Develop Bugs

Best cpu manager app?

What is the best cpu manager app, to use governor, modified frecuency and that things?
Sorry for my english

i use setCPU to change my cpu settings

I use setCPU too.Work perfectly

Well,It Depends...!
Well,there are lots of cpu manager apps in market but if you ask me which is the best then let me know :
What's your current rom?
Is your device rooted?

Set CPU! !!!
Wrong section btw

I use antutu CPU master for CPU profiles uses less memory
™®© °_° *-*show off is immature *-*
°_° ™®©

I use set CPU
Sent from my GT-S5830

peter_dizai said:
Well,there are lots of cpu manager apps in market but if you ask me which is the best then let me know :
What's your current rom?
Is your device rooted?
Click to expand...
Click to collapse
I stay using ComfortStock v2[ICS], but I will change this for LegendStock Rom v3 this night
Yes, is rooted.
thx for response =)

XDemianX said:
What is the best cpu manager app, to use governor, modified frecuency and that things?
Sorry for my english
Click to expand...
Click to collapse
SetCPU ftw. Peep the link on my signature to get some info on it ;D

set CPU is the best

Market search cpu.
Sent from my GT-S5830 using XDA

NoFrills best for Noobie.... Coz its easyy!
I personally use Set Cpu..
Sent from my GT-S5830 using xda premium

Set CPU, smartassV2

Set CPU
Lagfree, 864Mhz
...... Super smooth!!!
Sent from my GT-S5830 using xda premium

Set that cpu 2 tha max

SetCPU is my personal favourite.
Sent from my GT-I9003 using xda premium

pvrx said:
Set CPU
Lagfree, 864Mhz
...... Super smooth!!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
And the battery a crap xD
I use SetCPU, smartassv2
Sent from my SG Ace

Battery is made to USE.... not save...
I like performance, n I pay at the cost of battery!
My battery lasts for max 18Hrs.... That is enough for me!
Sent from my GT-S5830 using xda premium

ANDROIDCUSTOMIZe said:
Set that cpu 2 tha max
Click to expand...
Click to collapse
My CPU goes 921Mhz.... Max
Gets boot on 940Mhz!!
And freezes on 1.036 Mhz... Lol
Sent from my GT-S5830 using xda premium

SetCPU ftw!

[Kernel][JB/ICS/AOSP][Linaro] Covenant Kernel RC3-Voice Fix {OC/UV} 1.4 ghz {12-1-12}

Covenant Kernel RC3​
This is an all new kernel for AOSP(JB or ICS) roms built from source.
I have decided to take over building an all new kernel for CM10 and other AOSP roms to reduce the work load from the greatergood.
But make no mistake about it, thegreatergood helped tremendously in getting me where i am on overclocking and voltage control.
So smack his thanks button as much as possible.
The covenant kernel is the first of many new releases from my newly formed team, The Covenant. Memebers consisting of- "thegreatergood",
"Bo0st", "terinfire", and myself. We are still recruiting members who can contribute in there own skilled way. So if you think you would like to, and can contribute to the Covenant team hit me or one of the other team members up.
Features
OC/UV up to 1400 mhz
OC Range; 1400, 1200, 1100, 1000, 912, 816, 760, 608, 456, 312, 216
GOVERNORS:
SmartassV2
Interactive
Conservative
Ondemand
Powersave
Userspace
Performance
I/O Schedulers:
Noop
Deadline
Cfq
sio(default)
Click to expand...
Click to collapse
Credits
Thegreatergood
terinfire
roothorick(Camera)
Bo0st
DrMario
dbrannon
Raw0w0
And the XDA and glide community!
Click to expand...
Click to collapse
Pac-man users flash last kernel to fix camera
Click to expand...
Click to collapse
Covenant-kernel-V3 Changelog
Camera Fix
Click to expand...
Click to collapse
Covenant-Kernel-V2 Changelog
Removed deadline and cfq I/O schedulers
Fix Microphone and voice search Cm10
OC 1400, 1300, 1200, 1000, 912, 816, 760, 608, 456, 312, 216
Click to expand...
Click to collapse
Downloads

Mine!
Sent from my SGH-I927 using xda premium

Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..

