HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
What's the wifi scan interval in ARHD 5.1.1?
It seems for me you know the answer?
EDIT: only now understand your question, as i remebmer it didn't change since FroYo, but I can test if you really need to know it..=)
45 Seconds, I honestly didn't know. Had to check myself.
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Thanks for info, honestly never thought about it because used wi-fi only in home/restraunts... so I used it when I need and then turn of..
Dave-Kay said:
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Click to expand...
Click to collapse
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Thank you so much! I bet, it will be same procedure with everything around here, where everyone simply says "flash it with cwm"?
Greets
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Va_Alexander said:
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Click to expand...
Click to collapse
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
topgun06 said:
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
Click to expand...
Click to collapse
Yes it would. But not for radio. Note it please.
EDIT sorry gonna leave you now because my brother's breathing gonna make me drunk.... ))))
Va_Alexander said:
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Click to expand...
Click to collapse
thx
i'm pretty new to this and everyone's speaking as speaking to the experts around here
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
greets
Yes same procedure.
Edit see you tomorrow guys..
Va_Alexander said:
Yes it would. But not for radio. Note it please.
Click to expand...
Click to collapse
Dave-Kay said:
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
Click to expand...
Click to collapse
Nice one! Id flashed to 5.1.1 and then the additional MODs caught my eye and I was just unsure how to flash them.
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Va_Alexander said:
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
Click to expand...
Click to collapse
FOR TO KNOW WHERE ARE YOU IT IS NECESSARY TO KNOW WHEREFROM YOU COME
i I say this for it of not knowing of froyo and yes of gingerbread your "personalized Q&A " is incomplete LOL
Dave-Kay said:
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Click to expand...
Click to collapse
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Same here.
Hi topgun06
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
mike1986. Wrote it in RED:-
Code:
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.2[/B] [02.05.2011][/COLOR] - [B]COMING SOON !!![/B]
- Added Wi-Fi fix
- Fixed Adobe Flash Player
- Removed Voice Commander for Telus / Inspire 4G users due to FC's
- Google Talk updated to latest 1.3
- Some more fixes to locations
- Other minor changes
[COLOR="Red"]- No need to full wipe if you have 5.1.x already![/COLOR]
[SIZE="1"]
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.1[/B][/COLOR]
- Fixed some missing locations
- Fixed microphone issue for Telus / Inspire 4G users
- Added checking signatures hack ([I]Thanks to capychimp[/I])
- Restored original Google Maps 5.3.1
- Rosie Notes Widget should be installed correctly
- Fully working Arabic Patch in the second post
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.0[/B][/COLOR]
- Re-based on new [B]official[/B] HTC Android 2.3.3 RUU 2.36.405.8
- Fully de-odexed, zipaligned, optimized etc.
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
- Google Maps 5.3.1 Premium mod included
- Adobe Flash Player updated to latest 10.2.157.51
- Notes widget updated for Android 2.3.3
- Fixed missing apps in Android Market
- Compatibility changes for branded devices
- Protips removed from system
- Some minor changes
[COLOR="Blue"][B]Android Revolution HD / 4G 5.0 RC1[/B][/COLOR]
- [B]New base 2.36.405.5[/B]
- Fully optimized
- Latest Superuser
- Latest Busybox
- Zipaligned
- Zipalign on boot
- init.d support
- sysrw/sysro
- Cleaned from obsolete files
- All other tweaks / mods incorporated from my 3.x ROMs
- No custom kernel yet but it will come soon!
[COLOR="Blue"][B]Android Revolution HD / 4G 3.7[/B][/COLOR]
- Twitter updated to latest 2.0.2
- Google Maps updated to latest 5.3.1
- Facebook updated to latest 1.5.4
- Adobe Flash Player updated to latest 10.2.157.51
- QuickOffice updated to latest 3.2.178
- Fixed high CPU usage
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
[COLOR="Blue"][B]Android Revolution HD / 4G 3.6[/B][/COLOR]
- New kernel 1.3.8.4 from Apache14
* Stripped down debug info
* Patched up to 32.39
- Lots of new speed tweaks taken from Pyramid ROM
- Improved memory management
- Google Market updated to latest 2.3.6
- Facebook updated to latest 1.5.3
- Fixed mic low volume
- hosts file updated to latest
- HTC bootanimation from newest HTC Sense 3.0
- Added signatures check hack ([I]Thanks to seo[/I])
- Weather finally fixed
- Please do full wipe if you still got weather issues after flashing 3.6
- [B]Please send me mirrors via private message before posting them here[/B]
[COLOR="Blue"][B]Android Revolution HD / 4G 3.5[/B][/COLOR]
- Re-based on official 1.84.661.1 base
- This build seems to be a bit faster
- Sound quality finally fixed and it's much lauder on headphones now
- Added SD Card Speed tweak
- Google Maps updated to latest 5.3.0
- Busybox updated to latest 1.19.0
- Hindi fonts updated
- Superuser updated to 2.3.6.1 FULLY WORKING VERSION
- Weather fix updated. Please flash it only if you have weather sync issues
- Other minor changes and fixes
[COLOR="Blue"][B]Android Revolution HD / 4G older versions changelog - [/B][/COLOR][URL=http://tinyurl.com/6zmktfs]download[/URL]
[/SIZE]
Take Care
TheQuest
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
YES, you only must to flash the new rom _(5.1.2) over the 5.1.1 without wipes.
note: the fullwipe.zip is better for people than flash a lot of times, also you can do full wipe from CWM recovery manually.
Related
Oxygen Forums has moved to http://forum.oxygen.im/
This is the FAQ for the ROM Oxygen Produced by AdamG.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello all,
This is going to be the new place to ask for help and receive answers to your most challenging questions about Oxygen.
I have taken the time to make this FAQ for you all so we can try and keep a lid on the countless Questions being asked again and again in the thread, inevitability getting lost in translation and posts.
Please Continue!
Basics First!
New to Rom's, Flashing and developing in general?
Start here
Then here
Turkeys Ultimate guide to root
Recent Changes Oxygen 2.1.3
Features
Android v2.3.4 (GRJ22) built from AOSP
Linux kernel v2.6.35.x
Minimal Google apps
Superuser
Busybox
Apps2SD
Adhoc wifi network support
Advanced power menu with reboot options
Customizable auto backlight settings
Customizable status bar power widget
Download any file type
FM Radio
Improved widget picker
Long press back to kill mod (must be activated in Oxygen Settings)
Optional battery percentage
Text reflow when zooming
Various other tweaks and features
************************* READ ME *******************************
*****************************************************************
* Market downloads are now stored on the SD card because Google *
* increased the maximum app size to 50mb, the /cache partition *
* on some HBOOT partition layouts are under this size so some *
* larger apps will fail to download, if you have any problems *
* with downloading market apps, delete the "Android" folder on *
* your SD card and reboot, you should have no problems then. *
*****************************************************************
*****************************************************************
Known Bugs
None...
Bugs Tracker
Here is the LINK to Adams Bug tracker, Please post all found bugs here!
What's Oxygen?
(snippet from AdamG frontpage):
Oxygen ROM is an AOSP source built ROM (ie. not a mod of any sense based ROM), it's minimal, it's superfast and 99.9% bugfree.
After OpenDesire, I wanted to create something unique, as a fellow developer said to me there is no point there being 3 ROMs based around the same code (CM/OD/DF), I grew bored and lost interest in OD because it no longer felt special and it just felt like a race to release the latest CM code against DF, which was 1 pretty lame and 2 damn right depressing. When I initially started OD it was unique and it's popularity grew exponentially as it was the first Froyo AOSP ROM available for the HTC Desire at the time and a real alternative to the dull, dark and nasty HTC bloatware.
Oxygen is not a mod/port of any HTC/CyanogenMod or any other ROM and may not be to everyones liking, it's minimalistic and basic but I'm open to ideas and suggestions for improving the ROM.
Screenshots
How do I Install OxygeN?
This thread made by Benko286, Explains in detail how to install ANY rom on HTC desire, with easy and complex guides Here
Make sure you already have a custom recovery installed
ie: Clockwork or Amon-RA.
Clockwork / Amon-RA
S-OFF?
***Please be aware***
Good news to all pvt4 (different NAND security version of desire) with erasesize 40000 and 20000:
PVT4 can now be S-OFF'd
AlphaRev 1.8 HBOOT reflash utility
How to S-OFF your Desire using the reflash utility - By AndroidGX
http://*******/2GajZ
custom HBOOT for erasesize 40000 and 20000 now available.
To Check erasesize use the adb command below
Code:
adb shell cat /proc/mtd
Output should look like this.
mtd0: 00100000 00040000 "misc"
mtd1: 00480000 00040000 "recovery"
mtd2: 00340000 00040000 "boot"
mtd3: 0fa00000 00040000 "system"
mtd4: 02800000 00040000 "cache"
mtd5: 096c0000 00040000 "userdata"
All models can now be S-OFF'd
What's S-OFF?
Quoated from the alpharev
HTC implemented security on their newer generation phones. This flag, called @secuflag, controls whether your phone has
it's NAND or flash unlocked. Most noticeably, S-ON (security on) will read-lock your /system and /recovery partition, to name a few. Also, secuflag controls whether zip files being flashed through recovery or fastboot, are signed by HTC.
