Some Spreadtrum android phones are not very carefully tested ... They don't even check if the microphone is loud enough ...
And the fun fact is that it's very easy to fix !
WARNING: May only work with Windows XP 32Bits.
You just have to download the Spreadtrum drivers here: http://www.mediafire.com/download.php?2tyg0k2xp3ejgyg and there: http://www.mediafire.com/download.php?c5nf3rlhxmxhu4x
Then download the Spreadtrum debug tool: http://www.mediafire.com/download.php?rngukh111vqfr8h
Now plug your phone (turned on), and install the drivers.
Open Channelserver from the tools.
Then open Audiotester
Click on "Connect" from channelserver (the connect on the top)
Click on "Get Audio mode information"
Go to the handset tab
Click on "Volume config"
Now you can change "ul PGA" from usually 10.5 to 12 or more. Change it on all the lines.
Now you have 4 little buttons on the top-left corner of the window.
The first one is write to ram (to test if it work before changing the settings permanently)
The second is read from ram (to load the actual settings)
The third is write to flash (to permanently change the settings, so the phone can keep the settings after a reboot)
The fourth is read from flash (to load the permanent settings)
You can even change the settings while you are in the middle of a call !
So it makes it easy to test.
Just call somebody with a lot of time and patience, then change some settings, load them to ram, and shortly after this person will ear if it is successful or not.
If everything seems fine, click on write to flash, so theses settings will be made permanents.
You can now unplug the phone from your computer ^^
Great thanx!
Thank you very much, because I think maybe it is the problem what I had. Nobody was even able to help, but the information and the drivers you provide maybe I will be able to solve the problem. THANK YOU, THANK YOU AND THANK YOU!
Yet I just tried with the drivers, I have Win7 - and i was able to install the first SCI-android-usb-driver-jungo-v4 driver. Now, when I connect the phone via USB, my computer finds it as Spreadtrum phone. I started with turn on usb debugging on my phone, and it worked. I started with the channelserver, and i found a problem. Channelserver had a lot of options (UART/Winsocket), Port, Baud rate, endian, winsocket. I tried to leave the options as default, and i checked the client info, but i cannot see my phone as a client. I tried to find, what's the problem, and I realize, that i have only one option to choose as a port: COM1. But my phone was connected via USB, so there must be a problem. And because of this problem i cannot use audiotester. Now I try to figure out, what is the comm problem.
T
ElectronikHeart said:
Some Spreadtrum android phones are not very carefully tested ... They don't even check if the microphone is loud enough ...
And the fun fact is that it's very easy to fix !
Now plug your phone (turned on), and install the drivers.
Open Channelserver from the tools.
Then open Audiotester
Click on "Connect" from channelserver (the connect on the top)
Click on "Get Audio mode information"
Go to the handset tab
Click on "Volume config"
Now you can change "ul PGA" from usually 10.5 to 12 or more. Change it on all the lines.
Now you have 4 little buttons on the top-left corner of the window.
The first one is write to ram (to test if it work before changing the settings permanently)
The second is read from ram (to load the actual settings)
The third is write to flash (to permanently change the settings, so the phone can keep the settings after a reboot)
The fourth is read from flash (to load the permanent settings)
You can even change the settings while you are in the middle of a call !
So it makes it easy to test.
Just call somebody with a lot of time and patience, then change some settings, load them to ram, and shortly after this person will ear if it is successful or not.
If everything seems fine, click on write to flash, so theses settings will be made permanents.
You can now unplug the phone from your computer ^^
Click to expand...
Click to collapse
---------- Post added 5th March 2013 at 12:26 AM ---------- Previous post was 4th March 2013 at 11:52 PM ----------
O.K. I tried to figure out:
My settings with channelserver:
Type: Winsocket
Port: 36667
Adress: 127.0.0.1
Endian: little endian
Winsocket server port: 36666
Then i see in the client info:
client counts:1
IP: 127.0.0.1
Host: T-PC
I tried audiotester, I choose te top connect options than the get audio mode information. I get this message:
Get eq mode count from phone
Execute command time out! (CMD: AT+ SPEQPARA=0)
Read Untunable EQ (8800 G) mode count name from phone
Execute command time out! (CMD: AT+ SPHENA =0,0)
Read audio_dsp mode count from phone
Execute command time out! (CMD: AT+ SADM =0)
Unfortunately, I don'tknow what does it mean...
Round 3 - Fight
After changing the Win7 Os to an another computer, which had XP, i was able to use the channelserver and audiotester. I installed the drivers, and i was able to choose between SCI-DIAG (COM4) or SCI-VENDOR (COM5). With choosing the SCI-DIAG option I was able to run until the get audio information, and the computer has done the task, without any fault message. I try to find the handset tab, but I don't know, where can I find it. In the audioserver, thera are just only one settings, and I can choose from this options:
get audio mode information
get music mode information
make call
hang up,
export
import
control bye (I cannot choose it, bacause it is gray, and I cannot choose it.)
Where is the handset option?
gtxphoenix said:
Thank you very much, because I think maybe it is the problem what I had. Nobody was even able to help, but the information and the drivers you provide maybe I will be able to solve the problem. THANK YOU, THANK YOU AND THANK YOU!
Yet I just tried with the drivers, I have Win7 - and i was able to install the first SCI-android-usb-driver-jungo-v4 driver. Now, when I connect the phone via USB, my computer finds it as Spreadtrum phone. I started with turn on usb debugging on my phone, and it worked. I started with the channelserver, and i found a problem. Channelserver had a lot of options (UART/Winsocket), Port, Baud rate, endian, winsocket. I tried to leave the options as default, and i checked the client info, but i cannot see my phone as a client. I tried to find, what's the problem, and I realize, that i have only one option to choose as a port: COM1. But my phone was connected via USB, so there must be a problem. And because of this problem i cannot use audiotester. Now I try to figure out, what is the comm problem.
T
---------- Post added 5th March 2013 at 12:26 AM ---------- Previous post was 4th March 2013 at 11:52 PM ----------
O.K. I tried to figure out:
My settings with channelserver:
Type: Winsocket
Port: 36667
Adress: 127.0.0.1
Endian: little endian
Winsocket server port: 36666
Then i see in the client info:
client counts:1
IP: 127.0.0.1
Host: T-PC
I tried audiotester, I choose te top connect options than the get audio mode information. I get this message:
Get eq mode count from phone
Execute command time out! (CMD: AT+ SPEQPARA=0)
Read Untunable EQ (8800 G) mode count name from phone
Execute command time out! (CMD: AT+ SPHENA =0,0)
Read audio_dsp mode count from phone
Execute command time out! (CMD: AT+ SADM =0)
Unfortunately, I don'tknow what does it mean...