VinayS said:
Boots up well..
No Boot animation..
slightly longer boot time..(Or feels like, as its only Samsung from start to end)
wipes up cache during flash..
Usually not seen it while installing any kernel..takes a lot of time to rebuild..
Can you remove it.. ?
will OC and post benchmark results later..
Click to expand...
Click to collapse
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium

dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Is compatible with lite rom? or only is for CM10?

lorddavid said:
Is compatible with lite rom? or only is for CM10?
Click to expand...
Click to collapse
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium

dman3285 said:
As the title says.. AOSP.. only for CM10, CM9, AOCP, AOKP, PAC-man, ect, ect... ONLY AOSP roms
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
aaa ok, thanks

dman3285 said:
Um yes.. boot animation runs.. this only works on CM10.. I tested it 25 times. Booted up in seconds and boot animation ran every time. This will not work on stock ICS based ROMs.
Click to expand...
Click to collapse
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..

VinayS said:
oh, Time to change back..i am on stock ICS..
In Stock ICS,
Not able to pass lockscreen from second boot onwards..
phone gets struck and hangs.. also does not charge..
Click to expand...
Click to collapse
That's because this is Only for AOSP ROMs.. clearly stated in title and OP..
Sent from my SGH-I927 using xda premium

so this really a teaser for upcoming update to the cm10/10.1 and aosp roms

What do you mean by "wakelock enabled" in the op?
Sent from my SAMSUNG-SGH-I727 using xda premium

If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium

Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?

dbrannon79 said:
Just a quick question! overclocked to 1400mhz? is that safe? I was having trouble with litekernel clocked to 1.28!! and heat issues while running google maps. and how does that affect the battery life?
Click to expand...
Click to collapse
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium

dman3285 said:
Its completely stable.. been running it at 1400 with smartassV2 and has been flawless .. not even gotten warm...
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I wish I could use it in Ice Pop rom too! But it's a modified stock rom!
Sent from my SGH-I927 using Tapatalk 2

This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium

dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Do you mean these wakelocks? If yes, I doubt that there is any Android release having such an option. If you disable wakelocks, almost nothing will work on the system.

dman3285 said:
If I need to explain it you don't need to flash it.
Means you can enable wake lock in settings if supported..
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I am not a noob at this I've been flashing roms for a long time and I've never seen the tweak wake lock enabled and I've only seen wake lock referred to as apps or other things keeping your phone awake and killing battery
I'm not trying to be rude i was just curious
Sent from my SAMSUNG-SGH-I727 using xda premium

dman3285 said:
This was just a quick run on quadrant OC at 1400, UV at 750
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Looks awesome! Is that 750mv at 1400Mhz? I cannot imagine that would be possible, the lowest voltage at the highest frequency. If it is, then the covenant really does work miracles!
Sent from my SGH-I927 using xda app-developers app

What are you using to oc? I am using antutu but can't seem to find 750 Anywhere
Sent from my SGH-I927 using xda app-developers app

Best gaming kernel for Jelly Bean?

I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app

Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium

Thnks!
ipromeh said:
Our android development have JB maxmem kernel I think maxmem is most suitable for gaming
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I flashed the PRIVATE kernel and when i play temple run, it freezes and gave me a pop sound... I can't do anything so i pulled out the battery and restart... So i'm going to flash the MAXMEM kernel!

TiTAN-O-One said:
I flashed CM10 a3 with for vivos kernel and 3D performance is really bad... Last time with xperiaICE v3.1, I got 2235 in quadrant 3D test with CWG kernel (i think)
So are there any kernel for gaming?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.

You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app

Both
Sent from my GT-I8150 using xda premium

TiTAN-O-One said:
You mean stock kernel on CM10? Or what?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.

Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium

ipromeh said:
Why performance? Yr device may be very very hot
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
In JB its slightly better. Using ondemand is not quite good though. At the very least use interactive.

KiD3991 said:
Stock kernel on CM10. When you wish to game simply overclock min frequency to 768 and max to 1401 and set governor to performance.
Click to expand...
Click to collapse
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.

pepoluan said:
Be careful... the performance governor basically runs your CPU at MaxFreq all the time.
Except during Deep Sleeps.
Click to expand...
Click to collapse
Heh Due to personal reasons I rarely exceed 15-20 minutes gaming time. And I have a handy switch between my battery friendly profile and this gaming one.

