Unlocked SGH-I317M - Rooted - CleanRom 4.0.5
I've been pulling my hair out trying to figure out why I'm not picking up an LTE signal when a friend on a phone tells me to just toggle to LTE in mobile network settings. The only problem is, that doesn't exist on my phone for some reason. All that appears in my mobile network settings is "Mobile data", "Data roaming", "Access Point Names" and "Network operators"...nothing to switch between networks. Why isn't my device displaying this setting?
Did you used to have LTE? Have you added the proper APN settings for your carrier?
Re: No option to toggle between networks?!
Yeah im running the same rom and my LTE works fine. You probably need to flash the K7 modem. There are no settings to switch. Only aosp roms have that option.
Go here to get the modem you need.
http://forum.xda-developers.com/showthread.php?t=1987541
[REF] Your one-stop shop for the Note II (Kernels, Roms, Guides, Modems, Etc.)
Sent from my SAMSUNG-SGH-I317 using xda premium
iahk said:
Did you used to have LTE? Have you added the proper APN settings for your carrier?
Click to expand...
Click to collapse
No i had an iPhone 5 previous to my note 2 so no LTE (carrier didn't have LTE for them until just a couple days ago.) I have added the APN settings correctly. There is an option within the APN settings called "bearer" where i have the option to select LTE but when i set it to that, i get no data at all so I have to set it back to "unspecified"
If your carrier only got LTE a few days ago your sim card/plan might not have LTE enabled. That possible in your case?
You are lucky I saw this! I just fixed my settings to reenable LTE like 5 minutes ago.
Here you go.
1. Goto Settings-> More Settings -> Mobile Networks -> Access Point Names -> Enter these settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: miscom
http://forum.xda-developers.com/showthread.php?t=2016575
^^Best ROM!
UrbanLagoon said:
You are lucky I saw this! I just fixed my settings to reenable LTE like 5 minutes ago.
Here you go.
1. Goto Settings-> More Settings -> Mobile Networks -> Access Point Names -> Enter these settings.
Credits: miscom
http://forum.xda-developers.com/showthread.php?t=2016575
^^Best ROM!
Click to expand...
Click to collapse
Thanks for the tip mate but I don't think this will work as I'm not on AT&T!!
Look up "phone information" app in the market. You can toggle networks within that app
grimmjaw said:
Look up "phone information" app in the market. You can toggle networks within that app
Click to expand...
Click to collapse
Gave this a shot but there was nowhere for me to do this. Very complex app to navigate through!
KR3W said:
Thanks for the tip mate but I don't think this will work as I'm not on AT&T!!
Click to expand...
Click to collapse
Dang! I got all happy because I helped someone!
Then when you said that, I saw the M behind i317. Sorry =(
Yeah maybe you could try to find the carrier settings for your phone? Someone online must have posted them.
UrbanLagoon said:
Dang! I got all happy because I helped someone!
Then when you said that, I saw the M behind i317. Sorry =(
Yeah maybe you could try to find the carrier settings for your phone? Someone online must have posted them.
Click to expand...
Click to collapse
thanks anyways! I'm beginning to think that it's the ROM that's causing this issue so I'm going to try and go back to stock. Can somebody help me with this? I'm brand new to androids so I'm not very confident with everything yet. How do I go back to stock while staying rooted? and will doing this make my device carrier locked again or will it remain unlocked? I have already done a nandroid and titanium backup but I'm not sure what the next step is. If someone could help me out I'd appreciate it
Furioustylez said:
Yeah im running the same rom and my LTE works fine. You probably need to flash the K7 modem. There are no settings to switch. Only aosp roms have that option.
Go here to get the modem you need.
http://forum.xda-developers.com/showthread.php?t=1987541
[REF] Your one-stop shop for the Note II (Kernels, Roms, Guides, Modems, Etc.)
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
so since my phone is from Rogers, would i download the Rogers modem even though I'm not using the phone with that carrier? and how do i flash it, with cwm?
