Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface
xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?
I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.
Related
i have a T989, rooted, Clockwork Mod, and installed some stock Android (sans bloatware) MOD.
i had updates set to automatic and am now being bugged to install the new TMobile update, which doesn't seem to be able to install with Clockwork, and i can't turn off the persistent Update prompts.
i've already bricked one GS2, and obviously fear doing it again. I wouldn't get another chance, i don't think. (i do have insurance on the phone, not sure if it would cover a rooted phone?)
what can someone tell me about the TMobile update and Clockwork, or whatever i need to do, go with the update or stop it somehow...?
thanks for your help.
Ota update requires stock recovery.
Grab one of the updated stock roms and flash via cwm. Then Odin the new baseband.
Sent from my SGH-T989
i think i have one of those stock roms - i chose one that was just 'the same thing but without some of the standard apps'. how can i check to see what rom i have...?
and what do you mean by baseband? the new update? is it already dl'd to my phone? i've searched through the phone's dirs (rooted File Explorere, i guess) and could not find anything...
sorry to be a pain - i can't brick another one, of course... (
is this what you mean by a 'stock updated rom':
http://forum.xda-developers.com/showthread.php?t=1312736 ?
glennnall said:
sorry to be a pain - i can't brick another one, of course... (
is this what you mean by a 'stock updated rom':
http://forum.xda-developers.com/showthread.php?t=1312736 ?
Click to expand...
Click to collapse
No, look for the KL1 release.
Baseband is your radio btw. Don't worry about the radio for now, just work on getting the rom flash.
Sent from my SGH-T989
ok, found Deodexed_KL1_T989 (T989UVKL1 by Whitehawkx) is that what i'm looking for? -
couple of questions:
he says on the post:
"DONT FLASH - add files to the zip in the app folder, then flash. Or usb connect drag to sd the use some rooted file explorer to place in system/app then reboot."
Flash or don't Flash? I'm transferring the zip to sd now, then i need to move it to system/app...?
once i've 'flashed' what do you mean "Odin the baseband"? i have Odin, used it last time...
thanks
GideonX said:
No, look for the KL1 release.
Baseband is your radio btw. Don't worry about the radio for now, just work on getting the rom flash.
Sent from my SGH-T989
Click to expand...
Click to collapse
I flashed the ROM, now i have 2.3.6, and now i'm stuck with 2 OTA notifications, one states postponed, and choosing START for the update does nothing.
help?
I had the base load on mine with a bunch of stuff frozen and Clockwork on it (plus root)
I first unfroze all the stuff I had frozen, then ODIN'd back the stock recovery. Didn't touch anything else, then told the OTA to go ahead.
It updated just fine -- removed root of course. I then ODIN'd back the clockwork recovery and re-installed SU, then re-froze all the boatware.
Done in about 15 minutes -- no muss, no fuss, didn't lose anything.
Genesis3 said:
I had the base load on mine with a bunch of stuff frozen and Clockwork on it (plus root)
I first unfroze all the stuff I had frozen, then ODIN'd back the stock recovery. Didn't touch anything else, then told the OTA to go ahead.
It updated just fine -- removed root of course. I then ODIN'd back the clockwork recovery and re-installed SU, then re-froze all the boatware.
Done in about 15 minutes -- no muss, no fuss, didn't lose anything.
Click to expand...
Click to collapse
ok, thanks - this is what i didn't understand - i can Odin back to Stock recovery?
for some reason Odin doesn't recognize my phone in download mode, but it does when i'm connected and the phone is on... any reason for this? i don't use odin in any means but download mode, right?
glennnall said:
I flashed the ROM, now i have 2.3.6, and now i'm stuck with 2 OTA notifications, one states postponed, and choosing START for the update does nothing.
help?
Click to expand...
Click to collapse
You can probably clear this up by formatting /system in CWM. Then wiping cache and dalvik. Then flash the FL1 update. Hit advance, fix permissions and then reboot.
GideonX said:
You can probably clear this up by formatting /system in CWM. Then wiping cache and dalvik. Then flash the FL1 update. Hit advance, fix permissions and then reboot.
Click to expand...
Click to collapse
did all this, nothing's changed. i'm unable to get Odin to see my phone in DL mode. when i boot into DL mode, the device manager shows an alert on my phone. in normal, the drivers work fine and Odin sees the phone.
damn.
hey guys
let me start off by saying i am a noob to this site and android in general , ive learnt a lot from my galaxy s2 .
now i got the s3 , ive rooted it .. however i tried to upgrade to 4.1 awhile back . kept getting error .
anyways i want to upgrade to jellybean im sick of waiting like everyone else.
cm10 seems like a good rom , ive read a lot on this forum, could some one tell me what the first step is do i flash cwm first on the rogers stock or do i have to put ATT stock on it
thanks
cheers
Hi!
Welcome to the site! You'll really love the community here!
Here are some simple instructions I found for you: http://www.androidauthority.com/gal...elly-bean-cyanogenmod-10-cm10-preview-104742/
Just make sure you download the latest CWM from here (6.0.1.2 currently): http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-d2att.img
And flash it to your device.
Then follow those steps, wipe/format data partition, as it says there. CAREFUL make sure you download the latest CyanogenMod version from here too, the top one on the list is always newest, latest version came out today actually: http://get.cm/?device=d2att
Let me know how it goes and if you're enjoying it! Tried leaked version of JB on my S3 with Telus in Canada and didn't like the bugs in there...so let me know if the 'CM Finishing Touch' on there is really better than stock!
Michael
thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers
totti107 said:
thanks man. i will give it a try soon and let you know..
so just i get this straight i can do everything from my rogers stock rom right .. i dont have to download the att stock rom ??
starting off with the flashing of cwm recovery ?
cheers
Click to expand...
Click to collapse
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael
greenglue said:
Yup! Start off with CWM Recovery flash, when that's done, transfer file to device (internal sd card) and from the ROGERS stock rom you can do the apply update from zip option in CWM.
Michael
Click to expand...
Click to collapse
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong
totti107 said:
hey i downloaded all the files..
first i opened odin i couldn't find cwm in the pda. so i downloaded it again and added .tar at the end of the file name so it is now visible in pda odin
i flashed it succesfully however when i go to recovery mode it goes to android system recovery ?? not cwm recovery
iam i doing something wrong
Click to expand...
Click to collapse
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.
greenglue said:
Hmm...try ROM Manager free from the Play Store. If not just google around how to install CWM, installed it a while ago so I forgot sorry. But ROM Manager should work.
Click to expand...
Click to collapse
should i take off auto reboot then take out battery... i remember doing this when i rooted the phone . i think...
oh and for rom manager i cannot find my phone on the list , there isn't any galaxy s3 on it weird?
Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here http://forum.xda-developers.com/showthread.php?t=1703488 , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
Hmm...weird. Guess it doesn't support the extra-super-duper-phone yet! Haha!
If you get the SGS3 All-in-one toolkit from here , you can install CWM from it just make sure you have drivers installed, it can help you with that if you don't have them, and enable USB Debugging.
If that doesn't work, which I think it should, try to use this link a bit. Download the version they have it should be pretty recent.
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery
totti107 said:
i cant find my phone version on the tool kit :S
but why cant i get cwm to work with odin ? that is angering me lol
i just rooted it again with superuser with galaxys3uscanada and installed superuser through cwm version 5. somthing
hxxp://androidroot.org/watch_video.php?v=28GYMH82S6Y1#
with this video... but i had to remove the battery and take auto reset off for it not to overwrite cwm recovery
Click to expand...
Click to collapse
Oh so now you have CWM? Well as long as you have it, you'll only need it once or twice to erase all data, then install CM and GApps.
Ill try it with the cwm from the superuser one but I remember doing that it said error 9 or something
Sent from my SGH-I747M using xda premium
Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?
ily112 said:
Quick question, I flashed CWM recovery using the terminal, and I see it when I boot into recovery, but when I go to ROM Manager to flash CM10, it says to flash CWM Recovery, and won't let me access the list. I would've flashed CWM from ROM Manager, but the S3 wasn't on the list of devices. Is there anyway to get around this?
Click to expand...
Click to collapse
Hi there!
Basically you must first but the CWM ZIP file on your internal sdcard then boot into CWM, from there go to install zip file or something like that, then select from SD Card, find the zip, you're done!
Don't forget to do a factory reset through CWM before the CM10 update and maybe after too.
Let me how it goes,
Michael
Never liked CWM, I personally love TWRP as a recovery. Go to the app store and download GooManager.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!
ily112 said:
But don't I already have CWM? Or is CWM and CWM Recovery two different things? Where would I get the CWM .zip for my rogers phone? I backed up my phone from recovery mode, does that mean I backed up my current ROM (stock rooted ROM)? And I backed up a few apps using Titanium Backup, if I use factory reset, would all my backups get erased? Thanks for your help!
Click to expand...
Click to collapse
Hi,
CWM = CWM Recovery; same thing just shorter .
The ZIP file for your rogers phone can be found here: http://get.cm/?device=d2att
Click the one at the top of the list as it is the newest.
Don't worry about the ROM because worst case scenario if you want to downgrade to stock, you can re-download it online and re-root.
For the apps, it depends where your backups are, usually, in TitBak, the backups are stored in /sdcard/TitaniumBackup which will be safe as formatting to factory settings and data partition in CWM doesn't format the internal or external SD Card. But I am not responsable if it does so be careful!
Michael
Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?
ily112 said:
Also, I just got a notification to update SuperUser, which takes me to the Playstore, but on I remember seeing not to update SuperUser on the thread where I was told how to root my phone. So do I update it or not?
Click to expand...
Click to collapse
You can update it, I don't see what could go wrong because an update will only help fix things if there were bugs you had.
Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?
ily112 said:
Okay, thanks! I'm going to use this <http://forum.xda-developers.com/showthread.php?t=1587607> guide to flash the cm ROM. But say afterwords, I want to unroot and remove the 'Modified' status of my phone, and return back to the stock ROM like nothing happened, and remove the flash counter. How would I do that?
Click to expand...
Click to collapse
That would be with Odin you would redownload the Stock ROM for Rogers and then flash it. To reset counter, you can download the app TriangleAway for free from the Play Store and with root, it resets the counter. Then you can unroot.
Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!
Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium
Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464
A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.
The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium
This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.
I am trying to get this ROM installed on my Sprint S3: http://forum.xda-developers.com/showthread.php?t=2148306. My phone is rooted and I have TWRP 2.5.0.0 installed. When I download the file on my pc and transfer it to my phone, I boot into recovery, wipe the data as recommended (already did a backup), and when I try to install, it says "Failed". I can get some other ROMS to work (Goodness, etc.) but this one I can't. The file name is Liquid-JB-v2.5-OFFICIAL-d2spr.zip. Any ideas as to where to start? I can't post in that ROM thread because I don't have more than 10 posts.
Any help is greatly appreciated!
robertfah said:
I am trying to get this ROM installed on my Sprint S3: http://forum.xda-developers.com/showthread.php?t=2148306. My phone is rooted and I have TWRP 2.5.0.0 installed. When I download the file on my pc and transfer it to my phone, I boot into recovery, wipe the data as recommended (already did a backup), and when I try to install, it says "Failed". I can get some other ROMS to work (Goodness, etc.) but this one I can't. The file name is Liquid-JB-v2.5-OFFICIAL-d2spr.zip. Any ideas as to where to start? I can't post in that ROM thread because I don't have more than 10 posts.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Down load it again, sounds like you got a bad one
robertfah said:
I am trying to get this ROM installed on my Sprint S3: http://forum.xda-developers.com/showthread.php?t=2148306. My phone is rooted and I have TWRP 2.5.0.0 installed. When I download the file on my pc and transfer it to my phone, I boot into recovery, wipe the data as recommended (already did a backup), and when I try to install, it says "Failed". I can get some other ROMS to work (Goodness, etc.) but this one I can't. The file name is Liquid-JB-v2.5-OFFICIAL-d2spr.zip. Any ideas as to where to start? I can't post in that ROM thread because I don't have more than 10 posts.
Any help is greatly appreciated!
Click to expand...
Click to collapse
It's either a bad download like evoer said, but more likely it's the firmware you're on. Starting with v2.5, you need to be on MD4 before you can flash the Rom. It'll fail otherwise.
The best way to get on MD4 is to go over the Freeza's Stock Rooted Rom thread and grab the MD4 Firmware update zip:
MD4 Firmware:
MD4 Firmware/modem/baseband update
MD5: EEEAFDBE59CF9C5B492B1A591EC92D02
Click to expand...