KiD3991 said:
Actually though, use stock.
+ Seeders
+ KSM
+ Disable CPU rendering.
Click to expand...
Click to collapse
What's KSM

imadiu said:
What's KSM
Click to expand...
Click to collapse
Kernel Samepage Merging... you can find it under the settings/performance/memory management
Sent from my GT-I8150 using xda app-developers app

Thnks!
I tried all and it seems ok... Now, just an experiment, i'm going to try PAC MAN JB ROM... Just to see if there are any perfomance difference...

I am using cm10 alpha 3 with forvivo v2 maxmem kernel.
subway surfers lags in my phone.
how can i disable CPU rendering ?

CPU rendering? What I know is Force GPU rendering and in order to disable that just go settings and under the Developer Option, scroll down till you see a check box and Force GPU Rendering then untick it... I thought its not ticked by default?
Sent from my GT-I8150 using xda app-developers app

Disable CPU rendering is a flashable file found in Android Developments. Its quite old but gold. Enable KSM at memory settings under Performance. Also enable 16bit transparency but disable surface dithering.

http://forum.xda-developers.com/showthread.php?t=1932047
Here you go, this is the thread.
Sent from my GT-I8150 using xda app-developers app

My galaxy nexus becomes too warm..

Hi..my galaxy nexus becomes tooo warm when using it for about 10-15 mins..
I m using purity 4.4 & kernel ak purity v021.. Is it the kernel issue or anything else because it is the first time i have installed a custum kernal...
Kindly help plzzz..
Sent from my Galaxy Nexus using xda app-developers app

Maybe, mine does that occasionally from time to time. But I'm stock everything

Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app

l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanx for the reply...i will change to Dummy kernal and try...

l.Urker said:
Using same setup as you except on Fancy Kernel but when I was previously on Dummy kernel (same Dev) the phone ran very cool. I think you could try flashing Dummy Kernel and using Trickster Mod app to lower GPU clock to 304mhz and min CPU clock to 100+MHz?
edit: or change the governor as for me some governors cause my phone to run at my max clock speed non stop
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hey..i changed to dummy kernel and it works fine now. No heating up.
Thanks a lot..:good:

What is TWEAK??

Hey all can anyone tell me what is tweak? Means?
And i'm on cm11 am i need it?
And how to do it if?
Sent from my GT-I9082 using XDA Premium 4 mobile app

Showman2020 said:
Hey all can anyone tell me what is tweak? Means?
And i'm on cm11 am i need it?
And how to do it if?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tweak is of optimization. Tweak can means Overclock, Debloat, RAM optimization, etc
On cm11 tweak (Overclock) is optional because not everyone need high-speed CPU. but Ram optimization in needed by me.

black87 said:
Tweak is of optimization. Tweak can means Overclock, Debloat, RAM optimization, etc
On cm11 tweak (Overclock) is optional because not everyone need high-speed CPU. but Ram optimization in needed by me.
Click to expand...
Click to collapse
Thanks so much
So it's good to make it?
How can i make it for my grand cm11
Sent from my GT-I9082 using XDA Premium 4 mobile app

Showman2020 said:
Thanks so much
So it's good to make it?
How can i make it for my grand cm11
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For overclock just flash one of the kernel availabe for CM11 (k2wl's Evolution kernel or xenon92's Nebula kernel)
then press the build number in "about phone" 7-10 times (im forgot). The performance setting will appear in settings menu (not "about phone"). Grant superuser if asked. then change the governor or cpu clock. JUST, dont overclock your cpu too high because its only drain your battery quickly and shorten the CPU life

black87 said:
For overclock just flash one of the kernel availabe for CM11 (k2wl's Evolution kernel or xenon92's Nebula kernel)
then press the build number in "about phone" 7-10 times (im forgot). The performance setting will appear in settings menu (not "about phone"). Grant superuser if asked. then change the governor or cpu clock. JUST, dont overclock your cpu too high because its only drain your battery quickly and shorten the CPU life
Click to expand...
Click to collapse
Build number ...seven times....
And nebula will include performance control app anyway
Sent from my GT-I9082 using Tapatalk

Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014

Showman2020 said:
Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014
Click to expand...
Click to collapse
I know that feel bro
Sent from my GT-I9082 using Tapatalk

Showman2020 said:
Sorry but nebulla is bad and i hate it
I reflash the rom again -.-
I was getting alot of reboots
Sent from Galaxy Grand CM11 LAST BUILD 1.1.2014
Click to expand...
Click to collapse
Yap. random reboots on Omni Rom. try Evolution kernel