Related
So I rooted by phone and tried to install a new ROM, now the phone wont boot, It gets to the flash animation S logo and just keeps doing that, any solutions?
cbbordianu said:
So I rooted by phone and tried to install a new ROM, now the phone wont boot, It gets to the flash animation S logo and just keeps doing that, any solutions?
Click to expand...
Click to collapse
Can I get more info, like which rom did you flash, and how did you root your phone, what process did you take? Did you do wipes prior to flashing. Thanks, will try to help you out.
Go back into recovery and flash your backup or use Odin to flash a stock rom, your just in a bootloop. You mustve flashed a bad download.
Sent from my SGH-T989 using xda premium
Seanster_GBaxe EX v1.4.1:Taste of ICS is the rom... pretty much used odin to install cwm base recovery 5.0.2.6 I dont think i wipe prior to flashing. Once I installed the rom it booted fine but everything was slow and my phone kept getting errors, so then i went back in cwm and wiped all the data, now when i try to install the rom again it just takes like 5 seconds to install, i reboot the phone but it keeps going into a loop.... at this point i am pretty lost. I am new to this stuff... :/
How do i download this rom/kernel/mod........
Oh thats right its in the wrong section ah thats it no wonder i couldnt figure it out (sarcasm)
Sent from my SGH-T989 using XDA App
Did you try clearing cache , wiping dalvik and fixing permissions?
cbbordianu said:
Seanster_GBaxe EX v1.4.1:Taste of ICS is the rom... pretty much used odin to install cwm base recovery 5.0.2.6 I dont think i wipe prior to flashing. Once I installed the rom it booted fine but everything was slow and my phone kept getting errors, so then i went back in cwm and wiped all the data, now when i try to install the rom again it just takes like 5 seconds to install, i reboot the phone but it keeps going into a loop.... at this point i am pretty lost. I am new to this stuff... :/
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
On a more helpful note just wipe and reflash another rom or a backup if you have it, if that fails odin to the stock rooted rom.
Sent from my SGH-T989 using XDA App
yah man, I am not sure how to go back to the stock rom
cbbordianu said:
yah man, I am not sure how to go back to the stock rom
Click to expand...
Click to collapse
Use odin, you used it to flash recovery same process to flash stock rom just find a file to flash through odin
Sent from my SGH-T989 using XDA App
ebatr8 said:
Use odin, you used it to flash recovery same process to flash stock rom just find a file to flash through odin
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Ok so i got a stock ROM, what do i do in ODIN, the only thing i used odin was for cwm recovery....
cbbordianu said:
Ok so i got a stock ROM, what do i do in ODIN, the only thing i used odin was for cwm recovery....
Click to expand...
Click to collapse
I did that and still in a bootloop
Did you goninto recovery and wipe cache dalvik and permissions. Or even better just factory reset after installing stock rom. Odin to stock doesnt faxtory reset your phone. Old files could still be lingering in there.
cbbordianu said:
I did that and still in a bootloop
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
chib1panda said:
Did you goninto recovery and wipe cache dalvik and permissions. Or even better just factory reset after installing stock rom. Odin to stock doesnt faxtory reset your phone. Old files could still be lingering in there.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
i did that and the same thing is happening, this blows
Try redownloading the rom, then in recovery make sure you are A. Wipe Factory Data Reset, B. Wipe Cache, C. Advanced Menu Wipe Dalvik D. Advanced Menu Wipe Battery Stats, E. Mounts/Storage Format Cache, System, Boot, Emmc, Then flash the Rom.
Silly question but are you installing 1.4 before flashing 1.4.1? Cause I think that ROM needs the 1.4 full flashed prior to flashing 1.4.1.
Sent from my SGH-T989 using XDA App
can you give me a link to a stock ROM? the one i am using is SGH-T989-Stock-UVKID
so then I do what you just told me
A. Wipe Factory Data Reset, B. Wipe Cache, C. Advanced Menu Wipe Dalvik D. Advanced Menu Wipe Battery Stats, E. Mounts/Storage Format Cache, System, Boot, Emmc,
Then flash the Rom - Go into Odin and Select the file(click pda), then click start - correct?
Follow this to get to stock. http://forum.xda-developers.com/showthread.php?t=1462870
if phone isnt stock and you still have files there then do factory reset from phone or stock recovery.
Sent from my SGH-T989 using XDA App
Royalknight6190 said:
Try redownloading the rom, then in recovery make sure you are A. Wipe Factory Data Reset, B. Wipe Cache, C. Advanced Menu Wipe Dalvik D. Advanced Menu Wipe Battery Stats, E. Mounts/Storage Format Cache, System, Boot, Emmc, Then flash the Rom.
Click to expand...