The now notorious S-OFF (security off) will disable this NAND security.
Since we are unable to access the Radio NVRAM itself (where secuflag is stored), we turned our attention to HBOOT.
Click to expand...
Click to collapse
http://alpharev.nl/
Detailed S-OFF instructions by AndroidGX
Once you have S-OFF'ed you can flash a different partition table Ie: data++, Sense, Stock 1.5 and N1Table.
For Oxygen it is recommended to flash OxygeN HBOOT, Although you can flash data++ and N1table with no problems.
OxygeN HBOOT
Their is now a specific Oxygen HBOOT provided by alpharev.nl.
AdamG: I would like to recommend that people who intend
to use Oxygen as their main ROM use the AlphaRev Oxygen HBOOT,
this is a customized HBOOT specifically for Oxygen and features a
massive /data partition, allowing you to install even more apps
than previously possible.
Click to expand...
Click to collapse
To install:
Ubuntu :
1) Nandroid backup in recovery. (on your phone)
2) Verify the MD5SUM of the file you downloaded against the one in the table.
Code:
md5sum bravo_alphaspl-oxygen.img
3) Flash Oxygen HBOOT with your phone in fastboot mode (fastboot is a command line program used in the android sdk)
To enter fastboot press = (Back+POWER) -> open up a termon ubuntu or on windows, a CMD shell, then enter the below
Code:
fastboot flash hboot bravo_alphaspl-oxygen.img
(change into the correct filename for the HBOOT you downloaded)
4)Then
Code:
fastboot reboot-bootloader
5)Then
Code:
fastboot erase cache
6)Boot into recovery, flash oxygen-rom, wipe all and Reboot.
Fastboot and ADB Setup Instructions
ADB
ADB setup Windows
Fastboot
Ubuntu Instructions by wddglr
Windows Instructions by mazodude - Even tho this is for Nexus, The process is exactly the same
Ext3 partition removal
With the new OxygeN HBOOT their is no longer a need for ext3 (in fact its slower), So to remove it you will need to download something like Gparted to manage the partition tables on your sdcard.
Delete the ext3 partition and completely reformat the card to fat32
Then install the new Oxygen HBOOT,
Then wipe cache's /all,
Then install OxygeN.
Radio
If your using the Oxygen Hboot you WILL need to flash any radios via fastboot!
Using ADB from either a terminal or command line, enter the below...
Code:
fastboot flash radio radio.img
Remember to extract the radio.img from the .zip before hand!
TIP! = Having the radio.img in the tools folder of the SDK, or wherever your adb program is makes life easy..
Recommended Radio
Here - 32.44.00.32U_5.09.05.30_2
Download Oxygen
To download Oxygen click HERE where you will be redirected to AdamG's thread on Oxygen.
Download is near the end of post 1!
Thalamus Kernels for oxygen 2.0.+
To test a new kernel if you experience any issues at all, you can try these made by thalamus.
http://thalamus.ineige.org/kernels/
To install ...
- Boot into Recovery
- Flash the required kernel .zip
- Reboot
Oxygen FAQ
More EXCELLENT answers from MattMan83 - Here
Code:
[COLOR="Green"]Q: How do I use OxygenUpdater[/COLOR]
A: Read this excellent tutorial [URL="http://*******/2Gana"]here[/URL]
Q: [COLOR="Green"]Help I get a FC with ...[/COLOR]
A: Perform a wipe, 99% of the time this solves all problems
Q: [COLOR="Green"]I can't flash any radios, with OxygeN Hboot![/COLOR]
A: If your using the Oxygen Hboot you WILL need to flash any radios via fastboot!
Q: [COLOR="green"]The keyboard doesn't have my locale dictionary[/COLOR]
A: Check the following thread [URL="http://*******/2Gaot"]here[/URL] for an alternative IME
Q: [COLOR="green"]How can I change the stock Launcher[/COLOR]
A: Go to Settings > Apps > Permissions > Clear data for Zeam. Press home, choose Launcher and highlight "use as default" **remember to download another launcher from the market first**
Q: [COLOR='green']Do I need to do a full wipe? [/COLOR]
A: You shouldn't have to if coming from RC7 or DevNull, however if you have any issues with stability or features not working you will be asked to perform a full wipe + reinstall before we can help you.
Q: [COLOR='green']What A2SD does this support? [/COLOR]
A: Oxygen 2.0 supports "froyo style" apps2sd, it also supports A2SD with an EXT3 or EXT4 partition. By default the dalvik cache is not moved to SD for performance reasons - [URL="http://*******/2GapT"]see here[/URL]. D2SD/D2W scripts will work - but please take this up in their respective threads if you have questions to ask.
Q: [COLOR='green']My battery is draining too fast - what the?[/COLOR]
A: This is a peculiarity of GB rom's at this point. Change your wifi settings to never sleep and problem solved - seems a little back to front but it works! (thanks earanor)
Q: [COLOR='green']Why don't some apps show in market - they did before?[/COLOR]
A: In the final release of this ROM the market fingerprint was updated to reflect that you're now running 2.3.3. If an app does not show it means it may not be compatible with Gingerbread - you should contact the App dev regarding this. [URL="http://*******/2Gaq3"]See here[/URL]
Q: [COLOR='green']Why is this missing? [/COLOR]
A: OJ Wake/Track Change/Quiet Hours Google changed alot of the underlying code in the 2.3.3 update which broke a few things. These features are being actively worked on but are currently not functioning - an update will be released at some point to restore these features, but there is no ETA currently. UPDATE - FM Radio is back in 2.0.1 - thanks AdamG
Q: [COLOR='green']Does HTC Sync/ x sense app work with this?[/COLOR]
A: No, and they never will. This is not a HTC ROM - therefore HTC features are not here. Sense apps require massive amounts of framework changes to run and at this point in time it's simply not worth the effort. If you MUST have your sense app - run a sense rom.
Q: [COLOR='green'] My USB transfers are slow/VPN doesn't work? [/COLOR]
A: This is an issue in the latest .37 kernels. Thalamus has kindly updated a .35 kernel to be compatible and is available [URL="http://thalamus.ineige.org/kernels/2.6.35/"]here[/URL]. 2.35.11r5 currently recommended. 2.35.11 build will also fix your VPN - .37 VPN implementation is currently incompatible with Android (thanks _thalamus!)
Q: [COLOR='green']Why can't I see my wireless network?[/COLOR]
A: It's a minor bug in the 2.37.2 kernel launched with Oxygen 2.0.1 - simply update to the latest .37 build[URL="http://thalamus.ineige.org/kernels/2.6.37/"] here[/URL] and all will be resolved. Later releases of Oxygen will include the fixed kernel. (thanks _thalamus).
Q: [COLOR='green']Automatic backlight is too dark - how can i fix?[/COLOR]
A: AdamG posted his fix [URL="http://*******/2Gaqy"]here[/URL] - UPDATE from 2.0.1 auto backlight should be fine so long as you full wipe before install.
Q: [COLOR='green']Where did 720P recording go?[/COLOR]
A: Google did not include 720P recording in the Nexus One 2.3.3 update that AdamG needed to pull video recording from - therefore it's not in here either. Unlike other roms which employ hacks to enable 720P recording, Oxygen is kept clean and hack free to keep your user experience as good as possible. Video quality however IS STILL GOOD! You can't watch 720P back on a Desire screen anyway.
Q: [COLOR='green']Do i need to be S-off or have Oxygen hboot?[/COLOR]
A: No, the rom will work S-on and with any hboot layout. However the recommender set-up is S-off and Oxygen hboot (thanks TheGhost1233)
Add-on's, Themes, Tips!
Add-on's
HTC IME - Here (if you keep getting FC's, check its installed on internal memory!)
ADFREE - can be downloaded from the market.
ADFREE PLUS - Made and maintained by Dnlgee! A much better adblocker!
This is a flashable .zip (in recovery) by Dnlgee (AdFree only uses the MVPS database which isn't updated too often.. So I use MVPS, Peter Lowe's and Host-File.net to increase the amount of ads and tracking sites blocked. This also includes some referral sites.) Download HERE Please remember to say thanks if you see him about!
Music app from HONEYCOMB with Sync! - Flashable .zip made by me! - Here..
Original Gingerbread Music.apk - Download from my Dropbox - Signed flashable .zip
Menu Wake MOD ON (flashable.zip) - Here Flash via recovery! Made by Me!
Menu Wake MOD OFF(flashable.zip) - Here Flash via recovery! Made by Me! to Revert back to normal.
Bootanimation for Oxygen (original) - Here
Wallpaper for Oxygen (original) - Here
The NEW Market 2.2.7 - Here *(signed test-keys)*
Black Market 2.2.6(old style) - Here by djDarkknight96 This is the normal market old style just in black!
3D Gallery (high res) - Here by Number22
2D Gallery (old) - Here
GAPPS (Google standard apps) - Here
GenieWidget.apk - Here This is the stock news and weather widget should you need it!
Themes
ClockR MOD - Here (this is very, very cool mod, check it out!) by zehro
Kbanause Theme - Here by Kbanause -Must see!
Battery % Mod - Here by classicalGas
PureOxygen MOD - Here by Jazzk
Circles Mod Oxygen - Here. - Must see! by Hooolme
ProperBlack Theme for Oxygen - Here Nice theme mod, Check it out! by str355
Oxygen RC2 theme by rover.prince - Here, Check it out for screen shots! *added circles mod to theme Updated 23/12/10*
INexus port for Oxygen - Here by dboy0911! Check it out!
UOT Kitchen - Here UOT kitchen is a complete Theme making kit, for instruction visit the link supplied! (for 1.0.4)(just batt symbol on RC1 gingerbread)
Android Theming and Tweaking V2 - Here A complete Theming and tweaking solution for Android by Shoey-n
Green Icons Oxygen v2 RC1 - Flash the zip downloaded from HERE
Tips
Oxygen Updater - The updater is located in your app draw on your desire!, To use just open it up, and click "check for updates" after a successful download you can either flash the zip right away or quit and reboot into recovery and do a nandroid backup first (Highly recommended)
Market Issue (No comments shown) - In order to see the comments, You must remember to set your locale in settings first!. (This also sorts out numbers issue on the gingerbread keyboard). Thanks to bernabap
Youtube & Google Maps FC's (force close's) on RC3 - Install Youtube from the market. Then If any more problems, Uninstall and reinstall again, seems to sort it.
DropBox *extra 250mb with this link* - Use this to sync files from your Pc and Android phone automatically. Highly recommended.
Make Flashable .zip files Thanks to Dakata
OxygeN FaQ. PDF Download 308kb. - Updated 4/1/2011
Please, Please, Please PM for me to add more info, this is for everyone's benefit! Many thanks
Great post!
Would love if Adam could implement a music script(?) to control eg. spotify from the volume buttons (next, prev song)
Hi!
If someone could help me making the DPAD Wake working again would be appreciaty it Tried the old stuff but didn't work out:/
neonlovag said:
If someone could help me making the DPAD Wake working again would be appreciaty it Tried the old stuff but didn't work out:/
Click to expand...
Click to collapse
I have no idea if this will work but worth a go! LINK
But better be safe and Nandroid first!
Also if successful let us know
weird thing about the new market posted above is that if i upgrade it without deleting the old data, it would work fine but if i delete the data of the market, it will begin to fc. it does not happen in the old market. so full wipe + using the new market will certainly fc on me with "requires com.google.android.providers.settings.permission.WRITE_GSETTINGS" in the logcat. this will happen after i accepted the terms and conditions.
Thanks but unfortunately it isn't working, I have allready read the whole forum, all the other post to, and I compared the related files from line to line, caracter to caracter, it is 1:1 like in other roms with working d-pad unlock... but it does not work in 2.3 oxygene:/
neonlovag said:
Thanks but unfortunately it isn't working, I have allready read the whole forum, all the other post to, and I compared the related files from line to line, caracter to caracter, it is 1:1 like in other roms with working d-pad unlock... but it does not work in 2.3 oxygene:/
Click to expand...
Click to collapse
Hmm, Must be some core files missing from the complied rom then, im sure RC2 will fix this
Yeah until then I'll buy a bigger hand to reach to top of the phone
potter1984 said:
Hmm, Must be some core files missing from the complied rom then, im sure RC2 will fix this
Click to expand...
Click to collapse
wow all this zip files and apk files and adb stuff..
how do i install the new market, everywhere i look i see the files but not how to install them, or if i should remove the old market.
anyone got a link or something? just want the new market to replace my old one
o0micha0o said:
wow all this zip files and apk files and adb stuff..
how do i install the new market, everywhere i look i see the files but not how to install them, or if i should remove the old market.
anyone got a link or something? just want the new market to replace my old one
Click to expand...
Click to collapse
The new market is clearly marked under Extras, Its a flashable zip, I actually tested it myself earlier and can confirm its working as intended.
Just boot into recovery, your clockwork mod, and flash just like a rom update!
Hope that helps
wow it's that simple =), thanks man this worked
i flash oxygen w/o wiping. now my htc desire hangs at boot (stuck at the oxygen boot animation).
I cant get to recovery/bootloader menu by holding volume down button (used to be able to).
any tips?
edeimar said:
i flash oxygen w/o wiping. now my htc desire hangs at boot (stuck at the oxygen boot animation).
I cant get to recovery/bootloader menu by holding volume down button (used to be able to).
any tips?
Click to expand...
Click to collapse
Go back into recovery and re-flash the RC2 but make sure you Wipe all caches!
Its needed as a new signed test key is used in this build
Is there to be openvpn client for this Rom?
Thanks.
Do you know if it is possible to get the old 2D Gallery that was in the earlier versions of Oxygen on RC2?
I searched through the main oxygen thread and couldn't find anything.
Sherwood W said:
Do you know if it is possible to get the old 2D Gallery that was in the earlier versions of Oxygen on RC2?
I searched through the main oxygen thread and couldn't find anything.
Click to expand...
Click to collapse
Just added try it out and let me know
Hi guys,
I'm having a problem:
When I flashed this rom, the homescreen comes and I can login with my gmail account but after that, the phone keeps rebooting. I don't know why. I use a 8gb sd card with 2gb ext4. I only have this problem with Oxygen roms, not with any HD or MIUI roms, but only with the oxygen roms. The oxygen roms are the fastest and best roms, but it keeps rebooting.
Sorry for the bad english.
potter1984 said:
Just added try it out and let me know
Click to expand...
Click to collapse
Thanks I removed Gallery3D and installed the one in the first post and worked fine. The only annoying thing that I've just noticed is that say in launcher pro and you select change icon it puts all the images together instead of showing it in the different folders like it does when you open it up on it's own.
Thanks for uploading it
Thanks for this thread. It would be great if you could add some comments on what each add-on is (e.g gennie widget and black market ??) A link to this post should also be added to main oxygen thread.
Great job!
CMN [CyanogenMod_Nand] 1.02
CyanogenMod 6.1 Desire based.
Nand through magldr 1.09 or higher ONLY. DAF is included in the package (win7 version)
Features:
RMNET as default connection mode
Smartass governer as default
0.7 custom ril wrapper from LeTama in case anyone wants PPP instead
Click to expand...
Click to collapse
Kernel:
ocm_r1.
Click to expand...
Click to collapse
What works:
Everything works for me except of course 720p record/decode.
Click to expand...
Click to collapse
Included:
CM 6.2.0RC Nand Rom
DAF (DFT Android Flasher)
Click to expand...
Click to collapse
Instructions:
Boot phone into magldr and go into Flasher menu. Connect it to the PC and wait for it to recognize it.
Run ANDR_INSTALL.exe in extracted folder from .rar, follow the instructions. If you are updating magldr will prompt you if you want to delete or keep userdata. It is SAFE to keep userdata when updating from 1.0 -> 1.01 -> 1.02
For 2.0 you MUST wipe for best performance.
Click to expand...
Click to collapse
FAQ
[Q] My [insert something here] doesnt work!
[A] Search the thread, its most likely has been fixed
[Q] I get robovoice!
[A] delete or rename /system/etc/firmware/default.acdb
[Q] My apps arent showing fullscreen!
[A] Menu-> Spare Parts -> Uncheck Compatability Mode -> Reboot
[Q] Everything is too small, i want it ginormous again!
[A] Edit /system/build.prop the line ro.sf.lcd_density=200 to ro.sf.lcd_density=240 or some larger value (240 = AOSP default)
[Q] I have this weird problem and it works for everyone else but not for me, whats wrong?!
[A] Every problem is harder to diagnose if its just one person with the problem. If its just you then chances are you messed something up.
Click to expand...
Click to collapse
Additional Information:
This will wipe winmo off your phone. To get it back just flash a stock winmo rom. Also, magldr takes the place of the SECOND bootscreen (there are three stages). So you can flash a first stage bootscreen no problem (I have done this), but do NOT flash a second stage one.
Click to expand...
Click to collapse
Credits:
Rajko
Cotulla
LeTama
Cyanogen
etc.
Click to expand...
Click to collapse
Changelog:
v1.0:
Original Release
v1.01:
Added RMNET support and as default net connection.
Update to Hastarin 8.6. LeTama RIL Wrapper .7.
Smartass default governer
v1.01a:
Hotfix, Fixed wifi for 1.01 and 1.02
v1.02:
Removes quadrant advanced and fixes wifi issues.
v2.0:
Custom built CM6.2.0RC optimized for the HD2.
Added LED Notification settings.
Button backlight settings and RMNET/PPP configurations in CM Settings.
Added Wifi MAC address fix in kernel.
new LED driver.
Revert to 240dpi
Click to expand...
Click to collapse
No need for screenshots, its a stock CM rom built for nand. Quadrant advanced score is around ~1540. You wont be getting any better due to IO, which i doubt can be improved much, if at all. Its fast enough as it is.
Download v1.02: http://www.mediafire.com/?pkb4bht9gtk3axu
Download v2.0: http://www.multiupload.com/CL7MVNPUT0
How to fix wifi (1.02 only): http://www.youtube.com/watch?v=LsghZNqyT70 (Credit to TechBurrow)
Custom HD2 CM Settings are in:
CyanogenMod Settings -> User Interface -> LED Notifications
CyanogenMod Settings -> Input Settings -> Button Backlight
CyanogenMod Settings -> Performance Settings -> Data Connection Mode (requires reboot)
-ocm
10char..
Waiting for this for supeer long!!! Great
SuperWOW!!!!
are instructions included within the download? Or do we just flash this ROM like any other WinMO ROM??
you guys are the greatest! happy new year to all..
InitialG said:
are instructions included within the download? Or do we just flash this ROM like any other WinMO ROM??
Click to expand...
Click to collapse
+1 as I'm a little unsure, but I think it's just like flashing as you say. I'll find out in about two mins lol
Reno_79 said:
+1 as I'm a little unsure, but I think it's just like flashing as you say. I'll find out in about two mins lol
Click to expand...
Click to collapse
Actually, I found instructions. lol
There's another thread started by Cotulla and he put instructions how to do it.
Instructions added in first post
sorry for my question.... maybe I'm dumby.... it means we will have just the android operative system installed??? no winmo anymore???
and is it multilanguage and feat every leo device (i.e. european no Tmouse)???
thanx in advantage and congrats 4 your work!
Thanks alot for the ROM . I will begin testing this and cotulla's stock rom .
Happy new year
I'm extremely new to all of this, do I have to put my phone in a special mode or anything, or do I just run the exe file, and my phone will automatically start.
Sorry for the noob question.
wwwooowwww.........what good way to start the new year!
You must be joking !!! unbelievable
that's a great work , and a big step in the androworld. Thanks.
Did that change anything concerning the battery life ?
Will this procedure totally wipe W6.5.5 ?
solid.snake said:
You must be joking !!! unbelievable
that's a great work , and a big step in the androworld. Thanks.
Did that change anything concerning the battery life ?
Will this procedure totally wipe W6.5.5 ?
Click to expand...
Click to collapse
Yes, it will wipe winmo completely. To go back just flash a stock winmo rom.
Thanks for answer. Did you notice something concerning battery consumption ? How many mah ?
Possible to get a mirror ?
will this actually BRICK the phone? confirm works?
Great news on xda again.
Hats off for this Team
Now with possibility of installing android into nand could we have an opportunity to record 720p videos? or it's limited somehow?
another great milestone for xda-developers, you're the best
Shiny ROM: Android 4.4.4, KTU84P for Galaxy Nexus (Maguro)
Skip right to the downloads (if you dare )
Hello there XDA GNex community! I'll admit this is a pretty spontaneous post; I've been building ROMs from the Android Open Source (Project) for awhile now, but I've never "published" any of them. I myself used to own a Verizon Galaxy Nexus, so I've always built from AOSP to make sure I'm as up to date as possible. Well, that's a little background so let's get going with the overview of the ROM itself:
Overview
This ROM is Android KitKat 4.4.4, build KTU84P. The ROM is built directly from source, that is, the Android source code published by Google available for download to all of us developers. The reason I say the ROM is "OTA-like" is because I make VERY few modifications to it, aside from the things that it takes to get the ROM working. I'll go into detail about those things below, but basically I just want the ROM to make your phone feel stable and shiny and new as if it has just received a new OTA update. That being said, it's clear that the landscape of Nexus devices is changing as new ones are released. Therefore, the other primary goal of this ROM is to keep our Galaxy Nexus as close to the modern Nexus design as possible. This means that I will also add in features that will still be stock, but will also make our phones as close to a current Nexus as possible.
As for how I handle the forum side of things, I'm always open to comments, questions, suggestions, requests, etc. I know that most of those things will often be in the form of criticism, but it's okay, I think I can handle it That being said, I do also have a life and am a college student, so I may not get to come on here ALL the time. I will check back as frequently as possible, and I'm hoping that you guys will help each other out as much as possible! Keep it friendly! So now for the details...
Features
Stock Android 4.4.4, build KTU84P
Source (AOSP) built kernel (boot.img)
Easily rootable (see information below)
G-Apps (GMail, Play Store, etc.) included in build along with Nexus apps
Stock browser replaced with Google Chrome
Shiny restart options - access them by holding down the power button and then long pressing on "Power Off"
All the crazy Google proprietary app stuff has been taken care off
Updated frequently
Everything works!
So what do I mean when I say "Everything works!"?
I'm sure by now you all know that when someone says that, it usually ends up not being true. This ROM is not an exception to that rule, but I can say that I've tested most of the things that would be expected to work in stock Android, such as...
WiFi Tethering (no subscription check)
Bluetooth streaming
Google account sign-in and auto-restore of apps and settings
Google Wallet
Location Services (pretty fast GPS lock in my area also)
Photosphere
Android beam
Photo editing with the new filters
Email
Exchange support
Like I said, the normal stuff (data, voice, hardware acceleration, etc.)
More things that aren't important enough to mention here - check out the changelog for a more comprehensive list
Possible Bugs
It's impossible for me to test for and notice EVERY single possible bug in the operating system, so as of right now I can't say that there are any, although I'm sure you will find some. If you do, report them here!
Other IMPORTANT Information
Root
But wait, nothing in this post said anything about root!!!11!!1!1!!! That's right, my ROM does NOT have root built in! (I don't use any root apps, and it's important to the whole "OTA-like" theme). That being said, the ROM is easily rootable; I made sure of this because I know that many, many of you will use root for many useful purposes. If you want to root the ROM, it's as easy as installing Chainfire's new superuser control app/su with this ZIP file. More detailed information can be found in the "Installation Instructions" section. **NOTE** If you are rooted and upgrading to a new build, you should not have to reflash the rooting flashable ZIP because the ROM will keep root for you.
Updates
Now that the ROM has gotten to this stage, the update policy needs a bit of editing Based on the stats I have access to from the website host and data that I collect myself, it seems like Shiny ROM is currently (as of May 27, 2014) stable for at least 80% of the users who have downloaded it. Based on this, and because the ROM is stock, Nexus-like, it doesn't really make sense to update the ROM as frequently as before. The ROM will still be updated as soon as possible after new versions of Android are released. In between Android versions, I will work on making things 100% stable, although that goal isn't always attainable with older devices and aging hardware support. If we decide to explore other paths for the ROM, you will see many more updates If/when the time comes for me to stop updating Shiny ROM, I will let everyone know in a clear way.
Radios
This ROM will (most likely) work with any maguro radios (so long as you have the appropriate ones for your device/area; however, I of course recommend using the most recent radios doe your device. You can find flashable ZIPs of all radio versions in the download post.
Bootloader
Once again, I'm assuming that this ROM will work with all tuna bootloaders; BUT for optimal experience and performance, use the newest Google-approved bootloader, PRIMEMD04. My ZIP installation package for that bootloader can be downloaded here.
ClockworkMod Recovery
I personally recommend using ClockworkMod Recovery as it has always worked well for me with no quirks. Android 4.2 messed up a few aspects of recoveries because of its multi-user system. ClockworkMod Recovery has been updated to correct some of these issues, and I recommend updating to the most recent version, 6.0.4.7. You can flash either the touch recovery or non-touch recovery image through fastboot OR you can download my flashable recovery update ZIP (touch/non-touch) and flash it in recovery. Check out the installation instructions for more details on this.
Some Other Not-so-important Information
Naming Conventions
All of my ROM ZIP files are automatically generated by my build computer. All builds begin with the prefix ShinyROM_maguro_aosp. That prefix is always followed by the date in mmddyy format (e.g. 112212), a hyphen ("-"), and the time in 24-hour, hhmmss format (e.g. 153945). Finally, all builds end with the "signed" suffix - it just helps me know which packages have finished building and which have not. Hopefully this helps everyone to know which update is newest; I stay away from version numbers because I let Google do all of the version control.
Source
In keeping with the spirit of open-source, all relevant Shiny ROM code can be viewed on Github. I'm not extremely experienced with Github, so bear with me as I learn! Thank you!
File Hosting
I've switched over from using Dev-host to a privately hosted site, graciously and generously given to me by user Goofball. Dev-host is still an amazing service, but it's much more convenient for me to use a privately hosted site, plus I get my own suburl and FTP access! HUGE thanks to Goofball! The private hosting will definitely help me deliver a better experience to you guys as far as downloading goes. You can view all of my uploaded, public files here: http://shinyrom.goofball.org/
Also, if anyone ever wants to mirror for me, please feel free so long as you keep the file name and the file itself intact. As for everyone who downloads from a posted mirror: BE CAREFUL! Always use a virus scanner and be careful with what you are putting on your device!
Installation Instructions (VERY IMPORTANT - Note: You can flash all of these ZIPs in CWM or TWRP*)
*Android 4.4 KitKat builds must be installed using the latest version of your preferred recovery!
ROM
1. Download the latest version of the ROM from the download post. (Also download any other files you will need to install, such as Chainfire's SuperSU Root ZIP, radio installation ZIPs, the bootloader installation ZIP, etc.)
2. Put the file(s) you downloaded in step 1 on your phone's internal storage (sdcard).
3. Turn off your phone.
4. Boot into the bootloader of the phone by holding down both volume buttons and the power button simultaneously until you feel a vibration and see a large arrow that says "Start".
