Develop Bugs

Installing Clockwork Recovery

Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You

mfredy said:
Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You
Click to expand...
Click to collapse
Are your drivers installed already?

bananagranola said:
Are your drivers installed already?
Click to expand...
Click to collapse
Yh, I have installed all the latest driversss

mfredy said:
Yh, I have installed all the latest driversss
Click to expand...
Click to collapse
Is your phone in debug mode?

bananagranola said:
Is your phone in debug mode?
Click to expand...
Click to collapse
yupppppppppppp

mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
No idea then. Post the entire log.

mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
Were your drivers installed with the phone unplugged?

-Check your data-sync cable,It should not only allow your device to charge but also data-sync.( Try with another data-sync cable)
-As you stated drivers are installed.Then when you're on bootloader,It should show HBOOT-USB. If that shows than try doing same thing again.
Or else follow simple steps below:
-Copy CWM recovery.img into fastboot files.
-Unplug your device if connected to computer.
-Manually power off your device.
-Press Volume down + Power button,It will redirect into hboot.
-Select Bootloader by clicking on power button,It will change color of HBOOT from Blue to Red.
-Next thing you'll notice that it stated as HBOOT USB.
-Put your phone on side and do same commands fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
-Fastboot reboot.
Once process been done. Unplug it and boot device normally. And to check whether there's a recovery.img installed or not,Just power off your device and put on charge. In CWM it will redirect your into recovery mode while device is switched off.

4EXT Recovery Touch
Try 4EXT Recovery Update , install app , download 4EXT Recovery . Done