In the"phone information" app, go to "device information" (first option) and from there you change the "set preferred network type" to LTE only or whatever you want. You can force lte, force Edge(gsm), basically any combo you want to do is available from this menu.
grimmjaw said:
In the"phone information" app, go to "device information" (first option) and from there you change the "set preferred network type" to LTE only or whatever you want. You can force lte, force Edge(gsm), basically any combo you want to do is available from this menu.
Click to expand...
Click to collapse
I download the app called "phone info" as the app "phone information" does't seem to exist. There is no first option called device information. As soon as i open the app, i'm on a page when its just a big list of my phones info
It was my ROM that wasn't giving me the option to chose a network mode. I went back to factory and viola it was there. BUT...no WCDMA/LTE option. Only GSM/HSPA. I've been told that there aren't enough towers to support all of the LTE devices, would this be the cause of LTE not showing up in the network mode? I would think that it would still let me chose LTE and just bump me down to HSPA if it couldn't connect. What're your thoughts guys?
Bump!
What CSC are you using? There are some CSC settings that could hide the "LTE" string in network settings, making it go from LTE/GSM/WCDMA, GSM only, WCDMA only to GSM/WCDA, GSM, WCDMA. That was only cosmetic in my case though. (Been a while since I've run the T889V ROM, I expect the I317M's to be similar in that respect.)
Darkshado said:
What CSC are you using? There are some CSC settings that could hide the "LTE" string in network settings, making it go from LTE/GSM/WCDMA, GSM only, WCDMA only to GSM/WCDA, GSM, WCDMA. That was only cosmetic in my case though. (Been a while since I've run the T889V ROM, I expect the I317M's to be similar in that respect.)
Click to expand...
Click to collapse
lol what is a CSC? New to android bare with me!
Related
Not sure if this is the right forum to post this, forgive me if it isn't.
How do you hide the top time and date from my today screen? I would like HTC's clock to be the only one on the screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dude seriously??
Start --> Settings --> Today --> Items (tab)
Untick "Date"
seeing as you had a nice screeny i thought i'd reply in a screenshot too because i'm in a screenshot kinda mood untick the highlighted box
but yet you worked out how to flash a rom and change the background of the today screen but you couldnt work out how to remove the date! lol
That doesnt remove the time. Un-checking the date removes the date
C'mon guys...you all are incorrect.
The way to do this is as follows (sorry I dont have time for screen shots)
1) Goto Settings>>Advanced Config
2) Select 'Appearance' tab
3) Select the appropriate drop down from 'Shoe on title bar' label. I selected 'battery'...
After a soft reset, you will get want you want...
wfg
mohitb272 said:
C'mon guys...you all are incorrect.
The way to do this is as follows (sorry I dont have time for screen shots)
1) Goto Settings>>Advanced Config
2) Select 'Appearance' tab
3) Select the appropriate drop down from 'Shoe on title bar' label. I selected 'battery'...
After a soft reset, you will get want you want...
wfg
Click to expand...
Click to collapse
whew, it was starting to feel like howardforums there with all the misinformation and bad advice.
Guys! Stop bickering!
To remove the time from the very top bar of the Today screen, lookin the WIKI for registry edits (here's the page):
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
and look for a section called "Show Time,Date,both or Battery on top bar at Today screen". This is the same edit that the Advanced Config mohitb272 mentioned, but this is the manual version if you haven't got theprogram installed.
To hide the date in the today plug-in (the one next to the clock under Start in your screenshot), follow GilesThaAlmighty's instructions earlier.
Sorted!
Actaeon
what rom are you using? I have AT&T but mine never says 3G AT&T. I have the 3G sim card. I am referring to the screenshot from the first post how it says 3G AT&T. Is it because you have the PDA plan or something. I have the Media Net unlimited plan whatever that is. It allows me to access the internet and stuff.
shazaani said:
Actaeon
what rom are you using? I have AT&T but mine never says 3G AT&T. I have the 3G sim card. I am referring to the screenshot from the first post how it says 3G AT&T. Is it because you have the PDA plan or something. I have the Media Net unlimited plan whatever that is. It allows me to access the internet and stuff.
Click to expand...
