Hey guys,
I followed the thread on how to root my E971 and after transfering some files, I disconnected my phone for a bit. Shortly after, I went to unlock my bootloader, and my laptop no longer recognizes my phone. I even tried multiple ports with various cords.
Any ideas would help.
Related
!!!!Before I tell you anything I couldn't find another thread like this!!!!
HTC One V (Virgin Mobile USA) - Unlocked Bootloader / Rooted
Had a system update, no longer rooted. Bootloader is still unlocked. But my problem is my phone won't realize that its plugged into a computer so I can't root it. It may or may not be my cord, it has a little damage done to it. Yesterday I finally got it to connect to my desktop, I was like yeah! Wen't to my laptop which had the files for rooting, and it wouldn't realize its in a computer. Now it won't do it to my desktop either. Tried rebooting didn't work. Thanks for the help.
Surely you have another cable you could try? Could also be a problem with the USB port of your machine, try using a different port, maybe one that isn't used much
After using a Duracell car charger, my phone fails to connect to my computer as a USB device, however it will charge. I know that it is not the cable that I am using, as I have tried several different cables, and several different USB ports. I know that it is not the computer as I have used this computer multiple times to move files to and from my phone, have used LGNPST several times as well, and even tried to connect on my laptop
Still, nothing. :crying:
Not only that but my phone will not even show up in LGNPST when I put it into download mode, and I cannot connect through ADB in TWRP, which I have been able to do before.
My only conclusion is that the data pins within the USB port have been screwed up.
This wouldn't be a problem, except that I have an unlocked bootloader, and cannot go to Sprint and get a new phone under warranty.
One possible fix I can think of is buying a replacement USB port and fixing it myself.
The other potential fix I can think of is possibly using Freegee and someone else's stock recovery bootloader backup, which would then allow me to go Sprint and get my phone replaced.
As of now, I'm not sure what to do. Any suggestions?
They're very much appreciated. :good:
EricCamino121 said:
After using a Duracell car charger, my phone fails to connect to my computer as a USB device, however it will charge. I know that it is not the cable that I am using, as I have tried several different cables, and several different USB ports. I know that it is not the computer as I have used this computer multiple times to move files to and from my phone, have used LGNPST several times as well, and even tried to connect on my laptop
Still, nothing. :crying:
Not only that but my phone will not even show up in LGNPST when I put it into download mode, and I cannot connect through ADB in TWRP, which I have been able to do before.
My only conclusion is that the data pins within the USB port have been screwed up.
This wouldn't be a problem, except that I have an unlocked bootloader, and cannot go to Sprint and get a new phone under warranty.
One possible fix I can think of is buying a replacement USB port and fixing it myself.
The other potential fix I can think of is possibly using Freegee and someone else's stock recovery bootloader backup, which would then allow me to go Sprint and get my phone replaced.
As of now, I'm not sure what to do. Any suggestions?
They're very much appreciated. :good:
Click to expand...
Click to collapse
Have you tried uninstalling drivers and reinstalling?
Or you can Bluetooth FreeGee to your phone and relock it that way. If you have the files on it.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Yes, I already uninstalled and reinstalled the drivers, and used another computer, but it still won't detect. I don't have any Freegee boot loader backups, and I'm unsure if I can flash a boot loader anyways without a PC. I'm running ZVC stock, so I just need to relock the bootloader. I don't know what you mean by using Bluetooth, as I have WiFi access to move files with ES file explorer from my tablet to phone.
Hi Guys
I hope someone can help me I have a very strange problem. My galaxy note 2 is not detected by my computer at all (Not a driver issue, not seen at all) It charges fine.
Things I've tried so far are 3 different cables,
Two different Computers,
Reset phone to stock out of box state.
And the one that gets me the most is I even changed the whole USB board assembly. (I was sure it had to be a broken USB port
Still no joy.
The problem now is if I can't connect it to my computer I can't reroot through Odin.
Any Ideas?
Also is it possible to root phone again from stock without connecting USB to PC.
Thanks in advance.
USB port not conecting to pc SPH L900 note 2
I am in the same boat , I have purchased a new usb port, changed it and nothing, I have tried 3 differnt cables , nothing, I have restore the phone and wipe out cache and still nothing.
if you hapen to find a solution plese let me know, and if I find it first I will posted here.
Riclau
gersrt said:
Hi Guys
I hope someone can help me I have a very strange problem. My galaxy note 2 is not detected by my computer at all (Not a driver issue, not seen at all) It charges fine.
Things I've tried so far are 3 different cables,
Two different Computers,
Reset phone to stock out of box state.
And the one that gets me the most is I even changed the whole USB board assembly. (I was sure it had to be a broken USB port
Still no joy.
The problem now is if I can't connect it to my computer I can't reroot through Odin.
Any Ideas?
Also is it possible to root phone again from stock without connecting USB to PC.
Thanks in advance.
Click to expand...
Click to collapse
I have a really strange problem that none of the other threads in this forum have described. 5X running 7.0 Build NBD90W - Unlocked Bootloader
The 5X was working just fine and I was able to connect to both of my PCs and change the mode from Charging to MTP or PTP from the pull down. Now when I connect, I can see that phone is being charged when connected to the PC, but the pull down is not showing up. If I go into DEVELOPER Options under Networking and try to change it to one of the other settings, nothing happens. My PC does not show the 5X connected in the Device Manager.
I have also tried booting into the Bootloader and using fastboot or adb and neither is able to see the phone. This is happening on multiple PCs.
It's like something is broken inside the phone that it is not communicating. I have tried everything in the forums, I even reinstalled the SDK Toolkit but nothing is working. My last option was to factory reset the phone.
I have also tried to get into Stock Recovery and when I push the power and up button, it gives the message the bootloader is unlocked and then restarts the phone. -- EDIT -- I am able to get into Stock Recovery, I wiped cache and rebooted, still no luck.
Also tried booting into Safe Mode, didn't make a difference.
Any ideas? Thanks....
You didn't mention if you've tried a different cable.
kirkgbr said:
You didn't mention if you've tried a different cable.
Click to expand...
Click to collapse
Good point, I have tried multiple different cables. Same cables work fine with my Nexus 6P.
Got the OTA for N5D91L this afternoon, it was able to successfully update to the November security and after the reboot, still not able to connect to the PC. :crying:
Bump it up!
Oh, i see, i'm not the one with the same problem. i have two 5x with the same problem. both unlocked, rom installed, both started not being detected at some point.
faulty cable
Ok, brought phone to warranty center. They could see a phone and restored OS to original.
Bought another cable to check and it works now ok. Old Nilkin cable still doesn't work (only charges). So, i guess, the problem was with cable in my case.
Good luck finding what's wrong with yours phone.
Hey guys, I'm having a problem that I don't know if it can be solved:
When Pie came out, phone had a problem with baseband, fixed it flashing another modem. Then I booted into TWRP and accidentally changed to the unactive and blank slot. My phone does not boot since then... no USB (even qcom usb is not showing), no bootloader, nothing at all.
I did follow some tutorials but no success... tried different Windows drivers, USB ports, cables, Linux, nothing works. Do someone have and idea?
No one has been able to recover from this. Pie and blank slots make bricks. Thank Moto for killing the Z2 with their sloppy coding.