Related
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
What's the wifi scan interval in ARHD 5.1.1?
It seems for me you know the answer?
EDIT: only now understand your question, as i remebmer it didn't change since FroYo, but I can test if you really need to know it..=)
45 Seconds, I honestly didn't know. Had to check myself.
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Thanks for info, honestly never thought about it because used wi-fi only in home/restraunts... so I used it when I need and then turn of..
Dave-Kay said:
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Click to expand...
Click to collapse
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Thank you so much! I bet, it will be same procedure with everything around here, where everyone simply says "flash it with cwm"?
Greets
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Va_Alexander said:
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Click to expand...
Click to collapse
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
topgun06 said:
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
Click to expand...
Click to collapse
Yes it would. But not for radio. Note it please.
EDIT sorry gonna leave you now because my brother's breathing gonna make me drunk.... ))))
Va_Alexander said:
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Click to expand...
Click to collapse
thx
i'm pretty new to this and everyone's speaking as speaking to the experts around here
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
greets
Yes same procedure.
Edit see you tomorrow guys..
Va_Alexander said:
Yes it would. But not for radio. Note it please.
Click to expand...
Click to collapse
Dave-Kay said:
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
Click to expand...
Click to collapse
Nice one! Id flashed to 5.1.1 and then the additional MODs caught my eye and I was just unsure how to flash them.
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Va_Alexander said:
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
Click to expand...
Click to collapse
FOR TO KNOW WHERE ARE YOU IT IS NECESSARY TO KNOW WHEREFROM YOU COME
i I say this for it of not knowing of froyo and yes of gingerbread your "personalized Q&A " is incomplete LOL
Dave-Kay said:
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Click to expand...
Click to collapse
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Same here.
Hi topgun06
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
mike1986. Wrote it in RED:-
Code:
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.2[/B] [02.05.2011][/COLOR] - [B]COMING SOON !!![/B]
- Added Wi-Fi fix
- Fixed Adobe Flash Player
- Removed Voice Commander for Telus / Inspire 4G users due to FC's
- Google Talk updated to latest 1.3
- Some more fixes to locations
- Other minor changes
[COLOR="Red"]- No need to full wipe if you have 5.1.x already![/COLOR]
[SIZE="1"]
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.1[/B][/COLOR]
- Fixed some missing locations
- Fixed microphone issue for Telus / Inspire 4G users
- Added checking signatures hack ([I]Thanks to capychimp[/I])
- Restored original Google Maps 5.3.1
- Rosie Notes Widget should be installed correctly
- Fully working Arabic Patch in the second post
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.0[/B][/COLOR]
- Re-based on new [B]official[/B] HTC Android 2.3.3 RUU 2.36.405.8
- Fully de-odexed, zipaligned, optimized etc.
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
- Google Maps 5.3.1 Premium mod included
- Adobe Flash Player updated to latest 10.2.157.51
- Notes widget updated for Android 2.3.3
- Fixed missing apps in Android Market
- Compatibility changes for branded devices
- Protips removed from system
- Some minor changes
[COLOR="Blue"][B]Android Revolution HD / 4G 5.0 RC1[/B][/COLOR]
- [B]New base 2.36.405.5[/B]
- Fully optimized
- Latest Superuser
- Latest Busybox
- Zipaligned
- Zipalign on boot
- init.d support
- sysrw/sysro
- Cleaned from obsolete files
- All other tweaks / mods incorporated from my 3.x ROMs
- No custom kernel yet but it will come soon!
[COLOR="Blue"][B]Android Revolution HD / 4G 3.7[/B][/COLOR]
- Twitter updated to latest 2.0.2
- Google Maps updated to latest 5.3.1
- Facebook updated to latest 1.5.4
- Adobe Flash Player updated to latest 10.2.157.51
- QuickOffice updated to latest 3.2.178
- Fixed high CPU usage
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
[COLOR="Blue"][B]Android Revolution HD / 4G 3.6[/B][/COLOR]
- New kernel 1.3.8.4 from Apache14
* Stripped down debug info
* Patched up to 32.39
- Lots of new speed tweaks taken from Pyramid ROM
- Improved memory management
- Google Market updated to latest 2.3.6
- Facebook updated to latest 1.5.3
- Fixed mic low volume
- hosts file updated to latest
- HTC bootanimation from newest HTC Sense 3.0
- Added signatures check hack ([I]Thanks to seo[/I])
- Weather finally fixed
- Please do full wipe if you still got weather issues after flashing 3.6
- [B]Please send me mirrors via private message before posting them here[/B]
[COLOR="Blue"][B]Android Revolution HD / 4G 3.5[/B][/COLOR]
- Re-based on official 1.84.661.1 base
- This build seems to be a bit faster
- Sound quality finally fixed and it's much lauder on headphones now
- Added SD Card Speed tweak
- Google Maps updated to latest 5.3.0
- Busybox updated to latest 1.19.0
- Hindi fonts updated
- Superuser updated to 2.3.6.1 FULLY WORKING VERSION
- Weather fix updated. Please flash it only if you have weather sync issues
- Other minor changes and fixes
[COLOR="Blue"][B]Android Revolution HD / 4G older versions changelog - [/B][/COLOR][URL=http://tinyurl.com/6zmktfs]download[/URL]
[/SIZE]
Take Care
TheQuest
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
YES, you only must to flash the new rom _(5.1.2) over the 5.1.1 without wipes.
note: the fullwipe.zip is better for people than flash a lot of times, also you can do full wipe from CWM recovery manually.
*** DISCLAIMER ***
I work on projects that may brick your device. Don't sue me, hate me or try and kill my dog if that happens. I will feel bad the community will feel bad and hopefully we'll find a way to get you going again. But, the very nature of my projects involves a certain amount of risk taken by YOU. And by using the projects that I work on, you've accepted that fact.
WARNING #1: CURRENTLY THERE IS AN UNKNOWN ISSUE WHERE IF YOU HAVE ENCRYPTION ENABLED AND INSTALL SS IT BOOTLOOPS. IF YOU FIT THIS DESCRIPTION PLEASE STAY AWAY FROM SAFESTRAP FOR NOW.
USEFUL LINK OF TW ROMS:
http://forum.xda-developers.com/showthread.php?t=2616221
CURRENT PROJECT STATUS:
v3.72 (NB1): Beta testing, no rom-slots
v3.71 (MK2): Debugging some rom-slot issues
v3.65 (TW4.2): Stable
WHAT IS SAFESTRAP?
Safestrap is a Bootstrap / Recovery for locked bootloader phones. The goal is to avoid touching your primary system (I'll call this "stock" system) and only flash or make large changes to another place on your phone that Safestrap treats as a "2nd system" (in this case, it's a series of virtual ROM slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "Splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of Safestrap is now based on TWRP 2.6.3.0 (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features I've added to TWRP are mostly located under the "Boot Options" menu:
Here you can create virtual ROM-slots (2 on the S4 due to partition size and internal space) for flashing ROMs. These ROM-slots allow for 3 different sizes of /data partitions: 1GB, 2GB and 3GB. NOTE: The bigger you make the /data partition the less room you will have to make other ROM-slots.
You can activate a new ROM-slot by choosing the slot you wish to make active and then selecting the "Activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" ROM active, then you can see it in the top shown in red.
Once a ROM-slot is active, all actions you would normally perform using TWRP are directed to that ROM-slot. For example, "Install" to flash a .zip, backup and restore.
For more information you can read up here:
http://blog.hash-of-codes.com/how-to-safestrap/
HOW DO I INSTALL SAFESTRAP?
Requirement: Root
Requirement: Allow APK install from Unknown Sources
Download the Safestrap APK
Find the APK using a Filemanager tool and open it on your device, then click "Install".
(If updating from an existing Safestrap you might be warned that this will over-write the existing installation. Click the "Yes" equivalent to this message.)
Once installed, open up the Safestrap application as you would any other app.
Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
That's it for the installation! Read below for a brief overview of Safestrap Recovery v3.x
HOW DO I ENTER RECOVERY?
During each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "Stock ROM".
Press under the button shown on the screen to either enter "RECOVERY" or "CONTINUE" booting.
By "under", I mean on the touch key portion of the front display on either side of the center button.
HOW DO I UPGRADE SAFESTRAP?
Push the APK up to your sdcard.
Boot back into the "stock" rom-slot.
Go into your old Safestrap app and use the "Uninstall Recovery" button
THEN, open a "file explorer" of some sort (even TW "My Files" will work)
Browse to where you pushed the APK
Click on it and install like normal
Once installed, open the APK
Grant SU access
Use the "Install Recovery" button
All set, now you can reboot and re-activate whatever rom-slot you were using
KNOWN ISSUES:
[v3.72] ROM-SLOTs aren't supported yet
[v3.72] "Reboot Recovery" doesn't work in the APK?
NEW TO v3.72:
TWRP 2.7.0.x update for the base recovery. This includes vibration support, backup time/date fixes and more.
ROM-SLOTs now have a 16gb size limit (vs 4gb previously) [THEY DON'T WORK YET IN KK THO SO BE PATIENT]
DOWNLOADS:
CONFIRM THAT YOU ARE USING AN AT&T SAMSUNG GALAXY S4 (NOT THE ACTIVE MODEL)
MAKE SURE IF YOU ARE UPGRADING TO v3.7x FROM v3.65 THAT YOU USE THE "UNINSTALL RECOVERY" BUTTON IN THE v3.65 APK BEFORE INSTALLING v3.7x.
NOTE: USE ONLY ROMS THAT MATCH UP WITH YOUR TOUCHWIZ VERSION. IF YOU'RE ON MK2 THEN ONLY USE ROMS BASED ON MK2 AND IF YOU'RE ON MF3 ONLY USE ROMS BASED ON MF3
FIND YOUR STOCK OPERATING SYSTEM VERSION BELOW AND USE THAT FILENAME:
FOR USERS OF NB1:
USE 3.72+:BETA Safestrap-JFLTE-3.72.apk (updated 2014-04-02)
FOR USERS OF MK2:
USE 3.71+:BETA Safestrap-JFLTEATT-3.71.apk (updated 2013-12-27)
FOR USERS OF MF3 (TW4.2):
LATEST FILE: Safestrap-JFLTEATT-3.65.apk (updated 2013-11-15)
Main XDA Downloads Page
Mirror 1 (Goo.im)
Mirror 2 (Crackflashers)
ALSO DOWNLOAD THE KERNEL MODULES .ZIP THAT MATCHES YOUR BUILD # (FLASH THIS AFTER ROMS):
MF3: http://forum.xda-developers.com/devdb/project/dl/?id=508
MK2: http://forum.xda-developers.com/devdb/project/dl/?id=3275
HOW TO MANUALLY REMOVE SAFESTRAP:
[ INSTRUCTIONS ONLY FOR PRIOR TO v3.65. REMOVE VIA APK FOR v3.70+ ]
Enter adb shell from your pc:
Code:
su
mount -o remount,rw /system
mv /system/etc/init.qcom.modem_links.sh.bin /system/etc/init.qcom.modem_links.sh
rm -rf /system/etc/safestrap
rm /system/etc/firmware/q6.mdt
ln -s /firmware/image/q6.mdt /system/etc/firmware/q6.mdt
mount -o remount,ro /system
As of version 3.6x, Safestrap Recovery is now based on TWRP 2.6.3.x. For more on TWRP you can visit their website: http://www.teamw.in/
WARNING: Safestrap is heavily modified to be "Safe" for your device. Do not download TWRP from their website and expect it to work the same way. Also TWRP does not support Safestrap, tho some issues that may come up will be TWRP dependant, please try and contact myself or look on the forums for your device for answers before hunting down TWRP people. They won't be able to help w/ Safestrap specific questions.
This thread is a development ONLY thread.
For discussion go here:
http://forum.xda-developers.com/showthread.php?t=2428254
XDA:DevDB Information
Safestrap Recovery v3.71 (JB) / v3.72 (KK), a Tool/Utility for the AT&T Samsung Galaxy S 4
Contributors
Hashcode, DeesTroy & TeamWin
Version Information
Status: Beta
Current Stable Version: 3.71
Stable Release Date: 2013-12-27
Current Beta Version: 3.72
Beta Release Date: 2014-04-02
Created 2013-09-18
Last Updated 2014-04-02
Reserved
KNOWN ISSUES:
Bluetooth remote control isn't working on rom-slots.
CHANGELOG:
[2013/11/13] TWRP updates
[2013/11/13] "toolbox" binary / symlinks in recovery fixed
[2013/11/11] Uninstall from the APK fixed
[2013/09/17] /sdcard mounting bugfix
[2013/09/17] Hijack improments to support default rootfs files
[2013/09/17] ROM-slot image creation bugfix for size > 2gb
[2013/09/12] Much improved block device handling
[2013/09/11] Bugfix in script translation
[2013/09/11] hijack / init.rc tweaks
[2013/09/11] Bugfix for display lag / buffering issue (WIP)
[2013/09/10] Adjust "ROM-slot" display in UI
[2013/09/10] /data/media handling changes
[2013/09/06] custom twrp.fstab files
[2013/09/06] /data/media handling changes
Reserved
KNOWN ROM INSTALL / ISSUES:
All TW-based ROMs. If you don't have wifi make sure to flash the kernel modules for your stock kernel version.
Looks promising,
Thanks
Sent from my GT-I9505G using XDA Premium HD app
Add the MF3 kernel module .zip to the "Downloads" section.
http://forum.xda-developers.com/devdb/project/?id=680#downloads
Keep this on your SD card and flash it to the ROM-slot AFTER flashing a rom.
This will update your kernel modules to match the MF3 kernel and restore function to: wifi, bluetooth, gps etc.
Thank you so much hash!
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
An at&t thread. Yes! andyfredrick
Sent from my Nexus 7 using XDA Premium 4 mobile app
Hashcode said:
Add the MF3 kernel module .zip to the "Downloads" section.
http://forum.xda-developers.com/devdb/project/?id=680#downloads
Keep this on your SD card and flash it to the ROM-slot AFTER flashing a rom.
This will update your kernel modules to match the MF3 kernel and restore function to: wifi, bluetooth, gps etc.
Click to expand...
Click to collapse
WIFI WORKS!!!!!!!! and so does everything else...
Hash can i backup my stock rom to the external sd card and than delete it so i get my 10gigs back? is that safe?
hope this helps out some people!!.. nice job man!! :good:
Just install gpe wifi gps work! i also went back to stock rom and everything worked perfect
Andrew149 said:
WIFI WORKS!!!!!!!! and so does everything else...
Hash can i backup my stock rom to the external sd card and than delete it so i get my 10gigs back? is that safe?
Click to expand...
Click to collapse
God , no!
Sent from my SPH-L720 using XDA Premium 4 mobile app
rebel1699 said:
God , no!
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well that sucks! i hate having only 3gigs of user space =[
Graviton Rom works on SS... no issues at the moment ...what else are other users using?
---------- Post added at 07:12 AM ---------- Previous post was at 06:51 AM ----------
Can I flash performance mods zips only on slot 1 like killjoy or flyon mod etc? Or no because the stock kernel doesn't have init.d support?
Edit: as long as you flash to slot 1-4 everything will be safe. .. currently using darth stalker rom and that has init.d support, no issues at the moment.
HI
sykoj82 said:
Graviton Rom works on SS... no issues at the moment ...what else are other users using?
---------- Post added at 07:12 AM ---------- Previous post was at 06:51 AM ----------
Can I flash performance mods zips only on slot 1 like killjoy or flyon mod etc? Or no because the stock kernel doesn't have init.d support?
Click to expand...
Click to collapse
HELLO GREETINGS GUYS, GREAT JOB, I HAVE A DOUBT REGARDING THE SAFE ROMS SUPPORT STRAPS, AND ROM VERSIONS
1 - VERSION 4.3 SUPPORT? SS
2 - VERSION 4.2.2 SUPPORT? ROMS SUPPORT IS SS
3-THEME CAN FLASH MOD, ECT ..,?
* FINALLY HAVE MANY ROM Pacht LOKI LOKI IS DEVE install AFTER THE ROM OR NOT ONLY THE MODULE MF3? SORRY FOR MY ENGLISH I AM USING GOOGLE TRANSLATOR .. THANKS ..
HOLA CHICOS SALUDOS ,,GRAN TRABAJO,TENGO UNA DUDA EN CUANTO LOS ROMS SOPORTE PARA SAFE STRAPS,Y VERSIONES DE ROM
1- 4.3 VERSION SOPPORTE?SS
2- 4.2.2 VERSION SOPPORTE?SS CUAL ROMS SOPORTE
3-SE PUEDE FLASHEAR MOD THEME, ECT..,?
POR ULTIMO MUCHOS ROM TIENE LOKI PACHT SE DEVE INTALAR EL LOKI DESPUES DEL ROM O NO SOLAMENTE EL MODULO MF3 ? DISCULPEN POR MI INGLES ESTOY USANDO GOOGLE TRADUCTOR..GRACIAS..
So I've searched and searched, but can't seem to find a clear answer and I want to make sure of this before I try.
My "stock" ROMs are always CM-based 4.3 ROMs (haven't used TW in awhile). I got my S4 when it was still MDL so my qfuse isn't blown - so my intended use for this is only for the additional ROM slots. I have gathered that, at least for now, the only ROMs we can flash to the additional slots have to be TW or GPE 4.2.2. But my question is, does my primary ROM also have to meet that description? Or can I keep my 4.3 AOSP ROM as my primary?
AT&T Error
Hello,
I flashed the GEP rom to Rom Slot 1 and now I am getting an error that says Kernel Fail; System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help. There is a yellow triangle.
I followed the instructions, but now have a hosed phone unless I can somehow restore the backup of my stock rom.
Any information would be helpful.
Thanks for your efforts.
dtruong23 said:
Hello,
I flashed the GEP rom to Rom Slot 1 and now I am getting an error that says Kernel Fail; System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help. There is a yellow triangle.
I followed the instructions, but now have a hosed phone unless I can somehow restore the backup of my stock rom.
Any information would be helpful.
Thanks for your efforts.
Click to expand...
Click to collapse
Oh no...I hope I don't see that. I wish you luck! Was your phone encrypted to begin with?
Does anybody know why it would say this? Now I'm hesitant to flash anymore roms.
sykoj82 said:
Oh no...I hope I don't see that. I wish you luck! Was your phone encrypted to begin with?
Click to expand...
Click to collapse
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
dtruong23 said:
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
Click to expand...
Click to collapse
Wow...so far I flashed 2 different roms...I haven't tried the one you flashed...good luck to u... I'm definitely scared to flash any more roms...but you are 100% positive slot 1 was activated before flashing right? Thats the only thing I can think of that "stock" was activated..
dtruong23 said:
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
Click to expand...
Click to collapse
What GPE rom did u flash?? did u flash the kernel module zip??
Welcome to the Samsung Galaxy Ace II x / GT-S7560M Unofficial FAQ!
-The Galaxy TREND GT-S7560 is also supported-
==>THIS IS AN OUTDATED PHONE AND THE LINKS/FILES BELOW MAY OR MAY NOT BE THERE ANYMORE<==
!!SEE POST #2 BELOW FOR LINKS
Frequently Asked Questions:
1- "Flash with CUSTOM RECOVERY (TWRP/CWM)" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install a custom recovery from the CUSTOM RECOVERIES header in post #2.
2- "Flash with ODIN" : ODIN is inside Daver18qc's Root Kit *With Detailed Instructions* below.
3- "Push with ADB" : You need to download and install Android's Development Kit and then refer to the small tutorial below !
4- If you've got problems with ODIN or ADB, make sure that you have USB Debugging Enabled under Settings > Developer Options.
--Make sure you have only 1 device showing in ODIN (Only 1 little square filled at the top-left)
--Also make sure Kies.exe is not running on the computer!
5- There are custom ROMs, such as CyanogenMOD 10 and 11, OmniROM 4.4, and more. There is no Lollipop ROM just yet, though it is slowly being worked on. A lot of work is needed to update our device code for Lollipop. You can find links to different custom ROMs for our device in post #2.
6- There is NO free method to UNLOCK SIM yet.
7- If you want to flash any deodexed rom with a custom recovery, you must first flash the complete corresponding ROM from SamMobile. That means deodexed Guatemala need to be flashed over Guatemala, not over Panama or Canada. Same goes for deodexed Australia.
8- If you get a Yellow warning triangle on boot after flashing something, use TriangleAway to remove it and reset the flash counter to 0. (On the page, use the provided TriangleAway apk file available for download at the bottom of the first post)
9- Flashing a ROM from Guatemala or Australia will not change your service provider, you will stay with Bell/Koodo/Rogers even if these companies don't exist in Guatemala.
10- Sometimes when flashing ROMS, your carrier will show as "Bell" even though you are on Virgin / Solo, this is normal as these are 2 sub-companies of Bell.
11- When you flash ANYTHING with a custom recovery, be sure to Wipe Cache and Wipe Dalvik Cache (advanced menu) before rebooting.
12- For ANY kind of flashing from a Windows computer, you will need the Samsung USB Drivers first and foremost, before doing anything else. If you're on Linux/Ubuntu, install Heimdall and search for tutorials for how to use it on XDA or Google.
13- If you have the Galaxy Trend GT-S7560 and CWM freezes while flashing a custom rom, then re-cook the rom inside the Kitchen with these tweaks:
Code:
For galaxy trend s7560
When building rom in kitchen, select Interactive Mode(1). after zipaling;
1. edit META-INF/com/google/android/updater-script in working folder and change " format("ext4", "EMMC", "/dev/block/mmcblk0p16"); " to " format("ext4", "EMMC", "/dev/block/mmcblk0p16", "0", "/system"); "
2. extract cm11 for ace 2x and replace META-INF/com/google/android/update-binary from cm11 to your rom
======================================END OF FAQ=============================================
Short Tutorials :
Buttons combinations (phone must be shutdown before !)
Download Mode : VOLUME DOWN+HOME+POWER
Recovery Mode : VOLUME DOWN+VOLUME UP+HOME+POWER
How to "Push with ADB" :
Install the Android Development Kit
Goto "platform tools" folder
Open a command prompt
Connect your phone with USB cable and USB Debugging enabled (developer settings)
Type in the command prompt:
-adb remount
-adb push "yourfilename" "/your/destination"
-adb reboot
example: "adb push SystemUI.apk /system/app/"
How to flash with ODIN :
-If your ROM is zipped, unzip it to a folder until you got a ".TAR.MD5" file
-Load up ODIN
-Shutdown your Phone
-Boot your Phone in Download Mode
-Plug in your USB cable, Odin should recognize the Phone and fill up a small square at the top left.
-Make sure only "F.Reset Time", "Auto Reboot" and "PDA" are check-marked in ODIN
-Load up your ".TAR.MD5" in the PDA section of ODIN
-Flash, wait for ODIN to tell you (Succeeded : 1, Failed : 0)
-Done.
How to flash CM11 (CyanogenMod11) by Alex150892 :
1.Install Australia MH3 stock rom with Odin
2.Download Root Kit and follow instructions inside (follow it carefully from beginning to the end)
3.Open cwm recovery and Wipe data/cache,and also wipe dalvik cache
4.Install CyanogenMod 11
5.Install 4.4 Gapps
6.(optional) Install ba2x kernel for CyanogenMod 11
7.Reboot and enjoy...
Note that first boot will take a while,so leave it for ~10mins
Links:
------CUSTOM ROMS-------
Note: None of the custom ROMs are bug-free. Some of them are more stable and bug-free than others though. Some common bugs among all the ROMs are lack of full camera resolution (the rear camera only captures images at 3MP instead of the 5MP in Stock ROM) and lack of bluetooth (our chipset doesn't support the newer bluetooth method used in Android 4.2+).
CyanogenMOD 10.2/11 by SeannyM UNSUPPORTED
CyanogenMOD 10.1 (Android 4.2.2) by jonypx09 UNSUPPORTED
CyanogenMOD 10.2 (Android 4.3.1) by Codename13 UNSUPPORTED
Beanstalk 4.4.275 (Android 4.4.2) by jonypx09UNSUPPORTED
CyanogenMOD 11 (Android 4.4.4) by jonypx09
OmniROM 4.4.4 (Android 4.4.4) by Codename13
------STOCK ROMS-------
(These are compatible with ALL countries and should be flashed if you want the latest version of ICS on your phone, regardless of where you live or who your phone service provider is.)
Stock firmwares from Sammobile
[URL="http://www.sammobile.com/forum/register.php"]You Must register on SamMobile by clicking here first! (FREE)[/URL]
Modified stock firmware "Stock II X Plus" by Codename13. It is deodexed, rooted, has init.d functionality, has ADB support, doesn't overwrite your custom recovery with the stock one, and other misc. changes, plus it shouldn't trigger the triangle flash counter.
If you install a stock ROM/firmware over a custom ROM and you get a bootloop, meaning you probably forgot to wipe data, and you're unable to boot to recovery, flash this package (by Codename13) with Odin to wipe your data partition, which should allow you to boot into the stock ROM.
------CUSTOM KERNELS-------
Sadman2's kernels for ICS 4.0.4 with GPU Overclock !
-Flash with CUSTOM RECOVERY, Wipe Cache and Dalvik Cache, Reboot.
V1: http://www36.zippyshare.com/v/15770700/file.html : OC CPU 1.2GHZ
V2: http://www43.zippyshare.com/v/33249511/file.html : OC CPU 1.3GHZ
V3: https://drive.google.com/file/d/0BzqKRicqg1wVdl9kQnI4NUk1ZTA/edit?usp=sharing : OC CPU 1.2GHZ GPU 275MHZ
V4: http://www11.zippyshare.com/v/61114227/file.html : OC CPU 1.3GHZ GPU 325MHZ
BA2X (Better Ace 2 X) 2.0 for Stock ROM by Codename13 UNSUPPORTED
SeannyM's Overclocked/Modded Kernels For Stock ROM(Flash with CUSTOM RECOVERY) UNSUPPORTED (I think)
[/B]-A vast range of frequencies to choose from, you can start with 1094mhz and if your phone is stable and doesn't reboot on it's own you can then go up a couple more until you get to a point where your phone won't boot, then you need to go back down in frequencies.
Most people seem to hit a wall around 1248mhz.
-To take full advantage of this Kernel, you should install No-Frills CPU Control
--Set the maximum frequency to the maximum possible
--Set the minimum to 240 or 320
--Set the governor to SmartAssV2
--Set the I/O sheculer to VR
------CUSTOM RECOVERIES-------
List of custom recoveries (thread maintained by Codename13)
http://forum.xda-developers.com/showthread.php?t=2682888
------OTHER-------
Possible fix to CM10.2 WiFi problems suggested by Anas Karbila
-Install that app from the market and use it to correct the problem.
https://play.google.com/store/apps/details?id=co.in.zextr.wcf
Possible fix to ICS 4.0.4 with WiFi problems on Sadman2's Kernels :
-Use a root file explorer to overwrite the original files in /system/lib/modules with those from the link below.
http://forum.xda-developers.com/attachment.php?attachmentid=2630852&d=1394823897
Daver18qc's GT-S7560M Root Kit (With Detailed Instructions!) v.3
Daver18qc's List of Apps that are Safe To Delete (Once Rooted!):Guatemela 'MG2 or Stock ROM
===========================================================================================
That one might be bugged, try the "Stock Guatemala MG2" + "Deodexed Guatemala" below if you have problems!
Daver18qc's Deodexed/Rooted Australia MH3 ROM (Latest 24sept2013) (Flash With CUSTOM RECOVERY Over Australia 'MH3 ROM, Wipe Cache/Dalvik)
===========================================================================================
Daver18qc's Deodexed/Rooted Guatemala MG2 ROM (Flash With CUSTOM RECOVERY Over Stock Guatemala MG2, Wipe Cache/Dalvik) *Confirmed Working*
Thanks to Viper520 for ViPER4Android
Daver18qc's Pack of Modded SystemUI ("Push" with ADB)
-(Download the one with the notifications toggles you want, the others buttons are removed!)
Codename13's ModPack UNSUPPORTED (Flash with CWM) for Deodexed ROMS ONLY!
Codename13's Panama Stock ROM (Flash with CUSTOM RECOVERY)
Codename13's Insecure Stock Kernel (Flash with ODIN in PDA Section)
OstrichX's CyanogenMOD 10.1 Work In Progress Page
Mods made by other people that works on GT-S7560M:
Cbass15's Black Theme AOSP SMS App!
(Delete /system/app/SecMMS.apk, Copy this file to /system/app/ and DON'T RENAME IT, then REBOOT!)
Screenshot of the CBASS15's AOSP Messaging
Dsixda's KITCHEN
You can deodex and customize almost any ROM made for this phone using this version of the Kitchen.
You will need a computer running Linux, either on the hard drive or in a virtual machine inside Windows.
You will need extensive knowledge of the Linux commands as everything is inside a terminal (a kind of MS-DOS command prompt)
If you don't know what Linux is, don't bother, this is out of your reach and nobody will teach you here.
Learn it somewhere else and come back here when you know where you're going with this.
DOWNLOAD 0.223 KITCHEN
DOWNLOAD EDIFY_DEFS FILE
-(The EDIFY_DEFS file is necessary to make a working ROM, you will softbrick your phone if you don't put this file inside your edify-defs folder in the kitchen folder.)
MANY THANKS TO : SeannyM, jonypx09, Codename13, OstrichX and all the others who made this possible!
POST YOUR QUESTIONS IN THE MAIN THREAD HERE PLEASE!
daver18qc said:
FAQ:
6- There is NO free method to UNLOCK SIM yet.
Click to expand...
Click to collapse
till there is some way to unlock the GT-S7560m (hopefully soon)
may i suggest http://forum.xda-developers.com/showpost.php?p=44776737&postcount=1916
unlockclient co
self contained software (means no 24 hour wait for email) takes seconds to do
i searched and search for hours yesterday.. found that one post above
and pretty much nothing else.. the huge 240 page 7560m thread has people asking every second page.. no joke
more info needs to be given about this. and maybe some research on how to do it for free.. but in the mean time:
i took a chance and got it.. and was not disappointed at all (works just like youtube vid)
btw im just a frustrated end user, not affiliated with any company
I would like to download this: Daver18qc's Deodexed/Rooted Australia ROM (Latest 24sept2013) but the DropBox download link isn't working...
Links are dead
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1
mertonv said:
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1
Click to expand...
Click to collapse
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.
Links are dead
Codename13 said:
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.
Click to expand...
Click to collapse
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
looking with the code "S7560MUBAMG2" i found a version PBS, CPA and TCP (panama, panama and mexico), all three have the same build date and change list numbers (05.07.2013 and 1230914)...
im downloading PBS version, its a 532mb file, is that right?... no wonder the device sucks that much... that image is bigger than the stock for my the TF300t... this **** is bloated
is this the same image as guatemala?
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
i wanted to test the slimbean rom but guess i'll have to wait a while then...
the device is slow, but rather have a slow phone than a bricked one for not following the procedure right
this device
Flash with CWM
daver18qc said:
Frequently Asked Questions:
1- "Flash with CWM" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install CWM.
Click to expand...
Click to collapse
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
---------- Post added at 11:16 PM ---------- Previous post was at 11:08 PM ----------
mertonv said:
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
…
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
Click to expand...
Click to collapse
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.
IwasLegend said:
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
Click to expand...
Click to collapse
You did it, since flashing with CWM puts the SUPERUSER program inside the phone. So if you have that, then you have indeed flashed with CWM, because it is the only way to flash the root package!
The instructions in the root kit apply to any other update/package that you want to flash with CWM.
IwasLegend said:
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.
Click to expand...
Click to collapse
@mertonv:
Use Australia MH3 instead. SAMMOBILE got their hosting server shut down so the links for stock firmware are invalid, but they are supposed to get fixed soon, i hope.
EDIT: The Australia Stock ROM link works at the moment, maybe you didn't LOG IN / REGISTER on SAMMOBILE before trying to download and that's why you don't see anything, but at this time, it works !
Bluetooth and Camera still broken/buggy?
Can anyone confirm that there isn't a custom ROM (10.2 or 11) where there are issues with Bluetooth and the camera? I know the FAQ says there are issues but that was in October.
Service
Since flashing CM 10.2, I haven't been able to get service and if somehow I manage I only get it temporarily. Can someone explain as to why?
Downloading Australia MH3
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.
CasMz said:
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.
Click to expand...
Click to collapse
you have to keep refreshing(F5) until it goes to the download.
Does anyone try Triangle Away? is it complete safe?
miki89 said:
Does anyone try Triangle Away? is it complete safe?
Click to expand...
Click to collapse
It's been tested and it's safe, aside from the extremely slim risk of bricking your device while using Triangle Away (but I've never heard of anybody doing this). Chainfire hosts a free version here on XDA, although being free, it doesn't include every feature. But it works well enough.
there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks
thmls said:
there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks
Click to expand...
Click to collapse
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.
Codename13 said:
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.
Click to expand...
Click to collapse
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?
netnoob said:
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?
Click to expand...
Click to collapse
You're using an Ace 2 GT-I8160? This thread is for Galaxy Ace II X GT-S7560M. The two devices are completely different. The only reason that us Ace II X users use the Ace 2 forums is because the names are somewhat similiar. However, don't let that similiarity ruse you.
any kitkat?
Any chance that kitkat makes its way to this phone?...
If it were too... which stock should i load to my phone to be compatible with that?
Which custom rom on jb is the least buggy right now?
Thanks!
Please read the changelog as it will be updated constant before posting.
* Screenshots: Post #3
* Download and Installation: Post #2
* Please do not report issues/enhancements here, use the issue tracker here
* ChangeLog and Features
MUST READ
Click to expand...
Click to collapse
* Absolutely NO XPOSED F/W or Modules supported. This is a daily driver ROM, with deep integration and modification of stock (Samsung) ROM, hence things will break, I assure you!. See FAQ for more detailed explanation as to why I will NOT support it.
* Do NOT install ChainFire SuperSU, as the ROM has built-in CM/Koush Superuser, which I will manage and update if necessary. (And SuperSU completely messes your system binaries, I have no idea what else is botched hence I will NOT support it).
* Follow the DEV thread rules, this IS a dev thread, if you cannot give possible debugging information (logcat, proper replication of the scenario) do NOT post here, go to the general thread here (TODO add link).
* I will only support Stock Kernel (it is included in the DOWNLOADS section), if you are having issues, I would recommend full wipe, flash ROM and flash the STOCK Kernel, reproduce the issue and use my github issue ticketing to report it.ISSUE Reporting Link
* This is daily driver stock themed ROM, if this is NOT what you are looking for I advice you to STOP and move on to another ROM, save that precious bandwidth.
* As this is distributed as a TWRP recovery install file, your KNOX is already at 0x1, duh! don't bother wasting a post whether it will trip KNOX or not.
* Since your KNOX is tripped, removed all KNOX bits does not make any sense.
* Do not ask for ETA, if and when time permits I will release any updates if there are. Use my github issue ticket tracker for any updates to issues. As I am pretty sure the thread will get derailed (and I will only watch it as time permits), creating an issue ticket is your best bet that it will get my attention.
* NO DPI changes supported, although it is available in Settings. A lot of MI7 TW apks are not built for multi-dpi and since I don't support xposed, you are on your own.
* Since the ROM is designed with SELinux Enforcing kernels like Stock Kernel, which also has additional restriction of not allowing adb root. ROM comes built-in with SSH enabled and defaults to root user. You can use the ssh add key in Settings -> Device -> Misc Device Settings to add the key and you can do all the operations untethered .
What is Embryo?
Click to expand...
Click to collapse
In short EMBRYO is your stock/OEM (samsung UVUBMI7 base) ROM, which will have the full support of you hardware (which will be very difficult for any after market ROM to achieve) overlayed with after market (CM/AOKP/SLIM) ROM features as time permits and which fancies my attention .
Needless to say, this is a extremely difficult task and requires very precise skill,understanding of a lot of moving parts (hence the MUST READ section entries) and a lot of patience (I mean a lot). Also I am a stickler for quality and it will show!.
Absolutely NO PERMISSION is given to post this in any other thread or kanging the work.
THEME
Click to expand...
Click to collapse
In the past I have themed EMBRYO roms, but due to time constraints this does not look like a possibility right now, maybe some time in the future. If any themers are willing to take a crack at it go for it and let me know, I will add the links here.
ChangeLog/Features/FAQ
Click to expand...
Click to collapse
They will all be logged here and updated as time permits:
* ChangeLog and Features
* FAQ
* Home Page
02-MAR-2014: EMBRYO-1.1
* bug fix: StatusBar data icon persistence
* bug fix: init.d scripts toggles were not taking effect.
* fix: removed custom carrier label preference.
DISCLAIMER
Click to expand...
Click to collapse
You are assuming all the risk for flashing this. You have been warned.
ISSUES
Click to expand...
Click to collapse
* NavBar transparency requires more work, so it will not work.
* Stock launcher in landscape layout needs fixes when navbar is enabled. I will take any patches
CREDIT
Click to expand...
Click to collapse
- Samsung for the UVUBMI7 base.
- Koush for Superuser (note: I have built it myself to ensure it works with TW roms)
- CM/AOKP/Slim aftermarket ROMs for borrowing various settings code and various inspiration
for adapting Samsung Implementation.
- Paul for the built-in File Chooser.
- Ericson for RootTools
XDA:DevDB Information
EMBRYO-NOTE3, a ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
mohan_kr
ROM OS Version: 4.3.x Jellybean
Based On: TouchWiz - UVUBMI7
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-23
Created 2014-02-24
Last Updated 2014-02-23
Installation and Download
FULL ROM INSTALLATION
Click to expand...
Click to collapse
PLEASE FOLLOW THE STEPS EXACTLY AND IN THAT ORDER, do not try to be cute and invent your own process, nothing good is come out of that. Also, the only recovery I have tested is TWRP, no other recovery has been tested, so the installation instructions are tailored for TWRP only.This is full WIPE ROM Instructions, do NOT dirty flash it is NOT going to work.
Step 0) Make sure you are unplugged and fully charged (no USB or power)
Step 1) Make a Nandroid backup and better yet also TiBu if you need to restore apps.
Step 2) Did you do Step 1)???? Do it now, already.
Step 3) Make sure you downloaded the Full Wipe ROM on to your device.
Step 4) Please make sure to check the md5sum's.
Step 5) Boot into TWRP recovery.
Step 6) Select Wipe -> Swipe to Factory Reset
Step 7) Go Back to Wipe Screen -> Advanced Wipe -> Select System -> Swipe to wipe
Step 8) Did you do Step 6, 7? If not, STOP, do NOT proceed.
Step 9) Go Back to Main Screen -> Select Install Tile
Step 10) Select the Full Wipe ROM zip and flash.
Step 11) [OPTIONAL] If you need any bloat zips and add-ons if available add them now.
Step 12) [OPTIONAL] If there are any EMBRYO Update Zips you can add them now. (SHOULD BE LAST ONE ADDED)
Step 13) I Strongly recommend to Flash the Stock Kernel (MI7), the zip is in the Downloads
section.
Step 14) Good, now reboot and LET IT WAIT till everything is installed. Do NOT touch and mess around with any keys. Your installation should be fine, if you see the bootanimation and then installing applications screen shows up.
Step 15) At this point you might be prompted to allow SuperUser access to ROMCustomizer, select
allow.
Step 16) IMPORTANT Follow Any POST Installation stuff below.
EMBRYO UPDATES INSTALLATION
Click to expand...
Click to collapse
Installation is simple, as the update zip will be available as a TWRP flashable zip. Download to your device, boot into recovery and select install. That's it. If there are any special instructions, they will be in the section where the download zip is available.
POST INSTALLATION
Click to expand...
Click to collapse
Please do the following, after a full wipe installation. After the ROM boots:
1) If you missed the Superuser prompt for ROMCustomizer, please got to Superuser app and
grant privileges to ROMCustomizer.
2) Please NO restoring of system data that is a surefire way to bork the shiny new system.
3) SSH is enabled by default. To upload a public key, push it to your SDCARD and then go to Settings -> Device Tab -> Misc Device Settings -> Add Ssh Key.
DOWNLOADS
Click to expand...
Click to collapse
ROM
Click to expand...
Click to collapse
* [24-FEB-2014] [EMBRYO-1.0]: Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g). Please follow the installation instructions.
- SM-N900T-EMBRYO-1.0-FULL.zip
ROM UPDATES
Click to expand...
Click to collapse
* [02-MAR-2014] [EMBRYO-1.1-Update]: Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g). Please follow the installation instructions for updates in the section EMBRYO UPDATES INSTALLATION
- EMBRYO-1.1-update.zip
STOCK KERNEL
Click to expand...
Click to collapse
* [UVUBMI7] Stock Kernel TWRP flashable. SM-N900T-STOCK-UVUBMI7.zip
BLOAT
Click to expand...
Click to collapse
* [UVUBMI7] Samsung Bloat. APKS that are not installed as part of EMBRYO full rom. NOTE they are installed in system partition.
- UVUBMI7-Samsung-Bloat.zip
* [UVUBMI7][TMO] T-Mobile Bloat.
- UVUBMI7-TMO-Bloat.zip
Click to expand...
Click to collapse
Screenshots
See the attached thumbnails to this post.
Another One
final one.
Upload
Upload in Progress..as soon as it is up I will create a post. Patience.. see post #2.
This sounds like you out a ton of work into it. I definitely must give this a run.
Sent from my SM-N900T using Tapatalk
Download link
Post #2 has the download link..I will update the changelog/features to give more information on how to use the ROM. Enjoy!
mohan_kr said:
Upload in Progress..as soon as it is up I will create a post. Patience.. see post #2.
Click to expand...
Click to collapse
downloading now. . . feedback will follow
http://www.androidfilehost.com/?fid=23329332407573846
That's for the kernel for some reason the link you put there say's access denied when you go on it.
Sent from my SM-N900T using xda app-developers app
This is very very good. I really have no issues yet. It has a remarkable "wow" factor, even when installing. Very well done.
Sent from my SM-N900T using Tapatalk
Great job on this Rom!
Sent from my SM-N900T using XDA Premium 4 mobile app
Uploaded zip
Uploaded all the Samsung and T-Mobile APKS that are not included as part of the ROM. By default they will be installed in system partition. Since I did not investigate fully what can be moved to data. If you know that you can push the apks in /data/embryo/preload and use the Package Management from Settings -> Device to install them..
Is anyone running this how is it?..
Sent from my SM-N900T using Tapatalk
demon28 said:
Is anyone running this how is it?..
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
so far . . no issues here...
Question, can you go back to 4.3?
Sent from my SM-N900T using Tapatalk
demonchildfp said:
Question, can you go back to 4.3?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Rom is 4.3
Yep.....I feel like a retard......
Sent from my SM-N900T using Tapatalk
Wow - this is quite a piece of work here. Had to take it for a spin - no issues to report but wanted to pop in and say holy crap man, this is awesome! The navbar stuff alone... it makes my head hurt. Far better than anything I could ever muddle together that's for sure. Glad you finally got the time to share this - work like this doesn't come around very often, so for that I say - thanks!
Great job man!
Downloading now.. maybe I can find some time and see if my themes are compatible and if not I can make em compatible. Sounds like a awesome rom
Does anybody have a copy or link to the stock kernal? It says access or no such file on the link provided in the o.p. thanks
**************************************************
[ROM] 6045Y-DCZ
current version 2.2 (2016-08-09)
STOCK, STABLE, FAST, ROOT
**************************************************
FOR NOW IT IS ONLY FOR SINGLE SIM DEVICES!! DUAL SIM NOT WORKING
-it is not exactly a build. Its more a mod.
-based on latest Alcatel IDO 3 5.5 6045Y MMB29M EUROPE UPDATE
-including ROOT (latest supersu 2.76)
-removed all unnecessary apps from Alcatel. there is only the necessary basic to run the phone. All other things you can download by yourself.
-Due to source is the avaliable set of languages shrinken to English, German, Slovak and Czech. But More Locale 2 app (included) will do the trick for you on most apps.
GUIDE:
-Its always better to flash this upon a stock firmware. You can try to flash it upon custm roms like CM AOKP etc, but since i havent tested it, i dont know if it will 100% work
-download firmware and also the MD5 checksum and copy both files to your phone.
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-make backup of your current ROM
-here you can grab a bat file to make backup of your curent MODEM, or download your MODEM in a zip file. Don´t forget to thank @famewolf for the time he spends to gather the modems.
-If you hav ebackup of oyur curent modem, just open my ROM zip in a ZIP app (i use 7zip). Replace the non-hlos.bin with your non-hlos.bin (modem) file.
-copy the ROM (and if you choose the modem zip file from @famewolf )
-wipe chache/dalvik/system/data
-format data (just to be sure. Format data is something diferent than wipe data)
-install ROM (make sure you have MD5 check enabled and it gives no error)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk
ISSUES:
-on my 6045Y i have no issues so please report
changelog in 2.2 build (2016-08-09)
-parallax background on stock launcher (looks great)
-translucent appdrawer background
-cleared updater-script of useless lines
changelog in 2.1 build (2016-08-08)
-build from latest 6045Y 010 06 update (6045Y MMB29M EUROPE UPDATE)
-no need to do some silly unmount and mount crap, because i know how to write the updater-script
-Root (systemless) included, GAPPS included (as this is just a moded stock ROM)
-Debloated 6.0.1 version..lockscreen is working well for my on 6045Y
-Background wallpaper from Vikas Kanwal (no stealing from web)
-Included 6045Y modem, so if you are on non 6045Y version see above to get your corespondent modem zip fle or image file before you start flashing.
-Security patch for 6.0.1 (from 2016-1-7)
-Double tap on lock screen to sleep
-Launcher 5x6 and dock 5x grid (instead of 4x5)
-lcd density set to 430
-USB debuging enabled from first boot
-Color temperature setting
-Technicolor enhanced colors
-Call recorder - when you are in a call you can tap on the three dots on the right and record the call
-Multi window enabled (under sttings/developer option)
-Glove mode (higher sensitivity of touchscreen)
-Three fingers swipe to make screenshot
CREDITS:
@Unjustified Dev , @famewolf , @The Marionette, without them there will be no IDOL 3 5.5 develpment, so pelase give them a thnax!
And of course i am not responsible for any damage you do by flashing this on your device!
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
famewolf said:
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
Click to expand...
Click to collapse
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
DallasCZ said:
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
Click to expand...
Click to collapse
Sounds like you have all the bases covered! What a shame we can't get multirom to work on our device YET....it would allow us to use our external sd to swap between multiple roms and I could have cm12.1, yours and whatever new one I'm testing all going at the same time. Multirom also has it's own custom build of twrp that supports the roms.
i know i have used MULTIROM on my older devices...
DallasCZ said:
i know i have used MULTIROM on my older devices...
Click to expand...
Click to collapse
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
famewolf said:
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Click to expand...
Click to collapse
My fault i wrote twice unmount system.... hmm thats when you make such things at 2:00 AM
thanx bro.
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
I participate in the development but the creator of the kernel is @acura2201 should also include in the credits, also a link to the original kernel thread in HTCMania
thx,good job
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
The Marionette said:
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
Click to expand...
Click to collapse
As it does not rewrites original recovery neither radio files it should be good to all variants, but I have not tested (only on my 6045Y).
the second thing is the OC kernel from HTCMANIA.com if it will be working on 6045I,6045O nad 6045K variants.
If someone with dual sim (K version) would try it and has no dual sim options there have to be a slightly build.prop modification. Just change line "persist.radio.multisim.config=single" to "persist.radio.multisim.config=dsds".
someone should try...If he made a full TWRP backup, there is nothing to worry about (i think)
famewolf said:
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
Click to expand...
Click to collapse
You re right as always i mentioned it on 1st post.
DallasCZ said:
Suprisingly no. I used the group1 OC kernel and i am running on it since yesterday and no hicups,lags or reboots.
Click to expand...
Click to collapse
*removed half asleep post since you had already added link to post #1*
I'm surprised the chinese rom had higher antutu scores than cyanogenmod but I'm looking forward to having a rom that flips "upside down" properly.
Edit: Disregard what I said below, I just looked at the page again without it being translated and found the link, I think. Wow, translators really make a mess of a page. Is this the correct file/img...."Nuevoboot_Alcatel_V1.img"?
I'd like to try this but the link to HTC Mania translates horribly, it's a absolute mess. I cannot find the download link for the Group 2 OC Kernel (6045i) anywhere on that page. Can direct links be posted?
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomoc�* Tapatalk
Click to expand...
Click to collapse
Well, I have tried that one as well, and it doesn't boot. So I guess its for stock ROM? Haha.
Disregard previous information, apparently the kernel in the thread changed somewhat since the last time I downloaded it. Testing again, boots up with the group 2, will report back.
capeorigins said:
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
Click to expand...
Click to collapse
You should talk about cm in the cm thread..thats what it's for. Group 1 and group 2 is only for "stock" roms. the i806 falls under "stock rom". Roms like cyanogenmod should be running the CM kernel on that page. It's part of the name and not either of the groups.
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
@DallasCZ
What min/max/governor are you choosing for big & little in KA?
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
xStealth said:
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
Click to expand...
Click to collapse
Most folks could choose 1601 but their phone was rarely actually at that speed...people experiencing reboots should check their cpu temp in KA...in every case I encountered a reboot checking it right after boot showed it was still quite high and more than likely the cause of the reboot. You should however be able to set it to 1300 without issues.
I wouldn't use performance or interactive as they had all 4 cores going way to much of the time allowing temps to rise.....try "wheatley".