[TUT][Normal and PDANET Method] YUREKA-UNLOACK BOATLOADER, FLASH RECOVERY, ROOT

YU(YUREKA) - UNLOCK BOOTLOADER, FLASHING CUSTOM RECOVERY, ROOTING (NORMAL AS WELL AS PDANET METHOD)​
EXPLORE UNLIMITED POSSIBLITIES BY ROOTING YOUR DEVICE
ROOTING DOESN'T VOID YOUR YUREKA's WARRENTY
INSTRUCTIONS FOR
[ 64-Bit ] OFFICIAL STOCK CM12s (LOLLIPOP)​METHOD - 1 (NORMAL)
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
adb.zip : DOWNLOAD HERE
SuperSU.zip : DOWNLOAD HERE
TWRP Recovery :DIRECT LINK ..............OFFICIAL POST
CMW Recovery : DIRECT LINK ..............OFFICIAL POST
Download adb.zip file and extract it in your PC path C:/ADB
now place CWM recovery : "cwm_recovery.img" [or] TWRP recovery : "twrp_recovery.img" in that ADB folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> Now copy SuperSu.zip in Root of the SDcard in your device
-> Now Turn off the device and connect mobile to PC using USB cable
-> Now at the top you can see RED led glowing. Once you observe it keep pressing the Volume up rocker button and your device will move to fastboot mode.
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
NOTE: If U are facing issue like "waiting for device" when U type the command then please follow METHOD 2
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery cwm_recovery.img[/SIZE]
this will flash cwm recovery.
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf flash twrp_recovery.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "cwm_recovery.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed CWM or TWRP custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest CWM recovery which works on both touch interface as well as device hard keys.
TO ROOT YOUR DEVICE
-> Place "SuperSu.zip" in your internal or external Sd card
-> reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the SuperSu.zip
that's it now your device has been rooted
For those who are facing Device Detection issue on adb​METHOD - 2 (USING PDANET SOFTWARE)
.​Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
db.zip : DOWNLOAD HERE
SuperSU.zip : DOWNLOAD HERE
TWRP Recovery :DIRECT LINK ..............OFFICIAL POST
CMW Recovery : DIRECT LINK ..............OFFICIAL POST
PdaNet mobile app : DOWNLOAD HERE
PdaNet PC application : DOWNLOAD HERE
Download adb.zip file and extract it in your PC path C:/ADB
now place CWM recovery : "cwm_recovery.img" [or] TWRP recovery : "twrp_recovery.img" in that ADB folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> Download and install PdaNet mobile app : https://play.google.com/store/apps/details?id=com.pdanet
-> enable usb debugging in setting -> Developer options -> Mark ADB debugging and USB debugging
-> Install PdaNet software in PC : http://pdanet.co/a/
-> when PdaNet software in PC requested to connect mobile Keep mobile TURN ON and connect it using USB cable.
-> it will install the device drivers automatically, if already installed select reinstall option
-> Now unplug the device from USB cable
-> Now reboot PC as well as mobile
-> now keep mobile TURN ON and connect mobile to PC using USB cable
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]adb devices[/SIZE]
if device is displaying in command window then type next command otherwise try reinstalling PdaNet in PC and mobile as well.
Code:
[SIZE="4"]adb reboot-bootloader[/SIZE]
then the devices goes to fastboot mode which is showing in the screen.
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery cwm_recovery.img[/SIZE]
this will flash cwm recovery.
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf flash twrp_recovery.img[/SIZE]
this will flash TWRP recovery.
Note : if you download any other custom recovery which is named differently just replace "cwm_recovery.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed CWM or TWRP custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest CWM recovery because which works on both touch interface as well as device hard keys
TO ROOT YOUR DEVICE
-> Place "SuperSU.zip" in your internal or external Sd card
->reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
INSTRUCTIONS FOR
[ 32 Bit ] OFFICIAL STOCK CM11s (KITKAT)​METHOD - 1 (NORMAL)
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU :DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that ADB folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> keep mobile Turn off and connect mobile to PC using USB cable
-> Now at the top you can see RED led glowing. Once you observe it keep pressing the Volume up rocker button and your device will move to fastboot mode.
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
NOTE: If U are facing issue like "waiting for device" when U type the command then please follow METHOD 2
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf boot recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz which works on both touch interface as well as device hard keys.
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
-> reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
For those who are facing Device Detection issue on adb​METHOD - 2 (USING PDANET SOFTWARE)
.​Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU : DOWNLOAD HERE
PdaNet mobile app : DOWNLOAD HERE
PdaNet PC application : DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> Download and install PdaNet mobile app : https://play.google.com/store/apps/details?id=com.pdanet
-> enable usb debugging in setting -> Developer options -> Mark ADB debugging and USB debugging
-> Install PdaNet software in PC : http://pdanet.co/a/
-> when PdaNet software in PC requested to connect mobile Keep mobile TURN ON and connect it using USB cable.
-> it will install the device drivers automatically, if already installed select reinstall option
-> Now unplug the device from USB cable
-> Now reboot PC as well as mobile
-> now keep mobile TURN ON and connect mobile to PC using USB cable
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]adb devices[/SIZE]
if device is displaying in command window then type next command otherwise try reinstalling PdaNet in PC and mobile as well.
Code:
[SIZE="4"]adb reboot-bootloader[/SIZE]
then the devices goes to fastboot mode which is showing in the screen.
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf boot recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz because which works on both touch interface as well as device hard keys
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
->reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
Credits:
RDS for [64-Bit Rooting original post]
PRATHAM for 64-Bit CWM Recovery
@Santhosh M for 32-bit Philz Recovery & 64-bit TWRP recovery
@vishal_android freak for [32-Bit Rooting original post]
@[SIZE="4"]TechnoTrons(me)[/SIZE] for making this tutorial noob friendly

Reserved
Sent from my YUREKA using XDA Free mobile app

@TechnoTrons nice and thank you..but its not ctrl+right click...its shift+right click....so pls change it...
btw win 8.1 x64 users need to disable signature verification and here tut link add it also
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/

ansebovi said:
@TechnoTrons nice and thank you..but its not ctrl+right click...its shift+right click....so pls change it...
btw win 8.1 x64 users need to disable signature verification and here tut link add it also
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Click to expand...
Click to collapse
Thank u
Now edited ......:thumbup:
Sent from my YUREKA using XDA Free mobile app

