Help with resetting a phone to factory settings - Verizon Droid Incredible 2

So I have a Droid incredible 2 that had been dropped in water. It got completely dried out for a couple of days and it was working ok except that sometimes the screen would just shut off randomly. I would hit the power button a couple of times and the screen would come back on and it would work fine again. I got a new phone to replace it anyway. I shut it off, took out the battery, sd card and sim card to put into the new phone. I then turned it back on, and it seemed to boot ok, but once it was completely booted up, the screen was blank. If I hit the power button to wake it up, the screen would turn on for about 1 second and then shut off. Never any longer. I don't need to get the phone back to working condition, I just need to put it back to factory settings. I was planning on selling it on ebay and would like to eliminate any personal info that is on there first. Any way I can do this? The phone is not rooted. Not unlocked, does not have a ROM or any modifications on it. Exactly stock. Please let me know if there is anything I can do. Thanks.

if you hold volume down and power does it load into the boot loader screen? If so you can just select factory reset.

Related

[Q] Phone turning itself off and on again and again.

My phone is acting really strange. It turns itself off and then on again and again in this cycle as if the power button is always being pressed.
I can sometimes get into my recovery (CWM) but when I try to go deeper into the menu. I get kicked back to the main screen as if im pressing the power button to go "back" until the phone gets completely turned off again.
I noticed something too. When I pull out the battery and put it back on. The phone turns itself on without me even pressing the power button. Then the cycle continues again.
Very frustrating.
Could this be software, ROM, recovery, partition related or does this sound something hardware related?
EDIT:
I think this guy is having the same problem as me. Weird.
http://forum.xda-developers.com/showthread.php?t=2557537
Quick update in case someone bumps into the same problem.
I just got back from the repair shop. The power switch was indeed broken. The technician replaced it with a new one and the phone works fine one.

[Q] Please help! Random power off won't boot!

Okay I will try to sum this up. My S3 was working fine and everything randomly I noticed issues with battery calibration It would be 100% then I would calibrate it and then unplug and then I'd instantly drop to 85%. Thought It was a battery issue and made a point to get a new one later. Then it kept working for another month or so then It started really screwing up the shutdown menu would randomly pop up and I'd back out of it.
Then randomly 3 seconds later the phone reboots. And it would keep doing that randomly I thought it might be a power button issue. Then as time goes on it got really bad to where it would simply reboot and not make it past the bootloader, It would not "reboot" more like a complete shutdown then I'd have to power it again and have it do the same thing. Seeing how I could not even make it past the bootloader I got a new battery, waited a week for it and then I put it in and the same issue happened. It would not get past the bootloader.
So I kept trying and trying and trying and it finally booted past that. And it stayed on for a whole night. I did everything on it I normally would and it was working great. Then the battery was getting low so I plug it in and was going to calibrate it after it was charged, I go back to it and it's dead again won't get past the bootloader once again. I'm completely out of ideas on how to fix this I pop'd off the button and blew in there and the button seems fine and everything still no change. I also can not get into recovery. It trys and loads but then shuts off. Anyway if anyone has any ideas on what this is or how to fix please help! I need my phone back! Thank you.
I'm running MOAR Lite version.
UPDATE: Took the phone apart and took a close look at the button it looks 100% fine...I saw a video on youtube that requires you to complete tear the button off and it works. But I don't know if the button is my main cause of this issue or if it will actually work. Some says it works, some says it does nothing...Please let me know thanks...
UPDATE 2: It will show that battery with spinning circle in it for like 1 second then turn off again. (When it is plugged in)
That's odd. But when it comes to the power button, dismantling and what not 90% of the time will show 0 issues. It will look perfectly fine when it's not. You playing with the power button I assume were pressing hard and normally to try testing it. It's a common issues on this version of the S3 to have faulty power button and you would need to get it repaired. Odly even slightly atmospheric changes can cause it to act different at different points. Some days it works fine, other days a very slight brushing over can cause it to screw up and trigger a manual shut down (holding for like 10 or 15 seconds).
Assuming that it is the power button, or to try, just do a variation of things to the power button itself. Use your finger nail to jiggle it around with different pressures. During boot if it shuts off, it could be the power button internally stuck, just jiggle it around.
This is all I can think of unless you bring it in to get repaired.
I was encountering the exact same problem. I would try to get into download mode and it would sit at the "Downloading" screen for about 5-7 seconds then the display would go blank. It won't make it into recovery either. Based on the above recommendation I took the whole phone apart and sprayed a lot of compressed air directly on the power button mechanism and the plastic case pressing the button in. I didn't see anything broken with the button when I did that.
It seems to be working now, I can boot into my Rom. Don't know how long this fix will last.

[Q] Galaxy S3 Hyper-sensitive Power Button

Good Morning everyone. I am new to Android Central. I have never had any issues with my G3 prior to yesterday. I was using the phone all day no issues and then suddenly I went to press the power button to check my email and barn it rebooted so I thought it was just a random crash and was ready to move on. When it came back up (restarted) initially I was able to access it. Once the screen dimmed and turned off I tried to press the power button to turn it back on and it vibrated and rebooted again. I tried removing the battery for a couple minutes places it back in and then trying again. Same result. I removed the case and the back panel and noticed that simply putting my finger anywhere near the power button even on the black plastic near it caused it to be activated. Most of the time by the time it reboot it shuts back down. There was a couple times I was able to keep it running. Now being one of those. I backed up my files and did some reading but wanted to get some feedback specific to my situation. Any help would be wonderful and please let me know if you need more information I would be happy to provide.
Sounds like your power button is starting to fail and needs to be replaced, mine did the same thing. You can usually get that fixed relatively cheap.

Need help fixing 5x with glitching screen

What happened is that i opened an app and then the phone went to sleep, when I unlocked it the screen started to glitch and appear to pressing on the screen for itself. I tried pressing the home button but it was lagging and nothing really happened so I held down the power button and reset the phone. When the phone booted back up and I had to enter my screen lock, I noticed that it wasn't corresponding with where I was pressing, also I pressed on the screen with a quick touch, it appeared that multiple touches registered all over the screen. Since I couldn't get past the screen lock, I turned off the phone, went into Recovery and factory reset the phone. Even after the factory reset, the problem persists so I can't even go through the setup wizard. The phone is completely stock by the way, is there any way to fix this? Or am I going to have to send it back?

Tab S4 WiFi - Screen not turning back on after timeout. Tablet still running.

Basically most of the post in the title.
I've been playing around, got it rooted with WETA, installed Kali, went back to Stock. In both Kali and now Stock, if the screen times out, or if I hit the power button to lock the screen, it will not come back up and only a hard reboot will get it back.
Same here. I’m rooted but stock rom. Been rooted for a while but this problem only started within last few days. Same exact issue. Booted into safe mode and problem still exists: if screen gets turned off or times out, can not get it to turn back on without hard reset.
I just factory reset mine. I use it for work so I wanted to see if I could reset and restore. During the setup process when it asked for the wifi password I went to the other office to get it and by the time I came back, the screen had timed out and would not come back on still. So, tells me it is not an app and is likely a hardware issue.
Edit: Well, now it seems to be working. I let it sit and restore for a while. Tried to turn the screen on and it took a bit longer than normal but it came on. So far it does not turn the screen on with a screen tap like it used to but it will turn on with a little delay after pressing the power button...
Update on my update: Tablet still has times where pushing the power button or tapping the screen does not turn it on. I basically have to make the motions as if I am opening the magnet case up and the screen will turn on. So, not all the way fixed...

Categories

Resources