Now when I try boot into the bootloader it's stuck at "checking for SD card update". How can I fix this? I can't load into a ROM either as I flashed a ROM incompatible with my HBOOT.
EDIT: Unplugged from wall charger and it's OK, phew!
Thanks to this thread: http://forum.xda-developers.com/showthread.php?t=1619747
New question: When I'm entering the commands I keep getting this:
Lukes-MacBook-Pro-2:Fastboot Luke$ ./fastboot-mac oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOoffset = 0
INFOUpdate partition data from original MSC...
INFOoffset = 0
INFO[MSG] OKAY
OKAY
Lukes-MacBook-Pro-2:Fastboot Luke$ ./fastboot-mac flash zip firmware.zip
sending 'zip' (12876 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
Lukes-MacBook-Pro-2:Fastboot Luke$
Click to expand...
Click to collapse
How can I get it to work? Do I need S-OFF?
Bump.
Skellyyy said:
Bump.
Click to expand...
Click to collapse
The command wont work first time. do it again ( zip flash)
99 unknown fail is because your bootloader is still unlocked.
Relock it with fastboot oem lock
Then try again.
Sent from my HTC One X using xda app-developers app
bagofcrap24 said:
99 unknown fail is because your bootloader is still unlocked.
Relock it with fastboot oem lock
Then try again.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
That worked a treat, now it's working. Should it automatically reboot once the green bar is finished on the black HTC screen? It's just staying there with a full bar right now.
Right have HBOOT 1.39, when I try boot into recovery I get a red triange with a phone underneath it. Tried flashing a recovery via fastboot and get the error:
sending 'recovery' (5742 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
What can I do?
EDIT: Nevermind, I'm stupid. All I had to do was re-unlock the bootloader.
you can do fastboot reboot bootloader and check if the bootloader is updated
Related
Hello. I was following a video tutorial named: How To change Hboot + Install Jelly Bean on Your HTC One X - JB on HOX
at the stage where I use flash zip firmware.zip I can not get out of the bootloader. Please can someone guide me on how to recover my phone from this.
******RELOCKED*****
******Security Warning******
ENDEAVOUR PVT SHIP S-ON RL
HBOOT-0.43.0000
CPLD-None
MICROP-None
The commands are below which have lead to this disaster. Please can someone assist me. Thanks.
c:\htc>fastboot-windows.exe flash boot boot.img
sending 'boot' (4974 KB)... OKAY
writing 'boot'... INFOFormat partition LNX done
OKAY
c:\htc>fastboot-windows.exe erase cache
erasing 'cache'... OKAY
c:\htc>fastboot-windows.exe oem lock
... FAILED (command write failed (Unknown error))
c:\htc>fastboot-windows.exe oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
c:\htc>fastboot-windows.exe oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOoffset = 0
INFOUpdate partition data from original MSC...
INFOoffset = 0
INFO[MSG] OKAY
OKAY
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
INFOsignature checking...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... FAILED (remote: (00030003))
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... ^C
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... FAILED (remote: (00120000))
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... OKAY
writing 'zip'... FAILED (remote: not allowed)
c:\htc>fastboot-windows.exe flash zip firmware.zip
sending 'zip' (12875 KB)... FAILED (unknown status code)
I have unlocked my bootloader again (frrom the HTCDEV website). I can now get into recovery. I have restored my backup which i made before.
I then copied an old boot.img from my original rom
c:\htc>fastboot-windows.exe flash boot boot.img
< waiting for device >
sending 'boot' (4290 KB)... OKAY
writing 'boot'... INFOFormat partition LNX done
OKAY
Then thankfully my phone booted ok back to how it was originally.
You can't flash the 1.36 hboot,
coz your hboot is to low, with version 0.43.
The easiest way would be, to flash the 2.17 ruu,
and after that, you could Update your hboot.
