Related
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Flash a newer recovery prior to flashing CM10.
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Sent from my SGH-I747M using xda premium
such as
SaneinOne said:
Flash a newer recovery prior to flashing CM10.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Such as...
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
okay
GlassRaven said:
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
Click to expand...
Click to collapse
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
EdwinForTheWin said:
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
Click to expand...
Click to collapse
I don't really recommend that as that could cause unwanted trouble. From my experience, I just followed the rooting guide that I posted, flash a custom recovery, and flashed the Cyanogenmod 10. Another tip, if you don't want to lose your contacts, make a backup of it before flashing a ROM. Preferrably you write them in a paper so it would be easier. If you have important messages, use an SMS/MMS backup tool to save them. As for applications, make a list of applications that you consider are essential for you so you could just redownload them. Starting out in a custom ROM is really hard at first but you'll get used to it.
Its safety is directly proportional to your ability to follow directions.
Your first mistake was you used the app to unlock the VERIZON S3 bootloader.
All other versions of the GS 3 have unlocked bootloaders.
You should definitely do some more research before you attempt root and custom recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Can you just use ROM Manager after rooting and flashing the stock ROM to download CWM, then CM10? And is the CM10 you're using on your Rogers phone compatible? I don't see a Rogers version on the CM site. Did you use the AT&T one?
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
tonymtl said:
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
Click to expand...
Click to collapse
What does touch recovery do? And do I have to use that link to flash it, or can I use ROM Manager? And if I were to use that link, I would DL the zip, boot my phone into download mode, plug in, open Odin, make sure auto reboot and F reset time are checked, load the .tar into the PDA, and click start? What happens to the previous ROM that was there?
And when I first root my phone, and load the stock rom, do all of my apps remain? I haven't rooted yet, for my Rogers phone.
A touch recovery lets you touch the screen as apposed to using the volume rocker.
You will keep all your data.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks for the help! Another question, if I would like to unroot my phone, and decrease the flash counter, is there a thread I should see for the I747MVLLH1? I know about triangle away, but Rogers/my model isn't supported for that.
Triangle away does support Rogers gs3
Thanks! So should I flash CM10 through ROM Manager, or through the link that was posted? I'm not exactly clear on how to flash the ROM through the link though. Does flashing a new ROM erase the previous ROM? And 'wiping cache' doesn't wipe your data/apps right, only 'wipe Data and Cache'? And I don't really need to bother with kernels too right?
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
tonymtl said:
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
Click to expand...
Click to collapse
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Yes it will ask you if you want to wipe, if you download cm10 ROM from ROM manager it will ask you if you want the latest gapps. You can get ROM toolbox or titanium backup to backup your apps and restore them after flashing rom. Backup is just in case but you can always flash stock ROM later if anything goes wrong.
ily112 said:
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Click to expand...
Click to collapse
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
s0ulja said:
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
Click to expand...
Click to collapse
How exactly would I flash through cwm recovery?
Hi guys. Before you bash me saying I did not search, trust me I did.
Goal:
I am trying to install cyanogenmod 10 M2 following this guide: oh well, I guess I can't post URL's. But the guide is a wiki from cyanogenmod and is called "Galaxy Nexus (GSM): Full Update Guide"
wiki.cyanogenmodDOTCOM/wiki/Galaxy_Nexus_%28GSM%29:_Full_Update_Guide
When I get to the second command which is to enter the CW menu: fastboot boot boot.img
Problem: My phone gets stuck at the Google logo and my PC says that the driver failed to install.
Here's what I have tried doing and what I installed:
Android SDK + Google USB driver are installed
Universal Naked Driver is installed
I tried re downloading all the files and restarting
I tried changing computers
I even tried FORMATTING my computer and installing a fresh copy of Windows 7 64 bit.
My phone is showing bootloader in the device manager like it should. Everything is FINE and working except for that part. All my drivers are correctly installed on my PC. I have been trying to solve this for exactly 5 hours.
So my question is: how do I solve this ?
Thanks in advance
cheers
You don't have to manually flash the boot.img, just flash the ROM through CWM
Redownload the ROM, check md5 hash, flash away.
Restore the nandroid of your previous working state btw.
cyanogenmod's thread, FIRST POST
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Click to expand...
Click to collapse
EddyOS said:
You don't have to manually flash the boot.img, just flash the ROM through CWM
Click to expand...
Click to collapse
OK but I'm trying to get in the CWM menu. That's not working. How do I enter that menu on my phone ?
Also I don't want to root my phone.
Installing CM10 WILL root the phone as it's a custom ROM
Super n00b...
EddyOS said:
Installing CM10 WILL root the phone as it's a custom ROM
Super n00b...
Click to expand...
Click to collapse
lmao
Yep. I am a noob. My first android phone....
So I really need your help guys ..
I just learned that I need to root my phone.
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Click to expand...
Click to collapse
Ok so, I need the "instructions are available here" please Or I guess a guide to root my phone and be able to get in the CWM menu....
Ok. EDIT: I understood how it works. I'm doing it now... I'll let you know if something goes wrong. Thanks guys.
Just Google how to flash a new ROM on the Galaxy Nexus - they are plenty of how to guides and videos
ekoloud said:
Yep. I am a noob. My first android phone....
So I really need your help guys ..
I just learned that I need to root my phone.
Ok so, I need the "instructions are available here" please Or I guess a guide to root my phone and be able to get in the CWM menu....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1529058
Yeah. Thanks guys. I did it. I guess we all start by being noobs
Np, but you need to refine your search skillz.
Sent from my i9250
Do you lose LTE or other functionality with CM10 on the CDMA GNex?
shizat63 said:
Do you lose LTE or other functionality with CM10 on the CDMA GNex?
Click to expand...
Click to collapse
Dont hijack the thread. It has completed its purpose, and it should be closed.
Sent from my i9250
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Czaran said:
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Click to expand...
Click to collapse
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
BCSC said:
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
Click to expand...
Click to collapse
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Czaran said:
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Click to expand...
Click to collapse
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
BCSC said:
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
Click to expand...
Click to collapse
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Czaran said:
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Click to expand...
Click to collapse
I wouldn't use Odin. It really will only become necessary if you want to flash back to complete stock.
You do want the latest version of CWM installed or you will run into problems flashing. You can get this 2 ways.
1: through Rom Manager. You will find your specific CWM with these steps. a-Recovery Setup b-ClockworkMod Recovery c-Hit menu button to left of home and pick 'Show All Devices' d- Here scroll until you get 'Samsung Galaxy S3 (AT&T)' D2ATT. e- Click Flash ClockworkMod Recovery. Allow permissions for root. Ignore the touch option unless you want to pay for it. I can teach you the free way.
You will now have the latest CWM
You can download the latest CM-10.2, it is in release candidate stage and is extremely stable. They have been working on it for months. It will give you 4.3 (The good kind, not the one I warned against). After downloading a ROM, you leave it zipped exactly like it is. Do not extract it, just move it to your SD card. You will also want Gapps. Gapps is necessary because it is Google's own software that is legally not allowed to be built into ROMs. It must be installed separately. You can find those here. They help you know which to use with chart depending on which Cyanogen you use http://wiki.cyanogenmod.org/w/Gapps. Again just move the zip over to your internal.
With these 2 zips transferred to your phone you are ready to start. Before you do, make sure you have transferred all your pics and stuff off of the phone. Also be sure to save your contacts. You can now boot into recovery. You should notice recovery version 6.0.4.3. Volume button scrolls menu, Power button selects. You will want to do a Nandroid backup in case anything goes wrong. I know you did one with CWM 5.5 but should do another just to be sure it is with current CWM. You can delete the other one later.
Goto - backup and restore
Goto - backup to external or /storage/sdcard1 (i put both because im already on 4.4 and may have different menu than you.
Let this work and when done continue to flashing ROM
Go to 'choose zip from /sdcard'
Select CM-10-xxxxxxx.zip
After this completes you will do the same with Gapps.zip
After completion of both files you will need to factory reset your phone. Flashing AOSP over Stock will cause boot loops if you do not.
Go back to CWM main menu and select wipe data/factore reset
After completing this go to wipe cache partition and select this.
Finally you want to wipe Dalvik cache. you will find this in CWM under main menu /advanced/wipe dalvik cache.
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
BCSC said:
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
Click to expand...
Click to collapse
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Czaran said:
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Click to expand...
Click to collapse
Cool terminal emulator was that other way to do it. Hope all is well for you with this. Welcome to flashing. As another tip, if you are going to flash a lot, there is an app called Titanium backup that is well worth the $5 it costs. It saves all your apps and data and after a clean wipe you can just reinstall all your apps in one step. For example after a wipe you will not lose your Angry Birds levels if you restore your titanium data. It's worth a look.
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface
xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?
I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.