Develop Bugs

[Q] flash to verizon prepaid

i am curently using verizon prepain services right now but the phones available suck. i have an htc evo 4g that i was using on sprint. what im wondering is if i can flash it to work with verizon prepaid and if so how. now i know there is a post in development but cause im new i cant view it. if someone could help me id be eternally greatful.

I'm in the process of fully flashing my evo to alltel. It's currently activated and data was working for a few hours but has stopped. I can help you get to where I am now.
Use CDMA workshop to get your SPC code.
Plug in your phone using USB cable.
Select "charge only".
Enable "USB debugging" (applications->development).
Dial ##3424# for DM command service.
Download HTC DIAG drivers.
If they don't install automatically, mine didn't, go to devices and printers, find your android device with the exclamation mark. (properties, hardware, properties, driver, update driver, browse my computer..., let me pick..., have disk, browse for your DIAG driver).
Download CDMA workshop and find which port your evo is on. Connect. Go to "Security" tab. Read SPC. Click "write". (You can either remember this code or set it to 000000.)
You're done with CDMA workshop. Exit diag mode on your evo.
EPST
Dial ##3282#. Select edit mode. Use whichever code you decided on in CDMA workshop, either 000000 or the code it was originally set to.
This is where you'll input your Verizon settings.
I'm still working on the Alltel ones. Maybe someone here has advice on how to proceed. Hope this helps.

Where are you stuck at? I have 2 evo 3'ds here and I know how to do it all besides repairing it for verizon. I can do everything else besides that step. Never done a evo (repair)and cant find the answers I need. Almost to the point of buying dfs evolution! LOL

I had a full guide to Flash Evo's to Verizon prepaid but the Admins took it down, right now I have an Evo, Evo 3d, Epic and even a Thunderbolt flashed to VzwPP.
All have full 3G unlimited data along with unlimited voice text and MMS for $50 a month.
Thunderbolt was very hard but the rest was a snap, if you need modded PRL's or anything just give me a shout.

NewTalk said:
I had a full guide to Flash Evo's to Verizon prepaid but the Admins took it down, right now I have an Evo, Evo 3d, Epic and even a Thunderbolt flashed to VzwPP.
All have full 3G unlimited data along with unlimited voice text and MMS for $50 a month.
Thunderbolt was very hard but the rest was a snap, if you need modded PRL's or anything just give me a shout.
Click to expand...
Click to collapse
If you could help point me in the right direction for a guide. I have 2 verizon prepaid phones i Want to switch to evo 4g's Do they need a new ROM? anything extra I need for 3g to work and so on? My email is [email protected] if you don't mind sending me a copy of your old guide if you have it still I would greatly appreciate it.

I'm actually looking for a guide to flash a friend's Evo, too. PM me if you have the guide? Would be muchhhhh appreciated.

sprint epic 4g touch
I would BE greatly appreciated IF YOU COULD PM ME THE INSTRUCTIONS FOR THE SPRINT EPIC 4G ON PREPAY VER.
[email protected]

can send me the guide also thanxs dude! heres my email address ([email protected]) and if you need something from me let me no!!!

NewTalk said:
I had a full guide to Flash Evo's to Verizon prepaid but the Admins took it down, right now I have an Evo, Evo 3d, Epic and even a Thunderbolt flashed to VzwPP.
All have full 3G unlimited data along with unlimited voice text and MMS for $50 a month.
Thunderbolt was very hard but the rest was a snap, if you need modded PRL's or anything just give me a shout.
Click to expand...
Click to collapse
Had my epic 4g touch flashed to verizon prepay and it was always on roam so i did ota program and that messed up some settings, so i found a custom prl and put that on the phone and it doesn't say roaming anymore, But i lost my mms and the phone says sprint on home screen. NEED HELP I AM A NOOB TRYING TO LEARN. THANKS FOR ANY HELP.