Click to collapse
change this in your registry:
[HKLM\Software\OEM\PhoneSetting]
"LongNamePrefix" to 3G
shazaani said:
Actaeon
what rom are you using? I have AT&T but mine never says 3G AT&T. I have the 3G sim card. I am referring to the screenshot from the first post how it says 3G AT&T. Is it because you have the PDA plan or something. I have the Media Net unlimited plan whatever that is. It allows me to access the internet and stuff.
Click to expand...
Click to collapse
You need to have 3G coverage in your area to display 3G. Check at&t coverage map to see if you can get 3G coverage.
ai6908 said:
You need to have 3G coverage in your area to display 3G. Check at&t coverage map to see if you can get 3G coverage.
Click to expand...
Click to collapse
Pretty sure he's referring to the carrier name in HTC Home. Without the reg change it'll say UMTS AT&T.
mohitb272 said:
C'mon guys...you all are incorrect.
The way to do this is as follows (sorry I dont have time for screen shots)
1) Goto Settings>>Advanced Config
2) Select 'Appearance' tab
3) Select the appropriate drop down from 'Shoe on title bar' label. I selected 'battery'...
After a soft reset, you will get want you want...
wfg
Click to expand...
Click to collapse
Thanks for the replies. Oddly enough I don't have the Advanced Configuration option under settings. I know I turned it on manually but after spending an hour going through all the options in my settings I could not find how I did it.
Dude seriously??
Start --> Settings --> Today --> Items (tab)
Untick "Date"
Click to expand...
Click to collapse
Excuse me while I go bang my head against the wall. I can't believe I didn't notice I had it checked off.
hehe no worries we all make a stupid mistake once in a while
I'm running ARHD 5.1.0 on my international unlocked HTC One X.
I'm having a problem with my phone on AT&T. It is switching between H and 3G pretty often, and only H actually functions for data. This is pretty painful, especially when trying to stream Pandora.
I'm looking for help on how to analyse what is happening.
1. How can I see what band it is trying to use on 3G?
2. Is there a way to force it to always use H or EDGE, never 3G?
3. Is there a way to tune the 3G radio for AT&T USA?
4. Is it possible that now that the kernel source is released, the frequency issues can be fixed with kernel drivers?
According to Omega.net, here are the frequencies in my area:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks!
Quick additional questions:
Is AT&T screwing with my signal? Would it make sense to modify the /system/build.prop to masquerade as a different phone?
Would modifying the /system/build.prop allow me to disable all but UTMS-II and UTMS-V?
ro.ril.imc.band=900,1800,1900,850
ro.ril.imc.uband="UMTS_BAND_I","UMTS_BAND_II","UMTS_BAND_V","UMTS_BAND_VIII"
I'm going to try disabling fast dormancy and see how that goes ala this thread:
http://forum.xda-developers.com/showthread.php?t=1111581
So far this change has had no effect. I still can't run speedtest.net for example, because it drops from H to 3G, then renegatiates to H again.
All I did was change the build.prop and reboot. Any idea if I have to do something more?
What APN are you using? the default one?
Mine changes to 3G, but only when not using data.......I've had this with every phone besides the Galaxy Nexus which stayed on H most of the time.
But I haven't tried streaming music, as I dont haha...I have it all on my phone.
Try using the Phone APN.
Create a new apn and type in phone for "Name" and phone for "APN" leave the rest blank and save, then click it to enable
pewpewbangbang said:
What APN are you using? the default one?
Mine changes to 3G, but only when not using data.......I've had this with every phone besides the Galaxy Nexus which stayed on H most of the time.
But I haven't tried streaming music, as I dont haha...I have it all on my phone.
Try using the Phone APN.
Create a new apn and type in phone for "Name" and phone for "APN" leave the rest blank and save, then click it to enable
Click to expand...
Click to collapse
You are the MAN! The APN was set to wap.cingular. Using phone as the APN I'm finally getting some Speedtest.net results! I'm going to do more tests, but this looks good so far.
TheAndroidSwap said:
You are the MAN! The APN was set to wap.cingular. Using phone as the APN I'm finally getting some Speedtest.net results! I'm going to do more tests, but this looks good so far.
Click to expand...
Click to collapse
I just tried all of that. When I delete apn and set up new one with just "phone" typed in I get no signal at all?
iximages said:
I just tried all of that. When I delete apn and set up new one with just "phone" typed in I get no signal at all?
Click to expand...
Click to collapse
I made a new APN, in the name field I typed "phone" and in the APN field I typed "phone". Then saved, and selected it as the APN I wanted to use.
I did just that but it doesnt give me the option to select it after its saved....
I just received my one x from Singapore today and am not having any data issues. I picked the at&t network when I put the sim in and it just worked.
--Matt
mkosem said:
I just received my one x from Singapore today and am not having any data issues. I picked the at&t network when I put the sim in and it just worked.
--Matt
Click to expand...
Click to collapse
I have data no problem, but I am unable to use speed test to test my signal. I was told this was a apn issue
iximages said:
I have data no problem, but I am unable to use speed test to test my signal. I was told this was a apn issue
Click to expand...
Click to collapse
I spoke too soon. Speed tests were sort of working for me initially, but is working properly now after just blanking out the proxy and port lines on the default apn that it set up.
--Matt
mkosem said:
I spoke too soon. Speed tests were sort of working for me initially, but is working properly now after just blanking out the proxy and port lines on the default apn that it set up.
--Matt
Click to expand...
Click to collapse
I will try this out soon. Thanks mate
Sent from my HTC One X using xda premium
Removing the proxy and port seemed to get the same results as the phone APN.
Thanks for this, it solved my issue for my HOX too.
Hey guys,
I have a Note 3 N900T with T-Mobile...
I can get to the service mode and all, but the UMTS menu isn't there.. Is there a way to enable that "hidden option"
Trying to unlock it.
foulpwns said:
Hey guys,
I have a Note 3 N900T with T-Mobile...
I can get to the service mode and all, but the UMTS menu isn't there.. Is there a way to enable that "hidden option"
Trying to unlock it.
Click to expand...
Click to collapse
The available menus are determined by the modem. On my S4, when I upgraded the phone to 4.3, it required a 4.3-compatible modem, which didn't have the menu you're talking about. So pretty much it's "gone" as far as I know.
Product F(RED) said:
The available menus are determined by the modem. On my S4, when I upgraded the phone to 4.3, it required a 4.3-compatible modem, which didn't have the menu you're talking about. So pretty much it's "gone" as far as I know.
Click to expand...
Click to collapse
Well damn.. i just bought the Note 3 like 3 days ago.. sold my s4 on swappa lol.
It came preloaded with 4.4 Kitkat so..
foulpwns said:
Well damn.. i just bought the Note 3 like 3 days ago.. sold my s4 on swappa lol.
It came preloaded with 4.4 Kitkat so..
Click to expand...
Click to collapse
Oh wait, hold up. I know what you're talking about
Two answers:
The mode preference menu: *#2263#
The information menu: *#197328640#
Both of these also work on the S4 (I know because I still have mine that I'm about to sell). I can't figure out how to get to the old "band/frequency preference" menu though.
I actually saved these in my phone as contacts so I can launch them whenever I want. Hope that's what you were looking for.
Product F(RED) said:
Oh wait, hold up. I know what you're talking about
Two answers:
The mode preference menu: *#2263#
The information menu: *#197328640#
Both of these also work on the S4 (I know because I still have mine that I'm about to sell). I can't figure out how to get to the old "band/frequency preference" menu though.
I actually saved these in my phone as contacts so I can launch them whenever I want. Hope that's what you were looking for.
Click to expand...
Click to collapse
Yeah sadly.. I know about those but the *#197328640# Just brings up debug menu in the servicemode. no umts/lte and etc.. just..
Debug Screen
[1]Basic info
2 NAS info
3 AS info
4 Sim INfo
5 CDMA debug info
6 WB-AMR
That's all i see. Can't go to main menu or anything sadly.
I know what you're talking about, the menu from 4.2.2. They either changed the dialer code or removed it from the modem. What are you trying to do? Force a specific frequency, or do the free unlock method?
Product F(RED) said:
I know what you're talking about, the menu from 4.2.2. They either changed the dialer code or removed it from the modem. What are you trying to do? Force a specific frequency, or do the free unlock method?
Click to expand...
Click to collapse
The free unlock method; lol.
(Btw, thank you for trying to help me!)
foulpwns said:
The free unlock method; lol.
(Btw, thank you for trying to help me!)
Click to expand...
Click to collapse
No problem! Unfortunately, that method won't work since the Note 3 shipped with 4.3 I believe. BUT I can get you close to free:
https://play.google.com/store/apps/details?id=eu.chainfire.regionlockaway
This app (requires root) will remove the region lock and also unlock the phone. Totally worth it IMO.
The free unlock method doesn't work on 4.4.2 ROM.... tried it... N u can't downgrade...
Sent from my GT-N7105 using Tapatalk
cougar11 said:
The free unlock method doesn't work on 4.4.2 ROM.... tried it... N u can't downgrade...
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
Well Damn
Dude, the app I linked to is $2.79. All it requires is root.
Sent from my SM-N900T using Tapatalk
Product F(RED) said:
Dude, the app I linked to is $2.79. All it requires is root.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
why when its right here for free by him.
http://forum.xda-developers.com/showthread.php?t=2470551
XxLostSoulxX said:
why when its right here for free by him.
http://forum.xda-developers.com/showthread.php?t=2470551
Click to expand...
Click to collapse
Thanks for the correction. Listen to this guy^ I forgot that devs post a lot of their apps for free here.
XxLostSoulxX said:
why when its right here for free by him.
http://forum.xda-developers.com/showthread.php?t=2470551
Click to expand...
Click to collapse
I could not get this app to work on 4.4.2...
Yeah, neither of these methods work on 4.4.2... next?
Hi,
I had the same problem but I was able to go to UMTS menu by following this thread
http://forum.xda-developers.com/showthread.php?t=2734094
see if it works for you. However, I was not able to unlock it. Nevertheless, this is one step closer to unlocking this way.
foulpwns said:
Yeah sadly.. I know about those but the *#197328640# Just brings up debug menu in the servicemode. no umts/lte and etc.. just..
Debug Screen
[1]Basic info
2 NAS info
3 AS info
4 Sim INfo
5 CDMA debug info
6 WB-AMR
That's all i see. Can't go to main menu or anything sadly.
Click to expand...
Click to collapse
I have android 5.0. Im trying to do the same thing. I hot the phobe from a friend who had it on Sprints network. I'm trying to unlock it so I can use it on AT&T. THR PHONE IS CAPABLE, BUT I can't find where to change it. Help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have a look what's under that CDMA menu # 5 choice..
Ive had this problem for a long time. through 4.2.2, 4.3, and 4.4 roms (various ROMs, including CM, Beanstalk and Slim). I can only enable LTE by going to more>mobile network>at&t before i can select LTE. it always default on WCDMA and it will revert back to WCDMA after reboot. any one have a fix for this?
Put ro.telephony.default_network=9 in build prop
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
eZdubzitmk4 said:
Put ro.telephony.default_network=9 in build prop
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
Click to expand...
Click to collapse
thanks for the reply, but that line is already in build prop. any other suggestions?
d0hceg said:
thanks for the reply, but that line is already in build prop. any other suggestions?
Click to expand...
Click to collapse
What rom are you on? And what APN
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
eZdubzitmk4 said:
What rom are you on? And what APN
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
Click to expand...
Click to collapse
currently on slim v11. using ATT LTE APN, verified APN are correct. ive been researching this for a while with no success.
Try *#*#4634#*#* then Device Information. You can select the band you want and it seems to work.
rangercaptain said:
Try *#*#4634#*#* then Device Information. You can select the band you want and it seems to work.
Click to expand...
Click to collapse
thats pretty much what i have to do. it defaults on wcdma preferred, but after reboot, i will always have to go to mobile network>search network>select at&t before it will stick on any LTE settings.
d0hceg said:
thats pretty much what i have to do. it defaults on wcdma preferred, but after reboot, i will always have to go to mobile network>search network>select at&t before it will stick on any LTE settings.
Click to expand...
Click to collapse
You want gsm...
Send me screenshot of about phone in settings
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
eZdubzitmk4 said:
You want gsm...
Send me screenshot of about phone in settings
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
Click to expand...
Click to collapse
well i actually select lte/gsm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
d0hceg said:
well i actually select lte/gsm
View attachment 2681257
View attachment 2681258
Click to expand...
Click to collapse
Ok now reboot so u lose lte and go to Status in about phone and screenshot plz
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
eZdubzitmk4 said:
Ok now reboot so u lose lte and go to Status in about phone and screenshot plz
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged
Click to expand...
Click to collapse
heres the screenshots after reboot....
anyone?
d0hceg said:
anyone?
Click to expand...
Click to collapse
Dial *#*#info#*#* and go to phone then turn your LTE back on. Also some KitKat Roms have a toggle that does this that you can put in your notification toggles.
Sent from my SGH-I317 using xda app-developers app
*#*#4636#*#*
Device information...
Scroll down and select...
LTE/GSM auto PRL...
arrow back to home and wait 30-45 seconds...
LTE should fire if your APN is correct...
If not....reboot and test again....
If it fails check modem and APN settings ....repeat....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
gregsarg said:
*#*#4636#*#*
Device information...
Scroll down and select...
LTE/GSM auto PRL...
arrow back to home and wait 30-45 seconds...
LTE should fire if your APN is correct...
If not....reboot and test again....
If it fails check modem and APN settings ....repeat....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It won't stick on LTE/GSM unless I select mobile network first, which is what i have to do after every reboot (which is what i am trying to avoid) modem and APN are correct as well...
d0hceg said:
It won't stick on LTE/GSM unless I select mobile network first, which is what i have to do after every reboot (which is what i am trying to avoid) modem and APN are correct as well...
Click to expand...
Click to collapse
I'm experiencing the same issues. I'm on Straight Talk. My LTE will not stick for long, regardless of all the methods I have tried. My text msgs were delayed sending and receiving. Straight Talk claimed that ATT had been experiencing outages in my area (Los Angeles), but I never called ATT direct to confirm this. WCDMA is the only thing that will stick, although I haven't tried LTE anymore in the last two days....
MindArchr said:
I'm experiencing the same issues. I'm on Straight Talk. My LTE will not stick for long, regardless of all the methods I have tried. My text msgs were delayed sending and receiving. Straight Talk claimed that ATT had been experiencing outages in my area (Los Angeles), but I never called ATT direct to confirm this. WCDMA is the only thing that will stick, although I haven't tried LTE anymore in the last two days....
Click to expand...
Click to collapse
i am in the los angeles area as well, but this is not a recent issue for me...ive always had this issue....i know how to get LTE to work, just quite annoying to do it after every reboot, especially since searching for network provider can take some time...ive seen quite of few people with the same issue, but never a fix for it.
d0hceg said:
i am in the los angeles area as well, but this is not a recent issue for me...ive always had this issue....i know how to get LTE to work, just quite annoying to do it after every reboot, especially since searching for network provider can take some time...ive seen quite of few people with the same issue, but never a fix for it.
Click to expand...
Click to collapse
I'm on metro PCs...can get LTE with a t-mobile sim but otherwise just H+. Do not have the build prop line mentioned earlier in thread but willing to try.
My build prop has no such entry:
ro.telephony.default_network=9
Where do I place this in the build.prop?
mexigga said:
My build prop has no such entry:
ro.telephony.default_network=9
Where do I place this in the build.prop?
Click to expand...
Click to collapse
Anywhere. Just look for other settings like that and enter the line in there
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Hi all,
Just picked up the D855 euro version LG G3 and do not see any LTE options in the data section.
I only see GSM/WCDMA.
I entered the LTE mobile settings for rogers and only see "H", not even 4G...
Is there a menu where I can switch this ?
And will I be able to use LTE in Montreal on Rogers Wireless using the 700 / 2100 / 2600 bands ?
I notice it doesnt have AWS with 1700 /2100
I dont mind if it says 4G as long as I can get LTE speeds...