5. Use the volume keys to change the arrow until it says "Recovery," then press the power button to boot into recovery.
6. Because of differences in recovery types, I will make the following steps rather generic.
7. Wipe cache.
8. Wipe dalvik cache.
9. If you want to be 100% sure there are no problems, wipe data. If you are coming from another ROM or Android version, wipe data. If you do not wipe data and something goes wrong, repeat this process but wipe data - this step is not necessary if you are simply upgrading.
10. If you are updating your radios, flash the radio ZIP
11. If you are updating your bootloader, flash PRIMEMD04-signed.zip
12. Flash the ROM (ShinyROM_maguro_aosp...signed.zip)
13. If you are rooting, flash Chainfire's SuperSU ZIP file - this step is not necessary if you were rooted on the previous build and are simply upgrading.
14. Reboot your phone, and enjoy!
**Note: If you are simply upgrading to a new version of the ROM and want to keep root, follow the exact instructions above, and do not format /system. It really is not necessary to format /system at any time (unless specifically noted), as the ROM installer has this function built in.
Mods
1. Download the latest version of the mod(s) you wish to install from the download post.
2. Put the file(s) you downloaded in step 1 on your phone's internal storage (sdcard).
3. Turn off your phone.
4. Boot into the bootloader of the phone by holding down both volume buttons and the power button simultaneously until you feel a vibration and see a large arrow that says "Start".
5. Use the volume keys to change the arrow until it says "Recovery," then press the power button to boot into recovery.
6. Because of differences in recovery types, I will make the following steps rather generic.
7. Wipe cache.
8. Wipe dalvik cache.
9. Install the mod(s) you downloaded in step 1.
10. Fix permissions (not really necessary)
11. Reboot and enjoy!
**Note: You can remove all mods you've installed by dirty flashing the latest version of the ROM.
ClockworkMod Recovery (Fastboot method - must have an unlocked bootloader and fastboot in your path)
1. Download either the CWM touch recovery image or non-touch recovery image to your computer and rename it to "recovery.img".
2. Power off your phone.
3. Boot into the bootloader of the phone by holding down both volume buttons and the power button simultaneously until you feel a vibration and see a large arrow that says "Start".
4. Plug your phone into your computer using the standard USB cable.
5. Open the command prompt/terminal and navigate to the folder where your "recovery.img" is saved.
6. Type "fastboot devices" to make sure your phone is recognized; a serial number should show up on the screen.
7. Type "fastboot flash recovery recovery.img" and wait for the process to complete (should be quick).
8. You're done! Use the volume keys to select "Recovery" and boot into your new recovery!
ClockworkMod Recovery (Flashable ZIP method - easier)
If you are updating your recovery before flashing a ROM, these steps should ALL be completed PRIOR to flashing the ROM.
1. Download either the touch recovery flashable ZIP or the non-touch recovery flashable ZIP.
2. Place the ZIP file downloaded in step 1 on your internal storage/sdcard.
3. Turn off your phone.
4. Boot into the bootloader of the phone by holding down both volume buttons and the power button simultaneously until you feel a vibration and see a large arrow that says "Start".
5. Use the volume keys to change the arrow until it says "Recovery," then press the power button to boot into recovery.
6. Choose "Install update from sdcard"
7. Select "Choose file from sdcard"
8. Find the flashable recovery ZIP file you downloaded and install it
9. Back up to the root menu of recovery
10. Select "advanced"
11. Select "reboot recovery"
12. The phone should boot up into your new recovery!
Credits
As with most ROMs, I only did a small part to get everything together. Also, a note that should be made here is that when I am using someone else's file, I ALWAYS host files on the Shiny ROM server to ensure that I don't put any unnecessary stress on their servers. Any file, however, still belongs to and is accredited to its original creator as listed below:
Willyjay - For providing us with lots of amazing and innovative mods for the ROM!
Inmanster - Another great modder who we are fortunate to have here in the thread. He works in collaboration with Willyjay and his mods for many things, but also does some of his own unique mods!
Chainfire - For their SuperSU app and su binary, as well as the convenient ZIP update package, which was previously used and recommended. Check out their website, http://www.chainfire.eu/
Groupers - My new buddy who helped me out with a GPS issue that popped up in 4.2.
Google - Without their amazing staff and willingness to share the source code of their operating system, I wouldn't have been able to build this ROM! Of course, all of the Google apps are theirs, along with the Play Store and system apps. They really are the true owners of all of this.
Samsung - We all may have some mixed feelings about them, but in the end they gave us the amazing, hackable phone that is the Galaxy Nexus.
XDA - By providing such a great Android community, ROMs like this one are able to easily connect with users and get their work out there
Dev-Host - The file-sharing service with virtually no limits on sharing - kudos to them and their hard work. d-h.st
Koush and the ClockworkMod/ROM Manager Team - They make the best recovery that's been around for longest, and their constant updates allow us to keep making ROMs! Also, Koush's recently released open source Superuser control app is the best available and the one linked to in the thread. Thanks Koush! clockworkmod.com
Kevdliu - Huge thanks to this dev and their amazing quick settings mod!
The CyanogenMod Team - For a working implementation of DSPManager on Android which can be ported to any AOSP-based ROM! Without them and Bigwavedave25, the DSP manager mod would not be available! Be sure to thank them and to check out the CyanogenMod website! Also, for their feature-filled version of the stock Messaging app which is available as a mod for my ROM!
bouchigo - a user who has helped to make the CM10 Messaging app available as a mod for my ROM in conjunction with Willyjay for bringing it to my attention.
Schoat333 - A user who helped out Willyjay with the bubble styled MMS mods. The credit for the screenshots to go along with the mods goes to him!
Yarly - The most experienced admin I've ever had the pleasure of talking with, who taught me some new debugging tricks and answered some of my questions.
Razorloves - Another admin who helped me out with a few problems and answered a lot of my questions!
Tiny4579 - A kernel dev who also took the time to talk with me and answer a few of my questions.
Thanks to everyone for their hard work and sharing that work with others!
DISCLAIMER
Come on guys, it's a Galaxy Nexus, to what extent could it really get messed up? Nonetheless, in case someone flashes this then puts their phone in the microwave or something and tries to blame it on me, I am not directly responsible for anything that occurs, either negative or positive, from flashing this ROM to your phone. Despite that, I am posting in the spirit of the Android community, a community that I have embraced and belonged to for several years, and I would never try to hurt any of your innocent, beautiful phones. Also, none of the original source for Android belongs to me, nor do any of Google's apps. All preinstalled applications are property of Google, Inc. and I make no claim of ownership to them.
Okay that's about it! THE ROM DOWNLOAD LINK AND A SUMMARY OF ALL FILE DOWNLOADS CAN BE FOUND BELOW!
ROM Download & Changelog
ShinyROM_maguro_aosp_080914-130930-signed.zip
MD5: c13636212d98b7272a6c8155ce61ac0a
Fixes/Changes Included So Far
(older changes)
6/21/14 CHANGES
Updated to Android 4.4.4, KTU84P
8/9/14 CHANGES
Added system-side support for native screen casting
Added Italian translations for the Shiny restart menu (courtesy of XDA user lparcshinoda)
Mods
Before installing any of the packages below, please be sure to check out the mod installation instructions in the OP!
Key
To make mod installation more convenient, all mod links will now be color-coded based on the files they change. The key shows what each color corresponds with:
Red - SystemUI.apk
Blue - framework-res.apk
Purple - SystemUI.apk & framework-res.apk
Green - Other
If you install mods that are in the same color group, it is likely that they will overwrite each other. It is OK to overwrite a previously installed mod, but please note that the originally installed mod will no longer be there. If you want to completely revert to stock, flash the "Back to Stock ZIP" mod under the baldwinguy77 mod section. This mod replaces your SystemUI.apk and framework-res.apk files with ones from the stock ROM.
Developer-specific Mods
All of these mods have been provided by some really awesome mod developers who take the time to continue to make updated mods for my newest ROM builds. That being said, they have lives and can't always get the mods out right away, so make sure the date next to their name matches the build you're running! They usually are around the thread and are open to doing custom mods if you ask Be sure to thank them and check out the credits section for more info!
Baldwinguy77 (Updated for 8/9/14 build)
Back to Stock ZIP - Returns you to the stock version of the ROM by removing SystemUI and framework-res mods.
Stock kernel flashable ZIP - Overwrites any custom kernel you have installed with the stock kernel normally packaged with the ROM.
Inmanster (Updated for 3/9/14 build)
36 DPI Nav. Bar - Replaces the stock navigation bar with a smaller (height-wise), 36 DPI version.
Black Dash-style Softkeys - Replaces the stock navigation bar buttons with black, dash-style ones.
Blue Stock Softkeys - Replaces the stock navigation bar buttons with blue-colored ones.
Carrier Text Replacement - Replaces the carrier text on the lockscreen and pulldown notification shade with "Galaxy Nexus".
Extended Battery Framework Mods - Improve accuracy of battery level reporting for those using extended batteries.
2100 mAh (with Carrier Text Replacement mod)
3050 mAh
3800 mAh
5900 mAh (with No CRT-off Animation mod)
Grey Battery Percentage - Enables display of the current battery percentage in the status bar with grey-colored font.
