Develop Bugs

[Q] Custom rom 2 another custom rom ?

I am on HD revolution 14 custom rom and i would like to try another custom rom (or the newerr HD rev 15).
What is the easier method to put another custom rom ?
Will i loose everything again ?
Thanks.

Wrong forum but anyway
1. use titanium backup to backup all current apps and data
2. download zip of ROM
3. flash zip and boot.IMG
4. wipe data and dalvik cache
5. reboot.
6. Redownload titanium backup and restore your apps and data.

XxVcVxX said:
Wrong forum but anyway
1. use titanium backup to backup all current apps and data
2. download zip of ROM
3. flash zip and boot.IMG
4. wipe data and dalvik cache
5. reboot.
6. Redownload titanium backup and restore your apps and data.
Click to expand...
Click to collapse
Τhank you....
I am a new member and i am not allowed to post anywhere else.
the boot.img is the img included in the newer ROM ?

toxotis70 said:
Τhank you....
I am a new member and i am not allowed to post anywhere else.
Click to expand...
Click to collapse
You can always press the thanks button instead of typing it out

XxVcVxX said:
Wrong forum but anyway
1. use titanium backup to backup all current apps and data
2. download zip of ROM
3. flash zip and boot.IMG
4. wipe data and dalvik cache
5. reboot.
6. Redownload titanium backup and restore your apps and data.
Click to expand...
Click to collapse
I don't see why he's in the wrong forum
toxotis70 said:
I am on HD revolution 14 custom rom and i would like to try another custom rom (or the newerr HD rev 15).
What is the easier method to put another custom rom ?
Will i loose everything again ?
Thanks.
Click to expand...
Click to collapse
Firstly , if you just want to flash the ARHD 15 from ARHD 14 . You can just flash the newer boot.img and then flash the ROM without wiping because there's not a big difference in the base . You can wipe cache and dalvik cache but not necessarily , but wiping both of them won't do any harm right ? Use Titanium Backup to backup your apps and data if you don't want to lose anything . If you want to flash another custom ROM , do a full wipe ( cache , dalvik cache , factory and format system ) then flash the boot.img and ROM and ( other stuff that might be needed for the ROM such as Gapps for ICJ , it will be noted in the thread so just follow the instructions )
---------- Post added at 12:52 AM ---------- Previous post was at 12:51 AM ----------
You can either download the boot.img youself or extract it from the ROM .

i have arhd 13.0 and hboot 1.28 and now i want arhd 15.0.Do I have to have a new version hboot?

marxone said:
i have arhd 13.0 and hboot 1.28 and now i want arhd 15.0.Do I have to have a new version hboot?
Click to expand...
Click to collapse
Yes, your hboot must Be 1.31 or 1.33

1.28 will do but there are fixes in 1.31 / 1.33 so ... go and update it for a better one
nevermore6990 said:
Yes, your hboot must Be 1.31 or 1.33
Click to expand...
Click to collapse
Don't have to be 1.31 / 1.33 .

[Q] Boot Loop, Need help!

i have been running the kiss kernel for a while now, last night i tried to flash the hellboy kernel and retern to my pacman rom. but it still boots, i have cleared all my caches formated everything but my sd card, have tried flashing all kiss kernels and multipul hellboy kernels, but never gets passed the boot screen.. any ideas?

i managed to get it to the android is upgrading.. starting apps thing, but it gets stuck there.

Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?

lilrob1213 said:
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
Click to expand...
Click to collapse
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement

JARR3DF15CH3R said:
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
Click to expand...
Click to collapse
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?

lilrob1213 said:
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
Click to expand...
Click to collapse
yeah i installed it after, pacman http://forum.xda-developers.com/showthread.php?t=1948770&page=12
im with telus gsm. the rom was working fine, but i went to change the kernel to hellboy cause i herd it was a bit better and now im in this bootloop

also not running the newest version of that rom, i am running v15a

Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?

lilrob1213 said:
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
Click to expand...
Click to collapse
thanks anyways, ill be sure to give that a try:silly:

Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!

bahubali67 said:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
Click to expand...
Click to collapse
yeah i always wait a little while, i have chosen latest kernel, has not made a difference, i have gotten better results using an older one of the titanium kiss, hellboy doesnt seem to work with my phone for some reason

Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.

mihirengg19 said:
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
Click to expand...
Click to collapse
i am using the all in one tool kit to flash my kernel, yes i am in fastboot, a window pops up runs through code and my phone reboots, i have changed the kernel on it before, but for some reason this time it wont boot properly at all, the phone is currently at the " android is upgrading" screen, it was the starting apps box with the spinning circle

if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.

1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
thank you so much 1ceb0x! my phone has been in this bootloop for an entire 24 hours,

1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel:
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!

chikuera said:
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
Click to expand...
Click to collapse
Thats the old version.... See the changelog code and flash dat in future..... Right now.... Here u go....
http://www.mediafire.com/?waggdha1ir1lxz0

No WIFI/Signal/GPS with new kernel

Hey guys,
since a few weeks now i have some problems if i flash new kernels on sense based roms.
Always if i flash a new kernel WIFI/Signal/GPS does not work...
On AOSP/CM10/AOKP everything works fine.
I also tested some new radios, currently im on 5.1204.162A.29 and on hboot 1.36 (CID VODAP120)
Does someone know how to fix that?
Greets Gingerbread
/Edit: I also tried to set APN manually but it doesnt work...

Which ROM are you on currently?
If you flash an AOSP kernel on a Sense ROM, it might break something and vice-versa.... hence the problem...
And after flashing the boot.img via fastboot, you also have to flash the modules via recovery and then wipe cache/dalvic!

vin4yak said:
Which ROM are you on currently?
If you flash an AOSP kernel on a Sense ROM, it might break something and vice-versa.... hence the problem...
And after flashing the boot.img via fastboot, you also have to flash the modules via recovery and then wipe cache/dalvic!
Click to expand...
Click to collapse
Im Currently on MIUI v5, and i flashed a sense Kernel.
Here a list what i did:;
1. flashed boot img.
2. erase cache
3. flashed sense Kernel. (After i did a full boot of the rom)
4. wipe dalvik cache
5 setup APN
and it still does not work.

Gingerbread23 said:
Im Currently on MIUI v5, and i flashed a sense Kernel.
Here a list what i did:;
1. flashed boot img.
2. erase cache
3. flashed sense Kernel. (After i did a full boot of the rom)
4. wipe dalvik cache
5 setup APN
and it still does not work.
Click to expand...
Click to collapse
I have absolutely no idea about MIUI.. I only know this much that you have to flash a sense kernel... Does it need repack? No clue! Wait for some other person to reply or ask in the MIUI thread...
However, you shouldn't boot into your ROM after flashing the boot.img
1. fastboot flash boot boot.img
2. fastboot erase cache
3. Go to recovery and wipe cache partition and wipe dalvic
4. Flash modules.zip
5. Reboot

vin4yak said:
I have absolutely no idea about MIUI.. I only know this much that you have to flash a sense kernel... Does it need repack? No clue! Wait for some other person to reply or ask in the MIUI thread...
However, you shouldn't boot into your ROM after flashing the boot.img
1. fastboot flash boot boot.img
2. fastboot erase cache
3. Go to recovery and wipe cache partition and wipe dalvic
4. Flash modules.zip
5. Reboot
Click to expand...
Click to collapse
Oops sry, i mean i flashed boot.img AND kernel after i made a full boot.
And i tried it with repacking and normal boot.img.

Gingerbread23 said:
Oops sry, i mean i flashed boot.img AND kernel after i made a full boot.
And i tried it with repacking and normal boot.img.
Click to expand...
Click to collapse
Hmmm... try wiping cache and dalvic... Reboot...
Ask ROM related issues in the ROM thread m8! there you will get more accurate answers from the other MIUI users and developer!