Gesendet von meinem HTC One X mit Tapatalk 2
thanks for the reply. so where can i find the 2.17 ruu
Also can you explain a bit on the steps that I need to complete with the 2.17 ruu
uk_network said:
thanks for the reply. so where can i find the 2.17 ruu
Click to expand...
Click to collapse
htcruu.com
Searching would have got you the answer quicker.
BenPope said:
htcruu.com
Searching would have got you the answer quicker.
Click to expand...
Click to collapse
ok thanks. I should add im from the UK. Will this RUU do the job?
tcruu.com/Endeavor/RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
uk_network said:
ok thanks. I should add im from the UK. Will this RUU do the job?
tcruu.com/Endeavor/RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
Click to expand...
Click to collapse
If your phone was destined for the UK, yeah.
fastboot get version-main
Will tell you which ROM you had originally, so the 401 needs to match.
I can't get that command to work with my fastboot.
c:\htc>fastboot-windows.exe fastboot get version-main
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
The same also happens if i type.
c:\htc>fastboot-windows.exe get version-main
Sorry
fastboot getvar version-main
BenPope said:
Sorry
fastboot getvar version-main
Click to expand...
Click to collapse
For him it's 'fastboot-windows.exe getvar version-main'
version-main: 1.26.206.2
c:\htc>fastboot-windows.exe getvar version-main
version-main: 1.26.206.2
When I check on htcruu.com/?dir=Endeavor
I can find:
RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe
This has matching 206 version.
But this doesn't have 2.17 as mentioned previously.
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_sined.exe
Any ideas on which one to choose?
The one that matches. Hopefully you'll get OTA updates to 2.17.206.x
RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.120 4.90.13_release_251230_signed.exe
I do notice in the title that it says 02_UK im not on 02 im on three.co.uk would this be an issue? if so its the only RUU that has 206 in the title. Also Is this the only way to update hboot versioin?
Thanks to all who are contributing and for your continued support in this matter. I had a shock when I almost originally bricked my one x.
Well where did you get the phone from?
That's the right RUU.
You can update the firmware by locking it, flashing the updated firmware and unlocking it. Either way your phone is gonna get wiped.
I bought the phone from ebay.co.uk from the UK
I am a little confused by this picture it says 1.29.401.11
Should i go ahead with the upgrade?
When i origianly did the below command i got a different version.
fastboot-windows.exe getvar version-main
version-main: 1.26.206.2
There is a discrepancy between 401 and 206 or does this not matter? or can i now use this ruu??
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
And to confirm the next step, after this update i will need to relock the boot loader and then perform the update and then unlock it.
fastboot-windows.exe oem lock
fastboot-windows.exe oem rebootRUU
fastboot-windows.exe flash zip firmware.zip
then perform the unlock from the htcdev site.
Hey guys, dont know really where else to post this, but i need help upgrading my hboot.
Im currently on hboot 1.12 S-ON, cid VODAPO21
i tried flashing 1.36 firmware and it didnt work, gave an error remote:not allowed
i assume i need to go up in increments.
Trouble is , not sure which ones i should flash first and also where to find it. Ive downloaded RUU for my cid versions 1.26 and 1.29...not sure if you can extract the firmware from them, or how its done. Tried opening it in winrar/7-zip and could open em.
Still not there yet.
Still no luck I am afraid. I have tried both of the below RUU's and receive the error in the attached screenshot.
The RUU's that I have tried both give the same error. They are:
RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
Thanks so much to the person who can help get me upgraded to Jelly Bean.
Anyone ?? Im still wanting to update to jellybean and can't yet. Can someone please help me out this this.
You did getvar version main and it said you have a '206 ROM, if a new enough RUU can't be found, you'll have to flash a backup. If you don't have one, check the backups thread for somebody else's. It has to be '206.
BenPope said:
You did getvar version main and it said you have a '206 ROM, if a new enough RUU can't be found, you'll have to flash a backup. If you don't have one, check the backups thread for somebody else's. It has to be '206.
