Expensive paper weight? - Droid Incredible Q&A, Help & Troubleshooting

Just rooted and got s-off. Decided nows prime for a new rom. Downloaded touch of blue v3.0. Placed it on root of internal sd card. Biot into fastboot then to recovery. From there I trid to flash it choose zip from sd. Aborted something about a code 7. Been afraid to look. On my captivate it was that simple. Dowload to root of internal sd flash through recovery. Is that proper for dinc?
Note 2, yeah son!

phoenixfriend said:
Just rooted and got s-off. Decided nows prime for a new rom. Downloaded touch of blue v3.0. Placed it on root of internal sd card. Biot into fastboot then to recovery. From there I trid to flash it choose zip from sd. Aborted something about a code 7. Been afraid to look. On my captivate it was that simple. Dowload to root of internal sd flash through recovery. Is that proper for dinc?
Note 2, yeah son!
Click to expand...
Click to collapse
Status 7 isn't something to worry about. Your phone is fine. What are the details of your error?
Sent from my Galaxy Nexus using Tapatalk 2

I cant recall. I can get to hboot and to recovery. The phone died after an all day boot loop as I slept. Ill charge it in a few and get back to you. Maybe like 45 minutes.
Note 2, yeah son!

Reflashed this is what the screen says.
Note 2, yeah son!

Hey tiny, do you know why this happens. I keep getting people saying that there getting status 7's, but when i flash it it works just fine. Could it be caused by people not wiping as instructed in the roms thread?

cmlusco said:
Hey tiny, do you know why this happens. I keep getting people saying that there getting status 7's, but when i flash it it works just fine. Could it be caused by people not wiping as instructed in the roms thread?
Click to expand...
Click to collapse
They could try TWRP but honestly that status 7 - set_perm: some changes failed smells like a bad download.

Ill retry when I get home. Redownload recheck md5sums. I checked it through mini adb which is what I used to do the root downgrade and s-off. How wiuld I check it once I move it from the comp to the phone?
Note 2, yeah son!

Md5sums are the saame while on the comp. Ill try to do a full wipe from recovery. Just to make sure it wasnt a dirty flash. Though im not sure how to check the md5sums after I put it on the phone.
Note 2, yeah son!

I didnt fully read the flash instructions. It was a dirty flash. It is now work. Thanks.
Sent from my ADR6300 using xda app-developers app

phoenixfriend said:
Though im not sure how to check the md5sums after I put it on the phone.
Note 2, yeah son!
Click to expand...
Click to collapse
I use astro file manager. Just find the file on the SD card long press and hit properties
sent from my ADR6300 Droid Incredible

Related

Friend messed up install of AOKP - please help

Hey guys,
I'm doing a favour for a friend. he got a Galaxy Nexus last week, tried to flash AOKP and messed up - I'm gonna try and fix it for him while he's away for the week. I've posted this on the AOKP forum but xda is where I live so I figured I'd see what you guys thought.
So the basic situation is -
He went to unlock the bootloader after he bought it and got "error - already unlocked", so he thought, cool, it's unlocked. Flashed root, installed ROM manager, flashed latest version of CWM permanently.
Didn't make a Nandroid backup, because he's an idiot.
Went to install the GSM maguro build 37 version of AOKP, flashed that and gapps
Now the phone won't boot and gets stuck at the pink unicorn screen. It's not a bootloop, it just shows the pink unicorn for infinity.
I've flashed a few roms on my device in my time (HD2, Sensation) but I've never owned a Galaxy Nexus. If this was me I'd just put another rom on the SD card and try again. But it's not removable, recovery gives me an error of "unable to open ums lunfile (no such file or directory)" when I try and mount USB storage in CWM.
Even if I could put another ROM on there, I've got no idea what he's done wrong, as from what I can figure out the GSM build 37 of AOKP should be booting fine.
Basically I'm at a loss and I really want to help him out - can anyone offer any advice?
Thanks for reading,
EDIT: forgot to mention we're in Australia and he purchased the Galaxy Nexus from Vodafone if that makes any difference
If he has the recovery flashed then with the power off hold volume up and power to get into bootloader
Sent from my Nexus S 4G using Xparent Purple Tapatalk 2
Reflash the stock rom and go from there. See the "flash" link in my sig.
Sent from my Galaxy Nexus using Tapatalk 2
Use adb to push the new from zip to the sdcard, you can't mount storage from cwm because the gnex doesn't use ums.
If all else fails you can flash factory images via fastboot so nothing is broken.
I don't think I was particularly clear - I don't know how to get the stock rom onto the "storage" part of the phone. When I try and toggle USB storage in CWM it gives me the error unable to open ums lunfile (no such file or directory)
Also, in fastboot, when I try and do "adb devices" it says "no device connected" even though it is connected
You don't need it in the phone storage to flash it by fastboot.
Does your PC have the correct drivers for the phone, if it doesn't adb won't find it
Sent from my Nexus S 4G using Xparent Purple Tapatalk 2
yeah it does, i downloaded the samsung ones, navigated to device manager and installed them manually
zukа said:
I don't think I was particularly clear - I don't know how to get the stock rom onto the "storage" part of the phone. When I try and toggle USB storage in CWM it gives me the error unable to open ums lunfile (no such file or directory)
Also, in fastboot, when I try and do "adb devices" it says "no device connected" even though it is connected
Click to expand...
Click to collapse
If you are in fastboot mode, "adb devices" will tell you nothing is connected, as adb does not work in fastboot mode...
Sent from my Galaxy Nexus using Tapatalk 2
Adb devices won't work in fastboot
you need to type fastboot devices
Can this thread just be about support instead of feeding the troll?
I'm gonna try doing what's in enfants signature and I'll get back to you in a minute, thanks guys!
zukа said:
Can this thread just be about support instead of feeding the troll?
I'm gonna try doing what's in enfants signature and I'll get back to you in a minute, thanks guys!
Click to expand...
Click to collapse
if you do what is in his signature, you will be good to go. just follow the directions. its a good guide.
zukа said:
Can this thread just be about support instead of feeding the troll?
I'm gonna try doing what's in enfants signature and I'll get back to you in a minute, thanks guys!
Click to expand...
Click to collapse
You're right, apologies.
Good luck!
Also try this. http://forum.xda-developers.com/showthread.php?t=1392310
[GNex TOOLKIT V7.0] Drivers, Backup, Unlock, Root, CWM, Flash, Mods + MUCH MORE [GSM]
Sent from my Galaxy Nexus using xda premium
Done! The tutorial worked. Thanks a million everyone who contributed!
Except the guy who said my friend's device was bricked. That wasn't cool.
Anyway, to anyone who finds this thread through google, follow the tutorial in efrant's signature and you're golden.
Thread cleaned. Please keep it respectful in here.
I've got stock ICS back up and running on the phone, and have made a Nandroid backup to make sure this doesn't happen again. Still can't get AOKP to boot though - I've got no idea what I'm doing wrong
MD5's verified?
And you're flashing for the correct device, yes?
Factory Reset>FlashAOKP (Build 38 now avaiable...as of a few hours ago on goo.im)>FlashGapps (4/29 is the latest)>start?
zukа said:
I've got stock ICS back up and running on the phone, and have made a Nandroid backup to make sure this doesn't happen again. Still can't get AOKP to boot though - I've got no idea what I'm doing wrong
Click to expand...
Click to collapse
After you flash aokp in CWM, are you wiping? In most cases, that is the problem people are having. Wipe data, cache and the Dalvik cache, and it should boot.
Sent from my Galaxy Nexus using Tapatalk 2
It wasn't either of those things actually - it was the kernel. I'd tried clearing data and cache with no luck, but when I flashed the GLaDOS kernel straight after AOKP it booted fine and is now running with no problems at all.
I've got no idea why, but it's all working fine. Thanks to all who helped me today, my friend now has a fully working GNEX with AOKP!

BRICK???..Stuck in CMW recovery mode and cannot mount sdcard...hlep plz

Hey guys,
I tried flashing the ICS rom (cm-9-20120420-ODIN-galaxy2.tar.tar) yesterday, My Samsung Galazxy S2 is already rooted, but when the phone rebooted after flashing the custom rom, it reboots to a black screen with a blue light lit. i can boot into CMW recovery, but when i try to restore from the NAndroid, it gives the error E:Can't mount sdcard. when i try to mount the sdcard, it gives the same error. When i put the phone into download mode to use ODIN to reflash it, ODIN doesn't even recognize the phone. if itry to format the card through CMW, it gievs Error mounting sdcard.....skipping format....Done.. If i try mount USB storage, it gives E: unable to write to ums lunfile (no such file or...) How do i fix this, is it bricked? i never ran into this problem when i use to flash my EVO 4G, TP2, TP, or WM 6.5 Mogul.
Make sure you have the proper drivers installed on your computer and try a different cable. I think Odin is your only hope unless you try an external SD card.
Sent from my SPH-D710 using xda app-developers app
Do you have Samsung kies installed ?
Sent from my SPH-D710 using Tapatalk 2
misterpostman said:
Make sure you have the proper drivers installed on your computer and try a different cable. I think Odin is your only hope unless you try an external SD card.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I download the Samsung drivers from the website and downloaded Kies. When i try to push the rom through ADB, ADB cmd does not show the phone under listed devicesor it does not show up in Device Manager.
Maybe a different computer? If that doesn't work then I think its safe to say your device is dunskies
Sent from my SPH-D710 using xda app-developers app
Is the international S2 CM9 ROM accidentally flashed on your E4GT, or do you have a GSM Galaxy S2?
U odined a rom for the international sgs2 on you're e4gt... U messed the partions up that's y u can't access it via usb or odin, sorry bro
Sent from my SPH-D710 using xda premium
shunmyles said:
Hey guys,
I tried flashing the ICS rom (cm-9-20120420-ODIN-galaxy2.tar.tar) yesterday, My Samsung Galazxy S2 is already rooted, but when the phone rebooted after flashing the custom rom, it reboots to a black screen with a blue light lit. i can boot into CMW recovery, but when i try to restore from the NAndroid, it gives the error E:Can't mount sdcard. when i try to mount the sdcard, it gives the same error. When i put the phone into download mode to use ODIN to reflash it, ODIN doesn't even recognize the phone. if itry to format the card through CMW, it gievs Error mounting sdcard.....skipping format....Done.. If i try mount USB storage, it gives E: unable to write to ums lunfile (no such file or...) How do i fix this, is it bricked? i never ran into this problem when i use to flash my EVO 4G, TP2, TP, or WM 6.5 Mogul.
Click to expand...
Click to collapse
try reformatting the card in a PC or different phone & see if it reads.. it could be a corrupt card, but if you can get to recovery it shouldn't be bricked
T.C.P said:
U odined a rom for the international sgs2 on you're e4gt... U messed the partions up that's y u can't access it via usb or odin, sorry bro
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
would it be possible to re-partition from recovery? & doesn't ODIN have a repartition option..?
Once again. Your do not own a Galaxy S2, you own a Galaxy S2 Epic 4G Touch. Unless the page you downloaded the file from has Epic 4G Touch written all over it, it probably has NOTHING to do with your phone.
You will not find any CM9 build for our phone on Cyanogen Mod's website and you will never flash a rom, tar or anything that is marked for the i9100 or any other variant other than the SPH-D710 to your device.
The bootloader in the International tar you ODIN'd will not work with your phones USB. You will never ODIN anything again in this state. Get it jtag'd or replaced. You can sit here and fart around with it but you flashed software that was not compatible with the your hardware and most of it will no longer work until it has been replaced.
darklavalizard said:
Is the international S2 CM9 ROM accidentally flashed on your E4GT, or do you have a GSM Galaxy S2?
Click to expand...
Click to collapse
Hey guys,
I tried flashing the ICS rom (cm-9-20120420-ODIN-galaxy2.tar.tar from website:
http://forum.xda-developers.com/showthread.php?t=1419102&highlight=ice+cream+rom+for+android
the CM 9 Resurrection Edition for ODIN
yes, i think i did flash the wrong one because now my phone say GT-I1900 instead of the SP******; so there is no way to revert huh?
what is jtag'd and will Sprint know i rooted my phone?
you flashed a tar file instead of a zip in recovery?
J_Whit85 said:
you flashed a tar file instead of a zip in recovery?
Click to expand...
Click to collapse
yes i did, im such a noob
shunmyles said:
yes i did, im such a noob
Click to expand...
Click to collapse
can you take the battery out and try to reboot into download mode. If you can then odin back to El29/26
J_Whit85 said:
can you take the battery out and try to reboot into download mode. If you can then odin back to El29/26
Click to expand...
Click to collapse
Won't work... his partitions are screwed
Sent from my awesomely EPIC Phone
Rooster85 said:
Won't work... his partitions are screwed
Sent from my awesomely EPIC Phone
Click to expand...
Click to collapse
Hmmm im at a lost then
if i take it back to Sprint to get a new phone, will there be able to tell i rooted it? or is there a way to fix the partitions?
shunmyles said:
if i take it back to Sprint to get a new phone, will there be able to tell i rooted it? or is there a way to fix the partitions?
Click to expand...
Click to collapse
Think ur screwed since it now say international model
Sent from my SPH-D710BST using Tapatalk 2
shunmyles said:
Hey guys,
I tried flashing the ICS rom (cm-9-20120420-ODIN-galaxy2.tar.tar from website:
http://forum.xda-developers.com/showthread.php?t=1419102&highlight=ice+cream+rom+for+android
the CM 9 Resurrection Edition for ODIN
Click to expand...
Click to collapse
That is a garunteed brick. Just like the ICS leaks from samsung the bootloader borks the usb and storage can not be mounted.
It is NOT for your phone. Flashing roms from that section is just plain suicidal. Its like playing russian roulette with a full cylinder. The SPH-D710 is not an i9100. Lets say had it even come close to working you would have NO voice and No Data. The i9100 is a GSM phone, not CDMA and it does not use WiMax. The hardware in your phone is WAY different.
Our phone is here - http://forum.xda-developers.com/showthread.php?t=1563658 and the nightlies are on goo.im

Return to Stock = Sponged it! help!

Something has gone horribly wrong... I was running rooted/stock using the Team Epic procedure for several months now without a problem. I attempted to return to stock tonight using the method posted here:
http://www.epiccm.org/2012/06/sprint-sgs3-stock-restore.html
Something has gone horribly wrong. I get the Samsung splash screens but then it goes to a pulsing blue to purple LED and that's it.
I can get it into download mode and bring up CWM to select the ROM, but that's it.
I'm in over my head here, big-time I thought I had it figured out, but apparently not.... Help!!
Thanks, gang!
if you can get into recovery mode this is the best i can think of to do, is go to this post http://forum.xda-developers.com/showthread.php?t=1904099 and download the one for your size phone then copy it onto a sd card, put it in your phone and enter recovery mode and flash it. youll be back to factory.
I've never hosed my phone, but if u can get into clockworkmod recovery, ur good. Did u make a nandroid after u rooted?
Sent from my SPH-L710 using xda app-developers app
montecarlo5 said:
if you can get into recovery mode this is the best i can think of to do, is go to this post http://forum.xda-developers.com/showthread.php?t=1904099 and download the one for your size phone then copy it onto a sd card, put it in your phone and enter recovery mode and flash it. youll be back to factory.
Click to expand...
Click to collapse
Thanks for that... Downloading now. We'll see how it goes here in about 25 more minutes (ugh!) Here's hoping it works so I can get some sleep tonight! Yikes!
g_money said:
I've never hosed my phone, but if u can get into clockworkmod recovery, ur good. Did u make a nandroid after u rooted?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I'm still a HUGE rookie... what's a nandroid? (and if I have to ask, I'm sure I didn't...) It wasn't in the instructions from the Team Epic guys...
I have been using Titanium Backup Pro for Root to do backups every few days to DropBox... I'm hoping that will prove to be useful here... If I can get it working again.... Download time is up to 32 minutes now... Nuts!
nandroid is a whole phone backup that you do in recovery.how your phone is, is what the back up will be. and yeah that download time is carzy but sometimes it will speed up.
tb is only app backups really, so after you get your phone running like a champ again, you run tb and re install your apps and their data.
hope it works out for you thou
montecarlo5 said:
nandroid is a whole phone backup that you do in recovery.how your phone is, is what the back up will be. and yeah that download time is carzy but sometimes it will speed up.
tb is only app backups really, so after you get your phone running like a champ again, you run tb and re install your apps and their data.
hope it works out for you thou
Click to expand...
Click to collapse
OK, so once this is finished downloading, what comes next? I'm still a little confused on the whole 'odexed/dedexed' thing... I'm assuming I need to load it onto the SD card (which I can do), plug that into the phone, and then select it from CWM? Or do I need to go back to the stock recovery first using Odin?
Post to let all know how u made out with the download. If u still need help, ur at the right place.
Sent from my SPH-L710 using xda app-developers app
Don't worry about odexed or deodexed right now, after you flash that, you will be back at stock as if you just walked out the store with your phone, factory, then you can start all over,,, that rom/file will make your phone stock.
Sent from my SPH-L710 using Tapatalk 4 Beta
g_money said:
Post to let all know how u made out with the download. If u still need help, ur at the right place.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
So far, no luck... It appears that the download aborted after I went to bed. The file was supposed to be 806Mb, but came in at 432Mb. If I try to load it onto the phone, it says, "Can't open /external...(long file name)....zip (bad). Installation aborted.
I also downloaded the MD4 file last night, and that appears to have been successful. It seems to be working properly for the moment. It's mounting the partition which is a good start.
gijoecam said:
So far, no luck... It appears that the download aborted after I went to bed. The file was supposed to be 806Mb, but came in at 432Mb. If I try to load it onto the phone, it says, "Can't open /external...(long file name)....zip (bad). Installation aborted.
I also downloaded the MD4 file last night, and that appears to have been successful. It seems to be working properly for the moment. It's mounting the partition which is a good start.
Click to expand...
Click to collapse
ETA: Looking good.... Got the Sprint splash screen, and now the 'Android is Upgrading, Optimizing app XX of XXX'....
Aaaand, we're live people!! Success! MD4 is up and running, and there doesn't seem to have been ANY loss of data.... It didn't exactly return it to stock either as all my data is all still there, but it does appear to have removed SuperUser, which would mean I'm no longer rooted, correct? It also appears to have gone back to the stock recovery. So to re-root, does the 'Team Epic Root from Recovery' method I used before still work? (i.e. use Odin to install custom recovery, then flash the Team Epic Root from Recovery .zip file)
THanks a million, gang! At least I have a working phone again, with apparently no loss of data at the moment. It'll be nice to have my Root back eventually, so Tasker can do its thing, but for now, it's more than a paperweight!
First - thanks for using "sponged" :good:
Second:
Please read forum rules before posting
Questions and help issues go in Q&A and Help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Glad to hear you're back up.
Yea, you'd just use odin to root...
kennyglass123 said:
First - thanks for using "sponged" :good:
Second:
Please read forum rules before posting
Questions and help issues go in Q&A and Help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
My apologies... I thought I had it in the right spot. I'll do better next time.
g_money said:
Glad to hear you're back up.
Yea, you'd just use odin to root...
Click to expand...
Click to collapse
If I understand correctly, I can still use the same Team Epic Root from Recovery file to install the CWM recovery regardless of which version (MB1 or MD4) I have on my phone, right? Or is there a different tar file I need to use to root the MD4 version?
Sorry for the dumb questions... Very new to this stuff still...
just use the same method you did the first time you rooted and youll be good to go.
soory for the late response but yea, I believe montecarlo's right. Sounds like u used skunk ape's guide for rooting? If so should b no problem. If u used a toolbox, it may/may not have the md4 update?
Sent from my SPH-L710 using xda app-developers app
Got it now. Rooted in just a few minutes... Easy-peasy! Just used Odin like I did the first time.
Correct me if I'm wrong, but I can just leave the 'return to stock' ROM on the SD card, and if I need to head to the Sprint store for some reason, I can just boot into recovery, select that one, and presto! returned to stock, right?
Thanks again for all the help with the rookie mistakes! You guys rock!!
gijoecam said:
Got it now. Rooted in just a few minutes... Easy-peasy! Just used Odin like I did the first time.
Correct me if I'm wrong, but I can just leave the 'return to stock' ROM on the SD card, and if I need to head to the Sprint store for some reason, I can just boot into recovery, select that one, and presto! returned to stock, right?
Thanks again for all the help with the rookie mistakes! You guys rock!!
Click to expand...
Click to collapse
yeppers! thats what its for.

[Q] Just wiped data and accidentally also wiped sd card, (help!)

So i'm an idiot. I wiped data/factory reset, wiped system, then also (accidentally!) wiped my sd card. I was planning on flashing jedi x 17 but now i have nothing to flash. It's been a while since I've done this but can i just flash via odin? if so, might someone help me out with a step by step? i really cant afford to brick this phone.
thanks
jason
Just take your microsd card out and plug it into your computer with a adapter and put the jedi files onto it. Pop it back into your phone. Boot into recovery and flash.
mc_becker56 said:
Just take your microsd card out and plug it into your computer with a adapter and put the jedi files onto it. Pop it back into your phone. Boot into recovery and flash.
Click to expand...
Click to collapse
and if i dont have an adapter yet i need to do this asap, like tonight? is there not a way via odin that i can accomplish this?
jason370 said:
and if i dont have an adapter yet i need to do this asap, like tonight? is there not a way via odin that i can accomplish this?
Click to expand...
Click to collapse
I'm sure you can use odin to flash jedi but just in case why don't you just do this http://forum.xda-developers.com/showthread.php?t=1975560 and then put Jedi onto your sd.
mc_becker56 said:
I'm sure you can use odin to flash jedi but just in case why don't you just do this http://forum.xda-developers.com/showthread.php?t=1975560 and then put Jedi onto your sd.
Click to expand...
Click to collapse
thanks, ill try that. do you know which version of odin i should use, i couldnt find an exact match with the sgn2, only the sgn 1
jason370 said:
thanks, ill try that. do you know which version of odin i should use, i couldnt find an exact match with the sgn2, only the sgn 1
Click to expand...
Click to collapse
I used the one provided..3.07
mc_becker56 said:
I'm sure you can use odin to flash jedi but just in case why don't you just do this http://forum.xda-developers.com/showthread.php?t=1975560 and then put Jedi onto your sd.
Click to expand...
Click to collapse
mc_becker56 said:
I used the one provided..3.07
Click to expand...
Click to collapse
so i used my old nokia e72 as a sd card reader, put jedix17.zip on the 8gb sd card on it, then put that card into my sgn2, when i flashed it would only read it from external sd and then it said it couldnt read the e drive...so it aborted.
i feel like i was pretty close to pulling this off...any suggestions?
jason370 said:
so i used my old nokia e72 as a sd card reader, put jedix17.zip on the 8gb sd card on it, then put that card into my sgn2, when i flashed it would only read it from external sd and then it said it couldnt read the e drive...so it aborted.
i feel like i was pretty close to pulling this off...any suggestions?
Click to expand...
Click to collapse
Hmm, maybe your Nokia formatted the sd card when you put it in and it needs to be reformatted for your Note 2 in order to work. Which in turn would mean you would have to delete Jedi and would be back to square 1.
mc_becker56 said:
Hmm, maybe your Nokia formatted the sd card when you put it in and it needs to be reformatted for your Note 2 in order to work. Which in turn would mean you would have to delete Jedi and would be back to square 1.
Click to expand...
Click to collapse
right , im pretty sure that's it. ok so im ready to go the odin route. is there a tar file available for jedi x17, or can i change the zip into a tar, or must i go the route of flashing a stock tar via odin and then put the jedi zip on my sd?
sorry, its been a while and its late and im screwed if i dont get this done.
im an idiot
jason370 said:
right , im pretty sure that's it. ok so im ready to go the odin route. is there a tar file available for jedi x17, or can i change the zip into a tar, or must i go the route of flashing a stock tar via odin and then put the jedi zip on my sd?
sorry, its been a while and its late and im screwed if i dont get this done.
im an idiot
Click to expand...
Click to collapse
I honestly don't know about that one. I'd hate to give you the green light then you mess up your phone. I'd either go the route I provided or hold out until someone else can answer that question for you.
mc_becker56 said:
I honestly don't know about that one. I'd hate to give you the green light then you mess up your phone. I'd either go the route I provided or hold out until someone else can answer that question for you.
Click to expand...
Click to collapse
simultaneously pursuing your route and holding out for more answers! (its a long download)
Flash the stock rooted let it boot. Then put Jedi on your sd card ,, not to recovery and flash Jedi. Btw there is no Jedi in tar form...
Sent from my SGH-T889 using Tapatalk 4
deeznutz1977 said:
Flash the stock rooted let it boot. Then put Jedi on your sd card ,, not to recovery and flash Jedi. Btw there is no Jedi in tar form...
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
Yep, that's what I did...back in business...thanks!
Sent from my SGH-T889 using Tapatalk 2
jason370 said:
Yep, that's what I did...back in business...thanks!
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
No people of you ever need help just pm me. Btw thank me. I don't get paid to help lol
Sent from my SGH-T889 using Tapatalk 4
I know I'm a little late, but you guys do know that you can mount your sd card in recovery right?
so just mount your sd in recovery and transfer the rom to the sd card and flash.
safeplayer22 said:
I know I'm a little late, but you guys do know that you can mount your sd card in recovery right?
so just mount your sd in recovery and transfer the rom to the sd card and flash.
Click to expand...
Click to collapse
How would I do that if I wiped both the phone and sd card?
Sent from my SGH-T889 using Tapatalk 2
Just download the rom onto your pc and transfer the rom to your phone while you are mounted.
you will note that in recovery mode, you can mount your sd (formatted or not) to your pc. This will allow you to transfer files from/to your pc
safeplayer22 said:
Just download the rom onto your pc and transfer the rom to your phone while you are mounted.
you will note that in recovery mode, you can mount your sd (formatted or not) to your pc. This will allow you to transfer files from/to your pc
Click to expand...
Click to collapse
I see...good one. I already flashed via Odin but that's great info for future reference.
Thanks,
Jason
Sent from my SGH-T889 using Tapatalk 2

Stuck on the htc One Screen

I am running the NuSenseOne R5 rom. I was in in recovery to wipe the cache after flashing a. zip file and hit the wrong button and wiped the phone. After I rebooted it hung on the htc one screen,won't go any further. Can still get into bootloader and recovery etc. but not past the htc one screen. Tried to flash the rom thru sideload zip flash but can not get the pc to reconize the phone (must have wiped the system). I know it's not bricked but can't get to a system to use the phone. Any way to solve this mess??
Sent from my Galaxy Tab 10.1
jbh00jh said:
I am running the NuSenseOne R5 rom. I was in in recovery to wipe the cash after flashing a. zip file and hit the wrong button and wiped the phone. After I rebooted it hung on the htc one screen,won't go any further. Can still get into bootloader and recovery etc. but not past the htc one screen. Tried to flash the rom thru sideload zip flash but can not get the pc to reconize the phone (must have wiped the system). I know it's not bricked but can't get to a system to use the phone. Any way to solve this mess??
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
What happens if you factory reset?
Have tried that several times, reboots when finished and boots down to htc one screen and stops.
Sent from my Galaxy Tab 10.1
Have run restore in recovery and it says restored but when you reboot it stops when it gets to the htc one screen.
Sent from my Galaxy Tab 10.1
Another thing I noticed after the factory reset was that the boot images were the ones from the rom, not the stock ones. Now it is stuck on the white htc screen with the red writing.
Sent from my Galaxy Tab 10.1
It has to do with non stock kernels. With my kernel for aosp occasionally it'll sit at the splash screen for up to 5 min. Sometimes flashing something to system helps. When it does this to me I reflash my kernel and it boots right up even though there are zero changes
Sent from my One using Tapatalk
Do you have another Rom you can install? Or a backup you can restore from? Reason why it's stuck on white HTC screen is there is no operating system loaded in it. Go in to recovery do a full wipe and install a Rom.
Sent from my HTC6500LVW using Tapatalk
Nothing on sd card to flash.
Sent from my Galaxy Tab 10.1
How to load the rom to flash,the pc does not reconize the phone.
Sent from my Galaxy Tab 10.1
Try to push a file to your phone while in hboot using adb. Power and volume down to get there.
Sent from my Oney Bone.
brymaster5000 said:
Try to push a file to your phone while in hboot using adb. Power and volume down to get there.
Sent from my Oney Bone.
Click to expand...
Click to collapse
I was trying to do that but will have do it in the morning because pc ran out of power and is charging now.
Sent from my Galaxy Tab 10.1
jbh00jh said:
I was trying to do that but will have do it in the morning because pc ran out of power and is charging now. By the way thanks for the help.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
Sent from my Galaxy Tab 10.1
Tried all day (about to pull my hair out) but could not get the rom in the bootloader using adb..Everytime I selected install zip from sideload it said files not found. Have seen Micro SD adapters in some other threads that are supposed to work on the One. Some of the dudes in the thread said they keep their roms on the sd card and flash them with the adaptor. Anyone think that would work. Sounds like the old days.
Any ideas on what I should do next?
jbh00jh said:
Tried all day (about to pull my hair out) but could not get the rom in the bootloader using adb..Everytime I selected install zip from sideload it said files not found. Have seen Micro SD adapters in some other threads that are supposed to work on the One. Some of the dudes in the thread said they keep their roms on the sd card and flash them with the adaptor. Anyone think that would work. Sounds like the old days.
Any ideas on what I should do next?
Click to expand...
Click to collapse
USB to go works I know I've done it.
I ordered the Meenova SD adapter last night because it said it was compatible with the HTC One. Is that what you used?
How did the process work?
Sent from my Galaxy Tab 10.1
jbh00jh said:
Tried all day (about to pull my hair out) but could not get the rom in the bootloader using adb..Everytime I selected install zip from sideload it said files not found. Have seen Micro SD adapters in some other threads that are supposed to work on the One. Some of the dudes in the thread said they keep their roms on the sd card and flash them with the adaptor. Anyone think that would work. Sounds like the old days.
Any ideas on what I should do next?
Click to expand...
Click to collapse
You could always flash the stock RUU and copy the rom that way.
Do you flash the ruu with adb? I am having trouble getting the data to the bootloader.
Sent from my Galaxy Tab 10.1
jbh00jh said:
Do you flash the ruu with adb? I am having trouble getting the data to the bootloader.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
Download the RUU from here. http://forum.xda-developers.com/showthread.php?t=2437436
Reboot to the bootloader, go to fastboot
do fastboot oem rebootRUU
After it reboots to RUU, do fastboot flash zip nameofzip
Let the process finish and you should be back on stock.
Once you fix it never wipe the internal storage. I learned the hard way with the nexus 7 lol
Sent from my HTC6500LVW using Tapatalk
Yeah,it was an accident,hit the wrong button while talking to a friend. I guess it was a problem with the kernal that caused it not to be able to reboot and started all this. Thanks for the help and will work on the phone this afternoon. Guess the Meenova OTG usb will be here Monday or Tuesday.
Sent from my Galaxy Tab 10.1

Categories

Resources