Click to collapse
The filename should be: Galaxy-S-fre3-MD4FirmwareModemAIO.zip
Just boot into recovery and flash this zip. Restart your phone and verify in Settings - about phone that the baseband ends with "MD4." Then reboot into recovery and flash LiquidSmooth like normal.
Let me know if you have any more problems.
evoer said:
Down load it again, sounds like you got a bad one
Click to expand...
Click to collapse
Yeah, I did that....I even tried to download the latest from GooManager and still got the same results. I'm surprised no one else has said anything, either that or something's jacked on my phone
topherk said:
It's either a bad download like evoer said, but more likely it's the firmware you're on. Starting with v2.5, you need to be on MD4 before you can flash the Rom. It'll fail otherwise.
Click to expand...
Click to collapse
I'm thinking this is it....I am dling it now and will let you know. Should I run it right from TWRP (I currently don't have any ROM installed but I can mount my sdcard and access the file that way) or do a restore and then run it?
robertfah said:
I'm thinking this is it....I am dling it now and will let you know. Should I run it right from TWRP (I currently don't have any ROM installed but I can mount my sdcard and access the file that way) or do a restore and then run it?
Click to expand...
Click to collapse
Restore any working rom, flash md4, go to settings and verify. Flash liquid...should be golden
atesamc days
topherk and evoer, thanks a BUNCH for helping me with this. That was the problem. As soon as I did a restore, flashed the new MD4, verified it, then flashed liquid, it worked like a charm!
Thanks again! :good:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Reflash in Odin.
Make sure you have the correct stock rom. If you flash the "md5" you may have flashed the wrong thing. The md5 is not tge firmware, that is just the code that verifies your firmware file is not corrupted.
If your old apps were still there, you flashed the wrong thing. There is no way to flash stock firmware in odin and not wipe the data partition.
You are correct then
Yeah, I flashed a tar.md5 in Odin. It gave me a new ROM but all my apps are there. After all that, I still can't go to recovery. I tried using the terminal and ROM Toolbox to go there, both didn't work. Can I just leave it as it is and find a way to recovery or is the only way to go to bootloader and flash a correct file to get to recovery?
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
serio22 said:
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
Click to expand...
Click to collapse
It depends on what you ate flashing.
If you are flashing a full stock factory image it will wipe user data. If you are just flashing a system partition it won't.
Essem G said:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Click to expand...
Click to collapse
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
g7755725 said:
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
Click to expand...
Click to collapse
Also this. This gives you more control over the whole process
Skipjacks said:
Also this. This gives you more control over the whole process
Click to expand...
Click to collapse
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Essem G said:
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Click to expand...
Click to collapse
The first post of any customized stock rom will tell you if its deodexed. If it doesn't say it...its not.
@Essem G:
Any updates for us? I'm following this thread because I have similar problems with my WiFi not working after upgrading from 4.2.2.
Any luck getting TWRP flashed?
Also I believe that the stock firmwares do come as tar.md5's, as in the file: M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 from ShinySide's stock firmware thread.
As for the WiFi issue, from the hours of reading I've done it looks like this problem occurs when you upgrade your firmware, but it no longer matches the bootloader. Such as bootloader (Baseband) showing MDL, but Build Number showing NH7, NK2, etc. What does your show?
This thread may be of use to you when you get back to a working ROM. Good luck!
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Essem G said:
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Click to expand...
Click to collapse
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
g7755725 said:
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
Click to expand...
Click to collapse
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks
Essem G said:
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks[/Q] it should
Click to expand...
Click to collapse
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Essem G said:
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Click to expand...
Click to collapse
Have you tried my gamerrom Ultimate 1 its basically stock touchwiz of if Official NK2 M919UVUFNK2 with stweaks and no bloatware here is the thread gru 1 is in.the botyom of the thread http://forum.xda-developers.com/galaxy-s4-tmobile/development/stock-os-gamerrom-ultimate-2-touchwiz-t3078467
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Essem G said:
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Click to expand...
Click to collapse
If you're trying to go back to complete stock then just Odin NK2 firmware. http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508 I used the NK2 from here about 2 days ago to go back to stock.