Any help would be much appreciated
Thanks
I'm seeing the same on mine (Starhub Singapore D855). I think 4G is some countries is considered a value added service. You may need to call it in and have it activated on your SIM. I plan to call them later today after work to confirm.
I got mine to work on Fido. I flashed the HKG firmware through the TOT/DLL method. Then I either choose band 4 or 7(can't remember) in developer settings (3845#*885#)
Flash method: http://forum.xda-developers.com/showthread.php?t=2799647 (Go say thanks to wolfgart!) There should also be a link to a guide to flashing. Also here are some screen shots if they help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope this helps!
Thanks so much
I actually got mine working by installing the app "LTE On Off" from the Google Play Store and selecting LTE/GSM/WCDMA
And entering Rogers LTE APN settings
Am getting 80MBPS download and 20MBPS upload
Works perfectly
Im trying to make mine work on US T-Mobile.
Sent from my LG-D855 using XDA Free mobile app
Go to your dialer and type 3845#*855# go to LTE only, then band selection. Chose band 4. Then in your regular settings enter the APN for T-Mobile, and change network selection GSM/WSPDA/LTE auto. Restart your phone.
Sent from my LG-D855 using XDA Free mobile app
antonkapt said:
Go to your dialer and type 3845#*855# go to LTE only, then band selection. Chose band 4. Then in your regular settings enter the APN for T-Mobile, and change network selection GSM/WSPDA/LTE auto. Restart your phone.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
I did that. I also deleted lte configurations. In System/ apps/. Didn't do the trick. I flashed multiple KDZs and it didn't Work. It just doesnt have the right bands for it to work on Tmobile. So i ordered a G3 cat6.
Sent from my LG-D855 using XDA Free mobile app
antonkapt said:
I got mine to work on Fido. I flashed the HKG firmware through the TOT/DLL method. Then I either choose band 4 or 7(can't remember) in developer settings (3845#*885#)
Flash method: http://forum.xda-developers.com/showthread.php?t=2799647 (Go say thanks to wolfgart!) There should also be a link to a guide to flashing. Also here are some screen shots if they help.
Hope this helps!
Click to expand...
Click to collapse
OMG, can you please tell me how you did that? I've been trying to figure out step by step and I can't do anything! I downloaded Flashtool and when I tried to turn off the phone and put it in download mode, after plugging it in and opening up device manager, I can't see "ports" thus I can't change port to COM41. I've been stuck at literally the second step of this complicated process. I really would hate to see my G3 go to waste. Please help as I'm on the Rogers network.
kchan9 said:
OMG, can you please tell me how you did that? I've been trying to figure out step by step and I can't do anything! I downloaded Flashtool and when I tried to turn off the phone and put it in download mode, after plugging it in and opening up device manager, I can't see "ports" thus I can't change port to COM41. I've been stuck at literally the second step of this complicated process. I really would hate to see my G3 go to waste. Please help as I'm on the Rogers network.
Click to expand...
Click to collapse
Hmmm, try re-downloading and re-patching the flash toolkit, maybe something got screwed up there? Also try another USB port. if no try using another KDZ like Germany. Also go through Wolfgarts thread maybe someone had the same problem there.
I'd be interested in seeing how this is done for Rogers too..
Simple Fix
psxp said:
I'd be interested in seeing how this is done for Rogers too..
Click to expand...
Click to collapse
Very simply download the LTE On/Off app from the Google Play store, it allows you to set your network to include LTE, which the LG G3 855 does not do by default. Once you have set it to LTE/GSM/WCDMA you should be good to rock and roll. It worked great for me!
I needed Intelli3G to force LTE availability at all times else after a reboot (for example) it will drop to GSM/WCDMA only.
mogdanc said:
Very simply download the LTE On/Off app from the Google Play store, it allows you to set your network to include LTE, which the LG G3 855 does not do by default. Once you have set it to LTE/GSM/WCDMA you should be good to rock and roll. It worked great for me!
Click to expand...
Click to collapse
Thanks for the update. I ended up with a D852 and its been good. Haven't missed the FM radio yet. Wireless charging is a nice to have but I can live without it.