http://forum.xda-developers.com/showthread.php?t=1786202
when trying to install the rom from that thread i get stuck at the boot animation even though i followed all the necessary instructions. what do?
Wipe cache and dalvik cache. When it boots go back to recovery and go advance > fix permission.
Sent from my Galaxy Nexus using xda app-developers app
i did that and it hasnt worked. i dont know whats causing it since i followed everything OP said to do
Bad download? Its happened to me before.
Sent from my SAMSUNG-SGH-T989 using xda premium
Mine too... bricked!
hey, i don't know if this will help with your rom, but i will tell you something that helped me.
i was having the same problem trying to install cm9. this is what to do. don't wipe with recovery.
use darkside super wipe. i run it twice. then flash rom. while still in recover flash darkside cache wipe, not super wipe!!
for some reason when i wiped with the tools inside recovery i would get bootloop. can't lie don't know why but i did this and it woked.
hope this helps..
YummyLaxatives said:
http://forum.xda-developers.com/showthread.php?t=1786202
when trying to install the rom from that thread i get stuck at the boot animation even though i followed all the necessary instructions. what do?
Click to expand...
Click to collapse
Have you tried.
Downloading rom again?
Are you doing a full wipe before installing?
Trying a Cache wipe using the darkside flash?
What recovery are you using?
Are you flashing anything with it, a kernel? or a mod?
First off if you're on ANY recovery that isn't CWM 5.0.2.7 you DO NOT NEED TDJS SUPER WIPE OR CACHE WIPE SCRIPTS!!!! Seriously stop flashing these people you're filling up threads with problems caused by both of these scripts and bad flashing methods. Here's how to PROPERLY flash a ROM..
If on CWM 6.0.x.x
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
If you're on a Cyanogenmod nightly a full wipe IS NOT REQUIRED. The proper method of dirty flashing is just wiping cache, ( NOT FORMAT CACHE IN MOUNTS & STORAGE )
wiping dalvik and flashing your ROM. Simple as that.
If using TWRP 2.2+ the steps are essentially the same or use TDJs wipe scripts. They work perfectly fine with TWRP. Feel free to wipe 2x or even 3x if it makes you feel safer about your installation.
And THAT'S IT. People are cluttering up threads with issues than can totally be avoided by flashing the right way. I hope this helps some of you iron out these insane tiny quirks I keep reading about.
Happy flashing folks.
EDIT:
I forgot to note.. if you're still using one of TDJs roms or any other rom that automatically wipes with TDJs SUPER CACHE WIPE, do NOT use any other recoveries other than CWM 5.0.2.7 or TWRP 2.2+. With any other recovery such as CWM 6.0.x.x+, the wipe script breaks the roms ability to reboot properly and the only way to solve this is to use TDJs CACHE WIPE which in turn breaks your recoveries ability to work properly.
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks man this was needed. Yes threads get filled with this so often. I dirty flash like you mentioned accept I format system first. I also clean flash like you mentioned but never formatted cache and dalvik just system. That's good to know. Thanks
But I will add those new steps. I format system when dirty flashing because on the cm10 Site they mentioned that.
Again thanks
Sent from my SAMSUNG-SGH-T989 using xda premium
I edited OP with a little bit more information for safer flashing.
Sent from my SGH-T989 using xda premium
Sad we need to keep telling people how to flash. If you are not sure what you are doing I think you should be very careful before you destroy your expensive toy. Everyone should have an idea on how to flash and restore from a bad flash before they even root. Also as my sig says let Google be your friend people if you run into issues instead of running to a thread and clogging it up...
Thanks for post and this is a bump to keep it on page 1 and hopefully more people will notice it.
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Goofy317 said:
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Click to expand...
Click to collapse
Can you boot into recovery at all? If you can.. download the TWRP 2.2.2.0 zip in its thread and flash it. Its going to hang in the install process but should say twrp has been installed. At that point reset your phone by holding the power button. As soon as you feel the phone vibrate hold down both volume buttons and you should boot into TWRP recovery.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
Darkside superwipe will only mess your ROMs ability to reboot on touchwiz ROMs. The only way to fix this is flashing the darkside cache wipe which WILL break clockwork mod 6.0.1.4 like the user above. Point is.. don't use either scripts at all on CWM. Wipe the old fashioned way.
Sent from my SAMSUNG-SGH-T989 using xda premium
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
I agree. even after switching to twrp I still find the script useful. But op warning about using script with cwm version 6xxx might be true. I have issue with boot when i was on cwm 6 and i had to Odin cwm 5.0.2.7 again to get into recovery menu.
