Develop Bugs

My Phone has no CID O_o

Hi there, i tried to flash t-mob101 firmware update for 1.36 (well i wanted to try i did fastboot getvar cid first) and i had a strange error
After doing
fastboot getvar cid
i got the answer cid:none
How can this happen? and more importantly: How can i fix it?

Try
fastboot oem readcid

Try command: fastboot oem readcid
Sent from my EndeavorU using xda app-developers app

D:\OneX>adb shell getprop ro.cid
<<<yes it returned nothing no error no anything>>>
D:\OneX>fastboot oem readcid
... FAILED (command write failed (Unknown error))
finished. total time: 0.589s
wtf?!
When i read in CID getter it says T-MOB101 but when i try to flash the new firmware for arhd it returns:
D:\OneX>fastboot flash zip firmware.zip
sending 'zip' (12877 KB)... OKAY [ 1.655s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
FAILED (remote: 99 unknown fail)
finished. total time: 2.264s

That's a lot of unknown fails.
You need to be locked to flash hboot update, so make sure you have a nandroid backup before doing it:
fastboot oem lock

Relocking did the trick. Sorry, didn't know that (was not mentioned in the firmware post or i overread it) i thought the error was not getting a cid.

[Q] problems flashing jelly bean

YEsterday i have bought my htc one x and as all te other phones i wanted a custom rom,to simunlock it , so i unlocked the bootloader , put CWMR, Root and did a nandroid backup , Then i used this guide http://forum.xda-developers.com/showthread.php?t=1920060http://
But now my phone dont want to boot and i have forgotten to put the rom on my phone either XD i did a restore already and cleaned the cache but it isn working.. who can help me ?

At wich point you are?
For put the rom into sd you can use the mount sd from recovery

I was at the poit where you put the command,fastboot oem rebootRUU, and i got straight away the silkver HTC letters and i tried to flash firmware but that didnt worked .:/

VivaLaPascal said:
I was at the poit where you put the command,fastboot oem rebootRUU, and i got straight away the silkver HTC letters and i tried to flash firmware but that didnt worked .:/
Click to expand...
Click to collapse
What was the error you got?
Dis you lock the bootloader?
Sent from my HTC One X using xda app-developers app

What is the error?

hej guys he's talking about simunlocking....that's not going to work by unlockng the bootloader ! totally different
but.....
you only need to do this :
lock the bootloader (like stated above)
fastboot oem lock
then
fastboot oem rebootRUU
then
Fastboot flash zip firmware.zip (with the firmware.zip in the fastboot folder)
that's all.....

the problem is that i cant flash the firmware, yes i locked it again , at the moment its unlocked and now hen i turn on my phone it gets stuck at the o2 screen, you are simlock free when you change your rom as far as i now:laugh: ps where is my fastboot folder?

The firmware.zip must be in the folder where you have fastboot.
Because if the zip isn't in this folder, fastboot can't flash this.

No you are not simlock free when changing Rom !
I don't know where you left it do a search for fastboot.exe file or adb.exe file it should pop up somewhere

Mr Hofs said:
No you are not simlock free when changing Rom !
I don't know where you left it do a search for fastboot.exe file or adb.exe file it should pop up somewhere
Click to expand...
Click to collapse
lol i unlocked my sensation that way XD so i put the firmware in the folder and try to push it to the phone ?

I Tried to flash the firmware again, the first two times it failed and the third time it is gets stuck at sending frimware ... C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
OKAY [ 1.747s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 3.245s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
FAILED (remote: (00030003))
finished. total time: 0.000s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...

I know because you had a S-OFF device. The HTC oke X is S-ON so you will not get it simunlocked this way !
And yes you put the firmware.zip inside the fastboot folder and then execute the commands i wrote earlier
Did you download the corresponding firmware for your CID ?.

VivaLaPascal said:
I Tried to flash the firmware again, the first two times it failed and the third time it is gets stuck at sending frimware ... C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
OKAY [ 1.747s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 3.245s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
FAILED (remote: (00030003))
finished. total time: 0.000s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
Click to expand...
Click to collapse
Fastboot oem readcid
Then download the proper firmware from mike1986 firmware post.
Sent from my HTC One X using xda app-developers app

Mr Hofs said:
I know because you had a S-OFF device. The HTC oke X is S-ON so you will not get it simunlocked this way !
And yes you put the firmware.zip inside the fastboot folder and then execute the commands i wrote earlier
Did you download the corresponding firmware for your CID ?.
Click to expand...
Click to collapse
AAh lol ok XD sending the firmware still doesnt work , my cid: O2___001 , that is equal to cidnum: HTC__001 right? i have downloaded my firmware from here http://d-h.st/users/baadnewz/?fld_id=3041#files

Nooo ow god ! They are different......O2 - HTC ....VERY DIFFERENT !
Go here and download the EXACT matching firmware
http://forum.xda-developers.com/showthread.php?t=1957376
O2__001 firmware to hboot 1.36 !

Mr Hofs said:
Nooo ow god ! They are different......O2 - HTC ....VERY DIFFERENT !
Go here and download the EXACT matching firmware
http://forum.xda-developers.com/showthread.php?t=1957376
O2__001 firmware to hboot 1.36 !
Click to expand...
Click to collapse
so i flash this and then flashthe rom ? thank you very much! feel so stupid xd

VivaLaPascal said:
AAh lol ok XD sending the firmware still doesnt work , my cid: O2___001 , that is equal to cidnum: HTC__001 right? i have downloaded my firmware from here http://d-h.st/users/baadnewz/?fld_id=3041#files
Click to expand...
Click to collapse
Hi Mate,
02__001 is not the same in anyway as HTC__001. HTC__001 is unbranded uk, 02__001 is then obviously 02 branded, do not confuse the two. Right if you have made a nandroid back up and still have custom recovery installed, have you extracted a copy of your boot image from your nandroid if so, flash the boot image using fasboot command, when phone is connected to PC, then boot in to recovery and restore nandroid.
If this is not the case you need to supply some more info about your phone, what base it was on when you got it, what HBOOT you are currently on, because if your are on a lower HBOOT than a JB firmware then you will not be able to do a JB RUU, you may have to do a ICS RUU.
So for starters
is your bootloader ***unlocked***
are you using international HOX ie ENDEAVORU
what is HBOOT ...
once the community know exactly what you are working with and what you have done people will be best placed to help you. Please bare in mind the HOX is not fully unlocked like previous HTC devices ie no "S-OFF" unless you are very lucky, so it is not as easy as just flash, there are a lot of fastboot commands to be aware of a little reading prior to actioning anything on your phone will go a long way.
Qball

qball11 said:
Hi Mate,
02__001 is not the same in anyway as HTC__001. HTC__001 is unbranded uk, 02__001 is then obviously 02 branded, do not confuse the two. Right if you have made a nandroid back up and still have custom recovery installed, have you extracted a copy of your boot image from your nandroid if so, flash the boot image using fasboot command, when phone is connected to PC, then boot in to recovery and restore nandroid.
If this is not the case you need to supply some more info about your phone, what base it was on when you got it, what HBOOT you are currently on, because if your are on a lower HBOOT than a JB firmware then you will not be able to do a JB RUU, you may have to do a ICS RUU.
So for starters
is your bootloader ***unlocked***
are you using international HOX ie ENDEAVORU
what is HBOOT ...
once the community know exactly what you are working with and what you have done people will be best placed to help you. Please bare in mind the HOX is not fully unlocked like previous HTC devices ie no "S-OFF" unless you are very lucky, so it is not as easy as just flash, there are a lot of fastboot commands to be aware of a little reading prior to actioning anything on your phone will go a long way.
Qball
Click to expand...
Click to collapse
Please read the thread next time queball
We know what he is doing ..... he just got the wrong firmware. And i already gave him the link to the right one so......
And yes flash the right firmware, flash a custom recovery, flash the boot.img from the desired rom, full wipe in recovery and a clean install of the new Rom.

just wanted to update hboot

hey guys i just wanted to update hboot and now im stuck -.-
im german and my english is not the best...sry for that
but i hope one of you guys is able to help me with my phone:good:
phone is a One X brandet O2 ger
Cid is O2___102
Hboot is 0.94
radio 1.1204.90.13
i had a venom rom viper x (from oct 2012)
i wanted to update hboot and there was a step which said relock the device. yeah that was done no prob..
now i´ve a locked device (but i´ve got the unlock token from htc)
how to use that? already tried to put that into my phone via fastboot but there comes a error message
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
i think im not able to figure that out without any help
first i think to unlock the device again and after that just update hboot and then flash cm 10.1
thx for your help

To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
Generate a new unlock_code.bin file from htcdev.com and then try again!

vin4yak said:
To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
Generate a new unlock_code.bin file from htcdev.com and then try again!
Click to expand...
Click to collapse
+1 .. Here's the firmware thread >> http://forum.xda-developers.com/showthread.php?t=1957376 <<

[Q] Can't flash any custom recovery on my m8

My m8 has an unlocked bootloader with s-on and i recently just used a nandroid backup which flashed the stock recovery and i updated to newest 5.0 update my phone was with t-mobile but it is factory unlocked now. Whenever I try to flash philz or twrp through fastboot it gives me:
target reported max download size of 1826414592 bytes
sending 'twrp' (16086 KB)...
OKAY [ 1.469s]
writing 'twrp'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.047s
How am i supposed to flash a custom recovery

Are you trying to do it in fastboot oem rebootRUU or just normal fastboot? You should be in the bootloader and just use fastboot flash recovery recovery.img

EddyOS said:
Are you trying to do it in fastboot oem rebootRUU or just normal fastboot? You should be in the bootloader and just use fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I tried both

[Q] Booting custom kernel problem [SOLVED]

Hello,
I have a M9 rooted with android 5.0.2.
I downloaded this file:
https://www.androidfilehost.com/?fid=95916177934550733
I compiled the desired kernel into Image.gz and then create boot.img on Ubuntu.
Code:
cp boot_signed.img boot.img
abootimg -u boot.img.test -k Image.gz
I then do in download mode:
Code:
fastboot boot boot.img
I get this error on boot in cmd window:
FAILED (remote: dtb not found)
How can it be fixed?
Did not saw any information about this problem on M9 forum.
Thank you in advance!

adryyandc said:
Hello,
I have a M9 rooted with android 5.0.2.
I downloaded this file:
https://www.androidfilehost.com/?fid=95916177934550733
I compiled the desired kernel into Image.gz and then create boot.img on Ubuntu.
Code:
cp boot_signed.img boot.img
abootimg -u boot.img.test -k Image.gz
I then do in download mode:
Code:
fastboot boot boot.img
I get this error on boot in cmd window:
FAILED (remote: dtb not found)
How can it be fixed?
Did not saw any information about this problem on M9 forum.
Thank you in advance!
Click to expand...
Click to collapse
The file you downloaded is a HTC RUU. To install it you need s-off and a Developer Edition M9
rename it 0PJAIMG.ZIP, place it on ext sd card formatted in FAT32, reboot your hima into DOWNLOAD_MODE, agree and it flashes the phone

clsA said:
The file you downloaded is a HTC RUU. To install it you need s-off and a Developer Edition M9
rename it 0PJAIMG.ZIP, place it on ext sd card formatted in FAT32, reboot your hima into DOWNLOAD_MODE, agree and it flashes the phone
Click to expand...
Click to collapse
Ok, Thank you! Don't really need RUU then.
I will read boot image from device with:
Code:
dd if=/dev/block/mmcblk0p63 of=/sdcard/boot.img
beacause boot is linked with /dev/block/mmcblk0p63
and then replace zImage with my kernel zImage with abootimg.

but remeber you need to be S-Off.

LLegion said:
but remeber you need to be S-Off.
Click to expand...
Click to collapse
I was able to extract boot partition and use abootimg on it to update the kernel successfully (the boot.img has 64 MB.), but
Code:
fastboot boot boot.img
does not work.
It says:
Code:
downloading 'boot.img'...
OKAY [ 3.980s]
booting...
and cmd does not return to normal after waiting 30 mins.
Is fastboot boot command deprecated? Could be a driver problem?

adryyandc said:
I was able to extract boot partition and use abootimg on it to update the kernel successfully (the boot.img has 64 MB.), but
Code:
fastboot boot boot.img
does not work.
It says:
Code:
downloading 'boot.img'...
OKAY [ 3.980s]
booting...
and cmd does not return to normal after waiting 30 mins.
Is fastboot boot command deprecated? Could be a driver problem?
Click to expand...
Click to collapse
The M9 uses aboot not hboot .. as far as I know you can't "boot" anything from fastboot

clsA said:
The M9 uses aboot not hboot .. as far as I know you can't "boot" anything from fastboot
Click to expand...
Click to collapse
Thank you!
I give the following commands:
Code:
fastboot flash boot boot.img.test
fastboot reboot
and i get:
Code:
target reported max download size of 800000000 bytes
sending 'boot' (65536 KB)...
OKAY [ 4.850s]
writing 'boot'...
(bootloader) HOSD CL#xxxxxx
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 3.870s]
finished. total time: 8.720s
but the device will return to fastboot menu.
I want to flash stock image and now i'm stuck.
Code:
fastboot flash boot boot.img
I get the following message:
Code:
target reported max download size of 536870912 bytes
sending 'boot' (65536 KB)...
OKAY [ 2.160s]
writing 'boot'...
FAILED (remote: cannot flash this partition in s-on state)
finished. total time: 2.180s

adryyandc said:
Thank you!
I give the following commands:
Code:
fastboot flash boot boot.img.test
fastboot reboot
and i get:
Code:
target reported max download size of 800000000 bytes
sending 'boot' (65536 KB)...
OKAY [ 4.850s]
writing 'boot'...
(bootloader) HOSD CL#493992
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 3.870s]
finished. total time: 8.720s
but the device will return to fastboot menu.
I want to flash stock image and now i'm stuck.
Code:
fastboot flash boot boot.img
I get the following message:
Code:
target reported max download size of 536870912 bytes
sending 'boot' (65536 KB)...
OKAY [ 2.160s]
writing 'boot'...
FAILED (remote: cannot flash this partition in s-on state)
finished. total time: 2.180s
Click to expand...
Click to collapse
The error message says your not S-OFF
Sent from my HTC One M9 using Tapatalk

clsA said:
The error message says your not S-OFF
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
How can i put the device in S-OFF mode if the device does not boot?
As i could flash a bad kernel in first step it means i had S-OFF previously?

I was able to upload my stock boot.img (the one backed-up) even i had S-ON with:
Code:
fastboot oem rebootRUU
fastboot flash boot boot.img
fastboot reboot
Don't know why in download mode i was not able to do this.
I have build number 1.32.617.6 CL493992 release-keys
Do i really need to be S-OFF to upload only my custom kernels? According to HTC i don't need to because bootloader is unlocked and:
"What is meant by unlocking the bootloader is that certain partitions are unlocked to provide write access. Specifically: boot, system and recovery. "
http://www.htcdev.com/bootloader/about_unlock_process
Answer: Yes, i need too!
Thanks!

I was able to S-OFF the device. Now the problem is that my compiled unmodified kernels from HTC site won't boot. Any ideea why?

Would i be able to convert this device to Developer Edition using AT&T RUU?

Fixed my problem by using right tool to unpack and repack boot image.
I used this one:
https://github.com/xiaolu/mkbootimg_tools

Help
I have a big problem with my HTC ONE M9. I used a custom rom and I tried to get beck to stock rom without any back up of custom or stock rom. I lost everything and I tried more but I couldn't do anything. The situation now is that I stuck in the logo with no recovery mode or bootloader mode. just download mode. S ON, RELOCKED, Software Modified.
I need your help.

elmasry82 said:
I have a big problem with my HTC ONE M9. I used a custom rom and I tried to get beck to stock rom without any back up of custom or stock rom. I lost everything and I tried more but I couldn't do anything. The situation now is that I stuck in the logo with no recovery mode or bootloader mode. just download mode. S ON, RELOCKED, Software Modified.
I need your help.
Click to expand...
Click to collapse
Sorry, can't help you much in this matter! I won't do it for the money anyway.
You could maybe re-flash a stock ROM since you have access to download mode with fastboot flash zip command. Ask a more experienced user!

adryyandc said:
Sorry, can't help you much in this matter! I won't do it for the money anyway.
You could maybe re-flash a stock ROM since you have access to download mode with fastboot flash zip command. Ask a more experienced user!
Click to expand...
Click to collapse
I tried many stock flashes but doesn't work. I don't know the stock flash of my phone. I couldn't reach fastboot. SD card is my only way