my evo 4g is fully rooted with superuser permissions, i allowed all settings, and wifi tethering seems to be fully functional on my phone, it is available on my list of wifi networks on my computer but it can only connect with limited connevtivity, if anyone has a solution i'd be grateful
-Link-
Check this link and try the advice I gave there.
niceee it worked thanks a lot man! pre-14 just came out two days ago, tried that and worked perfect, using my wifi tether to type this reply out on my laptop much appreciated
I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.
works for me
No problems for me on LG2. What exactly is the problem?
billard412 said:
No problems for me on LG2. What exactly is the problem?
Click to expand...
Click to collapse
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.
go to settings of the wifi tether app if you havent already and set it to enable the security settings so that youll need a password on any device you enable to use your phones internet signal and that should work because i was having that problem with the wifi tether app on my evo 3d and when i enabled security protection that allowed additional devices to connect to the internet. on my galaxy s3 i havent had any problems like that cause i intiially started with this method and ive been up and running just fine and im in houston so it seems the 4g lte is up and running here cause my phone shows 4g at the top for signal and my pages load up on the phones web searches faster than when its connected to my uverse wireless modem. hope this helps you man.
Sleestax said:
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.
Click to expand...
Click to collapse
Sleestax said:
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.
Click to expand...
Click to collapse
Ok if you didn't already, try gnex gsm instead. Also does the tether app show any numbers moving or do they stay at 0.0. Make sure your version of the tether app is up to date as well. And disable wake lock is unchecked in settings
I had the same issues as the op. With wireless tether change profile to galaxy nexus gsm not cdma and you must use access control. Then you should PROFIT......
Sleestax said:
I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.
Click to expand...
Click to collapse
Are you using the "WiFi for Rooted Users" app? If so be sure to change your Device-Profile.
Open App>Settings>Change Device-Profile> Select Samsung Galaxy Nexus (CDMA/LTE)
solo_element said:
Are you using the "WiFi for Rooted Users" app? If so be sure to change your Device-Profile.
Open App>Settings>Change Device-Profile> Select Samsung Galaxy Nexus (CDMA/LTE)
Click to expand...
Click to collapse
Galaxy nexus Cdma profile would not work for me i had to use galaxy nexus gsm profile for it to work for me.
Need Help!
Not working for me on the latest LG8 update...
HELP will someone please post a step by step of what you have done to get it working without any errors I've tried all steps without any success.
Thanks in advance
1afly said:
Not working for me on the latest LG8 update...
HELP will someone please post a step by step of what you have done to get it working without any errors I've tried all steps without any success. Thanks in advance
Click to expand...
Click to collapse
If your using wireless tether go to profile change to galaxy nexus gsm then enable access control and routing fix checked then you should be good.
jbadboy2007 said:
Then you should PROFIT......
Click to expand...
Click to collapse
Ok, am I the only one who doesn't know what this means? I see the term PROFIT used a lot here but I cannot figure out its definition or context. Could someone explain it to me?
Thanks.
jbadboy2007 said:
If your using wireless tether go to profile change to galaxy nexus gsm then enable access control and routing fix checked then you should be good.
Click to expand...
Click to collapse
Has anyone had a chance to try this? Did it fix the intermittent connection problems? I am going to try it later, because wifi tether is still not working for me (LG8) using Galaxy Nexus CDMA/LTE and with the access control disabled. I am just curious to see if anyone has this working as using the GSM profile is counter-intuitive for Sprint.
Sleestax said:
Has anyone had a chance to try this? Did it fix the intermittent connection problems? I am going to try it later, because wifi tether is still not working for me (LG8) using Galaxy Nexus CDMA/LTE and with the access control disabled. I am just curious to see if anyone has this working as using the GSM profile is counter-intuitive for Sprint.
Click to expand...
Click to collapse
Lol im using the gsm profile thats the only one that works for me.
jbadboy2007 said:
Lol im using the gsm profile thats the only one that works for me.
Click to expand...
Click to collapse
I tried it and the wifi tether still doesn't work. Half the time I start it, it requests Superuser and "starts" but there is no SSID being broadcast and I don't think the wifi radio is actually turned on. Every once in a while, it will broadcast the SSID, and I can connect but the up/down data stay at 0.00kb. Other times, I can connect, and I see the up/down data slowly incrementing, but I can't actually get out to the internet (or FTP, or telnet or....).
I guess I'm just fooked until foxfi or android wifi tether for root actually release a specifically-supported SGS3 version of their apps.
My issues were i could see the ap but not fully connect or allow internet access. Make sure your using access control it will not work with out it. Also make sure you have routing fix checked and use auto not ad hoc.
Sleestax said:
I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.
Click to expand...
Click to collapse
I only had issue with this on LG2, but really I have none on LG8 and FreeGS3 ver 0.0.9
jbadboy2007 said:
My issues were i could see the ap but not fully connect or allow internet access. Make sure your using access control it will not work with out it. Also make sure you have routing fix checked and use auto not ad hoc.
Click to expand...
Click to collapse
Thanks. I tried all that and still no luck. I'm on stock LG8 with root.
Sleestax said:
Thanks. I tried all that and still no luck. I'm on stock LG8 with root.
Click to expand...
Click to collapse
+1
HELP!!!
I got it to work by changing the device profile to Epic Touch 4g...tether all the time with it.
Sent from my Transformer Prime TF201
NeroDan said:
I got it to work by changing the device profile to Epic Touch 4g...tether all the time with it.
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
I'll give that a try, thanks.
*edit* I'm starting to wonder if this is an LTE-related thing. After a bit of testing, it seems like the tether works ok if I am on a 3G connection, but when I'm on LTE is when it won't work.
I'm having trouble getting the wifi tethering working on my Rogers Galaxy S3. It says it connected but with no internet access. I read some other posts where it says to try using wifi tether or foxfi from the playstore, with no luck. I also tried changing the APN settings for the tethering, I did not have any luck with either.
Im also running tasks 650 Rom if that changes anything.
Anyone have any luck getting wifi hotspot working with Rogers??
If you're connecting through a PC, bringing up the "troubleshoot problems" usually fixes it for me, worst case for me was I had to reboot the phone & restart my wifi driver on the PC
I'll try that out tomorrow and see what happens
Sent from my SGH-I747 using xda premium
You can't get it to work on LTE unless you change some coding. There's a post in Task's thread about it, I bet a little search will find it.
You can tether H+ just fine without changing anything though.
BWolf56 said:
You can't get it to work on LTE unless you change some coding. There's a post in Task's thread about it, I bet a little search will find it.
You can tether H+ just fine without changing anything though.
Click to expand...
Click to collapse
how do i set it to go into H+ mode so i can tether,and also I tried changing the APN settings as per Task's thread, it did not change anything.
Hi All,
I'm at my In-Laws place and trying to in-law's phone working with wifi tether. Phone is rootedi have tried both the normal wifi tether apk as well as the TrevE mod with auto, generic, ICS (both settings) and the Epic 4G Touch settings and have not been able to get it to work.
Could someone please tell me what settings I should use to get wifi tether to work on this phone? I've been scouring the web like crazy and can't find anything.
All help is graciously appreciated!
Thanks!
Salil
Hi There
First post!
I have a Note 3 on T-mobile.
So I had rooted kitkat using this method: http://www.galaxynote3update.com/root-tmobile-galaxy-note-3-sm-n900t-no-knox-counter-trip/ and had been using Wifi Tether router to have unlimited tethering while i'm at work.
I used this method to get to the new lollipop when it became available for my phone: http://forum.xda-developers.com/not...icial-lollipop-n900tuvufob5-t-mobile-t3046295
and now Wifi Tether Router runs, enables the hotspot, but none of my devices can see the hotspot. I've tried the SQL thing, and someone suggested trying to set the encryption to Open instead of WPA2, but that doesn't work either.
anyone else having this issue or have a fix?
gohanrocs12 said:
Hi There
First post!
I have a Note 3 on T-mobile.
So I had rooted kitkat using this method: http://www.galaxynote3update.com/root-tmobile-galaxy-note-3-sm-n900t-no-knox-counter-trip/ and had been using Wifi Tether router to have unlimited tethering while i'm at work.
I used this method to get to the new lollipop when it became available for my phone: http://forum.xda-developers.com/not...icial-lollipop-n900tuvufob5-t-mobile-t3046295
and now Wifi Tether Router runs, enables the hotspot, but none of my devices can see the hotspot. I've tried the SQL thing, and someone suggested trying to set the encryption to Open instead of WPA2, but that doesn't work either.
anyone else having this issue or have a fix?
Click to expand...
Click to collapse
Hey, i managed to get it working by changing the SSID. For some reason keeping the SSID i used before the Lollipop update wouldn't let it be seen.
Pls am having the same problem... How did u resolve yours Mr gohanrocs12.. How did u change ur ssid?
Ssid is the name that identifies your wifi network, like Netgear 77, or Lynksys. It's typically the name your network wifi router comes with when you take it out of the box and set it up.
You access it with a computer based settings program that comes with the router allowing you to change settings on your router. .
Pp.
Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks
jiggah100 said:
Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks
Click to expand...
Click to collapse
Try Google and youtube, you will find a bunch of stuff on it. Use your brand of WiFi router in search to get more specific answers.
Pp.
jiggah100 said:
Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks
Click to expand...
Click to collapse
uninstall tether app, reboot, reinstall. tether app drained my hotspot data on my plan after flashing stock lollipop.
@ bigred850 pls how and which section of my device will I find the tether app man... Thanks a lot