If you don't mind could i also get the guide. I have and Galaxy S2 epic touch in need of a flash to verizon prepaid. my email is [email protected] Thanks!!

flashing help
I have a e4gt that was flashed to verpp. everything works but the data is very slow. Talked to the guy who flashed it and he said it was a problem with the e4gt. Can the phone be reflashed to fix the data speed?
Any help you could give would be appreciated. You can contact me at [email protected]
Btw I had a facinate on the same plan that worked great.

add me to that list please!!!

please send me the guide as well, would like to get my e4gt converted over. Would flashing the phone work on a normal VZW plan or does it have to be PP? tnowakow at netzero.net Thank you!!

sorry forgot to add my email. Plz send me the Guide too!!!!
[email protected]

I also wish to receive the guide. I past it up the first time you posted it, Now Im seein Verizon on the Evo I might just keep the old phone and switch to new carrier . also the prls... [email protected]
And the guy who has had all the success flashing to verizon can you also send me a guide on how you got everything working thanks

same boat
Please please the guide as well my email is [email protected] thanks this is well .appreciated

Hi I have Samsung epic 4g touch ,and I will like to flash it to Verizon PP please send me the guide to [email protected] you soo much.

[email protected] add me, i need this tutorial evo 4g

Evo 4g flash
Can you send me the guide as well my address is [email protected] thanks

Evo 3d Flash
Could you send me a guide to [email protected]

Galaxy SIII Flashed 2 Boost Mobile

All his Big Brothers have been taken down ......... Epic 4G, EVO 4G, EVO Shift, EVO 3D, Epic 4G Touch, Nexus S. and even some VZN Phones have all been Flashed over to Boost Mobile, will the Almightily Heavy weight champion of the Smartphone WORLD be a challenge?? I'm planning to take him down (KTFO) as soon as I receive it in my Lake of the Woods next week. But if you take him down first tell us about it............Happy Flashing

I am also waiting for mine to try and flash.
Does anyone one know if verizon gs3 also uses qualcom chipset?
Sent from my SPH-D710 using xda premium

i got mine today yey!! i flash it to my verizon prepaid account i also have the evo lte and the s3 feels alot faster and for some reason internet speeds are faster to... in advance qpst doesnt read it i tried avery version so your gonna need workshop for sure :good:

trezegol said:
i got mine today yey!! i flash it to my verizon prepaid account i also have the evo lte and the s3 feels alot faster and for some reason internet speeds are faster to... in advance qpst doesnt read it i tried avery version so your gonna need workshop for sure :good:
Click to expand...
Click to collapse
CAn you give us a step by step? I have always flashed Samsung's phones/pads with qpst. How do you go about doing the CDMA workshop? thanks

I might get a GS3 from sprint.... but im gonna try and flash it to pageplus cellular since here at work they dont let me flash sprint phone to boostmobile

Hey try DFS, that software is a beast it has read almost every phone for me. I don't have my S3 yet so I can't confirm it to work but i believe in it.
ranchosteve said:
I am also waiting for mine to try and flash.
Does anyone one know if verizon gs3 also uses qualcom chipset?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse

ghanafirst said:
Hey try DFS, that software is a beast it has read almost every phone for me. I don't have my S3 yet so I can't confirm it to work but i believe in it.
Click to expand...
Click to collapse
Has anyone be crack the sg3 yet? I want get my on boost?????

Unfortunately not.. I have a boost and sprint account I have an epic on boost and I have me s3 on Sprint... I haven't really tried yet but might give it a try this weekend, I know it reads with dfs and workshop just haven't tried anything yet, but this is one bad a** phone!

kevo3000 said:
Unfortunately not.. I have a boost and sprint account I have an epic on boost and I have me s3 on Sprint... I haven't really tried yet but might give it a try this weekend, I know it reads with dfs and workshop just haven't tried anything yet, but this is one bad a** phone!
Click to expand...
Click to collapse
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.

My Friend already flashes hes Sprint Galaxy S3 to Boostmobile with 3G data and mms working....

Nice I'm thinking about getting a s3 from best buy and paying full price and getting a warranty and flash to boost
Sent from my SPH-M930BST using xda app-developers app

AlpineMan said:
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.
Click to expand...
Click to collapse
Have you tried qpst 2.7.374?

kevo3000 said:
Have you tried qpst 2.7.374?
Click to expand...
Click to collapse
You have to use DFS tool

kevo3000 said:
Have you tried qpst 2.7.374?
Click to expand...
Click to collapse
I got a hold of QPST 2.7 build 378. This version is able to read more info from the Galaxy S3 than build 366. I'm able to launch EFS Explorer and see most (if not all) the NV Items. I'm not able to use Service Programming however. As soon as I enter the MSL, I get an error message saying "Roaming list receive failed". It looks like the latest build is 385. I'm wondering perhaps this build will be able to fully read/write the GS3. If anyone has a link to QPST 2.7 build 385, please share.
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
JUSMEJOSE said:
You have to use DFS tool
Click to expand...
Click to collapse
Do you think you and/or your friend can share with us how you guys did it using DFS? Thanks.