thnx alot.i was trying this for more than 2 hours.but your pda method worked.
TechnoTrons said:
YU(YUREKA) - UNLOCK BOOTLOADER, FLASHING CUSTOM RECOVERY, ROOTING (NORMAL AS WELL AS PDANET METHOD)​
EXPLORE UNLIMITED POSSIBLITIES BY ROOTING YOUR DEVICE
ROOTING DOESN'T VOID YOUR YUREKA's WARRENTY​
METHOD - 1 (NORMAL)​
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU :DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that ADB folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> keep mobile Turn off and connect mobile to PC using USB cable
-> Now at the top you can see RED led glowing. Once you observe it keep pressing the Volume up rocker button and your device will move to fastboot mode.
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
NOTE: If U are facing issue like "waiting for device" when U type the command then please follow METHOD 2
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz which works on both touch interface as well as device hard keys.
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
-> reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
For those who are facing connection issue between your PC and mobile follow​METHOD - 2 (USING PDANET SOFTWARE)​
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU : DOWNLOAD HERE
PdaNet mobile app : DOWNLOAD HERE
PdaNet PC application : DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> Download and install PdaNet mobile app : https://play.google.com/store/apps/details?id=com.pdanet
-> enable usb debugging in setting -> Developer options -> Mark ADB debugging and USB debugging
-> Install PdaNet software in PC : http://pdanet.co/a/
-> when PdaNet software in PC requested to connect mobile Keep mobile TURN ON and connect it using USB cable.
-> it will install the device drivers automatically, if already installed select reinstall option
-> Now unplug the device from USB cable
-> Now reboot PC as well as mobile
-> now keep mobile TURN ON and connect mobile to PC using USB cable
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]adb devices[/SIZE]
if device is displaying in command window then type next command otherwise try reinstalling PdaNet in PC and mobile as well.
Code:
[SIZE="4"]adb reboot-bootloader[/SIZE]
then the devices goes to fastboot mode which is showing in the screen.
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz because which works on both touch interface as well as device hard keys
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
->reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
Credits:
@vishal_android freak for his original post & superuser.zip
@Santhosh M for Philz Recovery
@[SIZE="4"]TechnoTrons(me)[/SIZE] for making this tutorial noob friendly
Click to expand...
Click to collapse
thnx alot.i was trying this for more than 2 hours.but your pda method worked

Thanks
Thanks the first method worked for me. But there is one problem everything is done successfully but I am not able to boot in Philz recovery by pressing vol up and down key with power key. It boots to stock recovery.
Then I used the command of fastboot to boot in philz recovery. It booted in that but it doesnt boots while pressing the vol up and down key with power key simultaneously. Any idea why its not booting?
Thanks

TechnoTrons said:
YU(YUREKA) - UNLOCK BOOTLOADER, FLASHING CUSTOM RECOVERY, ROOTING (NORMAL AS WELL AS PDANET METHOD)​
EXPLORE UNLIMITED POSSIBLITIES BY ROOTING YOUR DEVICE
ROOTING DOESN'T VOID YOUR YUREKA's WARRENTY​
METHOD - 1 (NORMAL)​
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU :DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that ADB folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> keep mobile Turn off and connect mobile to PC using USB cable
-> Now at the top you can see RED led glowing. Once you observe it keep pressing the Volume up rocker button and your device will move to fastboot mode.
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
NOTE: If U are facing issue like "waiting for device" when U type the command then please follow METHOD 2
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf boot recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz which works on both touch interface as well as device hard keys.
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
-> reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
For those who are facing connection issue between your PC and mobile follow​METHOD - 2 (USING PDANET SOFTWARE)​
Requirements :
Laptop or Desktop with windows OS
USB Data cable
Files Required:
ADB.zip : DOWNLOAD HERE
Philz Recovery : DOWNLOAD HERE
SuperSU : DOWNLOAD HERE
PdaNet mobile app : DOWNLOAD HERE
PdaNet PC application : DOWNLOAD HERE
Download ADB zip file and extract it in your PC path C:/ADB
now place philz recovery : "recovery_yuphilz.img" in that folder
WARNING:
-> Unlocking bootloader will erase all your data. So backup your data before unlocking bootloader
PROCEDURE :
-> Download and install PdaNet mobile app : https://play.google.com/store/apps/details?id=com.pdanet
-> enable usb debugging in setting -> Developer options -> Mark ADB debugging and USB debugging
-> Install PdaNet software in PC : http://pdanet.co/a/
-> when PdaNet software in PC requested to connect mobile Keep mobile TURN ON and connect it using USB cable.
-> it will install the device drivers automatically, if already installed select reinstall option
-> Now unplug the device from USB cable
-> Now reboot PC as well as mobile
-> now keep mobile TURN ON and connect mobile to PC using USB cable
-> Now navigate to ADB folder c:/ADB
-> Now open adb terminal by "shift + right click" and select "open command prompt here"
Now follow these steps in adb terminal:
Code:
[SIZE="4"]adb devices[/SIZE]
if device is displaying in command window then type next command otherwise try reinstalling PdaNet in PC and mobile as well.
Code:
[SIZE="4"]adb reboot-bootloader[/SIZE]
then the devices goes to fastboot mode which is showing in the screen.
Code:
[SIZE="4"]fastboot -i 0x1ebf oem unlock[/SIZE]
this command will unlocks your bootloader.
Code:
[SIZE="4"]fastboot -i 0x1ebf flash recovery recovery_yuphilz.img[/SIZE]
[OR]​
Code:
[SIZE="4"]fastboot -i 0x1ebf boot recovery_yuphilz.img[/SIZE]
this will flash philz recovery.
Note : if you download any other custom recovery which is named differently just replace "recovery_yuphilz.img" to ur recovery name "your_recovery.img" without quotes in above command.
Code:
[SIZE="4"]fastboot -i 0x1ebf reboot[/SIZE]
this will reboot your device.
that's it now your bootloader as been unlocked and installed philz custom recovery
NOTE: In this stage i suggest you take full nandroid backup which is very very very useful in future and dont delete that backup ever.
i always suggest philz because which works on both touch interface as well as device hard keys
TO ROOT YOUR DEVICE
-> Place "UPDATE-SuperSU-v2.45.zip" in your internal or external Sd card
->reboot to recovery and select install zip from storage and browse to the folder where you have downloaded the superuser.zip
that's it now your device has been rooted
Credits:
@vishal_android freak for his original post & superuser.zip
@Santhosh M for Philz Recovery
@[SIZE="4"]TechnoTrons(me)[/SIZE] for making this tutorial noob friendly
Click to expand...
Click to collapse
Followed all steps as mentioned....
Bootloader was unlocked
but when i try to reboot into recovery it reboots into stock recovery...
after that i tried flashing the super su zip through the stock recovery it shows error while installing
"E:failed to verify whole-file signature
E:signature verification failed"
Installation aborted.

amardeep434 said:
Followed all steps as mentioned....
Bootloader was unlocked
but when i try to reboot into recovery it reboots into stock recovery...
after that i tried flashing the super su zip through the stock recovery it shows error while installing
"E:failed to verify whole-file signature
E:signature verification failed"
Installation aborted.
Click to expand...
Click to collapse
I think u want to root ur device after ota update r8
Even I faced the problem in flashing recovery after ota update
So follow these steps to root ur device
-Use this command to flash ur recovery
Code:
fastboot -i 0x1ebf boot recovery_yuphilz.img
-After that ur device automatically reboots into recovery
-now flash supersu zip
-now reboot ur phone
- install flashify from play store
-copy the recovery.IMG to ur phone memory
-flash recovery.img using flashify software
-now reboot that's it
Sent from my AO5510 using XDA Free mobile app

TechnoTrons said:
I think u want to root ur device after ota update r8
Even I faced the problem in flashing recovery after ota update
So follow these steps to root ur device
-Use this command to flash ur recovery
Code:
fastboot -i 0x1ebf boot recovery_yuphilz.img
-After that ur device automatically reboots into recovery
-now flash supersu zip
-now reboot ur phone
- install flashify from play store
-copy the recovery.IMG to ur phone memory
-flash recovery.img using flashify software
-now reboot that's it
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
yes i did the ota update but
there wasnt any error regarding recovery ..but even after flashing the custom recovery it always booted into stock cm recovery..
the above error was in installing super su zip using stock cm recovery..