Click to expand...
Click to collapse
I have a backup of my stock rom. But i rooted it and then backed it up. Would this work?
Hello here is my problem.
I run my HOX on hboot 1.39 and the latest CMW but i cant enter it from bootloader i get the Red triangle and power+volume up just reboots the phone again. I took factory reset in bootloader the phone loads normal but after i unlock the lock screen i get white backround with HTC text. I dont know what to do can you give me some advices?
Reflash the custom CWM recovery or TWRP recovery
Fastboot flash recovery name-of-recovery.img
Fastboot erase cache
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot devices
HT23WW136148 fastboot
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot flash recovery openrecover
y-twrp-2.3.1.0-endeavoru.img
sending 'recovery' (6470 KB)...
OKAY [ 0.831s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.043s
It fails everytime i try to flast new/same recovery, and i still get the red trianle. Now phone works normal when i took factory reset in bootloader but the signal and wifi doesnt work.
Is the bootloader unlocked?
Sent from my One X using xda premium
I bet its locked
Its says that bootloader is relocked. And then i tried to get the new unlock code, but when i try to get the token it say command error.
Fastboot flash unlocktoken unlock_code.bin
OKAY [ 0.126s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Unknown error))
finished. total time: 49.707s
Check successfully.....did you see on the phones screen the option to unlock the bootloader ?
Yes, thank you so much for your help! :victory:
Good ... now you can continue
I am unable to flash either a recovery or boot. I get reply with devices , phone is unlocked.
Any idea how to overcome error?
C:\HTC>fastboot flash boot boot.img
sending 'boot' (5106 KB)... OKAY [ 0.618s]
writing 'boot'... INFOFormat partition LNX done
FAILED (remote: err = 0x30000)
finished. total time: 7.429s
C:\HTC>fastboot erase cache
erasing 'cache'... FAILED (remote: err = 0x19000008)
finished. total time: 0.080s
Thanks Fish
Hmm , tried on a different pc same error.
eventually wouldnt boot to recovery.
then bootloader said locked.
factory reset, now unlocked.
tried again still no flash.
left overnight, plugged into usb, flash erase worked and now flashed boot.img
fails on set up wizard stopped working.
will fully charge the try to install sebtinel rom from recovery.
Thread #3
Sent from my HTC One X using XDA Premium 4 mobile app
Hello All,
need urgent help on this issue. I am a so called novice is posting to forums , so please excuse me if I have inadvertently done or not done something important.
Following are the device details , can't provide a screenshot so typing all info -
-------------------------------------
****unlocked****
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.103.14
eMMC-bootmode : disabled
CPU-bootmode : disabled
HW Secure Boot: enabled
MODEM PATH : OFF
Apr 11 2012,02:27:11
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
--------------------------------
Used fastboot from a windows 7 command prompt and flash the recovery few times , I see the following
E:\fastboot>fastboot flash recovery recoverycwm.img
sending 'recovery' (8832 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
E:\fastboot>fastboot flash recovery recoverycwm.img
sending 'recovery' (8832 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
E:\fastboot>fastboot flash recovery recoverycwm.img
< waiting for device >
sending 'recovery' (8832 KB)...
OKAY [ 1.073s]
writing 'recovery'...
FAILED (status read failed (Too many links))
finished. total time: 1.245s
E:\fastboot>fastboot flash recovery recoverycwm.img
< waiting for device >
sending 'recovery' (8832 KB)...
OKAY [ 1.159s]
writing 'recovery'...
(bootloader) Format partition SOS done
FAILED (remote: (0000000a))
finished. total time: 1.390s
E:\fastboot>fastboot flash recovery recoverycwm.img
sending 'recovery' (8832 KB)...
OKAY [ 1.071s]
writing 'recovery'...
