[Q] No keypad sound in dialer when in call? - Galaxy Note II Q&A, Help & Troubleshooting

I have a N7102 with the stock ROM. When I am in a call, say, calling some customer service number, that will require to enter number on keypad of the dialer to navigator thru the menu, I cannot hear any sound feedback. Before making the call, when enter the phone numbers on the dialer, I can hear the water drop sound. I have checked all places for settings but cannot find any option that seems related to this. It is really wired to hear nothing when touching the keypad. Anyone can help? Is this a ROM problem?

Related

[Q] False redials

I have this weird UI functionality issue where the phone redials the last dialed number exactly when I want to hang up. This actually is not a bug in the system. Its just a design issue.
Here is what happens: I make a call using the dialer. The call connects fine but when I'm about to hang up and if at that instant or just before that, if the person on the other side hangs up, my end key becomes a dial key and a new call is initiated to the same person.
I want to be able to exit the dialer once I hang up a call that I've initiated. Is there a setting for it? Can I do some mod that can allow me to do this?
The same problem isn't noticed with an incoming call. Basically I'm doing something or the phone is idle. Once I'm done with an incoming call, the hang up / end button sends me back to the previous state. This is exactly what I want the outgoing call to do.
Any ideas? Is someone else facing the same issue with some other handset?
I'm on an HTC Desire (Bravo) SLCD with an InsertCoin Sense 2.1 ROM 1.1.4 release.
a temporary workaround is to install a sencondary dailer, so when you do press dial again, it prompts you to choose one, thus preventing the call to go through. Although this can be irritating sometimes.

Dialpad registers double digits when in call

I am running stock rooted Android 2.3.4. My dialpad works except while I am in call - it becomes glitchy. Any numbers I dial on the dialpad while in-call usually registers twice. For example, I work in the hospital and usually need to page someone but when I press keypad during a call to leave numeric #: 12345, it instead leaves 1122334455 or some times 111223445. Tried rebooting, long presses and short presses without any help.
This also happens for anything that requires dialpad during a call: voicemail pin: 1234 but it says invalid "you entered 11223344". It also happens with bank account, calling cards....
My keyboard/dialpad work without problems during regular use.
Tried to use Dialer One app but it pushes me to stock dialpad while in-call. The one app that has worked is TalkaTone VOIP - its uses its own dialpad while in call without problems but its a voip program.
Anyone know of any other dialer apps that uses its own dialpad while in call?
Others had the same problem but no solution:
http://code.google.com/p/ice-cream-sandwich-sgs/issues/detail?id=319
Are you on speaker phone during those calls im not rooted or custom rom but my phone does that while on speakerphone
Sent from my SPH-D710 using xda premium
Tried with and without speakerphone but it didnt work. But I have noticed switching speakerphone on and off sometimes helps with the first few digits but its not gauranteed.
See if this helps:
[HowTo] Make e4gt touch tones work with voice mail and other ivr systems

[Q] DTMF on dialer?

Hey guys, I just purchased my S3 on Friday (decided that I didn't need the S4 and the S3 was only $50) and I've already come across a few things that are annoying, even though I already love the phone.
My main issue at the present, though, is that I'm used to (and prefer) hearing the DTMF tones when I'm dialing a number in the phone app, but I can't find any way to enable that with this phone. Is there a way to change the keypad tone without rooting the device, or is it going to require root to do so?
Thanks in advance for any help.
Go like ur making a phone call when u see the dialer then press the menu u will see ringtone and keypad tones go in there and click to turn it on
WICKED S3
TheRogueX said:
Hey guys, I just purchased my S3 on Friday (decided that I didn't need the S4 and the S3 was only $50) and I've already come across a few things that are annoying, even though I already love the phone.
My main issue at the present, though, is that I'm used to (and prefer) hearing the DTMF tones when I'm dialing a number in the phone app, but I can't find any way to enable that with this phone. Is there a way to change the keypad tone without rooting the device, or is it going to require root to do so?
Thanks in advance for any help.
Click to expand...
Click to collapse
dvtmg704 said:
Go like ur making a phone call when u see the dialer then press the menu u will see ringtone and keypad tones go in there and click to turn it on
WICKED S3
Click to expand...
Click to collapse
To clarify, you can have a bubbly kind of noise when you hit the dialpad, but not DTMF tones. That setting is :
dialer>menu>Call Settings>Ringtones and keypad tones>Keytones
Kind of bugged me at first too, but I got over it
I would guess there must be some third party dialer that gives you DTMF back, but I got used to it pretty quick, especially since i hardly ever make a call from the dial pad any more.
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
I even got the problem that my S4 does not send the dtmf signal. I cannot call a hotline or service number or anything. Most of the hotlines ask for a number to go on...e.g. 1 for English, 2 for German etc.
That's not possible with the S4 due to the bubble sound. I assume you got the same problem with your S3, didn't you?
poit said:
To clarify, you can have a bubbly kind of noise when you hit the dialpad, but not DTMF tones. That setting is :
dialer>menu>Call Settings>Ringtones and keypad tones>Keytones
Kind of bugged me at first too, but I got over it
I would guess there must be some third party dialer that gives you DTMF back, but I got used to it pretty quick, especially since i hardly ever make a call from the dial pad any more.
Click to expand...
Click to collapse
My s3 has dtmf tones, it's under phone>menu>call settings>then scroll down, 3rd option from the bottom. I still have the bubbly sound when dialing but the dtmf tones are still there.
metalfan78 said:
My s3 has dtmf tones, it's under phone>menu>call settings>then scroll down, 3rd option from the bottom. I still have the bubbly sound when dialing but the dtmf tones are still there.
Click to expand...
Click to collapse
Correct!! The bubbly sound is when you first dial. Once connected the dial pad works just fine and the dtmf tones are all there. Any service line that you call that requires dtmf tone work perfectly.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Might turn out that it is just me =)
In the menu, there is not such an entry. There is just Call settings>Ringtones and keypad tones>Keypad tones is checked. It says "Play tones when keypad is pressed. There is no other entry indicating something related to dtmf.
I cannot imagine that it does not work, since it is a very essential function. Am I wrong?
metalfan78 said:
My s3 has dtmf tones, it's under phone>menu>call settings>then scroll down, 3rd option from the bottom. I still have the bubbly sound when dialing but the dtmf tones are still there.
Click to expand...
Click to collapse
Don't go into ringtones & keypads, just scroll down
Tsss...what a f...
I just called a hotline, there was no dtmf signal to navigate through the menu. Afterwards, I turned the background noise reduction of and tried it again. It was working properly and I could navigate through the menu. I turned the background noise reduction on again and it is still working, so there was just a conflict between the signal and the noise reduction....
Damn system LOL I am working on that since Saturday...
Problem solved!

Dialer tones

Has anyone taken the time to fix the dialer tones, not just so it doesn't make the ridiculous drip sound, but so it makes the actual dialing tones when numbers are pressed?
The best you might be able to do is change the drip sounds to another sound, but since it is really simulated, you are not going to be able to make each key give out it's real tones.
More detail.
When you are dialing a number, the numbers you are dialing are not actually sent anywhere until you actually hit the send button. That is how you can backspace out of of what you dialed. So what you are hearing is just feedback to let you know you dialed a number. When you hit send, the numbers you have entered are then sent as the string of codes to the carrier to make the call.
After you have a call going and are connected, any keyboard presses are sent as actual tones to the other side, but even then the tone you hear on your end is a beep with the same sound (not a drip but different) no matter what buttons you press. The proper tones are heard on the other side.
So the best you can do is replace the drip sound with another sound, but it will never be a different tone for each key.

Oneplus 3 Pop sound from speaker

Hi!
Anyone else get a popping sound from speaker when fast dialing someone through dialer? Its a Short pop when i have pressed the name of the person and the phone goes to dial mode.
Edit: Seems to be when the speaker turns on but is Most noticable when dialing someone. Is this normal?

Categories

Resources