Hello Experts
Can any one pls help me
I've HTC Desire HD I've flashed it with custom rom after that it stuck on HTC logo
Any solution pls
mdshad1 said:
Hello Experts
Can any one pls help me
I've HTC Desire HD I've flashed it with custom rom after that it stuck on HTC logo
Any solution pls
Click to expand...
Click to collapse
Are you S-OFF and rooted with the Hack Kit or have an unlocked bootloader? What rom did you flash? Have you done a full wipe before flashing?
nearly the same Problem
Hello there, I'm having the same Problem. Stucking at the Splash Logo HTC.
I got this DHD from a friend he means "You got the same one, take a look at it please fix it. ....."
I think he also tried to flash it. But he didnt say or give any thing else.
I was walking around in several Forum but didnt get any kind of results.
But i can give some more information:
I can go to the Bootloader, thats what he said:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
...
Fastboot
Recovery
Factory Reset
Simlock
Image CRC
---- ----
Image CRC didn't point errors just checksum.
---- -----
fastboot getvar all get this:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.52.27
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.161.5
INFOserialno: *******
INFOimei: *******
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP102
INFObattery-status: good
INFObattery-voltage: 4040mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.020s
--- ---
It would be very kind if one of you kould get me some help if possible
Thanks!
twomiothandroiduser said:
Hello there, I'm having the same Problem. Stucking at the Splash Logo HTC.
I got this DHD from a friend he means "You got the same one, take a look at it please fix it. ....."
I think he also tried to flash it. But he didnt say or give any thing else.
I was walking around in several Forum but didnt get any kind of results.
But i can give some more information:
I can go to the Bootloader, thats what he said:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
...
Fastboot
Recovery
Factory Reset
Simlock
Image CRC
---- ----
Image CRC didn't point errors just checksum.
---- -----
fastboot getvar all get this:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.52.27
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.161.5
INFOserialno: *******
INFOimei: *******
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP102
INFObattery-status: good
INFObattery-voltage: 4040mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.020s
--- ---
It would be very kind if one of you kould get me some help if possible
Thanks!
Click to expand...
Click to collapse
how are you trying to flash a custom ROM without being S-off or having unlocked the bootloader?
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Are you S-OFF and rooted with the Hack Kit or have an unlocked bootloader? What rom did you flash? Have you done a full wipe before flashing?
Click to expand...
Click to collapse
thanx
I've flashed with cygenmod n my phone is rooted n i dont know that it was S-OFF or not
so pls help me fix my problem
glevitan said:
how are you trying to flash a custom ROM without being S-off or having unlocked the bootloader?
Click to expand...
Click to collapse
My friend told me he was performing an Update and after that it didn't come up.
If i try to use the recovery mode it gives an error even if i dont touch any thing (except volup + down + power) E: Can't open /cache/recover/command.
I thought if i could get an update.zip and could update via "Apply update from SDCARD"
twomiothandroiduser said:
My friend told me he was performing an Update and after that it didn't come up.
If i try to use the recovery mode it gives an error even if i dont touch any thing (except volup + down + power) E: Can't open /cache/recover/command.
I thought if i could get an update.zip and could update via "Apply update from SDCARD"
Click to expand...
Click to collapse
bro i've done same process as u told above after doing this method my Desire HD stuck on HTC boot logo
So bro pls tell any solution
mdshad1 said:
thanx
I've flashed with cygenmod n my phone is rooted n i dont know that it was S-OFF or not
so pls help me fix my problem
Click to expand...
Click to collapse
Reboot holding power and volume-down to get to hboot. Look there. Are you S-Off?
twomiothandroiduser said:
My friend told me he was performing an Update and after that it didn't come up.
If i try to use the recovery mode it gives an error even if i dont touch any thing (except volup + down + power) E: Can't open /cache/recover/command.
I thought if i could get an update.zip and could update via "Apply update from SDCARD"
Click to expand...
Click to collapse
What error? Which update file? Is he rooted or S-Off or unlocked?
bananagranola said:
What error? Which update file? Is he rooted or S-Off or unlocked?
Click to expand...
Click to collapse
As i posted above:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
--> not root not s-off nor unlocked.
The error you quoted:
E: Can't open /cache/recover/command.
This message occured when i enter the recovery menu with (vol down + up + power) after entering hboot
I dont know which update but i thing it has been the official update from Vodafone (service provider) itself. (Android 2.3x ) ?!?
twomiothandroiduser said:
As i posted above:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
--> not root not s-off nor unlocked.
The error you quoted:
E: Can't open /cache/recover/command.
This message occured when i enter the recovery menu with (vol down + up + power) after entering hboot
I dont know which update but i thing it has been the official update from Vodafone (service provider) itself. (Android 2.3x ) ?!?
Click to expand...
Click to collapse
That is why you are stuck.You are not S-OFF nor Unlocked, so it will be impossible to write partitions in that state. Flash a RUU and that will fix the problem or unlock the bootloader, flash CWM recovery and then a custom rom. That is up to you...
glevitan said:
That is why you are stuck.You are not S-OFF nor Unlocked, so it will be impossible to write partitions in that state. Flash a RUU and that will fix the problem or unlock the bootloader, flash CWM recovery and then a custom rom. That is up to you...
Click to expand...
Click to collapse
Hi, thanks for that,
The question is which RUU.
I found this HOW2 : http://forum.xda-developers.com/showthread.php?t=841890 I need to do whats written there right but they say i need a gold card for RUU flashing?
If that will work would be perfekt!
Thanks for all!
twomiothandroiduser said:
Hi, thanks for that,
The question is which RUU.
I found this HOW2 : http://forum.xda-developers.com/showthread.php?t=841890 I need to do whats written there right but they say i need a gold card for RUU flashing?
If that will work would be perfekt!
Thanks for all!
Click to expand...
Click to collapse
Do not use that, I will guide you on how to do it. You can do the following, create a goldcard and then flash an unbranded RUU for your CID number. The fact is that for creating a goldcard you need a working android device. Do you have another device?
glevitan said:
That is why you are stuck.You are not S-OFF nor Unlocked, so it will be impossible to write partitions in that state. Flash a RUU and that will fix the problem or unlock the bootloader, flash CWM recovery and then a custom rom. That is up to you...
Click to expand...
Click to collapse
Hello Thanks for your messages. I searched severals RUUs but none of them worked, it says Imageversion 3.13.161.5 and Error [132]: signature error
Any Idea?
edit:
I also tried loading the rom.zip into the SD card naming it as pd98img.zip. The phone recognized it checks it but than returns back to the fastboot menu!
twomiothandroiduser said:
Hello Thanks for your messages. I searched severals RUUs but none of them worked, it says Imageversion 3.13.161.5 and Error [132]: signature error
Any Idea?
edit:
I also tried loading the rom.zip into the SD card naming it as pd98img.zip. The phone recognized it checks it but than returns back to the fastboot menu!
Click to expand...
Click to collapse
That is because that RUU's seems not be for your device. Even flashing them as PD98IMG won't work if those RUUs do not match your CID. If you have another android working device I can help you create a goldcard, if not I guess the best is to unlock bootloader and then get a custom rom...
If it is alright with you I can help you over teamviewer...
glevitan said:
That is because that RUU's seems not be for your device. Even flashing them as PD98IMG won't work if those RUUs do not match your CID. If you have another android working device I can help you create a goldcard, if not I guess the best is to unlock bootloader and then get a custom rom...
If it is alright with you I can help you over teamviewer...
Click to expand...
Click to collapse
You wont believe i have a second one
it has s-off
it would be kind if you show me both ways.
twomiothandroiduser said:
You wont believe i have a second one
it has s-off
it would be kind if you show me both ways.
Click to expand...
Click to collapse
Use this to create the goldcard...be cautious on how you do that to avoid corrupting the sdcard:
http://forum.xda-developers.com/showthread.php?t=970157
Once you have patched the sdcard, without dismounting it, put a RUU in there and name it PD98IMG.zip, then boot in bootloader and wait until you are prompted to update.
And if you are a bit lost, download this: http://www.teamviewer.com and I can connect to your PC to lend you a hand.
glevitan said:
Use this to create the goldcard...be cautious on how you do that to avoid corrupting the sdcard:
http://forum.xda-developers.com/showthread.php?t=970157
Once you have patched the sdcard, without dismounting it, put a RUU in there and name it PD98IMG.zip, then boot in bootloader and wait until you are prompted to update.
And if you are a bit lost, download this: http://www.teamviewer.com and I can connect to your PC to lend you a hand.
Click to expand...
Click to collapse
Hi, i tried what you told me to do. with the The programm crashed at point 5 so i used this german side http://www.pocketpc.ch/htc-desire-hd-root-rom/111867-anleitung-desire-hd-goldcard-erstellen.html to create an gold card. but the wired thing is, that the http://psas.revskills.de/?q=goldcard wants to get the cid not the reversed cid.
But all in all after I created that gold card with hex editor, and putting the ruu as pd98img.zip on the SD. The bootloader was loading the *.zip and checking the zip and without error or anything else it just got back to the bootloader.
Hello bro i've flashed my hTc desire HD without knowing that it is S-OFF or not directly using Power+Volume down then selected the recovery and then Volume up+power and after that apply from sd card
Now my phone is stuck on hTc logo
So plz help me to fix my promblem
mdshad1 said:
Hello bro i've flashed my hTc desire HD without knowing that it is S-OFF or not directly using Power+Volume down then selected the recovery and then Volume up+power and after that apply from sd card
Now my phone is stuck on hTc logo
So plz help me to fix my promblem
Click to expand...
Click to collapse
If you are S-OFF, put a custom rom in the sdcard, boot in recovery and flash it. That will sort it out.
glevitan said:
Use this to create the goldcard...be cautious on how you do that to avoid corrupting the sdcard:
http://forum.xda-developers.com/showthread.php?t=970157
Once you have patched the sdcard, without dismounting it, put a RUU in there and name it PD98IMG.zip, then boot in bootloader and wait until you are prompted to update.
And if you are a bit lost, download this: http://www.teamviewer.com and I can connect to your PC to lend you a hand.
Click to expand...
Click to collapse
I'm sad. I tried it at a nother PC it creates the Goldcard (it said it has) I copied the RUU. Put SD into the phone Restart the Phone into the boot loader. Waited the file to check . and then. Back to the hboot menu nothing more.
Related
Heres the situation. Was happily running a rooted s-offed desire using Oxygen 2.3.2.
I needed to flash on a stock O2 rom as its got to go back to HTC tomorrow because of the reboot on charge issue.
Anyone I've run into a problem.
Downloaded and ran this:
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.exe
Then this happened:
Right crew downloaded the O2 Froyo RUU.
Go to install and get this screen:
(ruu.jpg)
I start to worry a bit. But none the less I Wait for it to do its thing...
then I get this:
(ruu2.jpg)
Im now stuck with a warning logo and a small traiangle in each corner of the screen.
When I unplug the desire I get a white screen with the following:
Code:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
Mar 29 2010,21:34:33
RUU
Main Version is Older!
Update Fail!
I cant get into recovery anymore
adb doesnt see the phone.
The only access I have to it is via fastboot.exe.
Any ideas? As I gotta get it back to stock - its being picked up in the morning to go back for warenty repairs!
Cheers!
*Edit*
My CID is O2__001
installing RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed fails with:
ERROR[131]:CUSTOMER ID ERROR
Totally stuck here I think...
Yes sir. I had an RUU file that did the exact same thing to my phone (bricked it). The RUU was an incomplete file and would only show the triangles in the 4 corners or boot loader with ruu as the only option. I had to look for a froto ruu of 2.2 and run it. As I'm sending this to you from that very same phone which was rooted again with unrevoked since I was back to froyo, you can see there is hope. I'm trying to remember the link to the ruu. I'm at work right now or I would attach the direct link to the working ruu for you. I'm looking into it for ya as we speak though.
Sent from my PC36100 using XDA App
Thank you kind sir, you could just possibly save my life!
Please pardon by botched spelling for I'm not the greatest of scholars. Unfortunately at this time, I'm not about to look for the correct RUU file. But I do kbow this much. Your lokking for an RUU that will downgrade the software to the oldest software that was released to the device. Now, I too must advise you, you will not turn S-on and if you rooted with revolutionary, the water-mark will still be there on your home screen. Those are other "issues" you will also have to "work the kinks out of" before warranty will replace it. Let me know if that doesn't help.
Sent from my PC36100 using XDA App
Tried a few RUU's but keep getting a "Customer ID error" on anyversion the same or > what im trying to install.
I've tried this guide:
http://forum.xda-developers.com/showthread.php?t=1275632
S-ON
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Click to expand...
Click to collapse
How the hell can I create a goldcard (need to read sd serial) when I cant use adb to connect to the phone (although fastboot.exe does).
fastboot getvar all if its any help:
C:\Program Files (x86)\android-sdk-windows\platform-tools>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.80.0000
INFOversion-baseband: 4.06.00.02_2
INFOversion-cpld: None
INFOversion-microp: 031d
INFOversion-main: 2.29.405.5
INFOserialno: HT05ZPL09473
INFOimei: 357841036658280
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 4123mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: dirty-6175d920
INFOhbootpreupdate: 11
all: Done!
Click to expand...
Click to collapse
Well thats me properly ****ed.
Can find any way of reading the CID of a card. The app someone linked to doesnt work on a laptop with inbuilt on pci card reader - no in a PC with a hub.
I wonder how much these HTC bastards will want to charge me to have the motherboard replaced (rebooting under charging) and reflashing the device.
You would've thought someone would have come up with a better solution for finding a SD cards CID.
What exactly do you mean by this:
brockers said:
Right crew downloaded the O2 Froyo RUU
Click to expand...
Click to collapse
AND ALWAYS REMEMBER: AS LONG AS YOU CAN TURN ON YOUR PHONE, IT'S NOT BRICKED!!!!!!
nobody around you who can create goldcard for you? any android phone?
kotag82 said:
nobody around you who can create goldcard for you? any android phone?
Click to expand...
Click to collapse
Sadly not. I work with nothing but iPhone users.
The courier has picked it up now to send back to HTC for the rebooting issue. Lets see how much they try and rape me for this...
Had a result!
Checked the HTC repair tracking site to see my phones on its way back to me today! I thought I'd give them a call to get more details.
I was told the mainboard was indeed faulty so was replaced, phone now fully functional - and all under warrenty!
Can't wait to get it back to root it again...
Hi,
I need your kind advice in fixing my issue. I have DHD Vodafone 3.13.161.3 GB 2.3.5.
I unlocked the phone using HTC official method, phone got restored to factory default and I tried to flash a custom rom without knowing that I need to change the CID.
The phone starts but get stuck on HTC logo, I have EXT4 recovery installed already.
Tried wiping and factory reset but it seems that its of no use. I can boot to hboot, it says unlocked (highlighted) and s-on.
I did try to make a goldcard, put the sdcard in another phone and used the goldcard helper app then went to the site and submitted the CID and downloaded the image and followed the steps.
(got mmc0 and mmc1, I took mmc1 by manually writting it)
I copied another official rom PD98IMG.ZIP downloaded from the net for WWE and ARA versions copied them to SDcard and got into hboot but after loading it says wrong image and goes back to hboot.
I deseparate to get it fixed, would you plz provide some guidance on how to fix it since I was not able to get Vodafone RUU or any other mechanism to fix!
Appreciate your assistance and efforts..
*** Unlocked **
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_oot
eMMC-
If you unlocked from HTCdev you have to flash kernel in fast boot rename boot.IMG to pd98img.zip and accept update. Then remove or rename to pd98img.zip.bak so it doesn't keep updating. It's because of s-on you should be able to downgrade hboot and s-off.
Sent from my Inspire 4G using XDA
sammael1069 said:
If you unlocked from HTCdev you have to flash kernel in fast boot rename boot.IMG to pd98img.zip and accept update. Then remove or rename to pd98img.zip.bak so it doesn't keep updating. It's because of s-on you should be able to downgrade hboot and s-off.
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Thanks for your response Sammael,
Just some background info about my case:
I have DHD from Vodafone UK which was on the latest rom from Vodafone 2.3.5, I did bootloader unlock using HTCDev then flashed Ext4 recovery.
I tried flashing a custom rooted rom based on WWE version using the recovery mode (install zip from sdcard) after which I got the phone stuck on HTC logo screen everytime I try to power it on.
I tried using WWE RUUs with fastboot usb but got err155, I downloaded Vodafone PD98IMG.zip from that was uploaded by a guy in another forum but copying it to the sdcard and loading it using hboot gave me wrong image/rom message. I tried running WWE RUU then copying the PD98IMG.zip to the temp folder and renaming it to rom.zip after deleting the original rom.zip but again I got err155.
I need at least to get back on Vodafone stock rom and fix the problem, I am not sure if I need to relock the bootloader and if I must flash back the stock recovery.
Can anyone help with this as I have been trying different options for the last 4 days and all the tools that were mentioned need to have a functional phone to do usb debugging and charge only mode!
*** Unlocked***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
First will cover the obvious you should have unlocked via HTC dev. The hack kit is the way to go about things
Now for the fix.
Download a custom rom on PC, have androidsdk setup
Boot into recovery and reinstall your custom from.(remember to full wipe).
Once complete plug phone into PC and run adb reboot bootloader.
Once in boot loader select fast boot if its not already selected.(should read fast boot USB)
Now in the custom rom you download open it and take out the boot.img and put it wherever you have adb/fast boot folders
Then type the command
Fastboot flash boot boot.img
Fastboot reboot
You will have to do this every time you flash a new rom, since you HTC dev unlocked. I would search into relocking boot loader and using the hack kit
Sent from my Desire HD using XDA
marsdta said:
First will cover the obvious you should have unlocked via HTC dev. The hack kit is the way to go about things
Now for the fix.
Download a custom rom on PC, have androidsdk setup
Boot into recovery and reinstall your custom from.(remember to full wipe).
Once complete plug phone into PC and run adb reboot bootloader.
Once in boot loader select fast boot if its not already selected.(should read fast boot USB)
Now in the custom rom you download open it and take out the boot.img and put it wherever you have adb/fast boot folders
Then type the command
Fastboot flash boot boot.img
Fastboot reboot
You will have to do this every time you flash a new rom, since you HTC dev unlocked. I would search into relocking boot loader and using the hack kit
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
Hi marsdta,
I sort of worried about doing what you suggested as my device still show the CID as VODAP001. Its on Ship S-On and the problem I got into was by flashing a custom rom through CWM.
Just to provide more info, I got the below details by running fastboot command getvar all. I also tried to run a WWE RUU with the goldcard plugged into my DHD but got this error message version-main failed status malformed 1 bytes!!
C:\windows\system32>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: HT0C9RX00000
INFOimei: XXXXXXXXXX
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4174mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.008s
I had some progress, relocked the bootloader and copied the PD98IMG.ZIP to sdcard. The phone starts loading the PD98IMG and then running the check, it fails on some point which I think might be the PD98IMG I got is older than the software raido/hboot installed on my phone. Below are the details.
Checking PD98IMG.zip
Main version older!
update failed
Press <Power> to reboot
The PD98IMG.zip has an android-info.txt that contains the following:
*********
modelid: PD9810000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAP304
cidnum: VODAPE17
mainver: 2.50.161.3
hbootpreupdate:12
*********
When powering the phone with vol-down I see the following info
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
I think I may need the latest PD98IMG.zip to reflash the phone back to Vodafone stock software, plz correct me if I am wrong?
The PD98IMG.zip which was provided a vodafone uk phone owner seems to check the version of my phone's current state hboot/radio.
Is there any place where I can get the latest PD98IMG.zip even if I have to pay for it?
yabdali said:
I had some progress, relocked the bootloader and copied the PD98IMG.ZIP to sdcard. The phone starts loading the PD98IMG and then running the check, it fails on some point which I think might be the PD98IMG I got is older than the software raido/hboot installed on my phone. Below are the det
I think I may need the latest PD98IMG.zip to reflash the phone back to Vodafone stock software, plz correct me if I am wrong?
The PD98IMG.zip which was provided a vodafone uk phone owner seems to check the version of my phone's current state hboot/radio.
Is there any place where I can get the latest PD98IMG.zip even if I have to pay for it?
Click to expand...
Click to collapse
I haven't been able to find the newest ruu for your branded device. Best I can say is keep looking. But if you can't find it your going to have to flash a from how I suggested to get a working phone.
Or maybe wait and see if anyone has other ideas to try
Sent from my Inspire 4G using XDA
marsdta said:
I haven't been able to find the newest ruu for your branded device. Best I can say is keep looking. But if you can't find it your going to have to flash a from how I suggested to get a working phone.
Or maybe wait and see if anyone has other ideas to try
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Hi marsdta,
Thanks for your contribution..
I have relocked my bootloader, tried flashing the PD98IMG.zip but I got main version is older message.
I unzipped the PD98IMG.zip and tried flashing the radio and the boot in fastboot USB mode but signature failed!
Do you have any suggestion or insights about what else I should do?
D:\htctest\files>Fastboot flash radio radio.img
sending 'radio' (24960 KB)... OKAY [ 4.556s]
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 7.792s
D:\htctest\files>Fastboot flash boot boot.img
sending 'boot' (2764 KB)... OKAY [ 0.502s]
writing 'boot'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.864s
Did you try getting S-OFF via the Advanced Ace Hack Kit? I got a Vodafone DHD on release in Aus and was prompted to make a gold card, eventually managed S-OFF without one.
You get the main version older because your son. And you get the failed remote because your relocked the bootloader. Personally at this point I would unlock the boat loader again, flash cwr then a from and then its boot.img to get a working phone. Then if the pd98img/ruu that you need comes available go back and root properly. But for now I would say to at least get it in a useable state
Sent from my Inspire 4G using XDA
marsdta said:
You get the main version older because your son. And you get the failed remote because your relocked the bootloader. Personally at this point I would unlock the boat loader again, flash cwr then a from and then its boot.img to get a working phone. Then if the pd98img/ruu that you need comes available go back and root properly. But for now I would say to at least get it in a useable state
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Hi marsdta,
Thanks again. Just a quick clarification, which boot.img do you suggest I should flash after unlocking the bootloader and flashing cwm?
yabdali said:
Hi marsdta,
Thanks again. Just a quick clarification, which boot.img do you suggest I should flash after unlocking the bootloader and flashing cwm?
Click to expand...
Click to collapse
Depends on what rom you want to install.
So let's say you want to flash cm. Download the rom on your pc. Place a copy of it on your SD card as well. Boot into cwr and flash as usual. Once complete boot into the boot loader.(using adb reboot boatlader is convenient, but you could do it manually by pulley battery and powering up with volume down+power button)
Then take out the boot.img of cm zip and flash as you tried earlier(fastboot flash boot boot.img)
Then reboot phone
Sent from my Inspire 4G using XDA
marsdta said:
Depends on what rom you want to install.
So let's say you want to flash cm. Download the rom on your pc. Place a copy of it on your SD card as well. Boot into cwr and flash as usual. Once complete boot into the boot loader.(using adb reboot boatlader is convenient, but you could do it manually by pulley battery and powering up with volume down+power button)
Then take out the boot.img of cm zip and flash as you tried earlier(fastboot flash boot boot.img)
Then reboot phone
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Thankssssssssssssssssssssssssssssssssssssssss
That did the trick, my phone is now up and running smoothly. You are the man, big THANK YOU.
NOPE Help me ! hurry up
MY DEVICES IS TURNED ON.BUT ACCIDENTALLY TURNED OFF.
NOW i can't push recovery.
my recovery (touch clock work mod) can't flash rom and hang on flashing boot.img and give error (status 7).
my device don't accept pd98img.
cant flash boot.img in fastboot : (remote not allowed)
can't write cid 11111111 or HTC__001
dont accept xtc clip.
dont accept goldcard.
dont accept boot.img renamed to pd98img.zip
just can lock and unlock with fastboot.
Note : when i'm going to clock work mod say E:Can't open /cache/recovery/log
E:can't open /cache/recovery/lat_log
just cry
Plz Help Me
Hi.
I have the same problem as described here. But my desire HD is the spanish vodafone version.
I found the original RUU here: https://docs.google.com/file/d/0B7S5vzd6Qvh9SDR4cmRwTGZWaXc/edit?usp=sharing
- I will start renaming the file to PD98IMG.zip in the SD card
- Start in bootloader mode
- Push vol+ to start the flashing
Humano, did it work?
Sent from my ATRIX HD
Hi everyone!
I've managed to screw up my Desire HD after running aahk-11092012, and was wondering if anyone had any bright ideas...
The Phone is a Desire HD bought from SFR here in France in 2011, never rooted or custom rom'ed, although updated with 2or 3 SFR roms since.
I ran aahk from the terminal on a OSX 10.7 (see Output.txt). From this you will see that it wants naturally to downgrade (to Froyo I assume) but downloading the rom fails, and even though I refused the "-n Flash this RUU? (y/n)" question, it continued doing all sorts of things, getting a few error along the way, rebooting the phone into recovery a few times, and finishes with
************* Downgrade failed *************
** Either:
** GoldCtixiard/SDCard failed
** USB connections are not working 100%
************* Downgrade failed *************
I then tried to flash the "Gingerbread HTC WWE 2.50.405.2" rom from the options menu, thinking I'd be clever, but that monumentally fails too..
From this point on the phone boots to the "Red tringle with an exclamation mark" screen (after the white HTC logo) and does nothing else.
Restarting AAHK just fails with a "Error detecting HTC phone on USB connection."
Having discovered the "VOL-UP +Power" recovery screen during this process, the next thing I tried was a "Apply sdcard:update.zip", but this just results in an "Invalid command" message underneath that already present "E: Can't open /cache/recovery/command" in yellow further down the screen.
I then try a "Wipe data/factory reset" and also a "Wipe cache partition". I can't honestly explain this. At least not given that I hadn't really looked up the issue anywhere yet. I also cant remember exactly what the output was, but the result is the same, still the red triangle screen.
OK, so now I finally open my eyes and realize what a moron I've been, so i plunge into actually learning something and realize quickly (aside from I hate myself and I'm not special, bla bla) that there are loads of thing I could have done differently, and directly on the phone, but obviously it's now too late. (See below for the information I CAN get from the Phone)
Oh yes, I did try a "Factory reset" from HBOOT, but still no joy....
The main option I've been looking into has been to recover an original branded SFR firmware and Froyo ROM and go from there, so I did manage to get a PD98IMG.zip file onto the SD card and HBOOT recognizes it, but fails with a "CID Incorrect" error.
I seem, therefore to be stuck whether I want to return to original SFR or continue tryng to flash a custom ROM:
I can't make a goldcard: I cant adb any commands, in HBOOT the device is not found, and in recovery the device is found but is "offline".
I found jo0ls' CID reader, but I dont have a SD card reader directly plugged to the PCI bus!
I did finally try to install a clockwork recovery in FASTBOOT, but get this:
$ fastboot flash recovery recovery-clockwork-5.0.2.0-ace.img
sending 'recovery' (3624 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
I assume this is much the same error as for the PD98IMG...
Sorry about the long winded post, but I hope it has the maximum of info...
Anyone have any ideas?
- I can boot to HBOOT: it shows me this:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Sep 7 2011, 19:06:24
- ...and FASTBOOT, fastboot getvar all gives this:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.03.02.26_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 1.32.405.6
INFOserialno: SH12GRX00567
INFOimei: 356812048021701
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP203
INFObattery-status: good
INFObattery-voltage: 4199mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
- The recovery is the original "Android system recovery <3e>"
AAHK, and the server hosting the downgrade files, is retired. You can still unlock the bootloader, but your hboot needs updating before it cam be unlocked. I think you could also run your stock RUU.
CID Number shows that your device is a Vodafone device, probably VodaSFR but who knows? Fetch a Voda RUU and install it
Sent from my Desire HD using Tapatalk 2
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
pascuals said:
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
Click to expand...
Click to collapse
Thanks for all your answers!
@ bananagranola: I did know aahk had been discontinued, I actually mentioned this originally but edited it out to "shorten my post"!
@ humzaahmed155: quite right, I'm with SFR, and I'm trying to simply restore an original branded ROM
@ pascuals: I will look into your suggestion right away! I was vaguely aware I might have to do this but could not get an accurate enough idea of what version might be appropriate for my phone
[SOLVED] [Q] Desire HD can't boot (red triangle) after AAHK Fail
Kawika1611 said:
Thanks for all your answers!
@ bananagranola: I did know aahk had been discontinued, I actually mentioned this originally but edited it out to "shorten my post"!
@ humzaahmed155: quite right, I'm with SFR, and I'm trying to simply restore an original branded ROM
@ pascuals: I will look into your suggestion right away! I was vaguely aware I might have to do this but could not get an accurate enough idea of what version might be appropriate for my phone
Click to expand...
Click to collapse
Woohoo!! I'm so happy, I got the phone working again last night!! I had a ruu kicking around:
RUU_Ace_Sense30_S_Vodafone_FR_3.13.163.3_Radio_12.65.60.29_26.14.04.28_M_release_227340_signed.exe
from the first day I'd bricked it. This hadn't worked the first time I tried it on windows (actually a Parallels VM on Mac), with the phone plugged in, but I can't remember what mode the phone was in; but as you'll see below I must not have been in fastboot...
Whatever, last night I finally tried pascuals's PD9810000 RUU, with the phone connected and in fastboot, the utility detects the phone fine, but fails with a firmware version error, saying the phone is 1.32.405.6, it will install version 3.13.0.0 but I need to "upgrade to 3.12.405.1"..:silly: (see attachments).
Feeling dejected I fired up the rom cited above thinking I have nothing to lose, and...lo an behold...10 minutes or so later the phone reboots to a beautiful welcome screen insulting me for not having inserted a SIM card!!!
Thanks anyway for your answers, at least they got me looking in the right direction!! I will now go a learn properly how this things work before bricking it again
pascuals said:
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
Click to expand...
Click to collapse
My HBOOT is 0.85.2425, after S-OFF. Can I update to 2.00.0029? How?
Thanks.
use that link and just run the exe with your phone connected, atleast with debugging on i think, mine was like that, the tool took care of the rest automatically.
mobidor said:
My HBOOT is 0.85.2425, after S-OFF. Can I update to 2.00.0029? How?
Thanks.
Click to expand...
Click to collapse
I see no reason why you need to update the bootloader when you already have s-off. If your bootloader is engineering bootloader then just let it be.
Sent from my Desire HD
Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
gavanas said:
Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
Click to expand...
Click to collapse
fastboot getvar all
and post the results.
nlooooo said:
fastboot getvar all
and post the results.
Click to expand...
Click to collapse
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH15ZRX00171
INFOimei: ???
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
gavanas said:
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: *************************
INFOimei: **********************
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
Click to expand...
Click to collapse
Go here
http://www.shipped-roms.com/index.php?category=android&model=Ace
download thi RUU
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
And try to run it with phone in fastboot.
If that doesn't work try with some RUU that has 3.13.xxx.x main version (i.e. RUU_Ace_Sense30_S_hTC_Asia_WWE_3.13.707.4_R_Radio_12.65.60.29_26.14.04.28_M_release_234022_signed.exe)
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
gavanas said:
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
Click to expand...
Click to collapse
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
gavanas said:
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
Click to expand...
Click to collapse
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Use AAHK2
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Delete your imei #
Get nloooo to delete it from the quote as well.
Sent from a dream.
gkprashu said:
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Click to expand...
Click to collapse
I used AAHK2 when my phone got into a similar situation. It worked like charm
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
After trying the 4.3 beta versions, i tried again to install the original firmware.
As before, the ruu setup did not work. It should, since my cid is HTC__001, and i was trying with every WWE version available.
Anyway, during setup, i found in the temp folder the rom.zip, and within it the necessary boot.img, system.img and recovery.img.
I flashed them through cmd using fastboot.
Everything worked out, now i am back to stock, but i guess that my phone is something like Frankenstein, using the radio and libraries from the last jellytime image i installed...
It works, but i don't recommend it. I think that i finally got lucky, and didn't brick my Desire HD.
Thanks for all your help and interest.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
glevitan said:
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
t0mas_ said:
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
Click to expand...
Click to collapse
Well, RILs are not compatible then, and many AOSP partitions can not work fine with Sense Roms. If he did that then his cell might explode....
forgot about rils and didnt know about partitions.
but expoding cells are not to be taken lightly, especially when put in trouser pocket
Hi guys, I´ve bought a DHD, it is my third DHD and the first with troubles. I always did the job using the instructions on htcdev website, but this time it stucks.
The problem? My DHD is a vodafone branded, software number 3.13.161.5 at the htcdev site they dont offer this RUU, only the 3.13.161.3 and of course it won´t work.
In the fastboot menu I got following infos...
ACE PVT SHIP S-ON RL
HBOOT 2.00.0027
RADIO 26.14.52.27
eMMC-boot
does anyone got this appropriate RUU to download so I can do the job, or can it be done on some other way, but please as easy as possible
Thanks
profcb said:
Hi guys, I´ve bought a DHD, it is my third DHD and the first with troubles. I always did the job using the instructions on htcdev website, but this time it stucks.
The problem? My DHD is a vodafone branded, software number 3.13.161.5 at the htcdev site they dont offer this RUU, only the 3.13.161.3 and of course it won´t work.
In the fastboot menu I got following infos...
ACE PVT SHIP S-ON RL
HBOOT 2.00.0027
RADIO 26.14.52.27
eMMC-boot
does anyone got this appropriate RUU to download so I can do the job, or can it be done on some other way, but please as easy as possible
Thanks
Click to expand...
Click to collapse
In htcdev site it says:
"NOTE: If you do not find your ROM version in the table below, and your ROM version is newer, then your device does not require the RUU. Please bypass these steps and continue to the next page."
Because you have newer hboot, just go to next page.
If you whant to get full unlocked bootloader S-off you can use AAHK2 by Phiber2000.
http://forum.xda-developers.com/showthread.php?t=2367322
But it's a little complicated.
Thank you for your reply, but I tried this already, and it wont work. Maybe because my HBOOT is 0027??? I´d rather not to perform a S-off cause I never did it before...
I open the CMD and type fastboot oem_get_identifier_token and the result is : ... INFO(ERR) Command error!!!
I cannot get the token!
profcb said:
Thank you for your reply, but I tried this already, and it wont work. Maybe because my HBOOT is 0027??? I´d rather not to perform a S-off cause I never did it before...
I open the CMD and type fastboot oem_get_identifier_token and the result is : ... INFO(ERR) Command error!!!
I cannot get the token!
Click to expand...
Click to collapse
What do you get when you type: fastboot getvar all
I didn´t type this, untill now...
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.52.27
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.161.5
INFOserialno: HT11CRX04531
INFOimei: I THINK YOU DON´t NEED THIS
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP102
INFObattery-status: good
INFObattery-voltage: 4191mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.026s
Download that UK hboot from HTC dev, start ruu, find in temp rom.zip (or boot.zip, something like that), rename it to PD98IMG.zip, put it on a goldcard, go in hboot and flash it.
Or you can download the whole rom here:
http://shipped-roms.com/index.php?category=android&model=Ace
And the steps are the same.
When you downgrade it with whole ROM just run ruu form htcdev. You don't have to do it with goldcard.
Here is what I did... I download the UK 3.13.161.3 from htcdev found it in temp folder rename it and put it on my sdcard, because I couldn´t find a tutorial how to make a goldcard. Then I went to bootloader and the phone asked me do I want to flash it i choosed yes and the phone restarted. Than I run the RUU but I got the ERROR (191) ROM IS NOT SUPPORTED
EDIT:
I noticed that my bootloader says nov LOCKED so I try again reading the token and I got it, but after pasting the token htcdev gave me following message:
Unlocking Bootloader Failed!
Sorry it didn't work out. Here's why:
Required Resources
Please make sure all items are installed and up to date.
We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
Click to expand...
Click to collapse
You can install HTC Europe + it's world wide (but it's litle older):
http://shipped-roms.com/download.ph...60.29_26.14.04.28_M_release_225512_signed.exe
Or latest for europe (turkey version):
http://shipped-roms.com/download.ph...60.29_26.14.04.28_M_release_227499_signed.exe
In some thread I was read that even people from US install it.
Yes, whenever you downgradeing rom or hboot or whant to install rom whitch is not for your CID on locked hboot you have to use goldcard.
You get error 191 because you are trying to downgrade on locked hboot.
To make a goldcard:
http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
(4. Go to this page, enter the reverse CID)
Because this page not working here is new one:
http://huygens.hoxnet.com/goldcard.html
Thank you very much, I did it. I just put the ROM.zip found in the temp folder on my sd card, renamed. Then went to bootloader it asked me to whether to flash or not. and than I could get my token...