raman_ said:
Thanks the first method worked for me. But there is one problem everything is done successfully but I am not able to boot in Philz recovery by pressing vol up and down key with power key. It boots to stock recovery.
Then I used the command of fastboot to boot in philz recovery. It booted in that but it doesnt boots while pressing the vol up and down key with power key simultaneously. Any idea why its not booting?
Thanks
Click to expand...
Click to collapse
Even I faced same issue after ota update
Did u successfully rooted ur device
If rooted
Flash recovery.img once again using flashify app which is available in play store
This will solve ur problem
Sent from my AO5510 using XDA Free mobile app

amardeep434 said:
yes i did the ota update but
there wasnt any error regarding recovery ..but even after flashing the custom recovery it always booted into stock cm recovery..
the above error was in installing super su zip using stock cm recovery..
Click to expand...
Click to collapse
Yes it won't show any kind errors
But recoveries are not at all flashing after ota update using adb
So follow above steps
The above given code will redirect u to recovery only once
At that time flash the supersu.zip. so that device get rooted
After that use flashify app to flash custom recovery for using multiple times
Sent from my AO5510 using XDA Free mobile app

TechnoTrons said:
Even I faced same issue after ota update
Did u successfully rooted ur device
If rooted
Flash recovery.img once again using flashify app which is available in play store
This will solve ur problem
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you so much brother!!
Everything worked perfectly now!!

TechnoTrons said:
Yes it won't show any kind errors
But recoveries are not at all flashing after ota update using adb
So follow above steps
The above given code will redirect u to recovery only once
At that time flash the supersu.zip. so that device get rooted
After that use flashify app to flash custom recovery for using multiple times
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks bro but one more question do we have to flash everytime we have to boot into the custom recovery?

raman_ said:
Thanks bro but one more question do we have to flash everytime we have to boot into the custom recovery?
Click to expand...
Click to collapse
No don't need to flash recovery every time
Just flash the recovery after rooting using flashify app
Then onwards you don't need flash again and again
Sent from my AO5510 using XDA Free mobile app

OK thanks for the help. BTW any idea why battery is draining so quickly even after flashing Sudeep bros First kernel? I am on stock ROM and followed the procedure mentioned in his post.
Sent from my AO5510 using xda premium

raman_ said:
OK thanks for the help. BTW any idea why battery is draining so quickly even after flashing Sudeep bros First kernel? I am on stock ROM and followed the procedure mentioned in his post.
Sent from my AO5510 using xda premium
Click to expand...
Click to collapse
Even I'm using it
Not only drains battery but also heats like hell
So better u revert back to stock kernel
Sent from my AO5510 using XDA Free mobile app

Thanks OP! The second method worked for me. The first kept giving me the error "Device not found." I was on Win 10 x64.

have a question
Thanks dude i have done with the process using method 2 and i have a question will i get the OTA update as now my phone is rooted and boot-loader unlocked

zaro143 said:
Thanks dude i have done with the process using method 2 and i have a question will i get the OTA update as now my phone is rooted and boot-loader unlocked
Click to expand...
Click to collapse
U need stock recovery to update
Place the stock recovery in sd card and
Just flash the stock recovery using flashify app available in play store and update
That's it
Now you can update
Sent from my AO5510 using XDA Free mobile app

TechnoTrons said:
U need stock recovery to update
Place the stock recovery in sd card and
Just flash the stock recovery using flashify app available in play store and update
That's it
Now you can update
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, thanks
1. so if i flash Stock recovery whether my root will get disturbed ?
2. Stock recovery download link i could not find in the forum
3. If i flash stock recovery whether i will get the OTA update from Cyanogen ?

