Develop Bugs

CM10 bootloop

I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?

I would only use the Darkside wipe scripts on CWM 5.X. Use Odin to reflash the recovery of your choice and then format system, factory reset, and then flash CM10.
Sent from my Nexus 4 using xda premium

Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?

heath.bse said:
Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?
Click to expand...
Click to collapse
Formatting the system only formats the /system partition and wipe data formats the /data partition.
What do you mean?
Sent from my Nexus 4 using xda premium

I would have made a backup of the stock rom then from the stock rom downloaded goomanager from play store then flash newest twrp recovery, then wiped and installed a appropriate ROM
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 06:33 AM ---------- Previous post was at 06:27 AM ----------
Of course your stock rom would have then needed to be rooted
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

heath.bse said:
I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?
Click to expand...
Click to collapse
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy

continual boot loop...tried everything here.
RealPariah said:
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy
Click to expand...
Click to collapse
I got cm10 on for about 20 minutes then CWM updated to 6.x. I flashed a nightly and it's been in a bootloop ever since. However, when I was on CM10 those few brief minutes I could not hear or he heard on a call.
No idea what to do now. I'm stuck on 2.3.6 unless there's some other trick I can do to get this thing to boot...

Why not just try a different rom? Lots of options out there.
Also, watch the dates on the how to's you read. A lot can be outdated.
Sent from my cell phone telephone....

CM11 installation problems

hi,everyone.
i've just tried to install cm11 in my galaxy nexus and it cannot boot on now
its installation is fail because status 7 in the cwm recovery
i still cant boot on my phone
can anyone help me

What version of CWM Recovery are you on? An update of the recovery to a newer build might help.
Break me off a piece of that Kit-Kat ROM!

What version of Android are you coming from? Anytime you are switching to a different ROM, especially from a JellyBean (4.3 or other) to a KitKat 4.4 ROM, you must do a clean wipe of your phone prior to installation. It sounds like you tried to do a dirty flash. Boot into recovery, and format data, cache, and dalvik cache, then try flashing the CM11 and Gapps.
If that doesn't work...try this thread. http://forum.xda-developers.com/showthread.php?t=2302599
tonykunyin said:
hi,everyone.
i've just tried to install cm11 in my galaxy nexus and it cannot boot on now
its installation is fail because status 7 in the cwm recovery
i still cant boot on my phone
can anyone help me
Click to expand...
Click to collapse

dwoods1983 said:
What version of Android are you coming from? Anytime you are switching to a different ROM, especially from a JellyBean (4.3 or other) to a KitKat 4.4 ROM, you must do a clean wipe of your phone prior to installation. It sounds like you tried to do a dirty flash. Boot into recovery, and format data, cache, and dalvik cache, then try flashing the CM11 and Gapps.
If that doesn't work...try this thread. http://forum.xda-developers.com/showthread.php?t=2302599
Click to expand...
Click to collapse
i am coming from the stock android 4.3 rom. I've tried wipe the data,wipe cache and dalvik cache.However,it just keeps saying installation error in the cwm touch recovery because of the status 7.
That method doesnt work for me. i still even cannot boot on my phone.how can i send it in again

OK, first you need to manually boot into your recovery by holding the volume up and down buttons at the same time and then pressing the power button. You should get into your bootloader and then be able choose recovery. I assume you have a backup...so just flash back to your stock android 4.3. Then once you are able to get back into your phone see if you can update your cwm. If updating you cwm turns out not to be the issue then go watch a YouTube video on how to fix the status 7 error. It basically involves copying the zip file you are trying to flash over to your computer and editing one of the files. Goodluck...let me know if this works.
tonykunyin said:
i am coming from the stock android 4.3 rom. I've tried wipe the data,wipe cache and dalvik cache.However,it just keeps saying installation error in the cwm touch recovery because of the status 7.
That method doesnt work for me. i still even cannot boot on my phone.how can i send it in again
Click to expand...
Click to collapse

check your baseband..you should be in the latest radio..mine is XXLH1..other rom required latest baseband..

Pretty sure it sounds like he is on an outdated version of cwm, status 7 errors can be signs of old recovery version. Fastboot flash the latest cwm.

[Q] Bricked GSII SGH-989?

I have a T-Mobile SGH-T989 (Galaxy S2), and for a while I had an ICS darkside ROM on it with CWM 5.0.2.4. This evening, though, I decided to upgrade to an Android KitKat ROM (Beanstalk). I first upgraded CWM to the latest version, and then flashed the ROM. Everything seems to have flashed correctly, and I get the Beanstalk splashscreen, but it never seems to go any further than that. It's hung (for around 30mins) on the Beanstalk splash screen with the beanstalk and rain.
When I go into CWM, I can re-flash just fine, but when I try to do a full wipe or a cache wipe, it also gets hung (I eventually rebooted after about a 10 minute cache wipe attempt). It says that it can't open /cache/recovery/last_install, and that the cache file system is read-only. I also attempted to use the super wipe/cache wipe tools here: http://forum.xda-developers.com/showthread.php?t=2235141&nocache=1 but they also hung.
I'm wondering what the best course of action is at this point? I have a full backup, but since it was made with the previous version of CWM, it also appears to not be working.
Thanks,
~j

jwir3 said:
I have a T-Mobile SGH-T989 (Galaxy S2), and for a while I had an ICS darkside ROM on it with CWM 5.0.2.4. This evening, though, I decided to upgrade to an Android KitKat ROM (Beanstalk). I first upgraded CWM to the latest version, and then flashed the ROM. Everything seems to have flashed correctly, and I get the Beanstalk splashscreen, but it never seems to go any further than that. It's hung (for around 30mins) on the Beanstalk splash screen with the beanstalk and rain.
When I go into CWM, I can re-flash just fine, but when I try to do a full wipe or a cache wipe, it also gets hung (I eventually rebooted after about a 10 minute cache wipe attempt). It says that it can't open /cache/recovery/last_install, and that the cache file system is read-only. I also attempted to use the super wipe/cache wipe tools here: http://forum.xda-developers.com/showthread.php?t=2235141&nocache=1 but they also hung.
I'm wondering what the best course of action is at this point? I have a full backup, but since it was made with the previous version of CWM, it also appears to not be working.
Thanks,
~j
Click to expand...
Click to collapse
When all fails always use ODIN, if you know what you're doing. IDK which ROMs here are flashable via ODIN but use any you can find in the dev section in which somebody has uploaded a flashable .tar version (usually it will be rooted stock). If that doesn't save you, you have big trouble.
Also you should still be able to restore backups between different CWM versions, so yeah there is potentially something wrong with your phone.

[Q] Samsung Galaxy s3 i747 stuck in Cyanogenmod boot screen

Hello:
So I rooted my phone today and I downloaded the app, "ROM Manager," and downloaded a ROM from it, which I read that I'm not supposed to do, afterwards. Now, whenever I turn my phone on, it only shows the Cyanogenmod boot animation. I read in another thread that I should clear the cache, which I did, but it did not help. Should I try and flash it to the stock? Please help! I am inexperienced with this and I don't know what to do. Thanks in advance!

dallinrigby said:
Hello:
So I rooted my phone today and I downloaded the app, "ROM Manager," and downloaded a ROM from it, which I read that I'm not supposed to do, afterwards. Now, whenever I turn my phone on, it only shows the Cyanogenmod boot animation. I read in another thread that I should clear the cache, which I did, but it did not help. Should I try and flash it to the stock? Please help! I am inexperienced with this and I don't know what to do. Thanks in advance!
Click to expand...
Click to collapse
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.

ChinDaChin said:
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.
Click to expand...
Click to collapse
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.

shortydoggg said:
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.
Click to expand...
Click to collapse
I have already tried to clear the cache and the dalvik and then did a reboot but it didn't change anything.

shortydoggg said:
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.
Click to expand...
Click to collapse
ChinDaChin said:
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.
Click to expand...
Click to collapse
I was running the stock jellybean before I installed cryogenmod...my phone is a galaxy s3 it47 (AT&T) network unlocked phone. Also, at the bottom in recovery mode it says
ClockworkMod Recovery v6. 0. 4. 5
I'm not sure whether or not this is important but it is the only thing that I can think of to tell you about my phone.
I don't care whether we keep my data, I just want it to be able to turn on! Can I just restore it using Odin somehow? I tried the wipe user memory option in recovery mode and that didn't help...

Personally, I hate both ROM manager and clockworkmod.
It sounds like you just need to wipe data (or factory reset), cache and dalvik, and then reboot. If that doesn't work, then you might have flashed a version of cyanogenmod that may not be compatible with your bootloader, and may have to manually try another ROM.

shortydoggg said:
Personally, I hate both ROM manager and clockworkmod.
It sounds like you just need to wipe data (or factory reset), cache and dalvik, and then reboot. If that doesn't work, then you might have flashed a version of cyanogenmod that may not be compatible with your bootloader, and may have to manually try another ROM.
Click to expand...
Click to collapse
I tried to do a factory reset, it didn't help as far as I know. How do i manually try another rom?

dallinrigby said:
I tried to do a factory reset, it didn't help as far as I know. How do i manually try another rom?
Click to expand...
Click to collapse
Can you tell us what version of touchwiz you were running before you tried rooting it? It's important if it's past 4.3.x, or before 4.3.x. Do the following if you were running 4.3.x before you rooted.
Go to http://download.cyanogenmod.org/?device=d2att&type=
Choose the one named: cm-10.2.0-d2att.zip
Download it and save it to your SD Card.
Go here and download 10.2: http://wiki.cyanogenmod.org/w/Google_Apps and put it on your SD card with the above .zip.
Once thats done, power off your phone. Go into recovery mode (volume up + home + power).
Wipe Data/Factory Reset
Wipe Cache partition
Advanced -> wipe Dalvik Cache
Go back, and choose Install Zip
Choose zip from /storage/sdcard (find your cm10.2 zip, run it. then run the gapps)
After you "installed" both zips, go back to the main menu and reboot system now
This will be a clean install of 10.2.
FYI: Clockworkmod Recovery is v6.0.4.5, so you have the most up to date.

ChinDaChin said:
Can you tell us what version of touchwiz you were running before you tried rooting it? It's important if it's past 4.3.x, or before 4.3.x. Do the following if you were running 4.3.x before you rooted.
Choose the one named: cm-10.2.0-d2att.zip
Download it and save it to your SD Card.
Once thats done, power off your phone. Go into recovery mode (volume up + home + power).
Wipe Data/Factory Reset
Wipe Cache partition
Advanced -> wipe Dalvik Cache
Go back, and choose Install Zip
Choose zip from /storage/sdcard (find your cm10.2 zip, run it. then run the gapps)
After you "installed" both zips, go back to the main menu and reboot system now
This will be a clean install of 10.2.
FYI: Clockworkmod Recovery is v6.0.4.5, so you have the most up to date.
Click to expand...
Click to collapse
I don't know what version I had. Is there a way for me to tell? I just had whatever I bought it with, I never downloaded anything else.
It says on that second link to download Torrent or via It Vends, is this the right place, and if so what do I pick?
Thanks by the way, also is there a way I could do this with Odin?

dallinrigby said:
I don't know what version I had. Is there a way for me to tell? I just had whatever I bought it with, I never downloaded anything else.
Click to expand...
Click to collapse
I used Goo.im. It's a funky looking website, but it's legitimate. I didn't do this with Odin, I used Cyanogenmod Installer :silly:
If you follow what I posted before, it will update everything, and you will run cyanogenmod 10.2. (What I'm running on my s3). HOWEVER, it will update your phone to 4.3. This means you cannot downgrade it, or it will be bricked. By downgrade, I mean you will not be able to run anything before 4.3. (So you can ONLY install roms that are 4.3, or jellybean).
I'm pretty sure you already updated everything since its stuck in the boot loop.
Any chance you did a nandroid backup(before you did the root)? If not, you've got nothing to lose and might as well go through with CM 10.2 (in my honest opinion).

ChinDaChin said:
I used Goo.im. It's a funky looking website, but it's legitimate. I didn't do this with Odin, I used Cyanogenmod Installer :silly:
If you follow what I posted before, it will update everything, and you will run cyanogenmod 10.2. (What I'm running on my s3). HOWEVER, it will update your phone to 4.3. This means you cannot downgrade it, or it will be bricked. By downgrade, I mean you will not be able to run anything before 4.3. (So you can ONLY install roms that are 4.3, or jellybean).
I'm pretty sure you already updated everything since its stuck in the boot loop.
Any chance you did a nandroid backup(before you did the root)? If not, you've got nothing to lose and might as well go through with CM 10.2 (in my honest opinion).
Click to expand...
Click to collapse
Okay, so now it says Android system recovery <3e> at the top and at the bottom is this:
#MANUAL MODE#
--Applied Multi-CSC...
Applied the CSC-code : ATT
Successfully applied multi-CSC
Then when I pushed install from sdcard it said E:failed to verify whole file signature
Do i need to unzip it?

dallinrigby said:
Okay, so now it says Android system recovery <3e> at the top and at the bottom is this:
#MANUAL MODE#
--Applied Multi-CSC...
Applied the CSC-code : ATT
Successfully applied multi-CSC
Then when I pushed install from sdcard it said E:failed to verify whole file signature
Click to expand...
Click to collapse
Don't lose hope, but every site/page I check, it says the error is with you flashing through Rom Manager. It's okay though, there has to be a solution.
I'm going to continue looking for the solution. If you could try and remember what version of the OS you were running before you tried to root, it would help out SO MUCH!
LOL., I forgot to hit post on this.
And no, don't unzip it. The phone can read it fine.
Anyway, after some quick reading, a few people are saying its either your rom that is corrupted, or you don't have the proper recovery. It can't be the rom, because the rom was downloaded from the source. So chances are its your recovery. I'm not sure if you can download the CWM recovery, and flash it from recovery. (if that makes sense?)

ChinDaChin said:
Don't lose hope, but every site/page I check, it says the error is with you flashing through Rom Manager. It's okay though, there has to be a solution.
I'm going to continue looking for the solution. If you could try and remember what version of the OS you were running before you tried to root, it would help out SO MUCH!
LOL., I forgot to hit post on this.
And no, don't unzip it. The phone can read it fine.
Anyway, after some quick reading, a few people are saying its either your rom that is corrupted, or you don't have the proper recovery. It can't be the rom, because the rom was downloaded from the source. So chances are its your recovery. I'm not sure if you can download the CWM recovery, and flash it from recovery. (if that makes sense?)
Click to expand...
Click to collapse
I don't really understand this stuff very much, and also I am pretty sure my android version before was 4.1.2, that's jelly bean right? is that what you meant?

If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.

audit13 said:
If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.
Click to expand...
Click to collapse
Where do i get TWRP? It doesn't say that I have Clockwork anymore, since I factory reset it

dallinrigby said:
I don't really understand this stuff very much, and also I am pretty sure my android version before was 4.1.2, that's jelly bean right? is that what you meant?
Click to expand...
Click to collapse
Sorry.
I'm kind of conflicted on what's going on with your phone. It is partially a problem with going through Rom Manager to flash cyanogenmod.
audit13 said:
If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.
Click to expand...
Click to collapse
I guess you can try TWRP. I haven't used TWRP so I can't comment on it. I'll try finding an explanatory video that is simple to follow. (Don't throw out Cm10.2, or the gapps. You will need those to get Cyanogenmod on your phone!)

CM13 not booting

After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.

Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.

RDChase said:
Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.
Click to expand...
Click to collapse
Just did it, it still seems to be booting like it previously was. Wiped cache, dalvic, data, and system and then installed CM13 and gapps. Still booting as I write this.

Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.

RDChase said:
Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.
Click to expand...
Click to collapse
I've kind of given up at this point. Even CM12 doesn't work. The only thing that seems to work is the stock rom. My phone is the regular SPH-L710 model. I didn't even know the L710t was a thing.

I have the same problem, and sometimes it boot in the system setup mode, but the sensor is not working, i can turn on airplane mode, reboot or power off, and sensor works, what happend i dont know((

ovil101 said:
After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))

1vankill1 said:
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))
Click to expand...
Click to collapse
That just seems to be a stock rom.

yes it stock rom, after it was installed, I was able to install 13 cm