I broke the lcd on my Inc2, so i bought a new one and installed it and the screen works great visually. But for some reason only the top half works when i touch it. I have read about the diag nbh file but i can only find it for in the IncS. I tried factory reset and going back to complete stock to no avail. Does anyone have any solution or ideas that i can try??
Looks like a faulty digitizer to me.. May have been damaged during the install too..
Sent from my Nexus 7 using xda app-developers app
I was thinking that also, but the problem is idk how I would be able to find out if it is faulty.
There's a kink in the ribbon cable
Sent from my Incredible 2 using xda app-developers app
First time I replaced my digi I had to open it up again , the connections are very sensitive , they have to fit in the clip perfectly, try re connecting the ribbons and make sure the pins go into the right spot . at least then you'll know if its defective or not
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
I don't think you want my advice.
Related
I replaced my digitizer due to my cracked screen. When i power up the phone all i get is a solid white screen. The phone was rooted, but i do not have the SD card that i used at the time. Does this make a difference? what can i do? I am terribly frustrated as i need my phone for my business. I would greatly appreciate the help!
Make sure all 3 ribbon cables are connected properly. And did you by some chance crack the LCD also?
Sent from my Rooted Google Nexus 7 using XDA Premium HD
speedygonzo said:
Make sure all 3 ribbon cables are connected properly. And did you by some chance crack the LCD also?
Sent from my Rooted Google Nexus 7 using XDA Premium HD
Click to expand...
Click to collapse
All three cables are properly inserted yet i still cant seem to get it to work. All i get is a blank white screen. No i did not crack the LCD. I appreciate the reply!
Hi.
My Defy touch screen is totally dead, it's not responding to anything...
tried with another touch screen... same... hard reset... same
I think there is no way to fix it.. so anyone who got a used but working motherboard and willing to sell it
please contact me. Thanks
by the way if i'm wrong and somebody knows howt to fix it.. please tell me
Did you replace the digitizer or the LCD? If you replaced LCD then its of no use. Replace the digitizer.
Sent from my MB526 using xda app-developers app
kadavil said:
Did you replace the digitizer or the LCD? If you replaced LCD then its of no use. Replace the digitizer.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Yep, i replaced the digitizer not the LCD... nothing changed still not responding
maybe u can put your phone into your fridge for one night.it works on some phones around me
Sent from my MB525 using xda app-developers app
I used to have the same problem but only when sdcard inside.
http://forum.xda-developers.com/showthread.php?t=1737994
Sent from my HTC Sensation using xda app-developers app
Do I need just the top screen and the digitizer? Does anyone know what the part no. on amazon would be. Thanks
Sent from my HTC Sensation using xda app-developers app
Is the digitizer okay? Responds to touch and isn't damaged? If so, then all you'll need is the glass and a lot of patience.
Sent from my SGH-T999 using xda premium
If all you need is the screen, they run about $15 on eBay. I would suggest watching a few youtube videos of the replacement unless you've previously done so.
And that ladies and gentlemen is why cases are available for purchase. Seriously though, you need some sort of protection for an expensive device like the S3 or the S4. Protect your investment and get a case next time to prevent damage from falls.
See tutorial here.
broke screen need the data
rp56 said:
Do I need just the top screen and the digitizer? Does anyone know what the part no. on amazon would be. Thanks
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I tried to replace the screen and I broke the digitizer. I got the replaced through insurance but is there any way to retrieve the data from the old phone with the digitizer being broken??? The phone cuts on and when I plug it into the computer it recognizes it as a camera and shows no files. I tried kies but it says I need to unlock the phone which I cant. Any help is appreciated.
I retrieved my data on my old phone by takomg both phones apart trading out the motherboards amd copying tbe old files to my computer. Them I swapped the motherboards back. The whole process took about 30 min.
Sent from my SGH-T999 using xda app-developers app
I have two epics, one with broken USB port and the other with cracked screenand messed up LCD. Which would be easier to fix? I'm just gonna use one of these two fix the other. I'm guessing the USB port is easier but maybe just switching the whole top sliding part to fix the screen may be easier?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
You can't take out the usb port by itself but you can switch the motherboards so that the one with the good usb is on the one with the good screen. Remember to switch the stickers on the back also
I've done this.
Easily take out the circuit board of the broken screen epic and put it in the one with a good scree..and switch the esn stickers.
I've had like 5 epics already lol
Sent from my SPH-D700 using xda app-developers app
Hello all. My screen and digitizer was broken, so i change them, but at now i have problem with screen. the top of screen 1/4 not working . Can someone help me?
Sounds like you put in a faulty digitizer, either that or you could have some how messed up the new one during installation.
I would see if the seller will give you a replacement as more than likely it is not your fault
Best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app