Click to collapse
ok so i did that now its stuck at the first screen "samsung galaxy s2 ANDROID 4G TMOBILE"
I think its because everything is wiped off my phone... i am so lost, i hate doing this stuff
chib1panda said:
Follow this to get to stock. http://forum.xda-developers.com/showthread.php?t=1462870
if phone isnt stock and you still have files there then do factory reset from phone or stock recovery.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
doing this as we speak, keeping my fingers crossed
me too.
cbbordianu said:
doing this as we speak, keeping my fingers crossed
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
Hi there everyone
have a weird issue... tried searching and nothing
ok, so i installed the first ROM of bigxie . everything went fine and nothing went wrong in any ways...
i then tried to install v2 of the ROM that came out a couple days later... and it wouldnt boot past the google writing screen... no matter what i do it wont boot into android... i have dont the wipe data, cache, dalvik etc... this isnt my first rodeo lol
i have tried flashing other jelly bean ROMs an nothing... i can restore to my previous ICS perfectly fine but nothing will load JB...
i have tried to restore with Odin but now in bootloader windows wont detect the phone at all... i have kies installed and have separately installed the drivers, nothing is making Odin see the devices, so i cant even use odin to restore to a factory image...
i have the latest bootloader installed and have the latest touch CWM installed as well... currently running the latest kernel from franco and using aokp 40
this is not making any sense to me and i need help to get my device back to JB, as ICS i cant stand anymore LOL
thanks for you help in advance!
http://forum.xda-developers.com/showthread.php?t=1626895
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
c_86 said:
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
Click to expand...
Click to collapse
I have the same problem ics rom work perfectly but jb roms get stuck in the Google screen or the X screen and I tried leaving it alone for a while but it drains the battery and turns off
@ c_86 and kingviper10: not sure what you guys are trying to do, but instructions on how to flash stock images are in the first post of the thread I linked to, and instructions for JB are in the second post. Not sure why you are talking about Odin or toolkits...
Sent from my Galaxy Nexus using Tapatalk 2
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
SikkNazty said:
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
Click to expand...
Click to collapse
I'm pretty sure he did say that he was on the touch version of CWR .
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
c_86 said:
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
Click to expand...
Click to collapse
Then you are doing something wrong. Did you follow the instructions in the link I provided you?
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What is "the fix" you are talking about?
And use this recovery, not the one you are using. (The touch one is not entirely stable, even koush said so, so I have no idea why people insist on using it...)
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Thanks I'll try that recovery and see if that works. I'll report back later.
As for fixing permissions. Yes I've tried that as well. No luck either.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Why do you wipe cache and dalvik cache twice?
707BeastMode707 said:
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
This makes more sense. And yeah, try the recovery image efrant kindly linked you to, i didnt have any issues with twrp 2.1.2 either, if i may.
sent from my i9250
ooook... no go on that recovery image either...
i flashed the 5.5.0.2 recovery and same issue... will not boot past the google writing screen... i really dont know what else to do...
anyone?!
First off if you're on ANY recovery that isn't CWM 5.0.2.7 you DO NOT NEED TDJS SUPER WIPE OR CACHE WIPE SCRIPTS!!!! Seriously stop flashing these people you're filling up threads with problems caused by both of these scripts and bad flashing methods. Here's how to PROPERLY flash a ROM..
If on CWM 6.0.x.x
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
If you're on a Cyanogenmod nightly a full wipe IS NOT REQUIRED. The proper method of dirty flashing is just wiping cache, ( NOT FORMAT CACHE IN MOUNTS & STORAGE )
wiping dalvik and flashing your ROM. Simple as that.
If using TWRP 2.2+ the steps are essentially the same or use TDJs wipe scripts. They work perfectly fine with TWRP. Feel free to wipe 2x or even 3x if it makes you feel safer about your installation.
And THAT'S IT. People are cluttering up threads with issues than can totally be avoided by flashing the right way. I hope this helps some of you iron out these insane tiny quirks I keep reading about.
Happy flashing folks.
EDIT:
I forgot to note.. if you're still using one of TDJs roms or any other rom that automatically wipes with TDJs SUPER CACHE WIPE, do NOT use any other recoveries other than CWM 5.0.2.7 or TWRP 2.2+. With any other recovery such as CWM 6.0.x.x+, the wipe script breaks the roms ability to reboot properly and the only way to solve this is to use TDJs CACHE WIPE which in turn breaks your recoveries ability to work properly.
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks man this was needed. Yes threads get filled with this so often. I dirty flash like you mentioned accept I format system first. I also clean flash like you mentioned but never formatted cache and dalvik just system. That's good to know. Thanks
But I will add those new steps. I format system when dirty flashing because on the cm10 Site they mentioned that.
Again thanks
Sent from my SAMSUNG-SGH-T989 using xda premium
I edited OP with a little bit more information for safer flashing.
Sent from my SGH-T989 using xda premium
Sad we need to keep telling people how to flash. If you are not sure what you are doing I think you should be very careful before you destroy your expensive toy. Everyone should have an idea on how to flash and restore from a bad flash before they even root. Also as my sig says let Google be your friend people if you run into issues instead of running to a thread and clogging it up...
Thanks for post and this is a bump to keep it on page 1 and hopefully more people will notice it.
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Goofy317 said:
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Click to expand...