The problem is its on all sense roms...
Only on AOSP/CM10/AOKP roms everything works fine.

push

[Q] Going back to stock from maximus hd

So I rooted and installed the maximusHD rom with sense 5 yesterday, only to find out that there is an official update in Europe today. I've tried to unroot and return to stock but I'm kind of stuck. My computer gives me the 140 error when installing the RUU. My cid is E11. Please help me get back to android 4.1.1 and sense 4+ so I can update the official way. Thanks in advance

vaaern said:
So I rooted and installed the maximusHD rom with sense 5 yesterday, only to find out that there is an official update in Europe today. I've tried to unroot and return to stock but I'm kind of stuck. My computer gives me the 140 error when installing the RUU. My cid is E11. Please help me get back to android 4.1.1 and sense 4+ so I can update the official way. Thanks in advance
Click to expand...
Click to collapse
the update is not yet rolling out for HTC_E11 i have this cid to and i don't have it so

stekke123 said:
the update is not yet rolling out for HTC_E11 i have this cid to and i don't have it so
Click to expand...
Click to collapse
Then it's not far off I guess? I don't really mind being with the previous version for a while. As long as it's official it's okay.

and what kind of RUU are you using

stekke123 said:
and what kind of RUU are you using
Click to expand...
Click to collapse
I tried these
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
for this 3.20.401.1

and whats your main version? 3.14 3.18 3.20?

stekke123 said:
and whats your main version? 3.14 3.18 3.20?
Click to expand...
Click to collapse
Doing the fastboot command I get 3.20.401.1

you cant use a ruu there is no ruu for 3.20 just take a nandroid backup for 3.20 and stock recovery and boot.img and off you go

stekke123 said:
you cant use a ruu there is no ruu for 3.20 just take a nandroid backup for 3.20 and stock recovery and boot.img and off you go
Click to expand...
Click to collapse
Somewhere I started downloading a nandroid backup for 3.18.401.1 That won't work either then?

that will work to no problem with that

stekke123 said:
that will work to no problem with that
Click to expand...
Click to collapse
Okay thanks! I will try that and hope it works, do I have to do anything after that? or is everthing back the way it was before? (unrooted and such?)

It didn't work :s device won't boot anymore!

Make a full wipe in the recovery, restore the nandroid .... and flash the boot.img file from the nandroid backup !!!

Mr Hofs said:
Make a full wipe in the recovery, restore the nandroid .... and flash the boot.img file from the nandroid backup !!!
Click to expand...
Click to collapse
Which is exactly what I did. It's just stuck, it doesn't even show the 'ONE'.

Flash the recovery.img from the nandroid folder too and then full wipe it.
Did you format also in the mounts and storage section the cache,data and system. And also the dalvik cache in the advanced section ?

Mr Hofs said:
Flash the recovery.img from the nandroid folder too and then full wipe it.
Did you format also in the mounts and storage section the cache,data and system. And also the dalvik cache in the advanced section ?
Click to expand...
Click to collapse
Some minor help please. Which RUU do I need to download for CID HTC_032 before getting OTAs all the way to 4.18./Sense 5?

Mr Hofs said:
Flash the recovery.img from the nandroid folder too and then full wipe it.
Did you format also in the mounts and storage section the cache,data and system. And also the dalvik cache in the advanced section ?
Click to expand...
Click to collapse
I'll try it again tomorrow!

Mr Hofs said:
Flash the recovery.img from the nandroid folder too and then full wipe it.
Did you format also in the mounts and storage section the cache,data and system. And also the dalvik cache in the advanced section ?
Click to expand...
Click to collapse
I tried this several times, also in the same procedure you posted to someone with almost exactly the same phone as me (so I downloaded the same files). Phone boots but is stuck on htc quietly... I just flashed the maximus rom again, posted on that thread, but I don't get much response from them. I guess I'm stuck in custom roms?