FAILED (remote: battery low)
finished. total time: 1.276s
Initially I had Viper ROM , then I have tried to update my HTC One X with the following ROM
SkyDragon v 2.0 HOX
but failed to do so , then I tried to recover from the Stock Rom , also failed to do it successfully.
I have tried using adb commands to transfer the rom onto the sdcard too , but fails to transfer with error
Earlier I could go to recovery mode and see the rom zip files on my storage , but now I can access the storage too.
I am in a kind of fix which I am not sure if I can come out of , so all help would be appreciated.
Hboot is to low for newer roms. They don't run on that. What's the outcome of :
Fastboot getvar version-main
Sent from my HTC One X using XDA Premium 4 mobile app
E:\fastboot>fastboot getvar version-main
version-main: 1.28.708.10
finished. total time: 0.006s
http://androidruu.com/getdownload.p...Radio_2.1204.122.17_release_268338_signed.exe
Here is a ruu for you.
Sent from my HTC One X using XDA Premium 4 mobile app
seems to be the wrong ruu , I hit the following error
The ruu is correct
Did you relock the bootloader if it's unlocked ? Did you put the phone in the bootloader/fastboot usb mode ? Did you run the ruu with admin rights ?
Sent from my HTC One X using XDA Premium 4 mobile app
yes, I did put the phone in the bootloader/fastboot usb mode and all the activity was run with admin rights.
However I am not sure how do I do this relock the bootloader if it's unlocked.
Can I unlock it or relock it as many times I need?
what is the command please? I will re-run the whole sequence again once I am able to charge the phone beyond 30%.
Charge the phone to 100% if you can. Go for safe !
Fastboot oem lock
That's the command.
Sent from my HTC One X using XDA Premium 4 mobile app
Thanks much , now I am back to stock rom and booted
I guess now I have to update HBOOT , turnback to unlocked status and try to update the ROM to some other version if I wish to ?
Yes now you have to do all official ota's you can get. After those updates you unlock the bootloader and make a nandroid backup with the custom recovery and then you start flashing other roms
Sent from my HTC One X using XDA Premium 4 mobile app
Hello i have a problem with this htc sensation of mine.. phone is Hang up in HTC logo only. i try to factory reset but its same. try to Recovery but theres no recovery only an image of unit with red triangle.. i try to download CWM here http://www.clockworkmod.com/rommanager via CMD command but its always failed. like below
i make a folder in my drive "d" name android and i put inside the recovery.img
C:\Users\Almutakhases\Desktop>d:
D:\>cd\android
D:\android>fastboot flash recovery recovery.img
error: cannot load 'recovery.img'
D:\android>
Click to expand...
Click to collapse
can someone give me a working CWM for this unit.? help me to solve this please.
Model HTC Sensation PG58130
Problem: Hang on Logo Only
Action Taken:
1. try to factory Reset = Same problem
2. Try to Recovery Mode = No Recovery Mode. displays a mobile with a triangle and red exclamation mark.
3. Try to send CWM via Fastboot or CMD command = Failed. logs below
4. try to JTAG via Riff box = same Problem
C:\Users\Almutakhases\Desktop>d:
D:\>cd\android
D:\android>fastboot flash recovery recovery.img
sending 'recovery' (5400 KB)... OKAY [ 1.476s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.175s
D:\android>
########################################################################
C:\Users\Almutakhases\Desktop>d:
D:\>cd\android
D:\android>fastboot flash recovery recovery.img
sending 'recovery' (4618 KB)... OKAY [ 1.142s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.740s
D:\android>fastboot erase cache
erasing 'cache'... OKAY [ 1.559s]
finished. total time: 1.559s
D:\android>
Click to expand...
Click to collapse
Any Advice to Solve this
Sounds like you are s on and locked. You'll need to either unlock the boot loader,or run a full,signed ruu
Also,If you have a sensation,you have put your problem in the wrong forum. This is one x
thanks scooty i found RUU for this model and its all ok now.... :good: