I have scoured forum after forum and have not been able to find a successful fix to this issue.
I have tried the APN fix that has shown up a couple times to no avail...
i am running the Slim Bean 4.2.2 rom with the kt747 kernel.
anybody else having this issue still? Any help would be most appreciated...
Also been frustrated with this. Go SMS pro seems to be working but it's not an ideal work around. Hopefully it'll get fixed. The ROM istoo beautiful to leave... Lol
Sent from my SPH-L710 using Tapatalk 2
4.2.2 as a whole is still a little rough around the edges, most likely this is not rom-specific and will be fixed as it becomes more stable
Best advice i have for now is to just go with the workarounds
btravis.elm said:
I have scoured forum after forum and have not been able to find a successful fix to this issue.
I have tried the APN fix that has shown up a couple times to no avail...
i am running the Slim Bean 4.2.2 rom with the kt747 kernel.
anybody else having this issue still? Any help would be most appreciated...
Click to expand...
Click to collapse
I know you mentioned that APN fixes didn't work for you, but this one worked for me back when I was on LiquidSmooth (4.2.2). Since then I've flashed both SlimBean (4.2.2) and my current Rom, CarbonROM (v1.3, 4.2.2) and the MMS has been working fine ever since.
Maybe if you try the APN method on a different ROM, then switch back over to SlimBean? I'm grasping at straws here, but maybe that'd work?
topherk said:
I know you mentioned that APN fixes didn't work for you, but this one worked for me back when I was on LiquidSmooth (4.2.2). Since then I've flashed both SlimBean (4.2.2) and my current Rom, CarbonROM (v1.3, 4.2.2) and the MMS has been working fine ever since.
Maybe if you try the APN method on a different ROM, then switch back over to SlimBean? I'm grasping at straws here, but maybe that'd work?
Click to expand...
Click to collapse
I'm on 4.2.2 as well (lotk pacman) and the mms fix that worked for me is gosms. I hope they get this crap squared away...
MMS
I was having the same problem, getting nowhere and being SO frustrated.. until someone elsewhere suggested making sure you only have one APN and it's fully filled out.
IE : On my phone I'm using Mobilicity and it had set up 2 individual APNs, 1 for WAP and a 2nd APN for MMS and filled them out individually (each lacking the settings of the other).
I edited the first APN and included all the same information that was in the 2nd one (MMS) in the first APN (so combined them).
MMS now working.
Mobilicity
APN: wap.davewireless.com
proxy: 10.100.3.4
port: 8080
mcc: 302
mnc: 320
MMS (New APN needed)
apn: mms.davewireless.com
mmsc: h t t p:// mms.mobilicity.net (entered with no spaces)
mms proxy: 10.100.3.4
mms port: 8080
mcc: 302
mnc: 320
APN type: mms
Related
Hello all, I decided that I would give the android project a run and see how it does. I installed and updated both the 2.1 Sense and 2.1 AOSP .cabs on the phone (removing one before installing the other, obviously). The problem I have is that I cannot get any data service on the phone in Android. When I turn on the wifi it works great here at home, but I cannot get any 2G or 3G data from the cell side. I have also tried doing the "Force CDMA" check box, but it made no difference. Is there something wrong that I am doing, or does data not work on AT&T yet? I was also able to get the GPS working, but without data its not very useful.
More Info:
AT&T Tilt 2 running latest Energy Rom (built on Windows Mobile 6.5.5) with Sense 2.5 (Cookie variant). Everything works great in Energy Rom and I get about 3.4-3.9 mbps downstream and 1-1.6 mbps upstream on 3G.
Cjaiceman said:
Hello all, I decided that I would give the android project a run and see how it does. I installed and updated both the 2.1 Sense and 2.1 AOSP .cabs on the phone (removing one before installing the other, obviously). The problem I have is that I cannot get any data service on the phone in Android. When I turn on the wifi it works great here at home, but I cannot get any 2G or 3G data from the cell side. I have also tried doing the "Force CDMA" check box, but it made no difference. Is there something wrong that I am doing, or does data not work on AT&T yet? I was also able to get the GPS working, but without data its not very useful.
More Info:
AT&T Tilt 2 running latest Energy Rom (built on Windows Mobile 6.5.5) with Sense 2.5 (Cookie variant). Everything works great in Energy Rom and I get about 3.4-3.9 mbps downstream and 1-1.6 mbps upstream on 3G.
Click to expand...