[Guide][Recovery] Installing Twrp 3.0.0 and Rooting

This is a guide on how to use the newest TWRP that is compatible being flashed to recovery
This requires s-off and unlocked bootloader, if your boot loader is locked follow this guide steps 2 and 5 to 17: http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
1. Download this file and save in your adb/fastboot folder https://drive.google.com/open?id=0B6qqU5WVQ2khMVRMSUhOUWY3WU0
2. Enable adb on your phone.
3. Press shift+right click in blank space of adb/fastboot folder and select open command terminal here
4. Type adb reboot download
*phone reboot to download mode*
5. fastboot devices
*htv31 appears*
6. Type fastboot flash recovery b3twrp3.0.0.img
7. Press power button then use volume - to highlight reboot bootloader and press power to select
8. Use vol- scroll to reboot recovery select with power button
*HTC non official warning, then twrp*
9. Go to backup and create a backup on external storage (preferably)
10. Download this file and place on sd card: https://download.chainfire.eu/921/SuperSU
11. Navigate to install and then navigate to the su zip and flash it.
12. Reboot and you have root with most recent binaries.
Credit for twrp build goes to @ boa19861105

I can even flash supersu and xposed framework in relocked bootloader, so no wipe in the rooting process.
P.S. Thanks for the great guide for converting to TW rom and rooting!

need someone test this version of TWRP recovery
https://github.com/sabpprook/android_device_htc_b3tuhl/releases/download/3.0.2-0/twrp-3.0.2-0-b3.img
My Github: https://github.com/sabpprook/android_device_htc_b3tuhl

This methode work with b 2?for sure..change step 6 .img with b2,thanks

Sometimes I lost root after reboot. How to fix this?

Guide [how to root] htc one e9s [mt6752][twrp]

PROCEDURE
A. UNLOCK THE BOOTLOADER
(This will wipe you data)
1. Register for an account at HTCdev.com
2. Visit this link http://www.htcdev.com/bootloader/
3. On Select Your device option, Choose All Other Supported Models
4. Follow all the steps and you will succeed to unlock the bootloade
B. FLASHING TWRP
1. Downlaod TWRP recovery from here https://mega.nz/#!4wk0Vbgb!Cg86YCp65NOFh86TkL6QfrsqbPDG-ZK_DYEIOFgJN6Q
2. Download mini-Sdk mini-sdk
3. Extract it
4. Open command prompt(Click in the extracted folder and press shift and right click then choose to open command prompt here)
5. Boot phone into Download mode by switching off the phone then hold power and volume down buttons
and connect to PC with a USB cable
6. On the command prompt, Type: fastboot flash recovery <name of recovery.img>
example: fastboot flash recovery twrp_e9s.img
7. Reboot Bootloader==> Reboot recovery
C. TO ROOT
Download UPDATE-SuperSU-v2.65-20151226141550.zip and install in recovery mode

The links are not working
The Mega links are not working.

Asus Zenfone 4 selfie Lite(ZB553KL) BOOTLOADER UNLOCKER

Hello everyone. Asus have recently released the bootloader unlocker for zenfone 4 selfie lite. So guys its time for the pro users to switch to custom roms according to their choice. If you want the bootloader unlocker then download it from the link below:
ZENFONE 4 SELFIE LITE BOOTLOADER UNLOCKER

stock recovery
plz upload the stock recovery for zenfone 4 selfie lite.. i need it

Help me, how to install twrp. On my zb553kl
Help me, how to install twrp. On my zb553kl

snoopy_042981 said:
Help me, how to install twrp. On my zb553kl
Click to expand...
Click to collapse
Note: This will void the warranty of your device and can also brick your device. Do it at your own risk.
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img

snoopy_042981 said:
Help me, how to install twrp. On my zb553kl
Click to expand...
Click to collapse
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img

I forgot to tell you
I have already use ur bootloader unlocker.apk and my fone its already unlock the bootloader. It is ok to install the twrp and how?

And i dont have yet the TWRP Recovery ZB553KL, coz dosent have an official version on my model? What can i do?
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
thank u for helping me (Devc100)

snoopy_042981 said:
And i dont have yet the TWRP Recovery ZB553KL, coz dosent have an official version on my model? What can i do?
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
thank u for helping me (Devc100)
Click to expand...
Click to collapse
You have to wait, till there is a recovery for ZD553KL atleast.

wrong signatures image error
i got wrong signature img error in this
Devc100 said:
Note: This will void the warranty of your device and can also brick your device. Do it at your own risk.
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse

snoopy_042981 said:
I have already use ur bootloader unlocker.apk and my fone its already unlock the bootloader. It is ok to install the twrp and how?
Click to expand...
Click to collapse
may i know your firmware version, i try to unlock via app but after reboot still same