InmanMod - A combination of the 2100 mAh battery, no CRT-off animation, carrier text, 36 DPI nav. bar, and white zenyth softkeys mods.
No CRT-off Animation - Removes the stock, default CRT-like screen off animation.
White Zenyth-style Softkeys - Replaces the stock navigation bar buttons with white, zenyth-style ones.
Universal Mods & Downloads
These mods have been compiled by myself, sometimes in conjunction with the modders above, to always work with any version of the ROM (but not necessarily any device). Therefore, you don't have to worry so much about these being up-to-date because they should always work. If that is ever not the case, simply PM me and we'll get it fixed This section also includes some other Verizon Galaxy Nexus related downloads such as the latest radios and bootloader. You can use these according to the installation instructions in the OP.
Universal Mods
AOSP Web Browser (for Android 4.4) - Installs the AOSP web browser with Chrome bookmark syncing for Android 4.4.
DSP Manager (for Android 4.4) - Installs the DSP Manager app along with the audio libs and configs important to running the service, allowing you to customize the audio equalizer of your device. At the moment, certain apps on Android 4.4 do not work with the modular DSP service.
ClockworkMod Images
Touch 6.0.4.7
Non-touch 6.0.4.7
ClockworkMod Recovery Flashable ZIPs
Touch 6.0.4.7
Non-touch 6.0.4.7
Chainfire's SuperSU Root Control App and ROOT Flashable ZIP (Works with 4.3 & 4.4)
Download (Latest version, v2.02)
Maguro Radios
Australia + Oceana - GT-i9250T
DVKK6
DVLE1
DVLF1
DVLH1
International (Europe) - GT-i9250
XXKK1
XXKK6
XXKL1
XXLA2
XXLF1
XXLH1
XXLJ1
International (South America) - GT-i9250
UIKL3
UILE1
UILH1
Japan + Pacific Asia - SC-04D
OMKKD
OMLA1
OMLE3
North America - GT-i9250M
UGKK7
UGKL1
UGLA4
UGLC1
UGLH1
UGLL1
South Korea + East Asia - M420
KRKK7
KRKL1
KRLB1
Tuna Bootloaders
PRIMEMD04 Bootloader Flashable ZIP (Latest)
PRIMELC03 Bootloader Flashable ZIP
Also just want to make it clear that to anyone who tested the 2/8 maguro build for me, the 2/9 one is the same!
The real deal.
Thanks.
Sent from my Galaxy Nexus using Tapatalk
No GApps "Add-on" Zip
Some people don't like the way ShinyROM includes its own GApps. Flash this zip directly after the ROM and it will strip out most of the included GApps so that you may use the preferred GApps of your choosing. This will leave the core GApps (Store, Services, etc.) as well as any others required for basic functionality (Keyboard, Camera, Launcher, Dialer, etc.) since there are none of the AOSP counterparts included.
This is particularly handy for GApps packages that try to measure the free space and may fail to install if it feels there isn't enough room.
Enjoy!
Finally! Boom!
Sent from my Galaxy Nexus using Tapatalk
osm0sis said:
I'll just copy this from the other thread.
No GApps "Add-on" Zip
Some people don't like the way ShinyROM includes its own GApps. Flash this zip directly after the ROM and it will strip out most of the included GApps so that you may use the preferred GApps of your choosing. This will leave the core GApps (Store, Services, etc.) as well any others required for basic functionality (Keyboard, Camera, Launcher, Dialer, etc.) since there are none of the AOSP counterparts included.
cwm-ShinyROM-No.GApps.Addon.zip:
View attachment 2559059
Click to expand...
Click to collapse
Thanks! I'll add this to the OP when I get a chance
baldwinguy77 said:
Thanks! I'll add this to the OP when I get a chance
Click to expand...
Click to collapse
No worries! I actually love having the GApps included, but a lot of people were fussing about it in Sesme's port thread so I thought I'd help out.
Also if you're interested, on xda here we've got a complete maguro radio thread and CWM thread I maintain:
[REF] [RADIO] [GSM] Galaxy Nexus GT-i9250 Baseband Collection & Discussion
[RECOVERY] [GN] [GSM] ClockworkMod Recovery Official + Nightlies [Flashable Zip]
:good:
Is this rom lagging for anyone? Right after I flash it I can't even pass the Setup Wizard ..
Just awesome man! The port was already the best ROM. Pure stock, and I can tell you, it's blazing fast!
osm0sis said:
No worries! I actually love having the GApps included, but a lot of people were fussing about it in Sesme's port thread so I thought I'd help out.
Also if you're interested, on xda here we've got a complete maguro radio thread and CWM thread I maintain:
[REF] [RADIO] [GSM] Galaxy Nexus GT-i9250 Baseband Collection & Discussion
[RECOVERY] [GN] [GSM] ClockworkMod Recovery Official + Nightlies [Flashable Zip]
:good:
Click to expand...
Click to collapse
Thank you! I actually downloaded all of these the other night and uploaded them to my server I just need to update the OP with a list
baldwinguy77 said:
Thank you! I actually downloaded all of these the other night and uploaded them to my server I just need to update the OP with a list
Click to expand...
Click to collapse
Haha cheers! I'll add you as a mirror.
BIG work!!!
Inviato dal mio Nexus 5
Great work man！
Official build both on toro and maguro now,could you make one for toroplus？
We need your awesome rom！
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Awesome! Exactly what we need.
Giving this ROM a go.
Nice to see its official now. But on post #1 there are some reference to rootzwiki as xda and I know its probably a copy+paste thing that's why. Just pointing it out
Sent from my Galaxy Nexus using Tapatalk
JustinXu said:
Great work man！
Official build both on toro and maguro now,could you make one for toroplus？
We need your awesome rom！
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey there! I'd love to push out builds for toroplus as well - I think it's safe to say that's next in the pipeline.
akash3656 said:
Nice to see its official now. But on post #1 there are some reference to rootzwiki as xda and I know its probably a copy+paste thing that's why. Just pointing it out
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Oops! I thought I got all of the necessary edits but I missed the one right at the beginning! *Facepalm* Thank you for pointing that out - it's fixed now
Are those battery Extended Battery Framework zips compatible with maguro? I downloaded them from toro's RootzWiki thread a while ago and they were giving me a bootloop
Also, can I use them with other ROMs?
Inviato dal mio Galaxy Nexus utilizzando Tapatalk
I've read that it's not possibile to flash ROM over a stock 4.3 rom.
Someone can confirm this? Also if I wipe /cache partition and Dalvik cache?
Investigating it seems that zip file contains an update script which only overwrites the entire /system mount point.
So, what are the consequences of updating ROM over a stock 4.3 rom?
osm0sis said:
I'll just copy this from the other thread.
No GApps "Add-on" Zip
Some people don't like the way ShinyROM includes its own GApps. Flash this zip directly after the ROM and it will strip out most of the included GApps so that you may use the preferred GApps of your choosing. This will leave the core GApps (Store, Services, etc.) as well any others required for basic functionality (Keyboard, Camera, Launcher, Dialer, etc.) since there are none of the AOSP counterparts included.
cwm-ShinyROM-No.GApps.Addon.zip:
View attachment 2559059
Click to expand...
Click to collapse
@osm0sis
If I simply add to "gapps list" in your zip the apps I do not want to be flashed, will it work?
Something like that:
Code:
/system/app/BasicDreams.apk
/system/app/BasicDreams.odex
/system/app/Books.apk
/system/app/CalendarGoogle.apk
/system/app/Chrome.apk
/system/app/CloudPrint2.apk
/system/app/Drive.apk
/system/app/EmailGoogle.apk
/system/app/EmailGoogle.odex
/system/app/Exchange2Google.apk
/system/app/Exchange2Google.odex
/system/app/FaceLock.apk
/system/app/GenieWidget.apk
/system/app/Gmail2.apk
/system/app/GoogleEars.apk
/system/app/GoogleEarth.apk
/system/app/GoogleTTS.apk
/system/app/Hangouts.apk
/system/app/HPPrintPlugin.apk
/system/app/Keep.apk
/system/app/LiveWallpapersPicker.apk
/system/app/LiveWallpapersPicker.odex
/system/app/Magazines.apk
/system/app/Maps.apk
/system/app/Music2.apk
/system/app/Nfc.apk
/system/app/Nfc.odex
/system/app/PlayGames.apk
/system/app/PlusOne.apk
/system/app/PrintSpooler.apk
/system/app/PrintSpooler.odex
/system/app/QuickOffice.apk
/system/app/Street.apk
/system/app/SunBeam.apk
/system/app/Videos.apk
/system/app/YouTube.apk
/system/priv-app/GoogleFeedback.apk
/system/priv-app/GooglePartnerSetup.apk
/system/priv-app/MusicFX.apk
/system/priv-app/MusicFX.odex
/system/priv-app/TagGoogle.apk
/system/priv-app/TagGoogle.odex
/system/priv-app/talkback.apk
/system/priv-app/Velvet.apk
/system/priv-app/Wallet.apk
Hi, latest Sony 14.4.A.0.108 rom for you!
Features is inside screenshoots. Rom is rooted, have superuser, su, busybox...etc, just simple install propertly and enjoy rom! Bye!
Download old stable rom (update 5 is required after installing this rom!):
- https://mega.co.nz/#!dconlALD!EmOWK0lASSlyuTEkyFQBP8jRGpD3tbKWutD4JdHoJfs
Download new stable rom - final rom (03.jul.2015) (do not install any update with this rom!!!):
- https://mega.co.nz/#!AcxllSZa!dO-qrrgWuXeDrU4p_jmpkawZwz5fI83lWiHfD-KrjWQ MD5: 6a5e5de79ad7120db63fc9eb57974450
This final rom is one which I am runing daily, I have removed some boatwares but not all, removed only some which iritating me. So if you need some apks which is missing, just download from here -> https://github.com/munjeni/D5503_14.4.A.0.108/tree/master/system and add to the zip byself! This rom have some optimisations and fixes, dual recovery, cwm munjeni and twrp, to enter cwm hold volume down when blue light start blinking, or hold volume up for twrp when blu start blinking. I recomend linheart+row and my favorite theme aka black theme munjeni which is included only in final rom aka this one. This rom contain kernel from 157 with kernel modules and firmwares from 157... etc, in short my favorite rom dumped directly from my phone using romgen tool, so its tested and definitely stable, just install it right and carefully and enjoy!
* If you have root problems or problems remounting system rw, install this http://forum.xda-developers.com/showpost.php?p=61696951&postcount=531
* If your choice was "debloat rom" trought aroma installer, I have marked google contact & calendar sync in removal list as bloatware, but if you realy want to debloat your rom but kiping google contact & calendar sync you must install folowing zip package -> http://forum.xda-developers.com/showpost.php?p=61894795&postcount=573
How to install:
- first of all you must have your phone updated oficialy to the bootloader, baseband... etc and it must be from 108 rom (your choice how you can do it, but thats needed!) before you gona install our rom! You no need to be rooted since rom is for booth locked and unlocked bootloader!
- wipe data factory reset
- format system partition
- install rom
- install update.1 -> (this fix portrait retouch and give you China Photo editor) NOT REQUIRED ANYMORE !
- install update.2 -> https://mega.co.nz/#!NI4UkAgD!XPGU4WhDsfRXquzaL1wmQDaees-PrtF8SBpIOZgdn_Y (this revert dialog and toast style to stock one ;; fix for timeshift video) NOT REQUIRED ANYMORE !
- install update.3 -> https://mega.co.nz/#!lAZSUISa!09ca_GvuDHh8r9-5M3aAhc3TiDOePj26n79aa7VkTds (unhiden daydream option in settings menu) NOT REQUIRED ANYMORE
- install update.4 -> https://mega.co.nz/#!4JJFTYjZ!IjQsoCdJhSFBZFs_hyQrEHudBkaCZZfiyhG4-wHm7sc (usb serial support and ftdi sio ; new task killer) NOT REQUIRED ANYMORE
- install update.5 -> https://mega.co.nz/#!1FoUkLZB!SEpBPmiV7GC6D0CeXdej-neqwOsfMelrFTxY5teKFp8 (ntfs support) INSTALL ONLY IF YOU HAVE old stable rom, do not use with final rom!!!
- do not replace default busybox which comming with this rom since you will broke root!
For best experience I have compiled Lionheart cpu governor, you can use them in combination with row iosched to get very smooth ui and very good baterery life for daily usage! I have runing rom 13 hours + 1 hour with phone usage and have almost 88 percent batery power remain
4k is not working and allso I not going to get them working!(I have removed 4k from camera widget). I sugest you to not use any external camera mod since our one is totaly stock based and I have not replaced anything related to stock camera, every camera part is carefully patched, so if you want any camera mod than do not go here to report something which probably will not work after your replace or you get battery drain fast after replace! Allso if you have installed something which not comming from our rom than allso please do not report anything! Everything is tested and everything working very good!
If somebody have problems installing rom (error 7 during installation):
- Remove first 2 lines (ASERT) from updater-script than try again
Hoorraaayy, you are back.
Thanks for the update man, will download and try ASAP,
Also I was looking for an update for multiboot, that would be amazing.
Thanks for your great work, and looking forward to seeing more of you
Probably not since my microphone is broken and probably I must get new model soon (z3 mini)...soon. In any way I am sharing the best rom to all :laugh:
Thanks for sharing this ROM, looks very promising!! Is it based on the brand new Sony firmware 14.4.A.0.108 from August, or on the one that is available since June?
With best regards, maris
Yes, D5503_14.4.A.0.108_latest one from august
Nice to have you back, keep cool
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
John.D.. said:
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
Click to expand...
Click to collapse
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
munjeni said:
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
Click to expand...
Click to collapse
Brilliant!. Is there support init.d ?
I'm still using your older rom, because I didn't want to loose the Led and Privacy Guard functionality. Now I'm finally able to update! :victory:
Thank you very much Munjeni!
what are the differences with the old .108?
John.D.. said:
Brilliant!. Is there support init.d ?
Click to expand...
Click to collapse
Yes, its allready there!
phantomEVO said:
what are the differences with the old .108?
Click to expand...
Click to collapse
You can see notification trought Sony PC Companion software about 108 update, inside notification window you can see changelog about new update (just open SPCC before you install latest rom)!
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
You can try
I followed all steps for installation and every time it fails.
vriz27 said:
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
Click to expand...
Click to collapse
Flashed via twrp and worked flawlessly.
@munjeni
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
any kernel tweaks in this rom?
einfachgaer said:
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
Click to expand...
Click to collapse
Yes, simple open rom zip and replace framework-res.apk with this one https://raw.githubusercontent.com/m...f725b2b6f0/system/framework/framework-res.apk than reflash rom without wiping anything
OyyO said:
any kernel tweaks in this rom?
Click to expand...
Click to collapse
No need since stock rom is performing very fast and I think thats not need
1st OP
Welcome, fellow Nook users, to the future of the Nook Simple Touch! We present to you: 1337 ROM!
This ROM is made for both the Nook Simple Touch and the Nook Simple Touch with GlowLight using software version 1.2.1.
Features
New kernel, with multitouch and USB host capability
NoRefresh
Status bar and other UI tweaks
Book Button Menu (Configure the book button to open it with Nook Touch Mod Manager)
ReLaunch
Cupcake/Donut Launcher
AndroNook Settings
Google Apps
Rotation Control
Preloaded necessity apps (trying not to say bloatware; you can uninstall them!)
More background tweaks
Installation Instructions
Install Clockworkmod Recovery (to internal memory, not the SD Card) according to this thread.
Download the latest version of the ROM from the Downloads section. THESE ARE NOT FLASHABLE FILES.
Extract the package to an accessible location. You should have three *.zip files.
Copy all three *.zip files to the SD Card or internal memory.
Boot to Clockworkmod by rebooting and holding the bottom left and right buttons at the "Your Nook is Starting Up" screen.
Wipe /system (mounts & storage > format /system > Yes)
Flash the nook_1337rom_xx.zip and reboot.
Follow through normal B&N setup, then boot back into recovery.
Flash Nooter-Part1.zip and reboot back into the OS.
You should be brought to ReLaunch instead of the B&N homescreen.
Open YouTube. Hit Menu -> My channel. At the prompt that appears, tap Add Account.
Sign in with your Google credentials (Gmail and password) and close YouTube.
Open Gmail. Tap menu -> Sync. Gmail will promptly crash (straight to home; no FC or "unfortunate" stop)
Reboot back to CWM again. This time, flash Nooter-Part2.zip.
Reboot again and enjoy!
Upgrade Instructions for coming up from previous versions of the ROM
Download the latest *.zip file and extract it somewhere safe. As a reminder: THIS IS NOT A FLASHABLE FILE
Copy the three contained *.zip files to your SD card.
Reboot into recovery.
Wipe /system (mounts & storage > format /system > Yes)
Flash all three files in this order, without rebooting: nook_1337rom_xx.zip, Nooter-Part1.zip, then Nooter-Part2.zip.
Reboot.
Note - Be sure to check out the 2nd OP for the changelog, planned features, FAQ, and more.
XDA:DevDB Information
1337 ROM, ROM for the Barnes & Noble Nook Touch
Contributors
yattaro, ИΘΘK¡€, javelinanddart
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: B&N OS 1.2.1
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.3.4
Beta Release Date: 2015-04-09
Created 2014-11-07
Last Updated 2015-04-11
[NST/NSTG][ROM] 1337 ROM [Nov. 6]
2nd OP
Changelog
• Version 1.0 - Alpha (unreleased)
• Version 1.1 - Testing (unreleased)
• Version 1.2 Beta - initial release (see above for details)
• Version 1.3 Beta - added AndroNook Settings, Cupcake/Donut Launcher; removed Fastmode; updated ReLaunch for fixed root permissions (Apr. 7)
• Version 1.3.1 Beta - added USB host and multitouch (Apr. 8)
• Version 1.3.2 Beta - fixed USB host and multitouch with new kernel (Apr. 8)
• Version 1.3.3 Beta - added NoRefresh (Apr. 8)
• Version 1.3.4 Beta - (current) fixed a couple minor bugs (Apr. 9)
To Do
• ADB support (near future!)
• Multitouch support
• USB host mode support
• init.d support
• Support for 2.3 Gingerbread and beyond
• Upload screenshots
Addons/Modifications
• Coming soon - orientation switch via status bar button
FAQ
Q: "What home launcher does this ROM use?" - @DrNO[PL]
A: It uses the ReLaunch launcher.
Q: "Where are the downloadable files?" - @kwyrt
A: Since this thread is a DevDB project, the downloads are in a separate page, which is accessible through a link in the ribbon above the OP.
Q: "Does this project use Android 2.3?" - @dorfd1
A: No, it doesn't - the only reason the 1st OP says it does is because 2.3.x is the lowest Android version allowed in the DevDB system. This ROM uses Android 2.1.
Q: "Will multiple languages be added to this ROM?" - @DrNO[PL]
A: No, they won't, because, believe it or not, it's already a stock feature - you just need root to access it! Here's how:
1. Install the app Termimal Emulator from the Market.
2. Open it, and enter the command
Code:
su
The line should now have a "#" on the far left.
3. Enter the command
Code:
am start -n com.android.settings/.DevelopmentSettings
...which launches a hidden settings menu.
4. Tap "Locale Picker[English (United States)]".
5. Choose your language, and enjoy!
Q: "Is this ROM rooted?" - @youxiaojie
A: Yes, it is.
Q: "Are you guys working on an updated ROM that uses 2.3?" - @frap129
A: No, because as of now nobody has been able to update the Android version on the Nook Touch device. 2.1 is the version we are developing for. UPDATE - It's looking like Gingerbread and beyond may be possible for the NST, so the new answer to your question is YES.
Can you post some screenshots?
Which homeapp is used? I'm asking as the one in [NST/NSTG][ROM] Tweaked Modded ROM [Feb16] is restarting / falling into refresh loop with some of my books, which is a bit annoying
DrNO[PL] said:
Can you post some screenshots?
Which homeapp is used? I'm asking as the one in [NST/NSTG][ROM] Tweaked Modded ROM [Feb16] is restarting / falling into refresh loop with some of my books, which is a bit annoying
Click to expand...
Click to collapse
It uses ReLaunch. Give me about an hour and I can throw together some screenies.
Edit: they're up now! Sorry for the delay. Check up top.
yattaro said:
Download the latest nook_1337rom_xx.zip, Nooter-Part1.zip, and Nooter-Part2.zip (not to be confused with the ones for pinguy1989's ROM) from the links above..
Click to expand...
Click to collapse
Would love to try this out but I'm not seeing the links for the 1337rom, nooter-part1, and nooter-part2. Am I missing something?
kwyrt said:
Would love to try this out but I'm not seeing the links for the 1337rom, nooter-part1, and nooter-part2. Am I missing something?
Click to expand...
Click to collapse
It's a DevDB project. Look above the OP.
yattaro said:
It's a DevDB project. Look above the OP.
Click to expand...
Click to collapse
Gotcha. Had not seen that before. Thanks!
Thanks, I will test it tonight
DrNO[PL] said:
Thanks, I will test it tonight
Click to expand...
Click to collapse
Let us know how/if you like it - and also be sure to report any bugs you find using the DevDB Bug Reports feature, and leave a review using the DevDB Reviews feature!
Is this android 2.3?
Sent from my GT-P3110 using Tapatalk
dorfd1 said:
Is this android 2.3?
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
No, it's not - the DevDB options just don't allow any Android version below 2.3.x. It's really Android 2.1, just like every other Nook thing.
Sorry about that.
thenookieforlife3 said:
Let us know how/if you like it - and also be sure to report any bugs you find using the DevDB Bug Reports feature, and leave a review using the DevDB Reviews feature!
Click to expand...
Click to collapse
Just flashed and already like it from the start. New, nice pre-boot and shutdown screens and boot animation. Home is just what I searched for. Let me test it for a day or two. I'll let you know about ups and downs, pros and cons... Review comes afterwards
1st question, is there a way to make app drawer to just display icons in 4 columns (with labels or not) instead of 2-column short-list?
2nd are you going to include additional languages similar to HERE?
DrNO[PL] said:
Just flashed and already like it from the start. New, nice pre-boot and shutdown screens and boot animation. Home is just what I searched for. Let me test it for a day or two. I'll let you know about ups and downs, pros and cons... Review comes afterwards
1st question, is there a way to make app drawer to just display icons in 4 columns (with labels or not) instead of 2-column short-list?
2nd are you going to include additional languages similar to HERE?
Click to expand...
Click to collapse
Glad you're enjoying the ROM!
Answer to 1st question - I bet there is, but I don't know for sure - try messing around with the ReLaunch settings a bit.
Answer to 2nd question - No, we aren't, because, believe it or not, it's already a stock feature - you just need root to access it! Here's how:
1. Install the app Termimal Emulator from the Market.
2. Open it, and enter the command
Code:
su
The line should now have a "#" on the far left.
3. Enter the command
Code:
am start -n com.android.settings/.DevelopmentSettings
...which launches a hidden settings menu.
4. Tap "Locale Picker[English (United States)]".
5. Choose your language, and enjoy!
1. I'll try searching
2. nope... there's no Polish :/ only mainstream ones that can be chosen also from normal nook Settings
DrNO[PL] said:
Nope... there's no Polish :/ only mainstream ones that can be chosen also from normal nook Settings
Click to expand...
Click to collapse
Hmm. Well, I don't think we're planning on adding that, but I'll talk to @yattaro and see what he says.
thenookieforlife3 said:
Hmm. Well, I don't think we're planning on adding that, but I'll talk to @yattaro and see what he says.
Click to expand...
Click to collapse
Would be nice, but that's not a show stopper.
Rom still did not crash, launcher resterted only once, but it can be my fault. Works smooth and fast. Good job!
Yet I have not opened even one book :silly: lol
In the mean time I've added some, in my opinion, bugs.
I'm going to die now... See you tomorrow
DrNO[PL] said:
Would be nice, but that's not a show stopper.
Rom still did not crash, launcher resterted only once, but it can be my fault. Works smooth and fast. Good job!
Yet I have not opened even one book :silly: lol
In the mean time I've added some, in my opinion, bugs.
I'm going to die now... See you tomorrow
Click to expand...
Click to collapse
I might look into swapping the settings.apk and merging the functionality in framework-res.apk in that mod you posted. You might be able to flash that mod straight over this, but you'll lose a lot of the theming that @thenookieforlife3 originally added, notably the status bar.
does it be rooted , support init.d and app2sd?
yattaro said:
1st OP
Welcome, fellow Nook users, to the future of the Nook Simple Touch! We present to you: 1337 ROM!
Features
OC Kernel with FastMode
Status bar tweaks
Book Button Menu (Configure the book button to open it with Nook Touch Mod Manager)
ReLaunch
Google Apps
Rotation Control
Preloaded necessity apps (trying not to say bloatware; you can uninstall them!)
More background tweaks
Installation Instructions
Install Clockworkmod Recovery (to internal memory, not the SD Card) according to this thread.
Download the latest nook_1337rom_xx.zip, Nooter-Part1.zip, and Nooter-Part2.zip (not to be confused with the ones for pinguy1989's ROM) from the links above.
Copy all three *.zip files to the SD Card or internal memory.
Boot to Clockworkmod by rebooting and holding the bottom left and right buttons at the "Your Nook is Starting Up" screen.
Flash the nook_1337rom_xx.zip and reboot.
Follow through normal B&N setup, then boot back into recovery.
Flash Nooter-Part1.zip and reboot back into the OS.
You should be brought to ReLaunch instead of the B&N homescreen.
Open YouTube. Hit Menu -> My channel. At the prompt that appears, tap Add Account.
Sign in with your Google credentials (Gmail and password) and close YouTube.
Open Gmail. Tap menu -> Sync. Gmail will promptly crash.
Reboot back to CWM again. This time, flash Nooter-Part2.zip.
Reboot again and enjoy!
Note - Don't forget to thank both of the OPs, not just this first one!
XDA:DevDB Information
1337 ROM, ROM for the Barnes & Noble Nook Touch
Contributors
yattaro, thenookieforlife3
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: B&N OS 1.2.1
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.2
Beta Release Date: 2014-11-06
Created 2014-11-07
Last Updated 2014-11-12
Click to expand...
Click to collapse
does it be rooted , support init.d and app2sd?
youxiaojie said:
does it be rooted , support init.d and app2sd?
Click to expand...
Click to collapse
It is rooted.
It does not support init.d yet, but we're working on it.
If App2SD works on any other regular rooted Nook, it works just fine for this ROM, too.
By the way, next time, please don't quote the OP, and save all of us from ESD (Excessive Scrolling Disorder). Also, please edit your post and delete the [quote][/quote] tags and everything in between them.
thenookieforlife3 said:
It is rooted.
It does not support init.d yet, but we're working on it.
If App2SD works on any other regular rooted Nook, it works just fine for this ROM, too.
By the way, next time, please don't quote the OP, and save all of us from ESD (Excessive Scrolling Disorder). Also, please edit your post and delete the (quote][/quote] tags and everything in between them.
Click to expand...
Click to collapse
Are you guys working on compiling an updated ROM? I noticed all the changed files are included in the source other than the device tree, so I may try compiling 2.3, and if that works, higher.