Related
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
After you flash the Rom reboot the phone and just let it fully boot. After that you can go back to CWM and flash the WiFi modules and other add-ons
You need to boot into the kernel's recovery and set it to jb mode or ics depending on your rom. Then make sure your rom and gapps don't exceed the system partition size, which it most likely did if you flashed the full gapps package as well.
The default recovery for the lupus jb kernel is TWRP, if you load into another CWM recovery it most likely did not flash to the correct partition arrangement that lupus kernel use therefore the rom can't boot.
Sent from XDA app
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
crazymonkey05 said:
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
xkeita said:
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
Click to expand...
Click to collapse
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
tallman43 said:
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
Click to expand...
Click to collapse
I did what you said but it keeps bootlooping @[email protected]
Why don't u use turbo kernel and start the process again...and no is not normal to take out your memory card to enter boot menu
Sent from my R800i using xda app-developers app
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
Cool:good:
xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Sent from my GT-I9300 On Official JB
@tallman43 thx for the help bro (Y)
wedgess said:
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Click to expand...
Click to collapse
I flashed the FTF with unlocked partitions played with the phone for about 30 secs, then flashed kernel, went to kernel menu then formated system, data, cache and davlik via CWM then flashed the rom, but that ended in bootloop, did the same with turbo kernel and it worked.
easy fix dont use Pac Rom its junk
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
use slimbean !takes less room use it with lupus kerenel jb 480 rom.
---------- Post added at 02:49 PM ---------- Previous post was at 02:00 PM ----------
Just want to tell you that your kernels are by far the best. But the PAC man rom and the Paranoid hmm Dont work I cant get them to ever boot on my R800x CDMA
Keep up the hard work.
Hi guys,
I'm pretty new to this stuff and I'm pretty desperate for some help
Currently I'm on CM 9.1 with the included kernel. I tried to change to other ROMs to see which one fits me best. The problem is, it does not seem to work in any way, i'll try to describe the progress:
+ X10 FlashTool 0.9.10.1
+ Unlocked Bootloader
- I tried to flash some ROMs and kernels, I believe they were SlimBean(latest) LightningCM2(latest) with their recommended kernels, with one kernel the procudure was to flash a ftf first, which I tried but failed, don't know why and didn't save log.
- So now my phone did nothing, I restored it to GB via Emma: developer -dot- sonymobile -dot- com/services/flash-tool/
- Flashed previous kernel and restored backup via CWM
- Back on CM9.1 FXP Kernel
- Tonight I tried to change to XPERIA Ultimate HD 3.0.1 (like 50 times) I took the following steps:
- I used the instructions as described on the thread
HOW-TO INSTALL ROM
For Unlocked Bootloaders: Flash the Recomnend Kernels; Xperia Ultimate Basic Kernel - This one is blazing fast and features an excellent Battery Life in combination with this ROM.
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
Click to expand...
Click to collapse
*Note: Recommended kernel is Vengeance so I flashed this one, the latest(1.32 anzu).
- Booted phone, got sony logo and after that black screen, let it rest for like ten minutes and it went into a bootloop.
- Rebooted couple of times, same result.
- Tried to flash it (kernel & ROM) again, several times, same result.
- Tried it again, but now flashing .587 ftf first, stopped at 13% flashing, no response for like 30 minutes.
- Restored via Emma, Flashed FXP, restored via CWM
- So then I saw the following in the XHD 3.0.1 thread:
I figured out what's wrong with mine.. It's because I came from a GB rom, did a full wipe but still when flash the rom the aroma installer is cut into half..so this is what i did . . .
To anyone having problems/bootloops/FC/ etc you can follow this:
1.Download UHD 3.0.1 rom and your desired kernel (I'm using vengeance kernel)
2.Put UHD 3.0.1 rom and kernel modules on your SD card
3.Flash your kernel using flashtool
4.Flash .587 ftf (specially when you came from GB rom) ... exclude kernel and exclude TA ...after that reboot to CWM
5.Do a FULL WIPE
6.Flash UHD 3.0.1
7.Flash wifi modules of the kernel you are using( recommended kernel is Vengeance)
8.reboot to system
9.let your rom settle for a while(at least 10 min) ..that means don't use touch your phone at first boot (at least 10 mins or so)
10.Enjoy the best ICS rom! (Good job my idol jader )
Click to expand...
Click to collapse
- It wasn't specificly my problem but I thought, why not give it a try, with ofcourse, same result(stuck at ftf).
And that's it, I searched a lot, but can't find anything because I don't know what the problem is, I guess the kernel?
I hope that someone sees what the problem is and can help me out, I'd be very thankful. I tried to be clear as possible, hope it worked.
Thanks in advance,
Best Regards,
Janoee
Re-Download .587 ftf from Zelly Cream Rom thread, u may have downloaded broken ftf! Use latest flashtool to flash ftf to phone! Then follow the directions on ZC thread and try his Rom and recommended kernels! I don't know if this will help but it's worth a try! Hit thanks if it works! Get back if it doesn't! Remember follow all directions to the letter!
Try installing flashtool (latest) again. It shouldn't be the kernel because you can flash an stock ROM and then the kernel w/o problems. Try looking for other .587 tft and verify it is for your device
Try This
Thanks for the effort,
will try these, although i've tried similir methods, I can't get any ROMs to work, only can flash kernel and then restore, nothing else works,
will report,
vashta said:
Try This
Click to expand...
Click to collapse
Tried that yesterday, will try again and report
Update: Flashing right now, looks like it is going all well
guess i had just to restart my computer
SOLVED
It worked on first try, same procedure as yersterday, guess I just had to restart the computer,
Thanks for the replies
can someone teel me how to delete/rename thread now it's solved?
Nope u can't delete threads.. Leave as is
Janoee said:
can someone teel me how to delete/rename thread now it's solved?
Click to expand...
Click to collapse
Edit post - Go Advanced - Rename
hi there
before you tell me its in the wrong section i can't post in the development section yet, i'm a new member.
so basically, heres how it is: i have an xperia play r800i(unlocked UK version) which in october i flashed free xperia kernel onto and cyanogenmod 9.1. i have now decided that i want xdark 4.0.3 on it because the wifi stopped working on cyanogenmod and it has no support for touchpads. however, i dont know if it is as simple as just going into CWM and flashing the .zip from there.
can i do that? or do i need to flash something like doomkernel? and can i flash that the same way i flashed FXP?
i am quite a noob when it comes to this, so any help is appreciated.
it is rooted and the bootloader was unlocked the official way.
thanks
Back up everything with Titanium or something similar. Then place the XDark zip file onto the root of the SD card.
Then, with Flashtool:
1) Flash R800i_4.0.2.A.0.62_phoenixvendor.ftf found here: http://forum.xda-developers.com/showthread.php?t=2184897
2) Flash LuPus ICS: http://forum.xda-developers.com/showthread.php?t=1804003
Once that's done, boot the phone and enter recovery (pressing back when LuPuS flash screen appears and phone vibrates), clear the cache and dalvik cache partitions, then install the XDark ROM. When that's all done, reboot and all should be done.
XDark seems to be suspended for now though, might be better to go for something that's still currently being supported?
thank you for your swift response, i will be doing that later.
Do both a titanium back up and a nandroid just to be safe also do the normal whipes
Sent from my R800x using Tapatalk 2
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
you shouldn't post a like or not like any developer handmake. try back to a stock..
Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason
Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:
And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?
Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!
Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying:
Hello everyone,
I finally could flash my first custom kernel (LuPuS-GBv7-full), but now each time i turn on my phone, it boots into recovery mode. When the lupus bootscreen pops up, the phone vibrates twice, the blue light turns on, then off, then the phone goes into recovery. I have searched for a solution but none works. Please help me out with this one, i cant use my phone at all.
Thanks in advance
Did you wiped system and data partition from fastboot when you flashed lupus kernel? Iit is written in kernel thread with big red "important" word. Then flash your rom from recovery.
Also, did you flashed proper stock firmware first? .62 or. 79
You could always flash stock firmware with flashtool to get working phone
Sent from my R800i using xda app-developers app
Black home screen
Bakisha said:
Did you wiped system and data partition from fastboot when you flashed lupus kernel? Iit is written in kernel thread with big red "important" word. Then flash your rom from recovery.
Also, did you flashed proper stock firmware first? .62 or. 79
You could always flash stock firmware with flashtool to get working phone
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
First of all, thank you very much for your reply, it help me a lot and calmed me down in a moment of despair (noob here as you may have already guessed).
Didn't answer right away to try out the stuff you told me and learn some more before asking again.
What I did was this (acording to the thread of the rom i want to install http://forum.xda-developers.com/showthread.php?t=2219154):
- Flashed Lupus GB with flashtools
- Boot into recovery
- Wipe data and factory reset
- Wipe Dalvik cache
- Flash the rom (AtoMic GB 7.0 - PLAY r2) I could not flash the device patch and wifi modules as instructed because couldnt find them in the thread.
- Reboot
What I get now is the phone booting into the system, but there is only a black screen with the status bar showing the battery meter, a non functioning wifi icon and the clock. The notifications area works when i drag it down, also the volume with sound and power button. There is nothing else, no app drawer, no icons, nothing.
I even tried the previous steps first flashing this stock rom Xperia Play_3.0.1.B.0.285_AT&T (http://forum.xda-developers.com/showthread.php?t=1768599), to get the same results.
My phone is a R800at, if this matters.
I kindly ask again for help to get the rom working propperly.
Thanks to your advice I could get my phone working again with a stock rom, but I really, really want to get this working, I dont like the stock rom, like most people around here dont, I suppose.
Thanks again
You are doing things right, but black screen means launcher doesn't work, but it's ROM related problem. I can't help you there much because i never used that rom.
You should try other roms. You could download few of them, place on sdcard and test and see wich one suit your taste.
I can only help you with few tips in problems that you could might find:
-"flashing" patches or modules means flashing from recovery with "install from sd card" option. Some rom makers make versions for more then one phone, so they just copy/paste text in thread, and if you can't see patches for download, it means it is already patched in newer version.
- Doomlord kernel need flashing wifi modules and you can find them in doomlord kernel thread. It use stock partition layout (system 310MB, data 380MB) so it will work if your previous kernel was stock one.
-Lupus kernel have wifi modules integrated, so no need for flashing them. But it have different partition layout (system 280MB, data 640MB), so you need to delete (wipe) system and data partition from fastboot if your previous kernel used stock partition layout. Also, use. 62 or .79 firmware because only on that firmware is possible to have bigger data partition.
-Always make sure that you are using kernel that match rom you are trying to flash. Read in rom's thread for compatible kernel
Sent from my R800i using xda app-developers app
All set!
Thanks very much for the patience and everything, i think the trick was to install first the stock rom and then a kernel and rom compatible to use with this stock rom. Everything works perfect now, thanks again!