Click to collapse
Force CDMA should be unchecked, your tilt2 is a GSM device. Data works on my tilt2 just fine. Have you checked the APN settings in android it should be something like this:
Name: whatever_you_want_the_name_to_be
APN: wap.cingular
Username: [email protected]
Password: cingular1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
This worked nicely. I guess I missed where they said you have to put that in, lol. Thanks for the help, now I can use Android a little more, and hopefully they get a fully functional version going here soon.
Appreciate that, it was exactly what I was looking for.
psyopstt said:
Force CDMA should be unchecked, your tilt2 is a GSM device. Data works on my tilt2 just fine. Have you checked the APN settings in android it should be something like this:
Name: whatever_you_want_the_name_to_be
APN: wap.cingular
Username: [email protected]
Password: cingular1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Click to expand...
Click to collapse
I having the same problems, Where is that at? I can find it in Win but not android.
I found VPN
Cjaiceman said:
This worked nicely. I guess I missed where they said you have to put that in, lol. Thanks for the help, now I can use Android a little more, and hopefully they get a fully functional version going here soon.
Click to expand...
Click to collapse
lol fail........ you didn't know if you had a cdma or gsm device lol. anyhow read a little bit more and you'll be alright, you do need to know if you have a cdma or gsm device before you flash a rom
you could of bricked it fyi.........
03hdfatboy said:
I having the same problems, Where is that at? I can find it in Win but not android.
Click to expand...
Click to collapse
In Android go to Settings -> Wireless & networks -> Mobile Networks -> Access Point Names
See if your providers APN Settings are there and correct, if there are no settings hit menu and add a new APN.
A full list of APN Settings can be found here http://www.androidonhtc.com/wiki/Carrier_network_settings
dolo001 said:
lol fail........ you didn't know if you had a cdma or gsm device lol. anyhow read a little bit more and you'll be alright, you do need to know if you have a cdma or gsm device before you flash a rom
you could of bricked it fyi.........
Click to expand...
Click to collapse
I knew exactly what I have. I knew it was a GSM device, but was trying the Force CDMA to try and get it working. I had a 99.9% feeling that it wouldn't work, but gave it a try (That is how you learn. When Thomas Edison was asked about how he failed 2000 ways to make a light bulb his reply was "I didn't fail to make a light bulb, I learned 2000 ways to not make a light bulb"). You might want to think again before accusing someone of something.
Just got my phone back form being fixed (cracked screen, yayyy). Prior to fix it was rooted and everything was working great.
I get it back and had the following error: Unfortunately the process com.android.phone has stopped.
This came up twice each time the phone was rebooted/ turned on.
So, from various searches on this forum, on androidforums, and random google results this was my process:
The phone was rooted, so I un-rooted it with SuperSU and then did a factory wipe and went through the day one set-up process again.
deleted contacts and remove all accounts
clear phone cache
clear contacts cache
restored stock firmware (phone had to be rooted, so is now rooted again)
software has just been update OTA
reinstalled stock firmware using Odin3 (used Triangle away to clear count, device status was back to normal)
That fixed my error problem, but I still had no connection to my Bell LTE network. Wifi was fine, sms good, calling good, MMS not good.
I found the APN settings on this forum and created a new one using these:
APN Name: Bell LTE
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.bell.ca/mms/wapenc
MMSC proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type : <Not set>
Still didn't work, and when I restart the phone the new setting deletes itself.
So I installed two different modems as found here: http://forum.xda-developers.com/showthread.php?t=1831898
I tried I747MLALH1 first and current have I747MVLLE8 installed.
Phone is now rooted again (from installing new modems). Running 4.0.4. Device status is "Modified". Mobile Network State "Disconnected".
WTF is going on here? New SIM card maybe?
Any help would be great, but you'll have to dumb it down a little :cyclops:
Here are my settings.
acme anvil said:
Here are my settings.
Click to expand...
Click to collapse
My default APN settings are the same as those. Now, when you hit the *back* button once from that screen it takes you back to the list of APNs (though you probably just have one called "Browser"). Is the circle on the right highlighted with a green dot or is it unchecked/ empty?
Thanks for the help
It is checked. Filled with green dot. And below Browser it says pda.bell.ca
Try to remove the proxy and port line leave it blank
Sent from my SGH-I747 using Tapatalk 2
mooseknuckles1 said:
WTF is going on here? New SIM card maybe?
Any help would be great, but you'll have to dumb it down a little :cyclops:
Click to expand...
Click to collapse
Shot in the dark, but try THIS....you may need to review the first post.
It saved me and a few others I know.
dawen said:
Try to remove the proxy and port line leave it blank
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Tried that and no luck (it's the how the default APN is set up on the phone and is the only APN i have listed right now)
themadproducer said:
Shot in the dark, but try THIS....you may need to review the first post.
It saved me and a few others I know.
Click to expand...
Click to collapse
I'll give it a try thanks, don't have time tonight to read through everything and understand it, will have to wait.
mooseknuckles1 said:
Tried that and no luck (it's the how the default APN is set up on the phone and is the only APN i have listed right now)
I'll give it a try thanks, don't have time tonight to read through everything and understand it, will have to wait.
Click to expand...
Click to collapse
Good for you. I found it a bit confusing at first. I had to re-read it a few times before I attempted it. I had lost my IMEI as well as DATA ability on my Roger's S3 and this page helped me! As to how I lost it....??? Some byproduct of flashing.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Problem solved.
I skimmed through the info in the link @themadproducer provided but it didn't sound like that was a solution for me
Went into the Bell store, immediate the guy saw I didn't have an LTE SIM card so he said he doubts that is the problem but atleast when it is fixed I will have 4G internet. This was the original SIM I got back in June when I bought the phone, so I guess I was running 3G and didn't noticed since it was still blazingly faster than the 3G on my Blackberry.
We ended up calling a Bell diagnosis tech and he went backdoor on my phone, when I got it reactivated after being fixed the lady at the Bell store forgot to change/ add some things.
Good as gold now! My wonderful 6GB LTE plan is finally working and I'm not wasting money on nothing!
Thanks everyone for the help and input, much appreciated.
Hello, I have had my Note 2 for a month now. I have rooted my note several times as well as installed a few ROMS.
Initially I had this ROM installed http://forum.xda-developers.com/showthread.php?t=2016575. it worked great except the network ran extremely slow. I went back to stock until today. I installed this ROM http://forum.xda-developers.com/showthread.php?t=1987023. I screwed around with the ROM installing it a few times as I had issues with the ROM. I eventually went back to stock, now my network no longer works. I have re flashed stock ROM several times now to no avail. I am hoping someone can help me fix this issue, bare in mind I have only had it a month and I am still fairly noobish when it comes to android. Thank you.
Check your apn settings. They need to look like that
NAME : TELUS SP
APN : SP.TELUS.COM
PROXY : NOT SET
PORT : NOT SET
USERNAME: NOT SET
PASSWORD : NOT SET
SERVER : NOT SET
MMSC : HTTP://ALIASREDIRECT.NET/PROXY/MMSC
MMS PROXY: 74.49.0.18
MMS PORT: 80
MCC: 302
MNC: 220
AUTHENTICATION TYPE: NONE
APN TYPE : DEFAULT, MMS
APN PROTOCOL : IPV4
ENABLE/DISABLE APN: APN ENABLED (CHECKED)
BEARER: UNSPECIFIED
NAME: TELUS ISP
APN: ISP.TELUS.COM
PROXY NOT SET
PORT NOT SET
USERNAME NOT SET
PASSWORD NTO SET
SERVER NOT SET
MMSC NOT SET
MMS PROXY NOT SET
MMS PORT NOT SET
MCC 302
MNC 220
AUTHENTICATION TYPE NONE
APN TYPE DUN
APN PROTOCOL IPV4
ENABLE/DISABLE APN APN ENABLED (CHECKED)
BEARER UNSPECIFIED
Sent from my SGH-I317M using xda app-developers app
I now have data, with your line: "APN TYPE DUN." I don't have that option, only Internet + MMS, Internet, and MMS. I've tried all the options and the first two work while the 3rd doesn't.
If you use a international rom use APN TYPE DUN if not use Internet + mms.
I'm using jedi which is really tmh perfect no issues.
Sent from my SGH-I317M using xda app-developers app
still not working
g3minII said:
If you use a international rom use APN TYPE DUN if not use Internet + mms.
I'm using jedi which is really tmh perfect no issues.
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
I I used the telus settings provided, still i cannot send mms (pictures). Please help, thanks
This is bumping an old thread, but I have this exact same problem. I am running ProBam 4.5.0 (a CM based rom) and quite simply, I cannot receive MMS. I can send them just fine. Nothing I do in the APN settings makes a difference, and I have tried EVERYTHING. There are a LOT of Google results for APN glitchery, a lot of answers, and some devices ignore spaces and others don't. Anyway, I have also tried flashing the other Canadian Note 2 modems, after backing mine up of course. The Rogers modem from a month ago or so (I317MVLUCMK5) forced the APN to the 'Telus SP Tether' APN but although the phone, wifi, and SMS worked in both directions, MMS failed both ways. This is very sad, again changing the APN names didn't help at all there either - and sad because across the board I had much better reception. I am in a patchy cell net (With '4G' in the form of H+ but no LTE) and it wasn't my imagination - I could spray paint marks on the highway where the shadows lie, and I was seeing multiple bars through all sorts of fuzzy spots. Come on Telus...
Anyway, in desperation I am going to wipe out my entire phone and try another rom altogether, but I don't expect it to fix the MMS problem. The modem stuff isn't changed or touched by most roms, the roms themselves may react in a different way to the modem/APN needs (like for example Telus sometimes needing different names for what it perceives as an 'semi-unlocked international phone') but you should be able to FIX that problem in settings. And oh boy, I promise you I tried every conceivable combination of APN names. I even tried DEFAULT,SUPL,HIPRI,DUN,INTERNET+MMS at one point... lol
If anyone sees this and knows the answer, please... There were people reporting that unchecking 'retrieve messages automatically' in the SMS app settings cured issues, there were people that only got things to work editing the build prop to force various results to the antenna queries, etc, etc, etc. 3rd party SMS/MMS apps likewise don't work. The person sending me an MMS doesn't get an error, either, which means I went MONTHS without knowing I had this issue. Yup.
I know better than to phone Telus. Jeepers, that would be a long and fruitless phone call....
i am looking to go back to stock on my rogers zl. where can i find the firmware?
grasshoxda said:
i am looking to go back to stock on my rogers zl. where can i find the firmware?
Click to expand...
Click to collapse
I've been looking for it too. I'd like to have it as backup in case I need to send phone back to Rogers for whatever reason but it doesn't look like it's been leaked...yet.
Currently only...
4.1.2 - 10.1.A.1.395 - Generic US 1270-7584 R8A
4.1.2 - 10.1.A.1.434 - Generic US 1270-7584 R8A
for the C6506 have been leaked.
I flashed the 10.1.A.1.434 on my phone and have no issues with it but it would just be nice to have the firmware the phone came with just in case.
im on that firmware too. im having trouble with mms. i cant send or receive mms. i have lte, but i feel like it goes away frequently and im on 3g or h. u got mms working?
grasshoxda said:
im on that firmware too. im having trouble with mms. i cant send or receive mms. i have lte, but i feel like it goes away frequently and im on 3g or h. u got mms working?
Click to expand...
Click to collapse
Yeah, my MMS is working fine. My phone is 95% on LTE except at work, certain places of the building it drops down to 3G or H+ but its the case for my co-workers as well so I blame the building. Are these the settings you use for your APN
APN: ltemobile.apn
MMSC: http://mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
mms works fine.
just edit your settings
can you help me out with those settings?
Would really appreciate if someone can upload the rogers FW ><
grasshoxda said:
can you help me out with those settings?
Click to expand...
Click to collapse
read the second post here
Hello,
I'm new to these forums, but I have been using Paranoid rom on my Verizon Razr Maxx XT912 for some time now. I recently updated to the 4.4.2 Beta 1 and Beta 2 from 4.4.0 Beta 6. I'm currently running Beta 1. Things had been working fine for a couple of days, and now just recently I started getting the "No ANP on Device" notification coming across the screen. I also can no longer send MMS messages. I can not think of anything that has changed with the phone that would have started this issue.
I've tried selecting different APN choices, and I even made a new one copying the settings from another stock rom Verizon phone. None of them seem to work.
I had the network type set to Global which was default. Currently it is set to CDMA+LTE/Evdo while trying to correct the problem.
Does anyone have any suggestions or remedies for this? I'm not really sure what could be going on.
This happened to be once before with the Beta 2 rom. That is when I set the APN settings off another phone. It did not fix the problem, so I then installed the Beta 1, which as I stated before had been working fine for a couple of days. The APN settings that I had entered are :
Name: Internet
APN: VZWINTERNET
MMSC: h t tp :/ / mms .vtext .c0m/servlets /mms (typed correctly in phone, not allowed in this message)
MCC: 311
MNC: 480
APN Type: default,hipri
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
Bearer: LTE
Everything is is "None" or "Not Set"
Very frustrating not being able to send MMS and to constantly have this notification popping up at the bottom of the screen.
Thank you all in advance for any help or suggestions.