Oke one more go !
Download my nandroid
http://db.tt/BBiLrMPm
Unpack to the sdcard, copy the boot.img to the fastboot folder
Flash the boot.img
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and make a full wipe
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache, data, system
Then restore the nandroid backup and reboot.
Should work flawless ..... report back when done please

Mr Hofs said:
Oke one more go !
Download my nandroid
http://db.tt/BBiLrMPm
Unpack to the sdcard, copy the boot.img to the fastboot folder
Flash the boot.img
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and make a full wipe
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache, data, system
Then restore the nandroid backup and reboot.
Should work flawless ..... report back when done please
Click to expand...
Click to collapse
Ok, now it tells me it cannot open a directory when I try to restore...

Pop-up com.android.phone has stopped

Hi there !
I have a problem with my phone, this afternoon i finally decide to get on CM 10.2, it seems that everything went well but i have the pop-up "com.android.phone has stopped" which pop again and again every second. I tried to wipe data from the recovery and with the option on the settings, and i also tried to put the phone on airplane mode and then switch it off but i still have the problem.
I downloaded CM, gapps and CWM with the links in the official CM10.2 thread and i read carefully the instructions, i don't think that i have forgot something.
Does anybody have an idea for this problem?

Popofthepop said:
Hi there !
I have a problem with my phone, this afternoon i finally decide to get on CM 10.2, it seems that everything went well but i have the pop-up "com.android.phone has stopped" which pop again and again every second. I tried to wipe data from the recovery and with the option on the settings, and i also tried to put the phone on airplane mode and then switch it off but i still have the problem.
I downloaded CM, gapps and CWM with the links in the official CM10.2 thread and i read carefully the instructions, i don't think that i have forgot something.
Does anybody have an idea for this problem?
Click to expand...
Click to collapse
flashed the boot.img? fastboot erase cache after flashing the boot.img? wipe cache and dalvik in recovery after flashing the rom?

Yes, boot.img flashed, wiped cache + dalvik + data, but i don't use fastboot erase cache, isn't it the same thing as wipe cache? Is it important to wipe right after i flashed the ROM ? I think i did it after i flash boot.img

Popofthepop said:
Yes, boot.img flashed, wiped cache + dalvik + data, but i don't use fastboot erase cache, isn't it the same thing as wipe cache? Is it important to wipe right after i flashed the ROM ? I think i did it after i flash boot.img
Click to expand...
Click to collapse
It is vital. I actually fastboot erase cache, before and after I flash anything through fastboot, and I never have any problems.

Hmm ok, does I have to get back on stock or i can reflash the ROM and the boot.img directly, like on the official thread?

Popofthepop said:
Hmm ok, does I have to get back on stock or i can reflash the ROM and the boot.img directly, like on the official thread?
Click to expand...
Click to collapse
you can reflash, but do a full wipe in recovery first,
format cache, system, data and sdcard.
copy the rom back onto the card.
fastboot erase cache, flash the boot.img from the rom.zip and fastboot erase cache again.
then back to recovery and flash the rom and you should be good to go

I still have the pop-up =/ I exactly did what you wrote. By the way, it's the last nightly that i flashed.

What version (date please) of gapps do you use? Could it be you're running gapps for 4.2 on a 4.3 rom?
Sent from my HTC One X using xda app-developers app

I downloaded the package for CM10.2.x, 20130813.
EDIT: hboot 1.72.0000, don't know if it can help.

Popofthepop said:
I downloaded the package for CM10.2.x, 20130813.
EDIT: hboot 1.72.0000, don't know if it can help.
Click to expand...
Click to collapse
That should be the right gapps for CM10.2. About hboot I don't know exactly but I think it should be supported.

I just flashed the last nightly, and the pop-up don't pop anymore ! But i can't activate wifi =/

Popofthepop said:
I just flashed the last nightly, and the pop-up don't pop anymore ! But i can't activate wifi =/
Click to expand...
Click to collapse
Flashed the boot.img of the installed nightly ?
sent from my .......

Yes, full wipe then flash boot and rom + gapps, like nogotaclue told me.