[HELP] Apple Magic Mouse & Apple Magic Trackpad Issues - Galaxy Note II Q&A, Help & Troubleshooting

Hi, has anyone else had this problem where i connected my Apple Magic Mouse & Apple Magic Trackpad and it will successfully connect to the Note 2 and shows up as "Connected to Input Device" BUT for some odd reason the Mouse pointer WILL NOT show up! I have tried to Google and find out the solution to the problem but have come across nothing to help me. Also if i connect either device to my Galaxy Note 10.1 they work perfectly. Anyone know how to fix this?

Related

[Q] Bluetooth issue

I'm not sure if this is a problem with Wondows 8 or a problem with Jelly Bean but...
I have a windows 8 tablet (Samsung ATIV 700T) and I can connect a bluetooth mouse to it no problems.
I can search and find my note 2 from the tablet and when I click to connect the same confirmation number comes up on both the tablet and the phone.
But the connection just stays as paired and doesn't go to connected? Any ideas why they won't connect? My S2 that was on 4.1 also couldn't connect. The wireless mouse works no worries with the tablet. the mouse also connects with my note 2 as well. But for some reason the tablet and phone see each other and can but only pair and not connect.
Any ideas??? Google doesn't seem to filter enough for me to find anything directly related unfortunately.
I'm hoping to bluetooth tether my internet from my Note 2 to the windows 8 tablet.
Tethering with wifi works well but it sucks more power than if I did it through bluetooth. Any I assume bluetooth wouldn't bottleneck the data speeds too much anyway.

[Q] Magic Color V 1.0 Wifi Led Controller Application.

Hi folks,
Did a quick search and found no direct hits for my issue. I have a Wifi led controller and the supplied android application Magic Color V1.0. When started it prompts me with a message that my phone is not connected to the controller via Wifi. I am connected , i tried to remove/reinstall with the same results. It also came with an apple OSX version which i installed on an ipod touch and it worked from the start. I'd rather use my Note 2 with the large screen instead. I am currently rooted running 4.3 Anyone else have any luck getting Magic Color to run? Any suggestions would be greatly appreciated. BTW, I emailed the developer and unfortunatley have not seen any response. Thanks

Root and Bluetooth?

I am hoping someone can answer this for me. Will the recently released root capabilities allow me to connect a Bluetooth keyboards that requires a password? This is something that the Fire TV couldn't do previously.
looks like you posted on reddit as well,
http://www.reddit.com/r/fireTV/comments/28d8sm/root_and_bluetooth/
I wonder if I could get my Vizio Costar remote to work?....
wavrunrx said:
looks like you posted on reddit as well,
I did. I wasn't sure where I'd get the faster response.
Click to expand...
Click to collapse
Bluetooth Keyboard with built in touchpad
I am also very interested in this....
Is it possible to get the bluetooth settings to work with my motorolla keyboard and touchpad combo (Motorolla KZ500)? I get it to pull up the settings to see the keyboard and prompt to type in numbers but it doesnt receive anything I input at this step.
I will keep trying and let OP know if I find anything, but I am not a real android dev by any stretch.
I got my Logitech PlayStation 3 Cordless MediaBoard Pro to link with a generic usb dongle. It is great because it has a mouse pad built in
Got it to Connect - But not functional
I succeeded at getting the Motorolla KZ500 keyboard & touchpad combo to connect to the Fire TV through the use of the android settings.apk and typing in the numerical prompt. - I am on the latest firmware and am rooted now, if that matters.
However, despite showing up as an input device, no keypresses or mousepad movements are registering with the device. Does anyone know what could be wrong?
When I use a USB keyboard and mouse, it has no problem registering all of that.

[Q] Microsoft Display Adapter

My Tab S 8.4 can not connect to the New Microsoft Display adapter yet my Galaxy S5 can and does so very well if I might add. Anyone else have the same problem or know how to fix this issue? I have already done all of the updates available for my Tab S which is what the manual said to do before I try and connect it to the display adapter and it will not connect. It only sits there and goes through a cycle of trying to connect and my TV screen going blank like it does right before it connects to my GS5 but it goes right back the connection screen from the beginning and does it again and again a few times and then my Tab S says connection error. It makes me so mad and I am thinking about returning it but I really like how it works on my phone I just really wanted it to connect to my Tab S. If anyone can help me figure this out I would be so very thankful!:good:
same thing
Having the exact same issue. Did you figure it out?

[Q] Galaxy Tab Pro 8.4 (CM11) attaching Bluetooth Keyboard and Mouse

I'm hoping someone can assist me with troubleshooting this issue. My wife's tablet is a Galaxy Tab Pro 8.4 running CyanogenMod 11, that we recently decided to attach a bluetooth keyboard and mouse to. The mouse is a Microsoft Sculpt Comfort Mouse and the keyboard is a Logitech K480. She was able to pair both devices initially, but ever since has had trouble getting both to be paired. It seems as if the last connected bluetooth device is the only one that connects after a power cycle. I've also noticed that the mouse for some reason shows up as a Physical Keyboard (see screenshot for reference).
What I've tried so far:
-Using Bluetooth Auto Connect , which didn't seem to make a difference at all.
I would hate to have to return the keyboard and purchase a physical one, so I'm willing to try a few things to get this working.
Any help is greatly appreciated.
raf051888 said:
I'm hoping someone can assist me with troubleshooting this issue. My wife's tablet is a Galaxy Tab Pro 8.4 running CyanogenMod 11, that we recently decided to attach a bluetooth keyboard and mouse to. The mouse is a Microsoft Sculpt Comfort Mouse and the keyboard is a Logitech K480. She was able to pair both devices initially, but ever since has had trouble getting both to be paired. It seems as if the last connected bluetooth device is the only one that connects after a power cycle. I've also noticed that the mouse for some reason shows up as a Physical Keyboard (see screenshot for reference).
What I've tried so far:
-Using Bluetooth Auto Connect , which didn't seem to make a difference at all.
I would hate to have to return the keyboard and purchase a physical one, so I'm willing to try a few things to get this working.
Any help is greatly appreciated.
Click to expand...
Click to collapse
I'm having the same problem on my Tab Pro 8.4 running CM12. When I was on CM11 the most worked great by itself but now it's seen as a mouse WITH physical keyboard. This expensive mouse is now useless and it's been far to long to return it. It was great for Teamviewer sessions but not any more. I've tried paying in the CM12 thread for the Tab Pro but I received no responses.
I'm having the also problems on my Tab Pro 8.4 (LTE) running (inofficial) CM12 or RessurectionRemix 6.0.1_r66.
Running RessurectionRemix 6.0.1_r66 I am able to connect a Bluetooth Keyboard. Pairing my "Logitech MX Anywhere 2" Mouse also works, but there is no Pointer moving and no mouse-button is working. My next step is trying to connect any Mouse via USB-OTG.

Categories

Resources