea what that means but I think it was ghz). I restated my phone to see if the boot up would increase but it says "security error" under the LG logo and won't turn on. I don't care if I have to reset everything I just don't want to have to take it to an at&t place or get it replaced! I backed all of the stuff I cared about up.
Flash KDZ Stock ROM
Hey everyone,
I am needing assistance on what ROM is good to run for my T-Mobile LG G3, unlocked device, on AT&T? Just to get it going, I wiped everything, including external SD, and had to run the flash tool and go with the C (stock) rom, then rooted with Stump root. I installed Dirty Unicorns, to get it going, but quickly ran into trouble.
Battery doesn't display correctly (100% all the time) and, I know its a feature thing, but when I Google search for numbers to call and click on numbers, it doesn't auto place them in the call screen. Also, my phone will randomly lose all cell signal (maybe its a modem issue??). When it loses signal it shows, to me, every possible APN in the world. When it is working, it only shows AT&T APNs.
Again, just looking for some guidance with anyone with knowledge of going to AT&T. Even pointing me in the right direction would awesome. Thanks in advance guys.
-Oscar
showbo said:
Hey everyone,
I am needing assistance on what ROM is good to run for my T-Mobile LG G3, unlocked device, on AT&T? Just to get it going, I wiped everything, including external SD, and had to run the flash tool and go with the C (stock) rom, then rooted with Stump root. I installed Dirty Unicorns, to get it going, but quickly ran into trouble.
Battery doesn't display correctly (100% all the time) and, I know its a feature thing, but when I Google search for numbers to call and click on numbers, it doesn't auto place them in the call screen. Also, my phone will randomly lose all cell signal (maybe its a modem issue??). When it loses signal it shows, to me, every possible APN in the world. When it is working, it only shows AT&T APNs.
Again, just looking for some guidance with anyone with knowledge of going to AT&T. Even pointing me in the right direction would awesome. Thanks in advance guys.
-Oscar
Click to expand...
Click to collapse
i use the stock rom from tmobile on my lg g3 but i use att service.
i found that the stock software works best for me, all i did was root and twrp, after that i used titanium backup to remove all apps and items related to tmobile then installed the stock lg g3 boot and shutdown animations so my phone is pretty much vanilla no branding except for the tmobile logo on the back cover which im ordering one that just says lg g3.
Hi, everyone.
I have just just purchased LG G2 LS980/D802 (I'm not sure) which was running on KitKat 4.4.2 perfectly but when I upgraded to Lollipop with a KDZ file (with LG flas too 2014) the screen started to act weirdly. After upgrading, on the very first screen I have to select language and go through all the procedure to activate my device but due to touch issue it was very difficult but I somehow managed to get through that process but the issue is still the same. As I touch an icon it touches the other area of the screen and an other app opens, the back, home, multi task buttons are also not working perfectly so I am in big trouble because I can not do anything thing with this set.
( I searched a lot on the internet and downloaded many KDZ and tot files and tried to get stock firmware(4.4.2) like
LS980ZV8_13 (tot)
LS980ZVA_01 (tot)
LS980ZVC_12 (tot)
LS980ZVE_03 (tot) and like so KDZ files also )
* the back cover says it is D802/ZNFD802
* I removed the back cover and on the inside body it is labelled as D801/D803
* I checked the IMEI on internet and one website says it LS980 and the other says it is D801
*=> After searching on the internet I found my phone is converted to D802 (I don't know why/how)
- I am badly stuck now and I don't know what to do because I do not have that much of knowledge to handle this issue.
- It is almost a weak i'm searching on the internet for the solution but I could not found any.
- I've also searched on this site a lot but could not found any appropriate solution ( so please do not refer me to other posts )
I humbly request all the experts, developers, members please help solving this problem I'm very much frustrated after a week of searching on the internet. Thank you.
no reply yet
i hav sm prblm
Aaryan-x said:
no reply yet
Click to expand...
Click to collapse
:crying::crying::crying: i hav sm prblm
D801,802,Ls980,Vs980,D803
Aaryan-x said:
Hi, everyone.
I have just just purchased LG G2 LS980/D802 (I'm not sure) which was running on KitKat 4.4.2 perfectly but when I upgraded to Lollipop with a KDZ file (with LG flas too 2014) the screen started to act weirdly. After upgrading, on the very first screen I have to select language and go through all the procedure to activate my device but due to touch issue it was very difficult but I somehow managed to get through that process but the issue is still the same. As I touch an icon it touches the other area of the screen and an other app opens, the back, home, multi task buttons are also not working perfectly so I am in big trouble because I can not do anything thing with this set.
( I searched a lot on the internet and downloaded many KDZ and tot files and tried to get stock firmware(4.4.2) like
LS980ZV8_13 (tot)
LS980ZVA_01 (tot)
LS980ZVC_12 (tot)
LS980ZVE_03 (tot) and like so KDZ files also )
* the back cover says it is D802/ZNFD802
* I removed the back cover and on the inside body it is labelled as D801/D803
* I checked the IMEI on internet and one website says it LS980 and the other says it is D801
*=> After searching on the internet I found my phone is converted to D802 (I don't know why/how)
- I am badly stuck now and I don't know what to do because I do not have that much of knowledge to handle this issue.
- It is almost a weak i'm searching on the internet for the solution but I could not found any.
- I've also searched on this site a lot but could not found any appropriate solution ( so please do not refer me to other posts )
I humbly request all the experts, developers, members please help solving this problem I'm very much frustrated after a week of searching on the internet. Thank you.
Click to expand...
Click to collapse
Ok I am Usman Ali mobiles phone software technician. I know your issue, if you can disassemble your phone you will find that inside your phone there is different model circuit installed, it may be 801,800,ls980,vs980 etc.. so whatever you find, then download that one firmware. and flash it. i already faced and solved this issue..
I know I have an ls980 converted to d802
I bought a d802, but when I opened the back cover, I got to know that it's an ls980 converted to d802. I wanted to install cloudy g2 3.3. Should I get rom for ls980 directly, or I have to install stock ROM first. Also if I install stock ROM, will it be sim locked? Are there any risks of phone being dead, or bricked? One of the technicians out there told me that I wouldn't be able to get the correct DLL file for stock ROM. Please help. Thanks in advance.
Hello everyone,
I bought a few weeks ago from amazon this phone: LG G4 H815 5.5-Inch Factory Unlocked Smartphone (Metallic Gold) - International Stock (No Warranty)
I know it says no warranty but I have to try. The thing is that yesterday, out of nowhere, the camera stopped working. Whenever I open the app it shows the buttons but the screen remains black. After a couple of minutes it shows the message "Cannot connect to camera".
I tried the following without success:
-Stopping the app and clearing the cache and data
-Rebooting in safe mode
-Disabling Nuplayer in the developer options
-Factory reset
Please help.
Thank you!!
Hi sorry for your problem . I have the same one . Have you resolved it and what was the problem ?
mehdinabil said:
Hi sorry for your problem . I have the same one . Have you resolved it and what was the problem ?
Click to expand...
Click to collapse
can you guys flash KDZ to stock firmware again if it continous its a hardware problem i guess.
raptorddd said:
can you guys flash KDZ to stock firmware again if it continous its a hardware problem i guess.
Click to expand...
Click to collapse
I flashed it to 5.1 h811 10n (mine is the t mobil version) via LG UP , the problem persisted . the same day i got an OTA update to MM 6.0, same problem dialer and camera don't work . I guess it's a hardware problem ; maybe the motherboard it has the infamous 506xxxxxx s/n
mehdinabil said:
I flashed it to 5.1 h811 10n (mine is the t mobil version) via LG UP , the problem persisted . the same day i got an OTA update to MM 6.0, same problem dialer and camera don't work . I guess it's a hardware problem ; maybe the motherboard it has the infamous 506xxxxxx s/n
Click to expand...
Click to collapse
mines h811 too.. well its not the infamos MB hardware failure.. as that will not boot phone... i suggest to get it repair. where did you get it..? as i see you from another country.. did you flash refurbished i=option??
I got the same issue and had to take it to service center to get it repaired. Since mine was under warranty the repair was done for free. I was told they replaced the board.
Sent from my LG-H818 using XDA-Developers mobile app