Ill tell him how if he can do a guide or something....

I flashed to Sero.
I used qxdm 3.12.714, which connected fine. I tried QPST.2.7.374 and was not able to connect to phone. "PRL error". CDWS connects but some features don't work, but its enough to get the phone programmed and 3g.
.

ranchosteve said:
I used qxdm 3.12.714, which connected fine. I tried QPST.2.7.374 and was not able to connect to phone. "PRL error". CDWS connects but some features don't work, but its enough to get the phone programmed and 3g.
.
Click to expand...
Click to collapse
Do you mind sharing that version of Qxdm been looking for that one! Thanks..
---------- Post added at 03:50 PM ---------- Previous post was at 03:41 PM ----------
AlpineMan said:
I got a hold of QPST 2.7 build 378. This version is able to read more info from the Galaxy S3 than build 366. I'm able to launch EFS Explorer and see most (if not all) the NV Items. I'm not able to use Service Programming however. As soon as I enter the MSL, I get an error message saying "Roaming list receive failed". It looks like the latest build is 385. I'm wondering perhaps this build will be able to fully read/write the GS3. If anyone has a link to QPST 2.7 build 385, please share.
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
Do you think you and/or your friend can share with us how you guys did it using DFS? Thanks.
Click to expand...
Click to collapse
I second this, Also is that qpst 2.7.385 the latest one, I'm surprised that cdws hasn't updated its software to not need these other ones like Dfs.

kevo3000 said:
Do you mind sharing that version of Qxdm been looking for that one! Thanks..
---------- Post added at 03:50 PM ---------- Previous post was at 03:41 PM ----------
I second this, Also is that qpst 2.7.385 the latest one, I'm surprised that cdws hasn't updated its software to not need these other ones like Dfs.
Click to expand...
Click to collapse
QXDM v3.12.714 : http://hotfile.com/dl/114670632/36a0d73/QXDM_3.12.714_winxp.rar
Anyone have QPST 2.7 build 385?

AlpineMan said:
I'm also interested in the method. I'm assuming the same method to Boost will also work to move the Sprint Galaxy SIII to a Sprint legacy plan like SERO. What I've found out so far:
1) QPST v2.7 Build 366 doesn't work on the Sprint GS3 except to add the diag comm port so that QXDM can see the port. You will not be able to use QPST to manipulate Profile 0 and Profile 1 to enable 3G.
2) QXDM v3.11.36 can be used for the repair. This will get you voice, SMS, 1xRTT data working.
3) To fix Profile 0 and Profile 1 to enable 3G, CDMA Tools DFS v4.0.0.3 looks to be very promising. Don't know what fields to fill out though.
I've seen ads in craigslist selling flashing services for the Galaxy S3 for use w/ Boost, so someone has already figured this out. Hopefully it won't be long before someone documents all the steps.
Click to expand...
Click to collapse
In DFS the fields to fill out for Profile 0 and Profile 1 are under Programming >>>Mobile. IP

Yes, I figured that before posting. It however is still operating at 1xRTT. So there must be something else I'm missing that needs to be changed in DFS.
Sent from my SPH-D710 using Xparent ICS Blue Tapatalk 2

[Q] Help Getting Data working on MetroPcs Flashed Note 2

I purchased a sprint galaxy note II that had aleady been flashed to metropcs for a good deal. I was able to get it activated for metropcs and currently have voice and mms functioning correctly. I have run into a dead end in trying to get the data to work for the phone. I have used the Galaxy Note2 toolkit. I am new to Odin and Clockwork Mod in general so this is becoming a bit tedious for me. I flashed the synergy Rom yesterday in a feable attempt to get my "data" back on track but now i realize I need help and guidance from the experts of the forum. Any guidance to point me in the right direction would be appreciated- for example- do I need to flash a radio, kernel, etc?... I hope I don't come off as a complete idiot considering I have spent hours on getting this thing Rooted- I really don't know what to do now. Thanks for the help.