Click to collapse
Can you boot into recovery at all? If you can.. download the TWRP 2.2.2.0 zip in its thread and flash it. Its going to hang in the install process but should say twrp has been installed. At that point reset your phone by holding the power button. As soon as you feel the phone vibrate hold down both volume buttons and you should boot into TWRP recovery.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
Darkside superwipe will only mess your ROMs ability to reboot on touchwiz ROMs. The only way to fix this is flashing the darkside cache wipe which WILL break clockwork mod 6.0.1.4 like the user above. Point is.. don't use either scripts at all on CWM. Wipe the old fashioned way.
Sent from my SAMSUNG-SGH-T989 using xda premium
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
I agree. even after switching to twrp I still find the script useful. But op warning about using script with cwm version 6xxx might be true. I have issue with boot when i was on cwm 6 and i had to Odin cwm 5.0.2.7 again to get into recovery menu.
Sent from my SGH-T989 using xda app-developers app
Thanks, always forgot the formatting steps
ultratt said:
Thanks, always forgot the formatting steps
Click to expand...
Click to collapse
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
RushAOZ said:
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Davy Jones said:
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Click to expand...
Click to collapse
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
RushAOZ said:
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Oh cool, I was already really liking TWRP and this makes it even better.
This thread should be a sticky.
Khameleon said:
This thread should be a sticky.
Click to expand...
Click to collapse
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
apicia said:
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
Click to expand...
Click to collapse
Just go into CWM and wipe cache in the main menu and dalvik in the advanced menu. To be honest though you don't need to do this whatsoever. Only when dirty flashing a new nightly. In my experience atleast lol as far as gapps go..
http://goo.im/gapps/gapps-jb-20121011-signed.zip
These should work just fine
Sent from my SAMSUNG-SGH-T989 using xda premium
Bump fer new users yo
Sent from my SGH-T989 using xda premium
Bump for new users
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks
I rooted my phone fine. I unlocked my phone fine.
I installed clockworkmod recovery fine. I flashed clockworkmod. I backed up my rom at the stage after rooting and unlocking.
I then downloaded cyanogenmod from the app's download page. I downloaded it and installed it. I used the default selections which is "wipe delvich cache"
When I turned on my phone, it stays at the blue screen with the alien forever.
Any help on what to do? Thanks!
Reflash the ROM using these instructions. You probably wiped the wrong way.
http://forum.xda-developers.com/showthread.php?p=32532260
Sent from my SGH-T989 using xda premium
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
ctrlaltdeln said:
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Wow very informative and helpful too bad the OP could not at least give you some props and let you know he saw this and you helped him out. People panic come on here and ask questions then never come back to thank or at least acknowledge the help... Hey for that I will give you your first xda Thanks.... :good:
Try returning to stock and try again. Do things in this order: 1. Root, CWM, ETC. 2. CM7 or another 2.3 ROM (usual wipe) 3. CM9 (again, wipe)
I've installed ROMs before so I'm not a complete noob, but I'm clearly doing something wrong and would like some help.
I've tried installing 3 different JB ROMs (Kobridge tweaked FL04, Jellyverse0.3, JB Black Bean) and everytime I boot up into the Sprint animation and it hangs every single time at the big 4G. I'm coming from BluKuban which I return to every time after flashing EL29 direct boot through pc Odin.
This is what I've been doing:
Installed EL29 direct boot or EL26 stock
cleared cache, davlik and run Format_All_X2
Installed JB modem
installed ROM
run Format All X2 again
A couple of files might be different depending on the ROM instructions, but that's what I've been doing.
Any ideas what I'm doing wrong?
flamand said:
I've installed ROMs before so I'm not a complete noob, but I'm clearly doing something wrong and would like some help.
I've tried installing 3 different JB ROMs (Kobridge tweaked FL04, Jellyverse0.3, JB Black Bean) and everytime I boot up into the Sprint animation and it hangs every single time at the big 4G. I'm coming from BluKuban which I return to every time after flashing EL29 direct boot through pc Odin.
This is what I've been doing:
Installed EL29 direct boot or EL26 stock
cleared cache, davlik and run Format_All_X2
Installed JB modem
installed ROM
run Format All X2 again
A couple of files might be different depending on the ROM instructions, but that's what I've been doing.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Don't flash format all zip after flashing rom zip.
You are wiping system right after flashing rom so there is no system and thus you don't boot.
Sent from my SPH-D710 using xda app-developers app
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
BluesRulez said:
Don't flash format all zip after flashing rom zip.
You are wiping system right after flashing rom so there is no system and thus you don't boot.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
flamand said:
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
Click to expand...
Click to collapse
It wipes system, not dalvik.
flamand said:
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
Click to expand...
Click to collapse
Its not a suggestion. Its your FIX. It wipes system. I hope you are not confusing format all x2 zip with modified_format all zip. The modified zip wipes only the caches.
As such there is NO need to wipe after flashing the ROM..
Are you following the directions on the OP of each ROM?
If not... do it, that is how you fix your problem.
Sent from my SPH-D710 using xda premium
Yes I am, unless I'm misunderstanding something. That list is what seemed to be in common to all three.
I'll try to do it again tomorrow when I have a few hours.
Mattix724 said:
Are you following the directions on the OP of each ROM?
If not... do it, that is how you fix your problem.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse