Develop Bugs

[Q] Market App Issue.

Hello, I'm having an issue with my Galaxy GIO with the market.
I Installed the market on the phone and try to launch it.
I get greeted with this message saying "You must add an account to the device to continue. Do you want to add one now?"
I tap yes and the app closes it self.
I'm using Android 2.3.7 with CyanogenMod-7.1.0-gio-RC-3.0.

Same with Gio - Cm 7.2 RC-1 P-4
Sent from my GT-S5660

download gapps zip file for cm7. flash it from cwm recovery. upon restart it will ask you to add your Google account. enter your details and then market will work
Sent from my GT-S5660 using XDA App

samydroid said:
download gapps zip file for cm7. flash it from cwm recovery. upon restart it will ask you to add your Google account. enter your details and then market will work
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
I tried that but the app didn't show up in my phone

Jogzi said:
I tried that but the app didn't show up in my phone
Click to expand...
Click to collapse
gapps won't show up as an app. go to settings - a/cs &, sync - add a/c and check if Google option is there or not.
Sent from my GT-S5660 using XDA App

samydroid said:
gapps won't show up as an app. go to settings - a/cs &, sync - add a/c and check if Google option is there or not.
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
Nope, dosen't have that option.

Jogzi said:
Nope, dosen't have that option.
Click to expand...
Click to collapse
Did you enable dt-app2sd before flashing gapps?

samydroid said:
Did you enable dt-app2sd before flashing gapps?
Click to expand...
Click to collapse
No i don't think so. Where is that located ?

Jogzi said:
No i don't think so. Where is that located ?
Click to expand...
Click to collapse
Well that's good that you didn't do that. I have flashed CM7.1 quite a few times and as soon as I finish flashing it, I flash gapps and it works flawlessly.
I'm unable to figure out your issue. So, all I can suggest you is to backup any important data, wipe data + wipe cache and then flash gapps again (you may try re-downloading it from http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps).
Or wait for someone else to help you.

Alright then. I'll wait for another person to reply with another fix.

Jogzi said:
Alright then. I'll wait for another person to reply with another fix.
Click to expand...
Click to collapse
I had this too, even with gapps installed.. I fixed it by going back to stock, flash cm 7.2 and download gapps again,, make sure you use px-cwm-v2.zip as cwm recovery, mount system, clear data, cache, and make sure gapps.zip is on your root of your sd card..
Then flash them again
Sent from my GT-S5660 using xda premium

Did you mount system and data in recovery before flashing gapps?
Sent from my Galaxy Tab 7'' GT-P1000 running CM9 (ICS)

[Q] GAPPs on cyanogemod broken

I have an ATT Galaxy SIII running the latest build of cyanogenmod (cm-10.1-20130225-NIGHTLY-d2att)
I downloaded GAPPS (the latest one that supports jellybean 4.1.1) gapps-jb-20120726-signed
now whenever I turn on my device it says "com.google.process.gapps has stopped working" a few times then it just keeps saying "Unfortunately, Setup Wizard has stopped." and every time I hit OK a new one just pops up. I cannot access settings or any other app for that matter.
Anyone know how to fix this? If I could get it back to complete factory default, that would be fine too.

Epicblood said:
I have an ATT Galaxy SIII running the latest build of cyanogenmod (cm-10.1-20130225-NIGHTLY-d2att)
I downloaded GAPPS (the latest one that supports jellybean 4.1.1) gapps-jb-20120726-signed
now whenever I turn on my device it says "com.google.process.gapps has stopped working" a few times then it just keeps saying "Unfortunately, Setup Wizard has stopped." and every time I hit OK a new one just pops up. I cannot access settings or any other app for that matter.
Anyone know how to fix this? If I could get it back to complete factory default, that would be fine too.
Click to expand...
Click to collapse
You are using an outdated gapps. CM10.1 is based on 4.2.2 not 4.1.2
You need to download the 12/12/12 gapps for them to properly work.
Sent from my SGH-I747 using xda app-developers app

RPelham said:
You are using an outdated gapps. CM10.1 is based on 4.2.2 not 4.1.2
You need to download the 12/12/12 gapps for them to properly work.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks so much, ill try that now.
Edit:
Thanks a lot, works now

Any 4.2.2 ROM makes my camera crash

Hello,
I'm sorry if this is a repost of any sort . I am currently running a 4.1.2 rom and as it turns out any 4.1.2 rom that I run will have a functioning camera for my phone. However whenever I try to flash any 4.2 .2 rom on my phone the camera ceases to run correctly. I'm flashing the rom with clockworkmod touch and I have also tried flashing a camera fix I found on xda. I have even tried using third party camera apps, but those don't work either. Can anyone try to point me in the right direction or even try to help me troubleshoot this thing??
Thanks in advance
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?

Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

xBeerdroiDx said:
i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?
Click to expand...
Click to collapse
I had just updated cwm to the latest touch version about a month ago. After that I was still on stock TW 4.1.1. Then, I tried flashing a 4.2.2 jellybam v7.6 and the camera stopped working so I flashed back to stock and the camera worked fine. I then tried flashing to the latest realease of CM 10.1 nightly
about 3 weeks ago but the camera didnt work so I flashed to 4.1.2 CSROM v1.4 then 1.5 and the camera worked fine. So I then tried CM10.0 4.1.2 and the camera still worked so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Cprager said:
Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I did and it still works. So it can't be a hardware issue. It has to do with how my phone flashes the software because I haven't seen anyone else having the same issues with the ROMS that I have been flashing.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

AaronYoLungz said:
so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Click to expand...
Click to collapse
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.

xBeerdroiDx said:
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.
Click to expand...
Click to collapse
Well before I flashed any rom I always wiped all user data, I wiped the cache and dalvik cache and in some cases I even formatted the system in advanced settings. In every case the camera never worked.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

If it could help, I can get a report of the crash... The only thing is I would need guidance on going about getting it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

i would back everything up. you have a working nandroid to fall back on?
then i would fully wipe the device and start over. you seem to be having problems with 4.2.2, not specifically aosp. it appears aosp and touchwiz 4.1.1 and 4.1.2 are working for you. correct? when transitioning android versions, its basically required to wipe everything in order to avoid issues. make sure you have the latest gapps for 4.2.2. that may be your problem right there.
in the event you choose to wipe and reflash a 4.2.2 rom,
- backup your files
- have a nandroid, the rom you want and gapps on a micro sd card.
- boot into recovery
- wipe data/factory reset
- wipe cache
- wipe dalvik
- format /system
- format /data + media
- flash rom from external sd card
- flash gapps from external sd card
- reboot and let your phone sit a few minutes then reboot again. check it out.
you wont get any ROM support from devs on your issues until you come from a complete wipe. a hassle to set everything up again but it will likely be your fix. if not, we can go a different direction.

Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

AaronYoLungz said:
Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted

xBeerdroiDx said:
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted
Click to expand...
Click to collapse
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.

AaronYoLungz said:
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.
Click to expand...
Click to collapse
what ROM and release did you end up flashing?

xBeerdroiDx said:
what ROM and release did you end up flashing?
Click to expand...
Click to collapse
ROM: cm-10.1-20130521-NIGHTLY-d2att
Gapps: gapps-jb-20130301-signed
EDIT: The problem described in the post#11 has always been the case

i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back

xBeerdroiDx said:
i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back
Click to expand...
Click to collapse
Should I remove Gallery4.apk and Gallery2.apk from /system/app?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be

xBeerdroiDx said:
You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be
Click to expand...
Click to collapse
Alright so I ended moving the gallery, then flashing the new camera app in CWM then wiped the cache and dalvik. No luck, so I tried restarting my phone, fixing permissions, and nothing worked. I then full wiped my phone and flashed Vanilla Rootbox, tested camera and it didnt work. It still said "Camera Error- Can't connect to camera" . . I flashed the camera zip provided followed by a cache and dalvik wipe but I got the same message. Following the above steps I did the exact same thing with AOKP and the exact same thing happened.
Is it possible that my phone just can't support 4.2.2?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Is it possible that an outdated version of Odin could be the problem?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

gapps don't work on cyano 10.1

Hello .. i have a problem with my galaxy s i 9000. I followed all the steps to instal cyanogenmod 10.1, everything went good , the phone after reboot was working, i could acces the menu but after i installed the zip Gapps when i open the phone it gives errors and i can't acces any aplication from google. It appears on the display "unfortunately google search has stopped" or "setup wizard has stopped". The gapps are the right one for this type of cyano, i've cheched it on the site. Can you help me with a solution? Thank you

Try wiping everything in recovery then flash your Rom then right after that flash your gapps then reboot.
Sent from my HTC Velocity 4G using Tapatalk 4 beta

Wiping should definitely work, but you'll have to restore files and settings somehow.
If you're an Android developer, but may want to check the logcat output and see why the apps crash. Maybe it's just a permissions problem (could be solved by CWM) or so.

Also try the gapps package from goo.in with the correct exact version of u r rom......
Sent from my Xperia U using xda app-developers app

[Q] CM 10.2 Team Canjica: TeamCanjica-OTACenter has stopped

Today I installed the actual version (from 28th of February) of CM 10.2 brought to us by Rox.
I installed the I8160P version.
After that I get this error message after every reboot: "TeamCanjica-OTACenter has stopped"
I cleared the cache befor installing the new version of 10.2. Before that I used 10.2 from 4th of January.
That does this error message mean? What is the problem? How can I get rid of it?

Give me logcat i will do my best
Sent from my GT-I8160 using Tapatalk

Here is my logcat:
http://pastebin.com/mJgB1qxK
I hope this helps!
Thanks for your great work, Rox!

Additional Info:
I startet the app TeamCanjica-OTACenter manually and allowed permanent superuser for it.
In the tab "Updater" I find the error message in red: Cannot read TeamCanjicaOTA properties.
Following the hints in the main development thread I looked up the string "teamcanjica.ota.version=1.0" in build.prop. It does exist.

i got same problems.
http://forum.xda-developers.com/showpost.php?p=50853209&postcount=3113

Delete that app. It was only testing. I will delete it in next version...
Sent from my GT-I8160 using Tapatalk

i disabled it !!
how can i uninstall it !?

matthias1976 said:
i disabled it !!
how can i uninstall it !?
Click to expand...
Click to collapse
remove in /system/app

teddytsen said:
remove in /system/app
Click to expand...
Click to collapse
hi guys.. sorry i was kinda late for this, I just flashed cm10.2 and im getting the same error.. so the only solution is to remove the app? so how are we goin to update or know if there is an update in our cm10.2 if ever?
and I dont wanna create new thread about this so im just goin to ask it here,
C10.2
cm-10.2-20140227-UNOFFICIAL-codina.zip
gapps
CM10.2.x - 4.3.0 - 20130813
this where the one i flashed on my ace 2. my question is, will there be a problem if I flash the wrong gapps? for example i flashed CM10.2 and then used the gapps for CM10.1?
2nd question is gapps - stands for google apps? if it is does it mean it gapps are optional? if i dont flash the gapps there wont be any apps installed? like a clean format right? cos all the pre-installed apps in CM10.2 are downloadable at playstore right?
@Rox

1. Keep up on cm10.2 thread
2.yes probably fcs
3.
Yes
Yes
No, some apps for ex cam are there.
No., of course not... XD
Sent from my GT-I8160 using Tapatalk

teddytsen said:
1. Keep up on cm10.2 thread
2.yes probably fcs
3.
Yes
Yes
No, some apps for ex cam are there.
No., of course not... XD
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
thanks
although i have to trace which answer is yes and no LOL :laugh:
ohh another question, if ever there's been an update in that thread, I just need to flash the new update like what I did when I 1st installed my CM10,2 right?
I mean I have to flash the CM10.2(neew update) and the gapps again?
and flashing means i need to backup all my data coz it'll get erased?
correct me if Im wrong..
I also noticed the performance menu in system settings although i haven't change anything in it yet, I just wanna ask a link for a thread if there is where I can study what's governor, I/O scheduler etc? sorry I'm not really familiar with this forum yet..
and thanks again you've been very helpful :good:

I have the P version and i have the same problem.
Can I delete the app using Titanium backup or SD maid?Is it safe?Will it affect stability?

DarnJhud said:
thanks
although i have to trace which answer is yes and no LOL :laugh:
ohh another question, if ever there's been an update in that thread, I just need to flash the new update like what I did when I 1st installed my CM10,2 right?
I mean I have to flash the CM10.2(neew update) and the gapps again?
and flashing means i need to backup all my data coz it'll get erased?
correct me if Im wrong..
I also noticed the performance menu in system settings although i haven't change anything in it yet, I just wanna ask a link for a thread if there is where I can study what's governor, I/O scheduler etc? sorry I'm not really familiar with this forum yet..
and thanks again you've been very helpful :good:
Click to expand...
Click to collapse
No. When flashing an update to the rom, you can just flash it without wiping data thus data wont be erased.
No need to flash gapps again.
Sent from my GT-I8160 using xda app-developers app

valdemart said:
Today I installed the actual version (from 28th of February) of CM 10.2 brought to us by Rox.
I installed the I8160P version.
After that I get this error message after every reboot: "TeamCanjica-OTACenter has stopped"
I cleared the cache befor installing the new version of 10.2. Before that I used 10.2 from 4th of January.
That does this error message mean? What is the problem? How can I get rid of it?
Click to expand...
Click to collapse
When you first install cm 10.2 you do it from a non-p rom, if yes please tell me how
Thanks

arhamiq said:
No. When flashing an update to the rom, you can just flash it without wiping data thus data wont be erased.
No need to flash gapps again.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
so all i need to do is flash CM10.2 update, no need to wipe anything and reset factory?

DarnJhud said:
so all i need to do is flash CM10.2 update, no need to wipe anything and reset factory?
Click to expand...
Click to collapse
flash cm10.2 and gapps then wipe cache and reboot

teddytsen said:
flash cm10.2 and gapps then wipe cache and reboot
Click to expand...
Click to collapse
no, we're talkin about when flashing an update (10.2(january) to 10.2(feb)). do u still need to wipe/reset factory and flash gapps?

DarnJhud said:
no, we're talkin about when flashing an update (10.2(january) to 10.2(feb)). do u still need to wipe/reset factory and flash gapps?
Click to expand...
Click to collapse
No need to wipe data or reflash gapps!
Just clear the cache and flash the update.