I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?
I would only use the Darkside wipe scripts on CWM 5.X. Use Odin to reflash the recovery of your choice and then format system, factory reset, and then flash CM10.
Sent from my Nexus 4 using xda premium
Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?
heath.bse said:
Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?
Click to expand...
Click to collapse
Formatting the system only formats the /system partition and wipe data formats the /data partition.
What do you mean?
Sent from my Nexus 4 using xda premium
I would have made a backup of the stock rom then from the stock rom downloaded goomanager from play store then flash newest twrp recovery, then wiped and installed a appropriate ROM
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 06:33 AM ---------- Previous post was at 06:27 AM ----------
Of course your stock rom would have then needed to be rooted
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
heath.bse said:
I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?
Click to expand...
Click to collapse
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy
continual boot loop...tried everything here.
RealPariah said:
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy
Click to expand...
Click to collapse
I got cm10 on for about 20 minutes then CWM updated to 6.x. I flashed a nightly and it's been in a bootloop ever since. However, when I was on CM10 those few brief minutes I could not hear or he heard on a call.
No idea what to do now. I'm stuck on 2.3.6 unless there's some other trick I can do to get this thing to boot...
Why not just try a different rom? Lots of options out there.
Also, watch the dates on the how to's you read. A lot can be outdated.
Sent from my cell phone telephone....
Related
I tried a ROM update today (Magnolia) and my phone is now seriously slow (including SpeedTest which shows about 50Kbps download speed). I attempted to reinstall the same ROM and to restore a Nandroid (neither of which has helped). I did every wipe present in CWM v2.5.1.2 (I know v3.x.x.x is not a good wiper) and in HBOOT, also all to no avail.
It is possible that the ROM is focused on carefully updating itself rather than completely overwriting.
Does anyone have a recommendation as to the best way to really ensure that no old runaway processes are surviving the flashes (ROM or Nandroid)? I am wondering if flashing another ROM would do it (it wouldn't try to update), but am very open to suggestions.
Thanks!
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Dont use rom manager to install go into recovery. Do a factory reset twice, then goto mounts and storage and format manually, data, cache, system, boot. Do that twice or more and youre super wiped as you put it. But as far as magnolia goes...did you make sure that you dl'd the flashover and not the whole rom?
Sent from my ADR6300 using XDA App
Thanks
Pete - Thanks. I never use RomManager to do ANYTHING (and remain surprised that people do). I do factory reset and wipe in CWM but never formatted system; which I just posted in the Magnolia forum as being what I thought is causing all the trouble. At least this lets me know how to manually do it. Thanks
1107963 said:
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Click to expand...
Click to collapse
Building on this- I do EVERYTHING from recovery. In addition to the steps listed I also go to "mounts and storage" and wipe /system, /data, /cache, and /boot. Eradicate!
Sent from my ADR6300 using XDA Premium App
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
johnchad14 said:
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
Click to expand...
Click to collapse
Right? Super Charmin came to mind right away.
Sent from my ADR6300 using XDA App
I rooted the incredible using unrevoked, no problem.
Installed and ran root apps, no problem, backed up everything using titanium backup and rom manager (nandroid) and so forth, installed cw recovery 3.0.0.8.
When I install the skyraider 4 rom from rom manager, it reboots and installs, but then when it reboots again it hangs at the white htc incredible screen (and I've let it wait as long as a half an hour). I have to take out the battery to be able to reboot it.
I can boot back to recovery and then re-install and boot back to the stock rooted rom just fine. But I can't get a new rom installed and working.
I've looked at previous threads about this problem:
http://forum.xda-developers.com/showthread.php?t=1038402
http://forum.xda-developers.com/showthread.php?t=1023358
http://forum.xda-developers.com/showthread.php?t=991953
http://forum.xda-developers.com/showthread.php?t=739646
http://forum.xda-developers.com/showthread.php?t=620621
and several other threads on other sites.
The only suggestions to come out of those, other that starting over from scratch (which I've done multiple times now), were to reformat the sd card, which I've also done, and to downgrade to cm recovery 2.5.1.2. Rom manager only shows versions as old as 3.0.0.5. I have put the PB31IMG.zip file on the sd card and loaded that before to help recover but I don't see how that helps with installing a new rom.
Any other suggestions? The main reason I even need a new rom is because bluetooth doesn't work in the stock rom (known issue: http://community.htc.com/na/htc-forums/android/f/91/p/2336/8570.aspx )
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
patsfan1130 said:
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
Click to expand...
Click to collapse
appreciate your help, yeah I've been doing that everytime in rom manager. I tried it several times manually in cm recovery, too, and still the white screen.
I'll just see if verizon can exchange it, or else I'll sell it for another phone with working bluetooth.
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
k_nivesout said:
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
.
There is a flash of CWM 2.5 that temporarily lets you use that to flash the rom then when you reboot it will revert back. Try that.
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have a Samsung Galaxy Nexus GSM and have been trying to install the Paranoid Android flavor custom ROM, I had 2.22 installed not long ago but managed to screw it up when I updated it without clearing my security settings (I had a 4x4 pattern swipe which I couldn't enter with the update which restored it to 3x3 pattern) so I wiped and restored to stock 4.2. I'm now trying to re-install with any custom ROM but it's not working.
Whenever I install a ROM it seems to install ok but when I get to the boot screen it just hangs on the nexus/PA logo.
I've tried with:
Goo Manager
TWRP 2.2
TWRP 2.3
CWM 6.0.1.5
and with
PA 2.22
PA 2.99.1
PA 2.99.5
PA 2.99.6
PA 2.99.7
and I always get the same error, I've tried wiping all options within TWRP and CWM and going from there but that doesn't seem to work, the strange thing for me though is that if I re-install a stock Google ROM it works perfectly fine.
I'm fairly new so please be gentle.
flash the latest twrp and move the rom and gapps to your sdcard then follow this..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
if it still freezes at boot animation pull battery reboot to recovery wipe cache/dalvik and reboot
Thanks for the suggestion but that didn't work.
Any other suggestions?
When you say TWRP 2.3 do you mean 2.3.2.1? http://teamw.in/project/twrp2/90
Clockwork 6.0.1.5 is also outdated, newest is 6.0.1.9.
You need to update your recoveries for Android 4.2.X which is what PA 2.99 is based off of.
zephiK said:
When you say TWRP 2.3 do you mean 2.3.2.1?
Clockwork 6.0.1.5 is also outdated, newest is 6.0.1.9.
You need to update your recoveries for Android 4.2.X which is what PA 2.99 is based off of.
Click to expand...
Click to collapse
Yes I did mean 2.3.2.1, I wasn't sure what the whole version number was at the time and I was halfway through resetting up stock on my phone at the time so I didn't bother to check exactly. sorry about that.
Is there a way to completely wipe everything on the phone so that it is bare stock? I was just wondering if I would be able to start from a clean phone if it would make any difference. I'm aware of cache/delvik cache/internal storage/(i think it's called "system partition" or something like that).
Using TWRP, wiping cache, dalvik, and system should wipe everything except the sdcard contents. So doing these wipes should make your phone "bare stock" again as you described
Why don't you try downloading another custom ROM or download the same ROM again because maybe it is corrupted or something
osiris231 said:
Yes I did mean 2.3.2.1, I wasn't sure what the whole version number was at the time and I was halfway through resetting up stock on my phone at the time so I didn't bother to check exactly. sorry about that.
Is there a way to completely wipe everything on the phone so that it is bare stock? I was just wondering if I would be able to start from a clean phone if it would make any difference. I'm aware of cache/delvik cache/internal storage/(i think it's called "system partition" or something like that).
Click to expand...
Click to collapse
RANT: huh..... seriously? you couldn't have browsed around, searching for this COMMON issue (which usually comes down to user "error"), read the STICKIES, before posting?
first, internal storage = /data/media aka /storage/sdcard0/ aka /sdcard/
Please read all of this
http://forum.xda-developers.com/showthread.php?t=1626895
Hello,
I have been flashing multiple roms today in hopes of getting something to work. However, it's always the same situation:
1. Followed instructions for flashing.
2. Flash goes well
3. Reboot
4. Stuck on initial splash screen for that room
Am I missing something? Or am i just bricked?
Thanks
Well, first how long did you wait? First boot always takes the longest. If it takes more then 5 minutes, reboot into recovery and delete cache and dalvik.
LoopDoGG79 said:
Well, first how long did you wait? First boot always takes the longest. If it takes more then 5 minutes, reboot into recovery and delete cache and dalvik.
Click to expand...
Click to collapse
It was over 10 minutes. After I did what you said, it keeps rebooting now into recovery mode.
Here's what I currently have on:
1. CWMR 5.8 -Touch
2. TDJ Evo 4 v0
After a few booths I'm still stuck at the splash screen.
You may need a different recovery. The old recoveries did not wipe correctly. I recommend the latest TWRP
bkg.brett said:
You may need a different recovery. The old recoveries did not wipe correctly. I recommend the latest TWRP
Click to expand...
Click to collapse
+1. Here is a flashable zip to TWRP 2.3.3.0.
http://db.tt/uvBu75ph
It doesnt really matter what recovery he's on. The problem is he's not wiping his previous rom before flashing the new rom. On cwm I believe you go to mounts and storage, then go down to format/system. I never used cmw touch so I might be wrong. A safe bet is to google "darkside super wipe" and "darkside cache wipe". Download the zips and save onto your sd card. Then just flash those two before flashing rom. And you can flash the cache wipe again after flashing rom and gapps (its recommended by some devs but I never got the point since the caches havent been built yet)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
LoopDoGG79 said:
+1. Here is a flashable zip to TWRP 2.3.3.0.
http://db.tt/uvBu75ph
Click to expand...
Click to collapse
Thanks for the help everyone!
I managed to get All Star Rom 5 to load. I'm using that to download goomanager and install TWRP.
I love All Star Rom, but Wifi Calling is a must. I think Infamous is where I'm headed. Any issues with TWRP on that one?
iburnhearts said:
It doesnt really matter what recovery he's on. The problem is he's not wiping his previous rom before flashing the new rom. On cwm I believe you go to mounts and storage, then go down to format/system. I never used cmw touch so I might be wrong. A safe bet is to google "darkside super wipe" and "darkside cache wipe". Download the zips and save onto your sd card. Then just flash those two before flashing rom. And you can flash the cache wipe again after flashing rom and gapps (its recommended by some devs but I never got the point since the caches havent been built yet)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I was wiping and doing all that.
So, after I got goomanager, I installed TWRP. Through that I attempted to install Infamous 3.1. Now, all I get is the Samsung Galaxy screen before recovery/booting, and nothing but black. I'm not sure what I screwed up this time around. Any ideas?
proplaya422 said:
I was wiping and doing all that.
So, after I got goomanager, I installed TWRP. Through that I attempted to install Infamous 3.1. Now, all I get is the Samsung Galaxy screen before recovery/booting, and nothing but black. I'm not sure what I screwed up this time around. Any ideas?
Click to expand...
Click to collapse
Agree to disagree
Goo manager wiped your recovery. You need to enter download mode and use odin to put cwm back on. Then flash the twrp zip file that was posted above.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
iburnhearts said:
Agree to disagree
Goo manager wiped your recovery. You need to enter download mode and use odin to put cwm back on. Then flash the twrp zip file that was posted above.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply. I figured that out after spending 15 minutes looking for a TWRP file to flash through odin. I used CWM and everything worked like a charm. Reflashed TWRP. Then I downloaded Infamous. Didn't flash it through goomanager. Instead booted into TWRP, found it, then flashed. Everything is good now. Thought I was bricked for a few minutes there.
Thanks everyone for your help.