I purchased a sprint galaxy note II that had aleady been flashed to metropcs for a good deal. I was able to get it activated for metropcs and currently have voice and mms functioning correctly. I have run into a dead end in trying to get the data to work for the phone. I have used the Galaxy Note2 toolkit. I am new to Odin and Clockwork Mod in general so this is becoming a bit tedious for me. I flashed the synergy Rom yesterday in a feable attempt to get my "data" back on track but now i realize I need help and guidance from the experts of the forum. Any guidance to point me in the right direction would be appreciated- for example- do I need to flash a radio, kernel, etc?... I hope I don't come off as a complete idiot considering I have spent hours on getting this thing Rooted- I really don't know what to do now. Thanks for the help.
Search for my guide on the galaxy s3 forum here. It worked for the evo 4g, evo 3d and galaxy s3, it should work on the note 2.
You wont get data without the proper provisioning. On these phones that requires using dfs or cdma tools. On htc phones it can be done with qpst.
Do the provisioning part of the guide and that should work.
Sent from my SPH-L900 using xda premium
Max_Pain said:
Search for my guide on the galaxy s3 forum here. It worked for the evo 4g, evo 3d and galaxy s3, it should work on the note 2.
You wont get data without the proper provisioning. On these phones that requires using dfs or cdma tools. On htc phones it can be done with qpst.
Do the provisioning part of the guide and that should work.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Thanks Max, I figured the S3 would be a good place to start. I will work on it today.
Ok- Started the work on this today and wanted to give an update and where I am stuck. I am at BloodyKiller 86's section of the provisioning. I'm on windows 8- I installed the Diag drivers and can now see in my device manager a tab under modems that lists "Samsung Mobile USB Modem." In checking the properties it shows Com 3. On my Galaxy Note 2 when I do ##3424# it pulls up a PhoneUtil screen(UART)- I can either select CMDA Modem or PDA and then below that there is a Qualcom USB SETTING tab that gives me the following options: (mtp), (mtp+adb), (ptp), (ptp +adb), (RMNET+DM+Modem), and (DM+Modem+ADB). I am now stuck with using CDMA Workshop. I downloaded the demo version and am not sure if this is the reason i am getting stuck. I have chosen COM 3(shows in the properties of the Samsung Modem) and can connect to it successfully but when i attempt to Read Device in DM mode it gives me the "Failed...Device does not answer." I have tried choosing the different options above and connecting but to no avail. I am hoping you may have some advice for me. I appreciate all your hard work and will continue to work on this until I get this Note 2 working with Data.
mms help?
hi how can you get the mms working on Note 2 from verizon working on metropcs, i am not rooted but do have data working.
---------- Post added at 01:44 PM ---------- Previous post was at 01:40 PM ----------
i have Verizon Samsung Galaxy Note 2 i would like to know if i can switch my phone which is flashed to metropcs can be switch back to verizon 4g lte service. is there a guide to help you fix all setting from metropcs to verizon
Me too need help
Sent from my SPH-L900 using xda app-developers app
4G not working....3G is working
Can I get the link to your thread on the Galaxy S3 problem for data?
Related
Hi guys, I posted on the Dinc forum in the past(I used to own one but sold it to my father and got a NS4G). He may get the Dinc on Page Plus, I would like to know if running ICS on it(or another custom rom) will prevent him from getting/flashing his phone on Page Plus?
Page Plus
I use page plus on my rooted Incredible with no problems.
Ditto, no problem using Pageplus with custom ROM.
DInc with CyanogenMod 7.1
Droid Incredible using Condemned CyanogenMod on Page Plus here. No problems to report.
So you guys got service on them while running a custom rom?
Sent from my Nexus S 4G using Tapatalk
Verizon Note 2 on pageplus
Hey, I flashed my verizon samsung note 2 to pageplus but I couldn't get my mms and data working without a sim card. And when I put my sim card, it auto dials the sim activation and there is a message 'please wait until your phone has been activated'. It keeps doing that for a long time and keeps auto dialing the activation. Is there anyway to bypass this activation and get my data work or is there anyway to simply get the data on pageplus without using the sim card? Any help will be appreciated. Thank you..
Undo the pageplus flash
Hi there, I flashed a verizon samsung galaxy s4 to pageplus and now I want to be back to normal carrier verizon. I did the hard reset and activated my verizon sim card. But, the call and text doesn't work, only the 3G data works. The IMEI number on the phone is different from the back of the battery. Any help how to solve this?
grimdemon1 said:
Hey, I flashed my verizon samsung note 2 to pageplus but I couldn't get my mms and data working without a sim card. And when I put my sim card, it auto dials the sim activation and there is a message 'please wait until your phone has been activated'. It keeps doing that for a long time and keeps auto dialing the activation. Is there anyway to bypass this activation and get my data work or is there anyway to simply get the data on pageplus without using the sim card? Any help will be appreciated. Thank you..
Click to expand...
Click to collapse
(yes I know this is older but still applies)
grimdemon1 said:
Hi there, I flashed a verizon samsung galaxy s4 to pageplus and now I want to be back to normal carrier verizon. I did the hard reset and activated my verizon sim card. But, the call and text doesn't work, only the 3G data works. The IMEI number on the phone is different from the back of the battery. Any help how to solve this?
Click to expand...
Click to collapse
Sorry, but try in your device's forum. This is for the HTC Incredible.
I have my incredible on straight talk works great and running pacman20.1 wish video worked better
I have had two Droid Incredibles on Pageplus - both running custom ROMS. No problems encountered with either.
Good luck.
---------- Post added at 10:34 PM ---------- Previous post was at 10:11 PM ----------
Woops, sorry...just noticed that the OP was very old...
People on ebay are offering to flash the Incredible to Page Plus for a fee. This is a ripp off. The Incredible unlike 4G phones can be moved to Page Plus without any flashing. Mine works fine and I've used many different ROMs.
All his Big Brothers have been taken down ......... Epic 4G, EVO 4G, EVO Shift, EVO 3D, Epic 4G Touch, Nexus S. and even some VZN Phones have all been Flashed over to Boost Mobile, will the Almightily Heavy weight champion of the Smartphone WORLD be a challenge?? I'm planning to take him down (KTFO) as soon as I receive it in my Lake of the Woods next week. But if you take him down first tell us about it............Happy Flashing
I am also waiting for mine to try and flash.
Does anyone one know if verizon gs3 also uses qualcom chipset?
Sent from my SPH-D710 using xda premium
i got mine today yey!! i flash it to my verizon prepaid account i also have the evo lte and the s3 feels alot faster and for some reason internet speeds are faster to... in advance qpst doesnt read it i tried avery version so your gonna need workshop for sure :good:
trezegol said:
i got mine today yey!! i flash it to my verizon prepaid account i also have the evo lte and the s3 feels alot faster and for some reason internet speeds are faster to... in advance qpst doesnt read it i tried avery version so your gonna need workshop for sure :good:
Click to expand...
Click to collapse
CAn you give us a step by step? I have always flashed Samsung's phones/pads with qpst. How do you go about doing the CDMA workshop? thanks
I might get a GS3 from sprint.... but im gonna try and flash it to pageplus cellular since here at work they dont let me flash sprint phone to boostmobile
Hey try DFS, that software is a beast it has read almost every phone for me. I don't have my S3 yet so I can't confirm it to work but i believe in it.
ranchosteve said:
I am also waiting for mine to try and flash.
Does anyone one know if verizon gs3 also uses qualcom chipset?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
ghanafirst said:
Hey try DFS, that software is a beast it has read almost every phone for me. I don't have my S3 yet so I can't confirm it to work but i believe in it.
Click to expand...
Click to collapse
Has anyone be crack the sg3 yet? I want get my on boost?????
Unfortunately not.. I have a boost and sprint account I have an epic on boost and I have me s3 on Sprint... I haven't really tried yet but might give it a try this weekend, I know it reads with dfs and workshop just haven't tried anything yet, but this is one bad a** phone!
kevo3000 said:
Unfortunately not.. I have a boost and sprint account I have an epic on boost and I have me s3 on Sprint... I haven't really tried yet but might give it a try this weekend, I know it reads with dfs and workshop just haven't tried anything yet, but this is one bad a** phone!
Click to expand...
Click to collapse
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.
My Friend already flashes hes Sprint Galaxy S3 to Boostmobile with 3G data and mms working....
Nice I'm thinking about getting a s3 from best buy and paying full price and getting a warranty and flash to boost
Sent from my SPH-M930BST using xda app-developers app
AlpineMan said:
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.
Click to expand...
Click to collapse
Have you tried qpst 2.7.374?
kevo3000 said:
Have you tried qpst 2.7.374?
Click to expand...
Click to collapse
You have to use DFS tool
kevo3000 said:
Have you tried qpst 2.7.374?
Click to expand...
Click to collapse
I got a hold of QPST 2.7 build 378. This version is able to read more info from the Galaxy S3 than build 366. I'm able to launch EFS Explorer and see most (if not all) the NV Items. I'm not able to use Service Programming however. As soon as I enter the MSL, I get an error message saying "Roaming list receive failed". It looks like the latest build is 385. I'm wondering perhaps this build will be able to fully read/write the GS3. If anyone has a link to QPST 2.7 build 385, please share.
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
JUSMEJOSE said:
You have to use DFS tool
Click to expand...
Click to collapse
Do you think you and/or your friend can share with us how you guys did it using DFS? Thanks.
Ill tell him how if he can do a guide or something....
I flashed to Sero.
I used qxdm 3.12.714, which connected fine. I tried QPST.2.7.374 and was not able to connect to phone. "PRL error". CDWS connects but some features don't work, but its enough to get the phone programmed and 3g.
.
ranchosteve said:
I used qxdm 3.12.714, which connected fine. I tried QPST.2.7.374 and was not able to connect to phone. "PRL error". CDWS connects but some features don't work, but its enough to get the phone programmed and 3g.
.
Click to expand...
Click to collapse
Do you mind sharing that version of Qxdm been looking for that one! Thanks..
---------- Post added at 03:50 PM ---------- Previous post was at 03:41 PM ----------
AlpineMan said:
I got a hold of QPST 2.7 build 378. This version is able to read more info from the Galaxy S3 than build 366. I'm able to launch EFS Explorer and see most (if not all) the NV Items. I'm not able to use Service Programming however. As soon as I enter the MSL, I get an error message saying "Roaming list receive failed". It looks like the latest build is 385. I'm wondering perhaps this build will be able to fully read/write the GS3. If anyone has a link to QPST 2.7 build 385, please share.
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
Do you think you and/or your friend can share with us how you guys did it using DFS? Thanks.
Click to expand...
Click to collapse
I second this, Also is that qpst 2.7.385 the latest one, I'm surprised that cdws hasn't updated its software to not need these other ones like Dfs.
kevo3000 said:
Do you mind sharing that version of Qxdm been looking for that one! Thanks..
---------- Post added at 03:50 PM ---------- Previous post was at 03:41 PM ----------
I second this, Also is that qpst 2.7.385 the latest one, I'm surprised that cdws hasn't updated its software to not need these other ones like Dfs.
Click to expand...
Click to collapse
QXDM v3.12.714 : http://hotfile.com/dl/114670632/36a0d73/QXDM_3.12.714_winxp.rar
Anyone have QPST 2.7 build 385?
AlpineMan said:
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.
Click to expand...
Click to collapse
In DFS the fields to fill out for Profile 0 and Profile 1 are under Programming >>>Mobile. IP
Yes, I figured that before posting. It however is still operating at 1xRTT. So there must be something else I'm missing that needs to be changed in DFS.
Sent from my SPH-D710 using Xparent ICS Blue Tapatalk 2
Do anybody that has the Samsung Epic 4G Touch flashed to Virgin Mobile usa CDMA? So basically I see videos on youtube of the Epic 4G Touch flashed to Boost Mobile. I already have HTC EVO 4G flashed to Virgin Mobile. Is it the same process just all I need is the DIAG drivers like could I use this guide http://forum.xda-developers.com/showthread.php?t=1404270 or this one http://forum.xda-developers.com/showthread.php?t=1419488 just put my virgin mobile information. And I'll be good to go right? I just wanted to be sure someone else has it flashed to Virgin Mobile.
My e4gt is on virgin mobile. Its the same process as the original epic.
Sent from my SPH-D710 using xda app-developers app
hello, I have a sph-d710 epic 4g that I purchased with a bad esn.I have already followed a few posts on how to get it working on virgin mobile and changed all the info from the donor phone to the epic.My problem is that when I make a call i get the "error 16" can anybody help me how to fix this? I dont have any info on the sprint account it was on, just in case you suggest I would need to call sprint customer service. Thanks in advance!
Can you guys teach me how to flash it to virgin mobile its already flashed to cricket can I still flash to virgin mobile?
sent from my Galaxy s2 (T-Mobile) Rooted Running Darthstalker #3 .
Ddevil6669 said:
hello, I have a sph-d710 epic 4g that I purchased with a bad esn.I have already followed a few posts on how to get it working on virgin mobile and changed all the info from the donor phone to the epic.My problem is that when I make a call i get the "error 16" can anybody help me how to fix this? I dont have any info on the sprint account it was on, just in case you suggest I would need to call sprint customer service. Thanks in advance!
Click to expand...
Click to collapse
Dial any number, error 16 will go on.
Wait on the phone, it will transfer you to customer care.
Answer some questions and they will refresh your account on their end.
Done
I tried calling a number then I got error 16 and waited.a machine aswered and says to call the number provided by your service provider.Also, when you say to answer a few questions, are they gong to ask me anything about the sprint account? As I said before I don't have any info on the account,not even the phone number.
---------- Post added at 11:17 PM ---------- Previous post was at 11:05 PM ----------
Galaxysm said:
Can you guys teach me how to flash it to virgin mobile its already flashed to cricket can I still flash to virgin mobile?
http://forum.xda-developers.com/showthread.php?t=1404270
follow this step by step. This is how I got my phone working.
Click to expand...
Click to collapse
virgin mobile is also very stingy when it comes to people using other phones on their network xD.
I'm having issues when it comes to the ##DATA# manual programming. I completely flashed my SPH-L710 (Sprint) to MetroPCS with Talk, Text, Data & for the most part MMS working just fine. EVERY SINGLE TIME I do the ##DATA#, within less than 20 seconds my signal drops to nothing, then resets the signal. After I set up everything in the ##DATA# part I reset the phone its gone by the time my phones powered back on when I check the data profile by doing the ##DATA# part and just VIEW, not EDIT everything is gone from when I programmed my Data Profile, EVDO, Advanced, Others etc.
I'm attaching pics in order so you know what Im talking about. The first person to give me a solution I will "donate" $50 to them..
I believe you might have to use (PC) Qpst or CDMA workshop to get it to stick.
Sent from my SPH-L710 using Tapatalk 2
QPST, no matter what version, always freezes up at like 41% and says some error.. I know someone has come across this issue with the gs3.
Sent from my Sprint Galaxy S3 SPH-L710 on MetroPCS using Wicked Sensations 5.0 ROM.
I still have no clue to what's causing your issue, but i will at least help bump the thread back up to where somebody else may be able to help you out.
@dazednconfused I'm still using your ROM and do not wanna change. Still havin the "##DATA# Issues", now my other issue is that damn KitKat update it keeps askin me to do.
Sent from my Sprint Galaxy S3 SPH-L710 on MetroPCS using Wicked Sensations 5.0 ROM.
Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)
I bought a Sprint Galaxy Note 2 SPH-L900 not too long ago on Craigslist. Guy told me it worked with Sprint but he apparently flashed it to something that used Verizon PRLs (from what i've been told probably Page Plus). I recently tried to use Ringplus/Sprint with this phone but couldn't use it due to the PRL problem. When I try to make a call a robo Verizon operator pops up and I can't make calls. Of course, I can't get in contact with the guy that sold me the phone so im hoping you guys can help me get it to work with Sprint.
The MSL number has been changed to all zeros. And the dial code ##72786# shows "SCRTN" at the very top then just restarts my phone.
So I rooted the phone using this simple process. [SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
Then I downloaded SuperSU. Then tried DFS to change my MSL number back to the original number. But it didn't work. I tried PRL Helper, but that too did not work. Won't let me reset the PRL. So I unrooted my phone (or so I thought) and reset the phone to factory to see if that would work, and it did not. So I reinstalled the CF-Auto-Root and now even SuperSU won't work. Im new to all this rooting stuff. THIS IS FRUSTRATING!
My phone is running stock rom. Android version 4.4.2 Baseband version L900VPUCOH3. Build number KOT49H.L900VPUCOH3.
PLEASE HELP!
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900 using XDA-Developers mobile app
Chunli'sThighs said:
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Click to expand...
Click to collapse
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900 using XDA-Developers mobile app
skryte said:
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
beansnorice said:
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
How would I clone another phone? And in order to do this right, would I have to clone another SPH-L900?
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
Why boost allows most non prepaid sprint phones on are allowed on boost? http://www.prepaidphonenews.com/2015/06/list-of-sprint-phones-allowed-on-boost.html?m=1
Sent from my SPH-L900 using XDA-Developers mobile app
---------- Post added at 01:11 AM ---------- Previous post was at 01:10 AM ----------
Chunli'sThighs said:
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
Click to expand...
Click to collapse
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for the late response and thanks for the reply but I was trying to go to RingPlus not PagePlus.
Problem Solved!
Forgot to update. I fixed this problem.
How I FIXED Ringplus PRL problem (flashing to stock rom may or may not be necessary)
I fixed the problem by rooting my Galaxy Note 2 SPH-L900 with odin here.
[SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
The reverted to 4.2 Kit Kat stock rom using "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" file.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Then I downloaded the "25xxx = residential acct - lte/800smr" PRL files from
http://*******************eestat.ir/?index=forum.xda-developers.com/showthread.php?t=1880781 (Add '?http://?xda-d?evelopers.freestat' to the beginning of link without the '?' marks.)
and extracting the "25XXX_LEG" folder then using the "25016.prl" file to desktop then using CDMA Workshop 2.7 to change the prl to the 25016 prl file.
Then I used trial version of DFS 16.2.21.0 to change my HEX and DEC and esn numbers to match what was on originally on the phone (I found this out through either Ringplus or going into phone dial code). It was a little difficult to change them because DFS kept saying it was skipping the request but after a little while even though it said it didn't change anything it did change it back to the original. That allowed my phone to be read by Ringplus and I was able to get the phone activated and PRLs updated automatically.