Search for my guide on the galaxy s3 forum here. It worked for the evo 4g, evo 3d and galaxy s3, it should work on the note 2.
You wont get data without the proper provisioning. On these phones that requires using dfs or cdma tools. On htc phones it can be done with qpst.
Do the provisioning part of the guide and that should work.
Sent from my SPH-L900 using xda premium

Max_Pain said:
Search for my guide on the galaxy s3 forum here. It worked for the evo 4g, evo 3d and galaxy s3, it should work on the note 2.
You wont get data without the proper provisioning. On these phones that requires using dfs or cdma tools. On htc phones it can be done with qpst.
Do the provisioning part of the guide and that should work.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Thanks Max, I figured the S3 would be a good place to start. I will work on it today.

Ok- Started the work on this today and wanted to give an update and where I am stuck. I am at BloodyKiller 86's section of the provisioning. I'm on windows 8- I installed the Diag drivers and can now see in my device manager a tab under modems that lists "Samsung Mobile USB Modem." In checking the properties it shows Com 3. On my Galaxy Note 2 when I do ##3424# it pulls up a PhoneUtil screen(UART)- I can either select CMDA Modem or PDA and then below that there is a Qualcom USB SETTING tab that gives me the following options: (mtp), (mtp+adb), (ptp), (ptp +adb), (RMNET+DM+Modem), and (DM+Modem+ADB). I am now stuck with using CDMA Workshop. I downloaded the demo version and am not sure if this is the reason i am getting stuck. I have chosen COM 3(shows in the properties of the Samsung Modem) and can connect to it successfully but when i attempt to Read Device in DM mode it gives me the "Failed...Device does not answer." I have tried choosing the different options above and connecting but to no avail. I am hoping you may have some advice for me. I appreciate all your hard work and will continue to work on this until I get this Note 2 working with Data.

mms help?
hi how can you get the mms working on Note 2 from verizon working on metropcs, i am not rooted but do have data working.
---------- Post added at 01:44 PM ---------- Previous post was at 01:40 PM ----------
i have Verizon Samsung Galaxy Note 2 i would like to know if i can switch my phone which is flashed to metropcs can be switch back to verizon 4g lte service. is there a guide to help you fix all setting from metropcs to verizon

Me too need help
Sent from my SPH-L900 using xda app-developers app

4G not working....3G is working
Can I get the link to your thread on the Galaxy S3 problem for data?

Guide to Flash to Straight talk using cdma

I have hacked several phones thanks to the help of this group so I wanted to return the favor. I spent about 6 hours doing this and have success (phone, text, and 3g web even using OTA programming with no MEID cloning.).
The first thing you need is to make sure your phone is stock. If your phone is modded get the stock rom from here
http://vivow.pcharpoon.com/roms.html#stock
I have tested this on a rooted phone using the GB rom above. With the latest radio from here
http://vivow.pcharpoon.com/radios.html
Next follow what shef692003 says about using CDMA workshop.
http://forum.xda-developers.com/showthread.php?t=1067036&highlight=spc&page=4
Make sure to get your drivers downloaded first. You will have to hunt for cdma workshop yourself.
We need to change the spc code to 000000 you can also change the NAM number to your phone number but this doesn't seem to effect anything. after rebooting your phone dial the straight talk OTA program number *22890.
I will update after testing with AOPK 4.2 rom later. Thank all you guys for the help you have given.

Update after replacing stock rom with jelly bean AOKP
After running all day on AOKP using straight talk and all is well. Cell coverage is the same if not a little better than my wife's stock straight talk phone. Data was 3g and all the phone's features have worked "out of box" so to speak. I hope this helps someone else if they want to flash their Dinc 2 over to straight talk.

