Please help. Phone wont connect to Computer. Ive tried everything - Sprint Samsung Galaxy Note II

Hi Guys
I hope someone can help me I have a very strange problem. My galaxy note 2 is not detected by my computer at all (Not a driver issue, not seen at all) It charges fine.
Things I've tried so far are 3 different cables,
Two different Computers,
Reset phone to stock out of box state.
And the one that gets me the most is I even changed the whole USB board assembly. (I was sure it had to be a broken USB port
Still no joy.
The problem now is if I can't connect it to my computer I can't reroot through Odin.
Any Ideas?
Also is it possible to root phone again from stock without connecting USB to PC.
Thanks in advance.

USB port not conecting to pc SPH L900 note 2
I am in the same boat , I have purchased a new usb port, changed it and nothing, I have tried 3 differnt cables , nothing, I have restore the phone and wipe out cache and still nothing.
if you hapen to find a solution plese let me know, and if I find it first I will posted here.
Riclau
gersrt said:
Hi Guys
I hope someone can help me I have a very strange problem. My galaxy note 2 is not detected by my computer at all (Not a driver issue, not seen at all) It charges fine.
Things I've tried so far are 3 different cables,
Two different Computers,
Reset phone to stock out of box state.
And the one that gets me the most is I even changed the whole USB board assembly. (I was sure it had to be a broken USB port
Still no joy.
The problem now is if I can't connect it to my computer I can't reroot through Odin.
Any Ideas?
Also is it possible to root phone again from stock without connecting USB to PC.
Thanks in advance.
Click to expand...
Click to collapse

Related

All of a sudden phone will not connect to pc.

Alright I am running cm9 and have been for weeks with no issues. I got the new galaxy s3 and installed the drivers on my pc to root it and all that. I want to change roms on my E4GT though so I go to plug it in and it charges but will not connect so I figured I had to reinstall the usb drivers for my e4gt so I did and still nothing. I am in no way a newb i have flashed tons of roms and I know I did not do anything wrong. I believe I am just missing a driver. Can someone point me in the right direction? I have the latest version of kies installed and the drivers straight from samsungs website.
Made a little progress but not much. I realized I didnt have usb debugging enabled so I enabled that but now when I plug it in it just says usb debugging enabled instead of asking if I want to mount as storage device I have tried rebooting phone and pc several times. I am running out of ideas.
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Thank you very much i will give it a try and report back.
Sent from my SPH-D710 using XDA
Mattheyu said:
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Click to expand...
Click to collapse
Actually no i did not get the drivers by installing kies because I already had it i got the sprint sph d710 usb drivers. Should I uninstall those and just install kies?
Well this is a rediculus problem that I am having now.. I cant install kies because it is saying I am not connected to the internet and I clearly am as I am posting this on the same pc that I am trying to install on.. I have tried rebooting the pc that does nothing.
Alright I got kies to install but still the same thing when I plug the phone in it says usb debugging enabled i really have no idea what is going on.
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
scud626 said:
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
Click to expand...
Click to collapse
I have tried different ports but not a different comp. Ya I am gonna flash a new rom and see if that helps. How could I have fried the usb board though? I havent touched the phone in days since I got the gs3.
Yup Just flashed the new Super Nova rom and now everything is working again, thank you very much for all the help and if anyone hasnt checked out that rom yet they need to its awesome!

[Q] Help, can not connect semi-bricked phone to computer

Greetings,
I have a rooted epic running the latest Clean GB
The other night the phone went crazy, it would reboot over and over and the screen would lock out. I went into CWM and restored it back to when I first installed Clean GB about 2 months ago. It had an error the first two times then it went on the third time. Then the phone crashed while rebooting and now will only go to the Samsung black screen. I cannot boot to cwm only to the Download screen (#1 and power). I tried connecting it to my computer to try and odin it back and I can not get it to connect. After reading the forms I re-installed the drivers uninstalled rebooted installed over and over. about 10 times. I found on the forums that the stock cable could be bad so found 3 other cables at home and tried them, still nothing then went to radio shack and bought the 22$ cable and still nothing. I have tried 3 different computers (2 windows 7 and 1 windows xp) every usb port on all the computers it says the device has malfunctioned. Odin does not recognize the device either does Heimdall. I am lost can you guys help me out? or do I need to see if sprint can fix it or use it for target practice? Thanks for your help
It may be a bad motherboard.
Sent from my PantechP4100 using xda premium
draginspect3 said:
Greetings,
I have a rooted epic running the latest Clean GB
The other night the phone went crazy, it would reboot over and over and the screen would lock out. I went into CWM and restored it back to when I first installed Clean GB about 2 months ago. It had an error the first two times then it went on the third time. Then the phone crashed while rebooting and now will only go to the Samsung black screen. I cannot boot to cwm only to the Download screen (#1 and power). I tried connecting it to my computer to try and odin it back and I can not get it to connect. After reading the forms I re-installed the drivers uninstalled rebooted installed over and over. about 10 times. I found on the forums that the stock cable could be bad so found 3 other cables at home and tried them, still nothing then went to radio shack and bought the 22$ cable and still nothing. I have tried 3 different computers (2 windows 7 and 1 windows xp) every usb port on all the computers it says the device has malfunctioned. Odin does not recognize the device either does Heimdall. I am lost can you guys help me out? or do I need to see if sprint can fix it or use it for target practice? Thanks for your help
Click to expand...
Click to collapse
What kind of usb cables? just because it was $22 doesn't means its a good data cable. I find thick blackberry cables are the best, i leave one plugged into my pc.
.
Also make sure your micro usb port on the phone isn't dirty. I find a can of air duster works well.
Are you downloading the correct drivers straight from samsungs website?
If you can get into download mode its either usb port is bad, cable is bad, or computer doesn't play well with your phone.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
Thanks
Thanks for the ideas, I just cleaned my usb ports on my computer and on the phone and nothing. The cable is the thickest one I can find. I have read on other forums that they have had great success with that cable. Who knows, I may try and find black berry cable or take it to someone that knows more than I do. If anyone has any other ideas it would be greatly appreciated.
Thanks
Thanks
I forgot to mention that yes I downloaded them from Samsung and also from a thread on xda.

[Q] USB Device Not Recognized

I bought a Korean Note II (SHV-E250S) and my computer wasn't able to recognize it from the get-go. Now, I installed a rom that caused my phone to be stuck at the first screen and I can't connect my phone in download mode to restore it. I tried a different cord (supposedly OEM), reinstalling kies, downgrading kies, installing just Samsung USB drivers, uninstalling the unknown device driver, shutting down the computer, installing updates, reupdating kies, emergency software recovery/upgrade, switching USB ports, USB debugging on/off (when the phone still worked). I'm literally out of things to try. Any help will be appreciated.
upacreekwithoutapaddle said:
I bought a Korean Note II (SHV-E250S) and my computer wasn't able to recognize it from the get-go. Now, I installed a rom that caused my phone to be stuck at the first screen and I can't connect my phone in download mode to restore it. I tried a different cord (supposedly OEM), reinstalling kies, downgrading kies, installing just Samsung USB drivers, uninstalling the unknown device driver, shutting down the computer, installing updates, reupdating kies, emergency software recovery/upgrade, switching USB ports, USB debugging on/off (when the phone still worked). I'm literally out of things to try. Any help will be appreciated.
Click to expand...
Click to collapse
Tried checking if ODIN recognises it on computer?
bunglebp said:
Tried checking if ODIN recognises it on computer?
Click to expand...
Click to collapse
Yes. It doesn't recognize it either.
upacreekwithoutapaddle said:
Yes. It doesn't recognize it either.
Click to expand...
Click to collapse
Do u have a nandroid backup?
Sent from my AweSoMe ☆♥Note2♥☆
mannyvinny said:
Do u have a nandroid backup?
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
No. Sorry. I made a back up in clockwork recovery but I get an error MD5 mismatch.
Device Descriptor Request Failed (Code 43)
The phone is now soft bricked and I get Device Descriptor Request Failed (Code 43 I sold it to someone with a T-Mobile rom and N7100 clockworkrecovery. They updated clockworkrecovery and now the phone just boots into recovery and then restarts. I cannot get the phone to connect to the computer at all. I get an error. I have tried talking with support but they tell me to try everything that I have already done, such as; different usb ports, cords, computers, had the usb port replaced, reinstalling software (all of them), and restarting download mode.
any development?
I have the same problem, device descriptor request failed.
Luckily, im not bricking the phone yet.
Nothing
I gave up on that phone. What have you tried?
upacreekwithoutapaddle said:
I gave up on that phone. What have you tried?
Click to expand...
Click to collapse
Some search on google told me that we need to fix the usb pin.
Im not yet trying it. Im afraid it will cause another problem. So i leave the phone as it. Even though i cant do anything to update the phone. (Maybe i do have change to update the phone, but it will take a risk)
Try to fix your usb port pin.
On the phone? I had the pins on the USB port replaced and I bought a new USB port from China with no help. I also tried 5 different computers (both mac and pc) as well as different oem USB cords.
Sent from my SM-N900T using XDA Free mobile app
upacreekwithoutapaddle said:
On the phone? I had the pins on the USB port replaced and I bought a new USB port from China with no help. I also tried 5 different computers (both mac and pc) as well as different oem USB cords.
Have you solved it yet? I have the same problem here please send the Fix for this.
Thank You!
Click to expand...
Click to collapse

[Q] USB not recognised

Can anyone help me please.....?
I recently updated my Note 4 to lollipop and since then my PC cannot recognise the phone.
I have tried a variety of USB cables.
I have also tried installing the drivers and kies several times.
I have also tried different PC's to resolve this issue.... still nothing.
The phone charges ok ... so no issues on the charging side.
chico1983 said:
Can anyone help me please.....?
I recently updated my Note 4 to lollipop and since then my PC cannot recognise the phone.
I have tried a variety of USB cables.
I have also tried installing the drivers and kies several times.
I have also tried different PC's to resolve this issue.... still nothing.
The phone charges ok ... so no issues on the charging side.
Click to expand...
Click to collapse
Make sure usb debugging is on.
Have you tried putting the phone in download mode, starting odin then plugging the phone in and seeing if odin will recognize it? If that works then download the OB7 lollipop stock tar from the general section and flash it with odin.
Hope this helps. Good luck.
jhill110 said:
Make sure usb debugging is on.
Have you tried putting the phone in download mode, starting odin then plugging the phone in and seeing if odin will recognize it? If that works then download the OB7 lollipop stock tar from the general section and flash it with odin.
Hope this helps. Good luck.
Click to expand...
Click to collapse
Last time i odined the nk2 stock, i forgot to turrn on usb debugging. funny part was inhad no issues with cf auto root...i found it much later when i was going thru settings
Sent from my SM-N910P using Tapatalk
I've been through three Note 4's now - ever since Lollipop I cant mount USB in the OS or in recovery. It's absolutely insane. other Sammy phones are fine - I bring them back into the store and they can't mount anything either - so they give me a new phone.
This one came with Lollipop out of the box, so we activate it and plug it into their laptop. It sees the phone and you can see the device in Explorer. I drive home and some apps update on the way.
Get home - NONE OF MY PCs SEE THE ****ING PHONE!!!!
I'l going to have to kill something now - this makes ZERO sense. I know what I'm doing, I know all about drivers, USB debugging, blah blah. Still these Note 4s just plain won't mount USB. They charge fine but PCs don't see them.
I need to root the damn thing so I can get all my apps back on there but of course ODIN can't see a phone that won't mount.
Any advice? Been dealing with this for two weeks now... I can't find anybody else with a similar issue.

S9 Sprint locked phone G960U won't go passed setupconnection in odin

I've tried different back USB ports, ver 3, ver 2, different USB cable, front USB panel.
I've tried running odin as admin, i've tried many versions of odin
i've tried reinstalling windows.
i've installed proper samsung drivers
i've tried samsung cable
i've tried anker usb c cable
any help?
this is killing me and I gotta find out the issue. I don't have access to other PC's so changing pc is a no go
thanks in advance
I have the same issue, same exact phone... Were you able to solve this problem?..
I have the same issue, same exact phone... Were you able to solve this problem?..
lowrider122 said:
I have the same issue, same exact phonve... Were you able to solve this problem?..
Click to expand...
Click to collapse
Different pc. It's a windows 10 issue on some PCs. No way to fix it. Only other option is to try a2.0 usb hub. Or different pcs.

Categories

Resources