Hey everyone,
After updated my O2 branded HOX to Jellybean (4.1.1) I have been unable to connect to my university's wifi network.
The network utilises the following security:
802.1x EAP
EAP Method - TTLS
Phase 2 Authentication - PAP
To counter the issue I have installed the network's security CA certificate under settings manually however, this didn't resolve the issue.
I would kindly appreciate any feedback users may be able to provide on this!
Sorry for bumping the thread, but has anyone shared this issue?
I have exactly the same problem. Apparently, the issue is a problem of this version of Jellybean ( 4.1.1) as there were similar problems for Nexus owners. The problem was resolved with version 4.1.2 for Nexus owners so I guess that it is down to HTC to update software and push to One X users.
dontjudgemekk said:
Hey everyone,
After updated my O2 branded HOX to Jellybean (4.1.1) I have been unable to connect to my university's wifi network.
The network utilises the following security:
802.1x EAP
EAP Method - TTLS
Phase 2 Authentication - PAP
To counter the issue I have installed the network's security CA certificate under settings manually however, this didn't resolve the issue.
I would kindly appreciate any feedback users may be able to provide on this!
Click to expand...
Click to collapse
I have a similar issue on the HTC One S after updating to 4.1.1.
Does anyone know how to raise a support ticket with HTC?
Related
Hi I have an debranded desire is there a app that can automatic apn configuration for fido,
thanks becuase i keep getting generic network failure
extreme22 said:
Hi I have an debranded desire is there a app that can automatic apn configuration for fido,
thanks becuase i keep getting generic network failure
Click to expand...
Click to collapse
no way to get auto APN,after root or upgate to FROYO,(by me is not possable)
hire is APN for all country /provider APN setings/manuel
http://blog.nowsms.com/2008/06/mobile-operator-mmsc-settings.html
If you have read my previous posts you will know that I recently tried to update to Doom Kernel and Ice Bean. I couldn't get wifi or 3G working so I tried flashing Arc Knight and Jelly Sandwich. I got Wifi working but still no 3G.
Using flashtool I changed to stock .431 firmware but I still don't get 3G. I live in South Korea and have a South Korean model Arc (LT15i) on SK Telecom. I think they use a slightly different protocol here for cellular communication (wikipedia says UMTS/HSPA), could that be the problem? I have searched the forums and the internet and not been able to find any original Korean Firmwares.
Please help, I really don't want to be using the stock firmware because of all the crappy bloatware! (I should mention that 3G/HSPA was working on the stock gingerbread firmware I was using before.)
Info: the phone's SI number is 1247-0400
Thanks
Edit: Just had a look around on some Korean sites and it seems that the global rom is working OK for them. Could it be the internet settings are not downloading from the operator correctly?
Are your antenna at WCDMA/GSM setting??
Sent from my LT15i using xda premium
Yes it is. I think it was something doom kernel did
OK... after much digging around and testing of my Korean skillz I fixed it! As I previously suspected the internet/data settings were wrong and the 'download internet settings' button wasn't working.
In case of anybody else with a Korean SK Telecom phone here is what I did:
Settings -> Wireless and Networks -> Mobile Networks -> Access Point Names
Use the menu button to bring up the option of making a new connection and use these settings:
Name: SKT
APN: web.sktelecom.com
mmsc: https://omms.nate.com:9082/oma_mms
MMS Proxy: smart.nate.com:9082
MMS Port: 9093
Authentication: none
Menu button and save. Return to the Access Point menu and select SKT.
That's it!
Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!
Check APNs
nicefella said:
Hey guys I recently got a TMO unlocked S3 that I would like to use on WIND mobile. Currently, I'm running Baseband: UVLJA and in the about phone --> Status --> the phone detects WIND, my own phone #, IMEI IMEI SV, IP Address etc and i HAVE 3G signal and everything but for some reason cannot browse the web OR send any SMSs :/
I tried flashing a WIND mobile radio but i lose IMEI! I know there is a way to use TMO S3 on WIND but help would be GREATLY appreciated
P.S. Im running CM10 stable
Thanks a bunch!
Click to expand...
Click to collapse
Did you check the APNs to make sure the internet.windmobile.ca APN is there already?
(If you haven't go to: System Settings > Mobile Networks > Access Point Names > check for Wind CA)
If you don't have Wind CA, press Menu > New APN > and in Name type Wind CA, APN: internet.windmobile.ca, MCC: 302, MNC: 490, APN type: default,supl, APN protocol: IPv4 .
Hope this works!
HOLY! Thank you so much Man you just saved me thanks a lot!!!1
Hello! I have a question. Problem with EAP authentication on wi-fi connection. Can I enable EAP-AKA or EAP-SIM on my India Rom? I need an EAP-AKA connection to connect to my subscribed wi-fi.
Hello,
My OnePlus 5T is running LineageOS 18.1, lineage-18.1-20210914 with firmware 10.0.1_dumpling
My issue : On a daily basis, some of my applications no longer have access to the Internet while others do. My device displays 4G/LTE. I have to restart my device to access the Internet. It's the same thing if I enable WiFi.
I'm in France and by default, my device was set to LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA for the preferred network.
With the code *#*#4636#*#*, in information on the phone, I changed to LTE/CDMA/EvDo/GSM/WCDMA (PRL) and I selected the radio band for Europe but the problem is still there.
I thought my mobile operator Free was the problem. But I tested my SIM card in another device and I did not encounter any problem.
Is it a firmware issue ?
I have two questions:
What is the firmware version to be installed ? Is the 10.0.1_dumpling version stable ? The LineageOS website doesn't have a link to the firmware anymore.
How to know when the problem occurs ? LOG capture ?
For information, I don't know if this is important, my device is rooted with MAGISK, I use AdAway and I have configured my DNS with Cloudflare in the network settings of the device. This doesn't seem to be the cause because when I uninstall everything, I still have the same problem.
Thanks for your help
geodemarse said:
Hello,
My OnePlus 5T is running LineageOS 18.1, lineage-18.1-20210914 with firmware 10.0.1_dumpling
My issue : On a daily basis, some of my applications no longer have access to the Internet while others do. My device displays 4G/LTE. I have to restart my device to access the Internet. It's the same thing if I enable WiFi.
I'm in France and by default, my device was set to LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA for the preferred network.
With the code *#*#4636#*#*, in information on the phone, I changed to LTE/CDMA/EvDo/GSM/WCDMA (PRL) and I selected the radio band for Europe but the problem is still there.
I thought my mobile operator Free was the problem. But I tested my SIM card in another device and I did not encounter any problem.
Is it a firmware issue ?
I have two questions:
What is the firmware version to be installed ? Is the 10.0.1_dumpling version stable ? The LineageOS website doesn't have a link to the firmware anymore.
How to know when the problem occurs ? LOG capture ?
For information, I don't know if this is important, my device is rooted with MAGISK, I use AdAway and I have configured my DNS with Cloudflare in the network settings of the device. This doesn't seem to be the cause because when I uninstall everything, I still have the same problem.
Thanks for your help
Click to expand...
Click to collapse
hi dude,
had same issue on DotOS (youtube, XDA, Signal,...) / solution is: disabling 'Battery optimisation' for each app
Hi,
Wouah, OK, I would have never thought of that, thanks for the tip.
I just disabled battery optimization on the problematic APPs and will test this.
Thanks
Hello nicorvienne,
With delay (I was able to test ) I confirm that not optimizing the battery corrects my problem.
Thanks