Click to expand...
Click to collapse
gtxphoenix said:
After changing the Win7 Os to an another computer, which had XP, i was able to use the channelserver and audiotester. I installed the drivers, and i was able to choose between SCI-DIAG (COM4) or SCI-VENDOR (COM5). With choosing the SCI-DIAG option I was able to run until the get audio information, and the computer has done the task, without any fault message. I try to find the handset tab, but I don't know, where can I find it. In the audioserver, thera are just only one settings, and I can choose from this options:
get audio mode information
get music mode information
make call
hang up,
export
import
control bye (I cannot choose it, bacause it is gray, and I cannot choose it.)
Where is the handset option?
Click to expand...
Click to collapse
It should be at the top, and I don`t use "Channelserver"
Same problem
Hi ElectronikHeart,
I'm having the same problem and I've been looking for a while for some solution so I was very happy when I saw your post.
I've followed your steps (on Win 7) but I'm stuck on step 4 (Get audio mode information).
When I press the button I get a lot of messages saying: Can not get endian mode from the phone.
Obviously I'm doing something wrong, but I'm totally lost.
Any suggestions are welcomen
Thanks
kurty154 said:
Hi ElectronikHeart,
I'm having the same problem and I've been looking for a while for some solution so I was very happy when I saw your post.
I've followed your steps (on Win 7) but I'm stuck on step 4 (Get audio mode information).
When I press the button I get a lot of messages saying: Can not get endian mode from the phone.
Obviously I'm doing something wrong, but I'm totally lost.
Any suggestions are welcomen
Thanks
Click to expand...
Click to collapse
I really do think that Spreadtrum AudioTester only work properly on Windows XP and 2K.
Thanks!
ElectronikHeart said:
I really do think that Spreadtrum AudioTester only work properly on Windows XP and 2K.
Click to expand...
Click to collapse
Thanks. It worked in XP!
I installed the drivers and the AudioTester worked just fine.
If it could be useful for others, just starting the AudioTester and connecting directly to UART worked fine for me.
Increased the volume and now the mic is fine
Audiotester - Debug tool
Hello. I installed debug toll under Win 7 and admin rights with XP SP3 compatibility, but the problem is, when I open Audiotester, there is no other possibility than "settings".
Thanks in advance for your help.
ElectronikHeart said:
Some Spreadtrum android phones are not very carefully tested ... They don't even check if the microphone is loud enough ...
And the fun fact is that it's very easy to fix !
WARNING: May only work with Windows XP 32Bits.
You just have to download the Spreadtrum drivers here: http://www.mediafire.com/download.php?2tyg0k2xp3ejgyg and there: http://www.mediafire.com/download.php?c5nf3rlhxmxhu4x
Then download the Spreadtrum debug tool: http://www.mediafire.com/download.php?rngukh111vqfr8h
Now plug your phone (turned on), and install the drivers.
Open Channelserver from the tools.
Then open Audiotester
Click on "Connect" from channelserver (the connect on the top)
Click on "Get Audio mode information"
Go to the handset tab
Click on "Volume config"
Now you can change "ul PGA" from usually 10.5 to 12 or more. Change it on all the lines.
Now you have 4 little buttons on the top-left corner of the window.
The first one is write to ram (to test if it work before changing the settings permanently)
The second is read from ram (to load the actual settings)
The third is write to flash (to permanently change the settings, so the phone can keep the settings after a reboot)
The fourth is read from flash (to load the permanent settings)
You can even change the settings while you are in the middle of a call !
So it makes it easy to test.
Just call somebody with a lot of time and patience, then change some settings, load them to ram, and shortly after this person will ear if it is successful or not.
If everything seems fine, click on write to flash, so theses settings will be made permanents.
You can now unplug the phone from your computer ^^
Click to expand...
Click to collapse
motorpoint said:
Hello. I installed debug toll under Win 7 and admin rights with XP SP3 compatibility, but the problem is, when I open Audiotester, there is no other possibility than "settings".
Thanks in advance for your help.
Click to expand...
Click to collapse
The original instructions contained an error (or were unclear)
I did this on a windows xp machine. I'm guessing it would work on a windows 7 machine.
Open Channelserver from the tools.
Then open Audiotester
Select SCI-DIAG option in the UART section
Click on "Connect" from UART section
If setup correctly, you'll get a number of status updates on the bottom.
A number of new tabs show up
Click on "Get Audio mode information"
Go to the handset tab
Click on "Volume config"
Now you can change "ul PGA" from usually 10.5 to 12 or more. Change it on all the lines.
(follow rest of writeup in original post)
thank you very much! will try it this weekend.
Many thanks to ElectronikHeart and Nimbus22!!!
Level was 7.5 only, not 10.5 as usually. I made change to 12 and now it is fine.
Thanks
Thanks a lot ElectronikHeart!
It worked on Win7 32bit and i changed it to 12 instead of 10.5.
I was looking at Audiotester and was wondering if it was possible to change other things
with it such as speaker volume and the calling speaker volume?
Ravage32 said:
Thanks a lot ElectronikHeart!
It worked on Win7 32bit and i changed it to 12 instead of 10.5.
I was looking at Audiotester and was wondering if it was possible to change other things
with it such as speaker volume and the calling speaker volume?
Click to expand...
Click to collapse
Yes you can also change the speaker volume, it's on the same place just some other settings.
Try it in ram before flashing the new settings in rom. and use the try and guess method ^^
ElectronikHeart said:
Yes you can also change the speaker volume, it's on the same place just some other settings.
Try it in ram before flashing the new settings in rom. and use the try and guess method ^^
Click to expand...
Click to collapse
That's cool! what about the speaker that is used for calling.
the one at the top front of the phone? Thats real quite on my phone.
Ravage32 said:
That's cool! what about the speaker that is used for calling.
the one at the top front of the phone? Thats real quite on my phone.
Click to expand...
Click to collapse
Yes I was talking about this one, It's exactly in the same place as the microphone but another setting. You may not be able to rise it a lot, but I already done this on one phone I had (Feiteng HT-G2), and it made a pretty good difference even if it was a little quiet for my taste even after this.
ElectronikHeart said:
Yes I was talking about this one, It's exactly in the same place as the microphone but another setting. You may not be able to rise it a lot, but I already done this on one phone I had (Feiteng HT-G2), and it made a pretty good difference even if it was a little quiet for my taste even after this.
Click to expand...
Click to collapse
Cheers mate, I'll give it a go!
It does not help
Hi,
thanks for this manual, but I've problem - I successfully connect to phone and retrieve data (via AudioTester), I changed in volume config "ul PGA" attribute from 7.5 to 12, I wrote to flash successfully, but problem is the same. Microphone is too silent...
Is there any other solution, or can I change some other attributes in "handset" tab to resolve it?
Please, help mi.. I have two phones with the same fault.
Photo in attachement.
I had factory value of 7.5, I changed to 18 and now it works nice with my wife's voice.
I can configure to not hear that noise?
ElectronikHeart said:
Some Spreadtrum android phones are not very carefully tested ... They don't even check if the microphone is loud enough ...
And the fun fact is that it's very easy to fix !
Open Channelserver from the tools.
Then open Audiotester
Click on "Connect" from channelserver (the connect on the top)
Click on "Get Audio mode information"
Go to the handset tab
Click on "Volume config"
Now you can change "ul PGA" from usually 10.5 to 12 or more. Change it on all the lines.
Now you have 4 little buttons on the top-left corner of the window.
The first one is write to ram (to test if it work before changing the settings permanently)
The second is read from ram (to load the actual settings)
The third is write to flash (to permanently change the settings, so the phone can keep the settings after a reboot)
The fourth is read from flash (to load the permanent settings)
You can even change the settings while you are in the middle of a call !
So it makes it easy to test.
Just call somebody with a lot of time and patience, then change some settings, load them to ram, and shortly after this person will ear if it is successful or not.
If everything seems fine, click on write to flash, so theses settings will be made permanents.
You can now unplug the phone from your computer ^^
Click to expand...
Click to collapse
hello,
I have uploaded the values of 7.5 to 12 and I hear much better, but still hear background noise
How I can configure to not hear that noise?
thank you very much
Same problem with background/interference noise
Woxter101 said:
hello,
I have uploaded the values of 7.5 to 12 and I hear much better, but still hear background noise
How I can configure to not hear that noise?
thank you very much
Click to expand...
Click to collapse
I did same thing with values, they were 7.5 and I tried 10.5 - 12 - 18. In every case, the only thing I could hear loudly, was that noise. It is the same noise that GSM lines do when close to non shielded speakers. Is there anyone who knows if it can be fixed? I hope so, as Audiotester has soooo many configuration options.
Thanks in advance!
Regards.
Related
Ok I searched on the forums hard for this one so forgive me if this has already been answered. I see to find people with Windows Mobile 6 and Windows XP or people with Windows Vista but Windows Mobile 5.
Since I'm running Vista, I use Windows Mobile Device Center instead of ActiveSync. The functionality of the program is fine, so I have no complaints. However, to upgrade ROMs or anything...I use an XP Machine as it seems Vista seems to think the device disconnects upon the loading of the bootloader. I've read somewhere in the forums that there is a driver update to fix that, but after applying...WMDC doesn't work properly...so I'd save the trouble and use a machine that has XP running instead until a better fix comes along.
My 8525 came stock with a program called Wireless Modem as of ROM 1.34.502.1 shipped, which seems to have been replaced by Internet Sharing.
The Wireless Modem application worked fine after setting up the modem with the Vista driver also found in the forums. I also tested the bluetooth connection and set that up to tether as well and it worked fine.
I finally decided to upgrade after days of reading and I tried to use the Wireless Modem feature. I noticed it wasn't there and tried to use Internet Sharing. The layouts are similar...but when I hook up the phone under USB, my computer doesn't even recognize it as a new device (modem) as I did uninstall the last driver.
When connected via Bluetooth, it recognized the device and installed the driver as Windows Mobile-based device support by default. Under services, only Active Sync is only available...as opposed to before when I had Dial-Up networking available. When I set up a PAN, the computer and device are connected together, however I do get the same problem as some others with a connection that is limited or local only. So the tethering is unsuccessful.
I recently upgraded my Cingular 8525 to WM6BE v1.2 (Cingular Edition)...which I can't seem to find in the threads anymore. I'm also running Radio 1.38.00.11...but I don't think that would affect anthing. I reverted back to my shipped ROM to check for alternate settings that might have helped...then I was going to revert back to WM6BE v1.2 Cingular...then I realized I accidently deleted that custom ROM and I couldn't find it anymore. I was stuck putting on the WM6BE v1.2 on the sticky thread after which forced me to reinstall the data settings/keyboard fix from the cab files. Haven't had problems with them but I did like that customized ROM for Cingular a little better considering I really like "clean" ROMs.
Anyway, I'm attempted to connect via MEdia Net AND Cingular GPRS settings provided by the Cingular Data Settings cab floating around the forums. It works fine it seems...it just seems like the problem is getting Vista to recognize the device as a modem, or at least having modem capabilities.
I guess thats as detailed as I can get right now. Hopefully someone can help now ^_^
You are right. I tried updating rom on Vista's Windows mobile Device and end up damaging my xda2i. The device displays "USB" when connected to cradle and "Serial v1. 01" when not. Do you have a solution apart from upgrading?
Solution on Vista
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Have I understand right? With this tweak We will be able to applied ROM upgrades to our HERMES from windows VISTA?
Confirmed.
I did already update my ROM in this way.
Cheers,
soniX
EDIT:
Please use HardSPL or something equal to be sure the risk is at a minimum.
And I can not be held responsible for any damage to your Hermes or your Brain
But as I said, for me it worked perfectly, remember to Restore the new Drivers or the Mobile Device Center will not work.
Hmm I don't think you people understand what I was asking...
I already know about that method to update with Vista...I actually tried it yesterday and for some reason it didn't work so I just use an XP Machine for now...but I was just asking merely about TETHERING.
I already have the ROMs of my choice loaded on my device.
In simpler words: How do I go about tethering (Running Internet Sharing) when my computer does not recognize the device as a modem...through USB or Bluetooth.
I'm running WM6BE v1.2 and Windows Vista Ultimate.
Maybe its Wm6BE, but I have used all the other roms (xda live, des, lsvw) and all I do is plug in the usb, start internet sharing and it connects no problem. Have to start internet sharing before wmdc starts. Internet Sharing works great, better than wireless modem. I was not able to use the WM6be due to problems with sbp pocket plus. I am currently using XDA live .30 and Vista Ultimate.
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
I enjoy the community so I think I'll do my best to contribute to it. When I get the chance, I'll try to make a guide with screenshots on using Windows Vista and loading WM6.
I'm going to try to switch to LVSW build with his new update today and I'll see how that works out.
I REALLY like the one custom build someone made (I forgot who) with the Cingular connection settings defaulted from the Cingular Shipped ROMs...I wish I can find those files again.
It seems like the people developing the new Cingular data connection cab files are really working hard at getting the default settings as if they just bought their phoes straight from Cingular.
I'll let you know how LVSW goes with Internet Sharing and Windows Vista
sonixwarrior said:
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Click to expand...
Click to collapse
Also, I've seen this guide posted twice...yours missing one step where I was supposed to "End WMDC.exe Process in Task Manager"
I still can't get Vista to run RUU...do you run the RUU with your device in Bootloader? I think I even tried that once and and still couldn't get it to work with the older Driver.
Not exactly sure what I'm missing or doing wrong...but its definitely after I install the driver. It acts as if I didn't install it at all, even if I check in drive details and its all correct in there.
i tried the method above for upgrading in vista and it didnt work for me...
what am i missing?
Where is it stopping?
Because I did it once, it has to work.
Where is it stopping? - At the bootloader (LSD-Screen with psychedelic colors ?) - or before ?
I will do an upgrade in the afternoon again and this time i will record ALL of my steps.
Hopefully I'll find the recept for the cake.
Cheers,
soniX
Yea it gets to the bootloader screen and I'm stuck as if I never loaded the AS4.5 drivers.
Sorry, too less time today for a screenshot-decorated guide.
I just upgraded my device again (only to proove it does work).
So here is again a guide, which differs to the first one.
I guess there are two ways to do this...
Prequesites:
- Search my previous post and download the USBAS.zip-File
- Extract it into a directory...
- You'll need your device and it has to be connected, too
The first approach:
Change the Serial-Driver
- On the device click Start > Settings, choose "Connections" there and click on "USB to PC"
- uncheck the item for "Enhanced..." there
- Click on OK.
- Now goto your Device Manager.
- Search an Item named "HTC USB Sync".
- Right-click it and choose "Update Driver".
- Choose the second option, then select to choose manually
- Select the directory where the zip has been extracted to and choose any inf file.
Start the Update-Tool
- After the driver-update you need to set the device back to RNDIS-Mode (follow Step 1 and recheck the option)
- Verify that you're running the correct drivers for the RNDIS-Device, the date in the device-manager has to be around January, 17th 2007.
- Start the ROM-Upgrade.
- It should work now.
For me it did not really work to switch from RNDIS to USB-Serial drivers in my localized (thanks bepe for the great work!) german WM6.
So if you have a problem with the first method use this one.
- Start your Device-Manager, we have to be very fast.
- Start the ROM-Upgrade as you've probably done before
- If the bootloader starts up, you'll notice a device/dettached,device/attached sound, this is your sign, goto to you Device-Manager.
- Search for the Entry "HTC USB Sync".
- Update drivers like it's written above.
- If it won't work and the upgrade tool dies with "cannot connect", don't worry. Reset your device (soft) and try again, this time you should not need to update the drivers.
Cheers,
soniX
I'm using XP and a USB cable. USed to work OK before upgrading to WM6 Black but now I get Error 797 on the PC saying modem not found or busy!
mrvanx said:
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
Click to expand...
Click to collapse
Take a look here
Code:
http://www.modaco.com/index.php?showtopic=252977
For Vista guide with screen shots, so far i've only flashed HardSPLv4 from inside Vista, but it worked i'm still plucking up enough courage to do a full flash of WM6
Nic
I do this (for Hard-SPL, don't know for other):
I have made what it was written on modaco (http://www.modaco.com/index.php?showtopic=252977), but
1) I was not in bootloader.
2) While active sync try to connect (but it does not succeed because they are not its driver) I've stopped WMDC.EXE and now hermes is connected.
3) NOW I do a flash.
If there is something that is not clear you say it to me.
My method also works (for me)
Can somebody confirm that my method works for vista?
soniX
I'm based also to your method, but it would be more complete to integrate it with the method on modaco.
It seems that most people didn't get the point of this thread...weird considering I put TETHERING in the subject line. However, it is nice to see people trying to help others with Vista to flash. I have the same problem myself but access to machines with XP nullify my real need for flashing on Vista for now.
I'm about to reinstall LVSW's latest ROM set for the billionth time and I'll try out tethering on that. It seems that people who were on WM6BE were having a hard time with Internet Sharing. I'll load a new rom and let you know how it goes.
Hello Everyone,
There is a very excellent forum topic for Linux on the Universal (http://forum.xda-developers.com/showthread.php?t=251584). I was wondering if we could start a similar one for the Blue Angel. I recently installed Opie II (Qtopia) on my Blue Angel from http://www.linuxtogo.org/~htcpxa/ and it looks good, I was just wondering what the status was.
Thank you,
Tim
Hmmm, this looks interesting.
So from my reading of the Universal thread and the scant txt files I have found do I take it you copy the Haret and image files to the root of your sd card and then run haret?
Looks easy... too easy!
Steve
I have tried to start linux with different linux images on my blue angel but without success.
Maybe linux couldn't run with windows mobile 6 pro on blueangel ?
harat cans start but X-Windows (and Opie ...) freezes. Does anyone have the same experiences ?
Which files do I need to copy to the SD card? There is a .rar.gz file, do I need to extract that file in my computer? Thanks.
i haved used some images from here:
http://www.angstrom-distribution.org/unstable/autobuild/htcblueangel/
zImage-2.6.21-hh20-r6-htcblueangel.bin
and it works.
But there is no wifi driver loaded.
My question is how can i insert/load wifi driver to this image ?
http://www.algepop.net/users/alge/angstrom-ba/images/htcblueangel/
it works.
But linux seems slower as windows mobile.
knopper said:
But linux seems slower as windows mobile.
Click to expand...
Click to collapse
linux is only the kernel. GPE seems to be slower than wince.
Try qtopia, it writes directly to the framebuffer, so it is the
fastest linux phone GUI.
Linux PC needed
Any way to install Linux on the BA without a Linux PC? I'd like to try Linux but I only have a Windows Vista PC
Problem with Qtopia not Recognizing SIM
Hello Everyone,
I loaded Qtopia on my BA and it works pretty good, but it doesn't recognize the SIM card and it says "No Modem Connection" and "No VoIP Connection." Any idea how to fix this?
Thanks,
Tim
kowloon_chan said:
Which files do I need to copy to the SD card? There is a .rar.gz file, do I need to extract that file in my computer? Thanks.
Click to expand...
Click to collapse
Follow the instructions here:
http://www.handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux
But get the files from here:
http://www.linuxtogo.org/~htcpxa/
i will try Qtopia ...
tim273 said:
Hello Everyone,
I loaded Qtopia on my BA and it works pretty good, but it doesn't recognize the SIM card and it says "No Modem Connection" and "No VoIP Connection." Any idea how to fix this?
Thanks,
Tim
Click to expand...
Click to collapse
The same happens to me, but phone works OK for this build whith GPE "http://www.algepop.net/users/alge/an.../htcblueangel/"
Log as root and start "Phone" app (is gomunicator).
I tried Qtopia (http://www.linuxtogo.org/~htcpxa/) and GPE. GPE seems more intuitive for me.
Hi, there!
I already tried everthing to get my phone workin but still get no success
I think there is a problem with my audio cause it mostly even plays no sound
i already tried booting with haret while playing a sound or maybe its a wm6 problem?
maybe anyone knows?!
greets
newest gpe based soft doesn't allow calling. Starting gomunicator it says 'cannot open connection to phone module in /dev/ttyS0: permission denied'.
I've been trying and searching for the correct /dev/ttySx, but none of them seem to work.
Anyone using a working gpe setup, where gomunicator works?
Can you let me know where to set what config option?
Thanks!
bkortleven said:
newest gpe based soft doesn't allow calling. Starting gomunicator it says 'cannot open connection to phone module in /dev/ttyS0: permission denied'.
I've been trying and searching for the correct /dev/ttySx, but none of them seem to work.
Anyone using a working gpe setup, where gomunicator works?
Can you let me know where to set what config option?
Thanks!
Click to expand...
Click to collapse
/dev/ttyS0 is correct for the GSM
You need to apply some patches and changes that you can see at http://www.handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux , section "Some setup hints"
See below ...
The phone speaker will be silent during calls until you set the mixer settings of "Output Mux" to "Mixer", either via alsamixer or by using a proper /etc/asound.state file (eg. http://www.algepop.net/users/alge/angstrom-ba/asound.state).
Even with a correct /etc/asound.state file you have to restore that state before running the phone application (tested with gomunicator):
/etc/init.d/alsa-state start
It seems that after a suspend/resume cycle the mixer value needs to be set again.
If you dont run gpe as root (by creating a user on the first startup), you have no access to the serial device /dev/ttyS0. fix this by adding group "dialout" to addgroups line of /etc/gpe/gpe-login.conf so that it contains:
addgroups audio,video,dialout
Please, let us to know if it works for you.
I'm considering to prepare an installation with the Albrecht's patches ( http://www.algepop.net/users/alge/angstrom-ba/images/htcblueangel/ ) and put it on some server. It's the BA Linux that worked better for me.
Searching posts, it seems that cr2 and goxboxlive has more experience on this port.
Hi,
I just upload a new version with phone support + some tools. Phone support is still in developpement ( phone call/receive works, but only sms receive works ) GPRS is working too. Just change your current GPRS profile password and DNS.
I'll try to upload later an image like it is done on HTC Unviersal with an autoinstall.
http://linuxtogo.org/~htcpxa/htcblueangel/Qtopia.
Notice that actually this works fine on Blueangel Board ID 5.
To remember what is your board id please look here http://wiki.xda-developers.com/index.php?pagename=BlueangelBoardIDs or just start linux image and look at cat /proc/cpuinfo.
And to finish Qtopia is faster than Windows Mobile
Good luck
Fabrice
Hi Fabrice.
I tested your build. It's really great and fast, thanks!
I have some questions: when I make/receive calls I can ear the other part but I need to cry to the microphone if I want that the other part ears me. You noticed something similar?
Also I don't know how to suspend/resume with this version. With algepop's GPE it worked (sometimes) for me.
My board id is 0x5
Greets.
Ángel
aperles said:
I have some questions: when I make/receive calls I can ear the other part but I need to cry to the microphone if I want that the other part ears me.
Click to expand...
Click to collapse
I think qtopia is not sending some AT command to the phone which adjusts the mic gain.
aperles said:
Hi Fabrice.
I tested your build. It's really great and fast, thanks!
I have some questions: when I make/receive calls I can ear the other part but I need to cry to the microphone if I want that the other part ears me. You noticed something similar?
Also I don't know how to suspend/resume with this version. With algepop's GPE it worked (sometimes) for me.
My board id is 0x5
Greets.
Ángel
Click to expand...
Click to collapse
Yes, microphone need some attention, need to look at it. Have to look like cr2 say around AT command.
For your suspend issue it is because Qtopia is set to shutdown alone after some seconds by default, just look in Settings-> LIgh icon -> battery and set greater value.
Actually i don't know why power button as no effect for suspend. Anyway it works to power on device after suspend just press it and be carefull to check if your backlight settings are ok ( i do this mistake many times ).
In next version i just add support for messenging system and try to look at power button too.
regards
Fabrice
I'd love to try Qtopia on my BA, but I'm running Vista on my laptop...not Linux...is there any other way to do this from Windows?
I've flashed many ROMs from many chefs, so (for me) I think this was more of an issue on my PC (ie. this is not a ROM bug)
I've got:
- Windows XP
- SP2
- fully doctored/multilated by corporate IT installing who knows what modifications to meet their security concerns
what I would see is that my Activesync connection would drop at seemingly random times.. sometimes I'd stay connected for hours, sometimes only minutes.
Sometimes I could just unplug/replug and it would re-connect. Other times it seemed to crash something running on the PC and I'd have to reboot, and often the reboot was not clean (since some driver crashed/hung)
My solution? most ROMs seem to have
Settings->Connections->USB-to-PC->Advanced Network Functionality
on... I turned it off. I haven't had a random disconnect, nor PC crash, in over a week now.
This fixes my issues too - thankfully... was ready to smash it. haha - till I found this fix from another thread..
Definately a good thing to know though.. and you dont have to search through lots of posts to find it - yet
Thank you for that. It has fixed my drama aswell.
This has been a bug in WM6.0 too. I always have to uncheck that in order to sync with the work pc. Never had any issues with home pc though!
Unfortunately, I'm finding that with the 20270 based ROMS (CRC 12.4 and PDA Corner V16), I can no longer use Activesync when I un-check the box. I get the error message:
Connection Not Valid:
Cannot open the connection '`57600 Default'. This connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
So in order to use these ROMs I have to leave the setting checked and now am losing AS connections randomly and hosing up my desktop PC I have not been able to convince either chef to look into it much.
i had the same problem and softreset solved it....
madds said:
i had the same problem and softreset solved it....
Click to expand...
Click to collapse
Please don't think I haven't both soft-reset the PPC and rebooted the PC. It does not the problem for those of us that have it.
ai6908 said:
This has been a bug in WM6.0 too. I always have to uncheck that in order to sync with the work pc. Never had any issues with home pc though!
Click to expand...
Click to collapse
Bug?.. I'm not sure... seems like a FEATURE
The same situation: under W2k (at work) preferable is uncheking, but at home (XP SP3) - works with on-checked without any problems.
zim2dive said:
Unfortunately, I'm finding that with the 20270 based ROMS (CRC 12.4 and PDA Corner V16), I can no longer use Activesync when I un-check the box. I get the error message:
So in order to use these ROMs I have to leave the setting checked and now am losing AS connections randomly and hosing up my desktop PC I have not been able to convince either chef to look into it much.
Click to expand...
Click to collapse
i'm sorry, bro...
i'm not reply your pm coz i have to many job for last a week, and actually i really really forget about that
but i make a tested today and found this:
- if i make a sync for a first time and uncheck advanced bla..bla.., so i will have this error.
- but when i did a sync and wait till my device syncing a time, contacts, etc than uncheck these option. this error message not apear.
i had tried modified usb to pc from raphael, maybe this will help us
abusalza said:
i'm sorry, bro...
i'm not reply your pm coz i have to many job for last a week, and actually i really really forget about that
but i make a tested today and found this:
- if i make a sync for a first time and uncheck advanced bla..bla.., so i will have this error.
- but when i did a sync and wait till my device syncing a time, contacts, etc than uncheck these option. this error message not apear.
i had tried modified usb to pc from raphael, maybe this will help us
Click to expand...
Click to collapse
No worries.. I realize this is not a problem that affects many people, since most folks are ok to leave Advanced enabled, and its more important to fix the bugs that affect more people... (and chef's have to have a life too)
I think I have found a solution: from http://www.xdaflameusers.com/viewtopic.php?pid=6202#p6202
change
HKCU\ControlPanel\Comm\Cnct = `57600 Default (string)
to
HKCU\ControlPanel\Comm\Cnct = `USB (string)
EDIT: I found another post suggesting to not use a `.. but the ` seems to work for me.. so try it both ways if it still gives anyone trouble.
Now it seems to work.
zim2dive said:
I think I have found a solution: from http://www.xdaflameusers.com/viewtopic.php?pid=6202#p6202
change
HKCU\ControlPanel\Comm\Cnct = `57600 Default (string)
to
HKCU\ControlPanel\Comm\Cnct = `USB (string)
Click to expand...
Click to collapse
Interesting... in my ROM "`USB" is already by default!
om-by said:
Interesting... in my ROM "`USB" is already by default!
Click to expand...
Click to collapse
Same here, but I did have trouble using AS with the advanced mode turned off. At least the first sync anyway. I turned advanced mode back off and now it seems to be working fine. Odd!
om-by said:
Interesting... in my ROM "`USB" is already by default!
Click to expand...
Click to collapse
I only started getting the AS error message with the 20270 ROMs that came out recently (when I unchecked the "Enable Advanced Network Functionality" box.. as I had been doing on all recent ROMs)
So my original hint (to uncheck the box) broke on these ROMs (for me)
I could always check the box and AS, but that was not stable (for me). I did try and doind several syncs and then unchecking the box to see if it would work then, but it would not.
What error message do you guys get on the PPC when AS fails?
Update, the "fix" (in post #10) allows me to A-S With ANF disabled, but I am losing my connection now (after random periods), just as I do when ANF is enabled
just something wonky about these 20270 ROMs in this particular area.
Code:
HKCU\ControlPanel\Comm\Cnct = `57600 Default (string)
to
HKCU\ControlPanel\Comm\Cnct = `USB (string)
work for me
zim2dive said:
What error message do you guys get on the PPC when AS fails?
Click to expand...
Click to collapse
IIRC, none - simple AS get disconnected.
om-by said:
IIRC, none - simple AS get disconnected.
Click to expand...
Click to collapse
So there are 2 problems that I mixed in to this thread
a) folks get random disconnects when using ANF for AS. The 'fix' for this was to disable ANF. For ROMs previous to 20270 this cured all my ills. I got a rock solid AS connection that never dropped randomly and did not make my PC cross-its-eyes as would happen when AS dropped when ANF was enabled.
b) but with ROM 20270, the 'fix' for a) stopped working. When I disabled Advanced Network Functionality, I got the error message about 57600 default... the only way I could AS was to leave ANF enabled. A partial 'fix' for this was to make the registry change. However I am finding that while it will allow me to AS when ANF disabled, this connection will randomly disconnect... tho so far it may not make my PC quite as wonky when it does.
Hope that summarizes things at least from my end.
just tried today and found a solution.
as i say before i have modified usb to pc from raphael and apply registry from raphael also, my hermes connected for both (check or uncheck this option).
i 'll apllied on my next rom
abusalza said:
just tried today and found a solution.
as i say before i have modified usb to pc from raphael and apply registry from raphael also, my hermes connected for both (check or uncheck this option).
i 'll apllied on my next rom
Click to expand...
Click to collapse
Sounds great!. (but no rush for me.. I'll be out of town for the weekend and don't want to flash while on the road)
abusalza said:
just tried today and found a solution.
as i say before i have modified usb to pc from raphael and apply registry from raphael also, my hermes connected for both (check or uncheck this option).
i 'll apllied on my next rom
Click to expand...
Click to collapse
Some little questions...
1) What are these modifications?
2) What are these registry settings (from raphael)? Share please.
3) Connection is stable using W2k on BB? (using XP here is no problem - by me )
In addition to problems by zim2dive:
- possible reason is wrong registry key (`57600) in ROMs, that are inaccurate ported from other devices.
And - chiao! Next week I'll be on vacations and completely without Internet!
Help, I did something wrong and I sort of cant use the phone anymore.
I installed a topbar. Unluckly I didn't read the info about it, and that it was made for Win 6.1.
I cannot access the menu, thus I cant uninstall the topbar or hard-reset my phone. There's a key combinatiou that's "Camera + Send + Power Button" that resets it. Problem resides there; My cellphone have a touch sensistive Send button, and this instruction is for a similar phone which possess a hard Send button. I can still, however, make calls and answer, send SMS's and read emails and activate bluetooth or wifi, but I can't start any app (I cant open the menu) or use the Mobile Device Center to do anything through USB (I've set it to connect directly as USB Mode and not to ask), I'll look for a Bluetooth dongle today to try to connect it through bluetooth.
I'm desperate. This phone is brand new but I already have made esthetical and hardware changes, so I've voided the warranty. Also that's a China phone, even though this particular model is able to update the ROM, I don't have the original ROM or knowledge to backup the actual one.
Any help is accepted. If there's any trick to go into "Add/Remove programs" without accessing the menus or to use some software hack to hard reset it thru Bluetooth or Wi-Fi, I'll be glad to know. If that's for any usage, I have Total Commander installed on this phone and I know how to edit the registry, but I can't start it.
Sorry for my bad english, I'm from Brazil
Thanks in advance and I'm really counting on you guys.
I'll be awaiting for an answer.
P.S.: I've been thinking - I don't know - about installing SPB Shell with some Auto Installer by the Mobile Device Center (over bluetooth) and let it start automatically, and by there, uninstall the culprit. Fiddling around, I've learnt how to trick the Mobile Device Center to make it install any CAB automatically, as if I've ran an auto-installer. My question is: would SPB Shell start automatically?
P.P.S.: Everything is working if I find another way to start it. Just the "start menu" died.
P.P.P.S.: No, I can't buy another phone. It's expensive here.
You can try MyMobiler, a PPC controller running on PC.
OR Try to remove it in Mobile Device Center if you can connect to it.
I don't have Mobile Device Center, using ActiveSync in win Xp but I believe you can remove on your Pc the partnership with your phone so next connection will start a new partnership where you can change the settings which prevent you from connecting Usb normally. Once you are connected, copy the file attached to your device, then take blackppc's advice, install MyMobiler http://forum.xda-developers.com/showthread.php?t=499344 and navigate to the file, execute and it will open settings where you'll find remove function.
I hope it helps
That's the problem, I can't connect it through USB to Mobile Device Center because I've set it to autostart as "pendrive" and not ask me about if I want it to start like this or in Mobile Device Center compatibility..
I'll buy a Bluetooth dongle in 5 minutes by now and I'll tell ya what happened
--
I.. er.. bought the dongle, but I cannot configure it. It cannot find any of my devices or enter the dongle's configuration area. It works well enough, though, on the store computer. I've tested thru 2 Windows 7 Computers and it gave me the same error.. gosh
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx or google these keywords "delete partnership Mobile Device Center" and see how.
Alright, I've managed to get the bluetooth dongle working (a Bluetooth service was disabled). Now I need to connect the phone to the Mobile Device Center. Problem is that I had connected it to MDC, but I had hard-reseted then, and seems like MDC finds the phone as a "new device", thus cannot connect over bluetooth. Can I force it to connect or something? I'm thinking that may be my only shot.
P.S.: I can access a sort of device explorer (when I put the USB cable in and out, it pops up a message asking if I want to see the Memory Card images, and then it opens a image viewer. I can delete folders from there, if that's of any use)
tito12 said:
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx
Click to expand...
Click to collapse
"On the mobile device:
If you have never attached your device to the computer using a USB cable, do so. After Windows Mobile Device Center starts, disconnect the device.
In ActiveSync, click or tap Menu, then click or tap Connect via Bluetooth."
I cant reach it
I've got an GREAT idea: I can, still, acess the image viewer. From there, I can copy and move folders around. So, all that I have to do is to create a folder in my memory card called "Start", with one shortcut inside, leading to the "Add/Remove programs" or "Hard Reset" program and copy it to the Windows folder. Then I restart the phone and it'll fire up the selected app. JOB DONE.
I only need to know the name of the app/parameters for Add/Remove programs or Hard Reset. Basing on what Windows is, it might be some "xxxx.cpl -command".
I leave this job for you guys, now I feel that I can still save my phone!!
I'll try link it to Total Commander first, before anything
P.S.: I've found the following string to invoke the "Add/Remove programs" for Windows Mobile 6.1
"#ctlpnl.exe cplmain.cpl,23?\Windows\shell.dll,13"
Would it work for windows 6.5?
P.P.S.: Meh, I cant create fake shortcuts that leads to nowhere on the local computer. How can I do it?
What a relief, God truly knows. My method worked. I can invoke anything from the phone using a shortcut. I've used the following line for the shortcut:
"33#ctlpnl.exe cplmain.cpl,10"
It invoked the "Add/Remove programs"
Thanks for the help, I really felt you guys tried to help me
I never seen a case like mine, but who knows.
Here's what I did:
- Connected the USB Cable into the phone, and it started as a pendrive
- Created a folder inside the phone called "Start"
- Created a folder called DCIM and added some images in there
- Created a .lnk file using XXMKLINK (which makes links from anything I type)
- Copied the .lnk file to the "Start" folder
- Unplugged the USB. At this moment, a popup appeared on the screen "Do you want to view the images?" Press yes.
*If the above method doesn't work, you can try going into a SMS message, then click for "Insert a Picture". The same browser will open
- Go to the root of the SD Card, or anywhere the "Start" folder you've created is
- Press and hold it, select Copy
- Click on the left side button and select "Device"
- Go to Windows folder. It takes a while to open
- Copy your "Start" folder inside. Press Yes on any prompt
- Restart the phone.
Voilá! The app will be run on the next startup
I really hope to help someone with this trick, who knows more than it helped me.
The topic can be closed at any time.
Great news
Ok so i'm pulling whats left of my hair out as I cannot seem to be able to remove this pest of a driver , windows 8.1 Pro is insisting my Nexus 5X is a TP-Link Android Phone and keeps over writing my google adb drivers so my fastboot / adb no longer works , has / is anybody having this problem? wugfresh install wont overwrite the TP-Link either all universal adb installers wont work either
MKD73 said:
Ok so i'm pulling whats left of my hair out as I cannot seem to be able to remove this pest of a driver , windows 8.1 Pro is insisting my Nexus 5X is a TP-Link Android Phone and keeps over writing my google adb drivers so my fastboot / adb no longer works , has / is anybody having this problem? wugfresh install wont overwrite the TP-Link either all universal adb installers wont work either
Click to expand...
Click to collapse
Kind of surprised you're still running Windows 8.1. Windows 10 is free for you and better in just about every way, regardless of the UI changes. Just a recommendation, though I doubt it'd fix your issue.
There's an easy way to tackle this but it depends on how the driver is being installed. If you're connecting your phone to your computer and Windows is insisting on downloading and installing this "TP-Link" driver from Windows Update, there is a way to disable this in a few easy steps. If you're connecting your phone to your computer and Windows just assumes that it's a "TP-Link Android Phone" and applies the wrong pre-loaded driver (usually gives you a notification near the clock) then we're gonna have to get a bit crafty.
EDIT: Silly question. You don't have USB tethering or any wacky app that would be causing this issue, right?
Alcolawl said:
Kind of surprised you're still running Windows 8.1. Windows 10 is free for you and better in just about every way, regardless of the UI changes. Just a recommendation, though I doubt it'd fix your issue.
There's an easy way to tackle this but it depends on how the driver is being installed. If you're connecting your phone to your computer and Windows is insisting on downloading and installing this "TP-Link" driver from Windows Update, there is a way to disable this in a few easy steps. If you're connecting your phone to your computer and Windows just assumes that it's a "TP-Link Android Phone" and applies the wrong pre-loaded driver (usually gives you a notification near the clock) then we're gonna have to get a bit crafty.
EDIT: Silly question. You don't have USB tethering or any wacky app that would be causing this issue, right?
Click to expand...
Click to collapse
Yeah we will have to get a bit crafty, i hid the TP-Link update in windows update god knows how it got installed but its in and i removed it but its still insisting its a TP-Link Android Phone , man its bugging me out . No tether app or other apps no, thats why im lost as to why its started this BS , windows i know can be tricky WIN10 was not for me plus the free upgrade has past now (29July) anyway.
MKD73 said:
Yeah we will have to get a bit crafty, i hid the TP-Link update in windows update god knows how it got installed but its in and i removed it but its still insisting its a TP-Link Android Phone , man its bugging me out . No tether app or other apps no, thats why im lost as to why its started this BS , windows i know can be tricky WIN10 was not for me plus the free upgrade has past now (29July) anyway.
Click to expand...
Click to collapse
Would you mind doing something for me before performing the steps I'm going to list below? Go into Device Manager with the phone plugged in and installed as the stupid "TP-Link" BS and find it in the list of devices. Should probably be under Portable Devices or something. Right click it and click Properties, go to the Driver tab and click "Driver Details". All of the drivers should be located in the 'system32/DRIVERS' folder. Mind giving me the names of those drivers listed? Naming convention is typically driverName.sys.
Additionally, we're going to try a Group Policy change. Hit Windows Key + R and type 'gpedit.msc' and hit enter. A window labeled "Local Group Policy Editor" should come up. Then do the following:
Expand Computer Configuration (Left hand side, the navigation panel)
Expand Administrative Templates
Expand System
Expand Device Installation
Click Device Installation Restrictions
On the right hand side, now, there should be a list of restrictions. Somewhere in that list there should be an item "Prevent installation of devices not described by other policy settings". Double-click that and another window named the same thing should pop up. In the top left, set it to enabled and click Apply, then OK.
Unplug your phone and get rid of that ****ty driver if you haven't already and then restart and try connecting the phone again to see if the same incorrect driver install occurs.
@MKD73 You ever get this sorted out?
Sorry been away on holiday for the weekend , I'll be taking a look in the morning :victory:
Please give update
Have you resolved this issue? My laptop is acting the same. Device manager sees my phone as "TP-Link Android Phone" with sub category of "Android Bootloader Interface." I can't use ADB with it, not recognized.
I tried doing what Alcolawl said but nothing happens. When I right click the "TP Link--- it just says general properties, no 'drivers' etc. I saw the 'driver' option in the "Andoid bootloader Interface" . It says the driver is: winusb.sys, wdfCoInstaller01009.dll and WinUSBInstaller2.dll. When I tried to edit the group, it says "Windows can not find gpedit.msc
Hope you can help me. My phone is stuck in fastboost mode- LG D838
kalikotpepot said:
Have you resolved this issue? My laptop is acting the same. Device manager sees my phone as "TP-Link Android Phone" with sub category of "Android Bootloader Interface." I can't use ADB with it, not recognized.
I tried doing what Alcolawl said but nothing happens. When I right click the "TP Link--- it just says general properties, no 'drivers' etc. I saw the 'driver' option in the "Andoid bootloader Interface" . It says the driver is: winusb.sys, wdfCoInstaller01009.dll and WinUSBInstaller2.dll. When I tried to edit the group, it says "Windows can not find gpedit.msc
Hope you can help me. My phone is stuck in fastboost mode- LG D838
Click to expand...
Click to collapse
Hi Kalikotpepot,
Got the same issue here., Nexus 5x keeps on rebooting, no way to get to recovery and shows as TP Link on my computer. Did you manage to sort it out somehow?
loeage said:
Hi Kalikotpepot,
Got the same issue here., Nexus 5x keeps on rebooting, no way to get to recovery and shows as TP Link on my computer. Did you manage to sort it out somehow?
Click to expand...
Click to collapse
I did it. Execute :
Code:
rundll32.exe newdev.dll,DeviceInternetSettingUi 2
and prevent driver from being installed.
Help me please!
Did you guys manage to fix it? I tried everything you people said but it didn't work. I have a Blu Vivo Xi+ and my PC only recognizes it as TP-LINK Android Phone. I dumbly deleted it's OS and all it's data when trying to update it. I only have access to TWRP and fastboot, is there a way to fix it? I would love if someone could assist me ?.