Sent from my SGH-T989 using xda app-developers app
Thanks, always forgot the formatting steps
ultratt said:
Thanks, always forgot the formatting steps
Click to expand...
Click to collapse
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
RushAOZ said:
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Davy Jones said:
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Click to expand...
Click to collapse
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
RushAOZ said:
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Oh cool, I was already really liking TWRP and this makes it even better.
This thread should be a sticky.
Khameleon said:
This thread should be a sticky.
Click to expand...
Click to collapse
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
apicia said:
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
Click to expand...
Click to collapse
Just go into CWM and wipe cache in the main menu and dalvik in the advanced menu. To be honest though you don't need to do this whatsoever. Only when dirty flashing a new nightly. In my experience atleast lol as far as gapps go..
http://goo.im/gapps/gapps-jb-20121011-signed.zip
These should work just fine
Sent from my SAMSUNG-SGH-T989 using xda premium
Bump fer new users yo
Sent from my SGH-T989 using xda premium
Bump for new users
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks
I rooted my phone fine. I unlocked my phone fine.
I installed clockworkmod recovery fine. I flashed clockworkmod. I backed up my rom at the stage after rooting and unlocking.
I then downloaded cyanogenmod from the app's download page. I downloaded it and installed it. I used the default selections which is "wipe delvich cache"
When I turned on my phone, it stays at the blue screen with the alien forever.
Any help on what to do? Thanks!
Reflash the ROM using these instructions. You probably wiped the wrong way.
http://forum.xda-developers.com/showthread.php?p=32532260
Sent from my SGH-T989 using xda premium
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
ctrlaltdeln said:
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Wow very informative and helpful too bad the OP could not at least give you some props and let you know he saw this and you helped him out. People panic come on here and ask questions then never come back to thank or at least acknowledge the help... Hey for that I will give you your first xda Thanks.... :good:
Try returning to stock and try again. Do things in this order: 1. Root, CWM, ETC. 2. CM7 or another 2.3 ROM (usual wipe) 3. CM9 (again, wipe)
The DARKSIDE SUPERWIPE thread ahs been discontinued, but I was wondering in anyone knew of a similar tool that would provide a clean wipe of everything before flashing ROMs and kernels?
DARKSIDE SUPERWIPE hung up on my while it was erasing my cache. Couldn't get it to complete the wipe. I'm running Juggernaught 5.0 (mainly 'cus its stable) and want to wipe and then flash CM10.0.
My cache seems to not be getting properly wiped.
Appreciate any advice
T-Mobile SGS-2, SGH-T989
Samsung vibrant has a wipe.
Sent from my SGH-T989 using xda premium
First off, wrong area. This should be in the Q&A section. Secondly, if you are using TWRP recovery, you can just use its built-in wiper. It works.
If your recovery is anything but 5.0.2.8 or whatever that ancient one is, you don't need it.
Sent from my SAMSUNG-SGH-T989 using xda premium
It has been reported that darkside super wipe, has been breaking the newer recoveries. As said there would also be no point in its existence because of the effective wipes the recoveries themselves can do. So in a nutshell. Just use the regular wipe.
I tried to flash the S.E.A.L rom and black hawk kernel. I ended up getting a flickering color screen that's blurry and a shaky screen. Did I do something wrong this time or is the V4 rom still buggy?? Please help me thanks
Sent from my iPhone using Tapatalk
Gambino1ne said:
I tried to flash the S.E.A.L rom and black hawk kernel. I ended up getting a flickering color screen that's blurry and a shaky screen. Did I do something wrong this time or is the V4 rom still buggy?? Please help me thanks
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I had this too try a reflash again don't forget to full wipe also.
I'm on the cwm recovery and I did every wipe possible with the kernel and still had the problem
Sent from my iPhone using Tapatalk
Gambino1ne said:
I'm on the cwm recovery and I did every wipe possible with the kernel and still had the problem
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Do it again, at first normaly flash The Rom with full wipe, reboot after them flash The kernel with wipe cache and dalvik.
Okay thanks I'm gonna try it when I get off work
Sent from my iPhone using Tapatalk
bierma32 said:
Do it again, at first normaly flash The Rom with full wipe, reboot after them flash The kernel with wipe cache and dalvik.
Click to expand...
Click to collapse
Thank you very much brother! Wiping my tab and installing each zip individually worked! Did a full wipe and delvik wipe than install the sealV4 zip. Than did both cache wipes, and installed the kernel and worked like a charm. You rock!