_Skare_krow said:
After running all day on AOKP using straight talk and all is well. Cell coverage is the same if not a little better than my wife's stock straight talk phone. Data was 3g and all the phone's features have worked "out of box" so to speak. I hope this helps someone else if they want to flash their Dinc 2 over to straight talk.
Click to expand...
Click to collapse
Thanks for the info.
I was wondering, what are the APN settings you are using to achieve 3g?
EDIT: Also, when I try to call *22809 it tells me "we are unable to program your phone"
Best,
Andrew

hawk1220 said:
Thanks for the info.
I was wondering, what are the APN settings you are using to achieve 3g?
EDIT: Also, when I try to call *22809 it tells me "we are unable to program your phone"
Best,
Andrew
Click to expand...
Click to collapse
Sorry it took so long to get a reply back. My kid fell through some sheet rock and broke his arm so I've been busier than usual.
Are you using the stock rom from Verizon?
I didn't touch the APN settings the only other thing I did was to change the NAM value to my phone number. After doing those two things I was able to complete OTA programming. I had also updated the radio but I think that was after I had finished the OTA programming. I'll check my APN settings when I get a chance, but those where "stock" so to speak.

I want to do this for my brother, he is currently on Verizon. I am assuming that he has to disconnect service from Verizon first then activate Straight Talk?
Sent from my SPH-L710 using xda app-developers app

_Skare_krow said:
I have hacked several phones thanks to the help of this group so I wanted to return the favor. I spent about 6 hours doing this and have success (phone, text, and 3g web even using OTA programming with no MEID cloning.).
The first thing you need is to make sure your phone is stock. If your phone is modded get the stock rom from here
http://vivow.pcharpoon.com/roms.html#stock
I have tested this on a rooted phone using the GB rom above. With the latest radio from here
http://vivow.pcharpoon.com/radios.html
Next follow what shef692003 says about using CDMA workshop.
http://forum.xda-developers.com/showthread.php?t=1067036&highlight=spc&page=4
Make sure to get your drivers downloaded first. You will have to hunt for cdma workshop yourself.
We need to change the spc code to 000000 you can also change the NAM number to your phone number but this doesn't seem to effect anything. after rebooting your phone dial the straight talk OTA program number *22890.
I will update after testing with AOPK 4.2 rom later. Thank all you guys for the help you have given.
Click to expand...
Click to collapse
HI THERE!! IS THIS REALLY ALL I HAVE TO DO TO FLASH MY SPRINT HTC EVO 4G TO STRAIGHT TALK?? HAS ANYONE TRIED THIS?DOES IT WORK?I DO NOT MEAN ANY DISRESPECT BUT IT LOOKS SO SIMPLE...THAT I AM SCARED TO TRY IT.(SORRY FOR THE ALL CAPS MESSAGE,MY KEYBOARD IS ACTING UP) PLEASE LET ME KNOW:good:
---------- Post added at 12:27 PM ---------- Previous post was at 11:56 AM ----------
_Skare_krow said:
I have hacked several phones thanks to the help of this group so I wanted to return the favor. I spent about 6 hours doing this and have success (phone, text, and 3g web even using OTA programming with no MEID cloning.).
The first thing you need is to make sure your phone is stock. If your phone is modded get the stock rom from here
http://vivow.pcharpoon.com/roms.html#stock
I have tested this on a rooted phone using the GB rom above. With the latest radio from here
http://vivow.pcharpoon.com/radios.html
Next follow what shef692003 says about using CDMA workshop.
http://forum.xda-developers.com/showthread.php?t=1067036&highlight=spc&page=4
Make sure to get your drivers downloaded first. You will have to hunt for cdma workshop yourself.
We need to change the spc code to 000000 you can also change the NAM number to your phone number but this doesn't seem to effect anything. after rebooting your phone dial the straight talk OTA program number *22890.
I will update after testing with AOPK 4.2 rom later. Thank all you guys for the help you have given.
Click to expand...
Click to collapse
Will this work for a sprint HTC evo 4G as well?

this is no longer needed.. you can bring your dinc2 to straight talk without doing any flashing.. it's their byop plan.

johneightyone said:
this is no longer needed.. you can bring your dinc2 to straight talk without doing any flashing.. it's their byop plan.
Click to expand...
Click to collapse
Not True. You can bring SOME CDMA phone to ST but the incredible 2 is NOT one of them! If you try to activate it using their BYOP program they will take you MEID and after 10 or so minutes tell you that the phone is not compatible with their system. I know I tried. The reason I bought my incredible 2 was for the BYOP program.

Sorry for not replying
I never got an email showing their was a request for info on this thread. This method won't work for sprint phones ,I think, because it uses verizon CDMA settings. It does work as this is how I got my phone on the ST network.

Saithies said:
Not True. You can bring SOME CDMA phone to ST but the incredible 2 is NOT one of them! If you try to activate it using their BYOP program they will take you MEID and after 10 or so minutes tell you that the phone is not compatible with their system. I know I tried. The reason I bought my incredible 2 was for the BYOP program.
Click to expand...
Click to collapse
thats not true i activated one on straight talk

I don't see any reason why you could not use the Dinc2 on BYOP for straight talk.

will this work for the droid 4??? i tried to switch my old droid 2 with the d4 using the same number with page plus and they said they dont do 4g lte phones..

How did you get the Incredible 2 onto Straight Talk?
Mrhunter13 said:
thats not true i activated one on straight talk
Click to expand...
Click to collapse
Can you pleawe share with me how you did it? I have a stock Incredible 2 that I am trying to get working on Straight Talk CDMA and I sure hope I don't have to go the trouble of flashing it!

Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)

Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)
I bought a Sprint Galaxy Note 2 SPH-L900 not too long ago on Craigslist. Guy told me it worked with Sprint but he apparently flashed it to something that used Verizon PRLs (from what i've been told probably Page Plus). I recently tried to use Ringplus/Sprint with this phone but couldn't use it due to the PRL problem. When I try to make a call a robo Verizon operator pops up and I can't make calls. Of course, I can't get in contact with the guy that sold me the phone so im hoping you guys can help me get it to work with Sprint.
The MSL number has been changed to all zeros. And the dial code ##72786# shows "SCRTN" at the very top then just restarts my phone.
So I rooted the phone using this simple process. [SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
Then I downloaded SuperSU. Then tried DFS to change my MSL number back to the original number. But it didn't work. I tried PRL Helper, but that too did not work. Won't let me reset the PRL. So I unrooted my phone (or so I thought) and reset the phone to factory to see if that would work, and it did not. So I reinstalled the CF-Auto-Root and now even SuperSU won't work. Im new to all this rooting stuff. THIS IS FRUSTRATING!
My phone is running stock rom. Android version 4.4.2 Baseband version L900VPUCOH3. Build number KOT49H.L900VPUCOH3.
PLEASE HELP!

I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...

Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900 using XDA-Developers mobile app

Chunli'sThighs said:
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Click to expand...
Click to collapse
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900 using XDA-Developers mobile app

skryte said:
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
beansnorice said:
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?

I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi

skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
How would I clone another phone? And in order to do this right, would I have to clone another SPH-L900?

skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
Why boost allows most non prepaid sprint phones on are allowed on boost? http://www.prepaidphonenews.com/2015/06/list-of-sprint-phones-allowed-on-boost.html?m=1
Sent from my SPH-L900 using XDA-Developers mobile app
---------- Post added at 01:11 AM ---------- Previous post was at 01:10 AM ----------
Chunli'sThighs said:
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
Click to expand...
Click to collapse
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for the late response and thanks for the reply but I was trying to go to RingPlus not PagePlus.

Problem Solved!
Forgot to update. I fixed this problem.
How I FIXED Ringplus PRL problem (flashing to stock rom may or may not be necessary)
I fixed the problem by rooting my Galaxy Note 2 SPH-L900 with odin here.
[SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
The reverted to 4.2 Kit Kat stock rom using "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" file.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Then I downloaded the "25xxx = residential acct - lte/800smr" PRL files from
http://*******************eestat.ir/?index=forum.xda-developers.com/showthread.php?t=1880781 (Add '?http://?xda-d?evelopers.freestat' to the beginning of link without the '?' marks.)
and extracting the "25XXX_LEG" folder then using the "25016.prl" file to desktop then using CDMA Workshop 2.7 to change the prl to the 25016 prl file.
Then I used trial version of DFS 16.2.21.0 to change my HEX and DEC and esn numbers to match what was on originally on the phone (I found this out through either Ringplus or going into phone dial code). It was a little difficult to change them because DFS kept saying it was skipping the request but after a little while even though it said it didn't change anything it did change it back to the original. That allowed my phone to be read by Ringplus and I was able to get the phone activated and PRLs updated automatically.