Develop Bugs

SD card blank or has unsupported filesystem fix

4 posts about this and i think i found a way to fix this with windows. it did this to me and worked so thought id share so people dont format the sd card and lose all data.
i put the sd card from my sensation 4g into my computers card reader. in windows 7 i went to start > rightclick "computer" and click manage. i then clicked on "Disk Management" to see what type of condition the sd card was in. it said it was a RAW disk. i started to think and then decided to try a chkdsk to see if it fixes it. to do that i just clicked START > RUN (or START > type in RUN and click the run shortcut) and type in CMD in the box then click ok. now in the command prompt type in CHKDSK X: /R then press the enter key (NOTE: X represents the drive letter). wait for it to do its thing and it should fix this problem.
i am not sure if it will fix it for all cases but atleast it worked for me.

I had this problem only after installing Swift Key X.
Uninstalled Swift Key X , Unchecked fast boot in power options
Powered down phone removed battery for 20 seconds put battery back in
turn on was fixed
If happens again i will try ur method in an attempt to confirm though

yea another thing that has happened was i had to restart the phone a few times and it worked but the first post was a common issue and fixed it when other methods didnt work

Comes up with the SD card is RAW so it can't be done or something :/..
Really don't want to lose the data :/

Hey, it works for me.

and for me..

sd card
does not work?
Even if i format it, the disk keeps going to RAW format.

D200P13 said:
yea another thing that has happened was i had to restart the phone a few times and it worked but the first post was a common issue and fixed it when other methods didnt work
Click to expand...
Click to collapse
If you have a rooted phone and your sd is readable by your computer there is no need to format it. Just go to recovery and mount/sdcard.
This problem seems to be a flaw although.
Sent from my HTC Explorer A310e using XDA

I do not know why there is no proper feature which causes this problem
Sent from my HTC Explorer A310e using XDA

I think the problem is caused by root access to the sd card or kernel compatibility.
Sent from my HTC Explorer A310e using XDA

ri123 said:
I think the problem is caused by root access to the sd card or kernel compatibility.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
No its actually caused by recovery. Install stock recovery and the sdcard blank or unsupported filesystem error might not appear.:thumbup::beer:
Sent from my HTC Explorer A310e using XDA

Stock recovery might be the fix, clockworkmod compatibility might be the problem.

ri123 said:
If you have a rooted phone and your sd is readable by your computer there is no need to format it. Just go to recovery and mount/sdcard.
This problem seems to be a flaw although.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
This dint work for me.
Nor did the kernel version did.. I am using siyah kernel and i updated it to the latest for SGS2 but it dint work out for me...
D200P13 said:
4 posts about this and i think i found a way to fix this with windows. it did this to me and worked so thought id share so people dont format the sd card and lose all data.
i put the sd card from my sensation 4g into my computers card reader. in windows 7 i went to start > rightclick "computer" and click manage. i then clicked on "Disk Management" to see what type of condition the sd card was in. it said it was a RAW disk. i started to think and then decided to try a chkdsk to see if it fixes it. to do that i just clicked START > RUN (or START > type in RUN and click the run shortcut) and type in CMD in the box then click ok. now in the command prompt type in CHKDSK X: /R then press the enter key (NOTE: X represents the drive letter). wait for it to do its thing and it should fix this problem.
i am not sure if it will fix it for all cases but atleast it worked for me.
Click to expand...
Click to collapse
Now plannin to do the post #1 method. I think this is the last option for me.
---------- Post added at 12:19 PM ---------- Previous post was at 12:14 PM ----------
ri123 said:
No its actually caused by recovery. Install stock recovery and the sdcard blank or unsupported filesystem error might not appear.:thumbup::beer:
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
can you please provide me SGS2 stock recovery IMG link?
I am using NEAT rom which is said to be the stock samsung ROM then y is this problem?

dspPunk said:
This dint work for me.
Nor did the kernel version did.. I am using siyah kernel and i updated it to the latest for SGS2 but it dint work out for me...
Now plannin to do the post #1 method. I think this is the last option for me.
---------- Post added at 12:19 PM ---------- Previous post was at 12:14 PM ----------
can you please provide me SGS2 stock recovery IMG link?
I am using NEAT rom which is said to be the stock samsung ROM then y is this problem?
Click to expand...
Click to collapse
Do you have a partitioned sdcard? The CHKDSK command should detect this.
---------- Post added at 03:37 PM ---------- Previous post was at 03:32 PM ----------
dspPunk said:
This dint work for me.
Nor did the kernel version did.. I am using siyah kernel and i updated it to the latest for SGS2 but it dint work out for me...
Now plannin to do the post #1 method. I think this is the last option for me.
---------- Post added at 12:19 PM ---------- Previous post was at 12:14 PM ----------
can you please provide me SGS2 stock recovery IMG link?
I am using NEAT rom which is said to be the stock samsung ROM then y is this problem?
Click to expand...
Click to collapse
If you can't mount the sdcard using recovery, such as clockworkmod etc, I don't know whether changing to stock recovery will help.

ri123 said:
Do you have a partitioned sdcard? The CHKDSK command should detect this.
---------- Post added at 03:37 PM ---------- Previous post was at 03:32 PM ----------
If you can't mount the sdcard using recovery, such as clockworkmod etc, I don't know whether changing to stock recovery will help.
Click to expand...
Click to collapse
Then whats the possible solution.. I observed one thing which is i flashed stock rom from sammobile and the sdcard used to work sometimes and sometimes it dint.. So i think its nit the sdcard which is corrupted or dead.. Is it coz of rom?
Sent from my GT-I9100 using xda app-developers app

This problem is not caused by CWM or any modded recovery, I know because this is happening to me on my LG Optimus L9 and I have the stock recovery on my phone. Although it is rooted, but that shouldn't be the cause. It's probably a faulty SD card, I have a 32 gb SDHC and my phone seems to hate it, half the time it tells me the card is blank or unsupported filesystem and wants to format it, the other half of the time it sits for an hour or two just scanning the darn thing. Either it actually is a faulty card, or my phone isn't good at reading large SD cards. So much for 'smart phone'...

D200P13 said:
4 posts about this and i think i found a way to fix this with windows. it did this to me and worked so thought id share so people dont format the sd card and lose all data.
i put the sd card from my sensation 4g into my computers card reader. in windows 7 i went to start > rightclick "computer" and click manage. i then clicked on "Disk Management" to see what type of condition the sd card was in. it said it was a RAW disk. i started to think and then decided to try a chkdsk to see if it fixes it. to do that i just clicked START > RUN (or START > type in RUN and click the run shortcut) and type in CMD in the box then click ok. now in the command prompt type in CHKDSK X: /R then press the enter key (NOTE: X represents the drive letter). wait for it to do its thing and it should fix this problem.
i am not sure if it will fix it for all cases but atleast it worked for me.
Click to expand...
Click to collapse
Just logged in to say Thanks
ur idea worked
i was gonna lose alot of data if i had to format the damn card

sd card formating
if still not working, trying format sdcard using software from sdcard.org
....

godfate said:
This problem is not caused by CWM or any modded recovery, I know because this is happening to me on my LG Optimus L9 and I have the stock recovery on my phone. Although it is rooted, but that shouldn't be the cause. It's probably a faulty SD card, I have a 32 gb SDHC and my phone seems to hate it, half the time it tells me the card is blank or unsupported filesystem and wants to format it, the other half of the time it sits for an hour or two just scanning the darn thing. Either it actually is a faulty card, or my phone isn't good at reading large SD cards. So much for 'smart phone'...
Click to expand...
Click to collapse
Definitely the phone. My computer always manages to read the sd card, so of course, whatever happened to my phone is causing the problem. For me, the problem started immediately when I flashed a Rom after root. I didn't wipe my phone before, is that a fix???
Sent from my HTC Explorer A310e using xda app-developers app

ri123 said:
Definitely the phone. My computer always manages to read the sd card, so of course, whatever happened to my phone is causing the problem. For me, the problem started immediately when I flashed a Rom after root. I didn't wipe my phone before, is that a fix???
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
It likely to be something in the /system directory.

App installation - Problem

Hello,
my HTC One V has a problem with the app installation.
If I want to install apps from Google Play there is an error. It says: "Not enough free memory" or in german "Nicht genügend Speicherplatz verfügbar". But I have over 5GB free space.
Whats the problem?
Please have a look at the screenshots.

See your second screenshot:
Total Space : 0.94GB
Apps : 832MB
Available : 129MB
The available space needed for Play Store to work properly is around 140MB.
Go to Settings - Apps - On Storage - move some files to Storage Card to make more space available for Play Store
Apps installation will go to internal memory, not on sdcard that you still have 5GB free.

Thank you!
But how can I install apps to sdcard?

@ckpv5: but ck some apps are by default directly stored on sdcard. like i installed xda app and it was by default stored on card...why so??
Sent from my One V

mihirengg19 said:
@ckpv5: but ck some apps are by default directly stored on sdcard. like i installed xda app and it was by default stored on card...why so??
Sent from my One V
Click to expand...
Click to collapse
That's depends on how the dev set the App Install Location in it's manifest. If it is set preferExternal; the installation will go to sdcard.
---------- Post added at 12:40 AM ---------- Previous post was at 12:32 AM ----------
DominikHX said:
Thank you!
But how can I install apps to sdcard?
Click to expand...
Click to collapse
Are you asking how to set default location for app installation to sdcard ?
So whenever you install an app it is automatically go to sdcard ?

[HowTo] Use swap to get much more performance !

What is Swap?
Linux divides its physical RAM (random access memory) into chucks of memory called pages. Swapping is the process whereby a page of memory is copied to the preconfigured space on the hard disk, called swap space, to free up that page of memory. The combined sizes of the physical memory and the swap space is the amount of virtual memory available.
Swapping is necessary for two important reasons. First, when the system requires more memory than is physically available, the kernel swaps out less used pages and gives memory to the current application (process) that needs the memory immediately. Second, a significant number of the pages used by an application during its startup phase may only be used for initialization and then never used again. The system can swap out those pages and free the memory for other applications or even for the disk cache.
However, swapping does have a downside. Compared to memory, disks are very slow. Memory speeds can be measured in nanoseconds, while disks are measured in milliseconds, so accessing the disk can be tens of thousands times slower than accessing physical memory. The more swapping that occurs, the slower your system will be. Sometimes excessive swapping or thrashing occurs where a page is swapped out and then very soon swapped in and then swapped out again and so on. In such situations the system is struggling to find free memory and keep applications running at the same time. In this case only adding more RAM will help.
Linux has two forms of swap space: the swap partition and the swap file. The swap partition is an independent section of the hard disk used solely for swapping; no other files can reside there. The swap file is a special file in the filesystem that resides amongst your system and data files.
I want that on my Phone, how to do that?
Okay, here goes the real story. Since Android is Linux, that would be possible.
What is needed:
- Fast (Class 10) Micro-SD Card, if you dont have class 10, class 4 would be great too..
- CWM or Partitioning software
- Root (of course )
- Terminal Emulator app
- Kernel with swap and init.d support (for example our CM7, 9, 10 and 10.1 ROM)
- Root Exploring app (for example Root Browser or Root Explorer)
Steps:
1. Partition your SD Card, Ask Google how to do that. Make new Swap partition, or you want SD-ext too..
2. Open Terminal Emulator, do:
Code:
su
fdisk -l dev/block/mmcblk0
3. You'll see something like this:
Code:
/dev/block/mmcblk0p3 1861 1924 514080 82 Linux swap
4. Do the following code, change with your exact swap partition:
Code:
su
swapon /dev/block/mmcblk0p3
*change 3 with yours
5. Now you can check your swap partition by doing:
Code:
free
Now we create the script to do that automatically at boot
1. Open Root exploring apps, head to /system/etc/init.d
2. Make a new file, named 05swap
3. Edit that file, copy this up:
Code:
#!/system/bin/sh
echo Swap enabled
swapon -a
4. Save it and change the permission to :
V V V
V V V
V V V
*tick all the boxes (rwxrwxrwx)
5. Now head to /system/etc and create new file named fstab
6. Open it and enter this:
Code:
/dev/block/mmcblk0p3 swap swap
*remember, change the 3 with yours
Now we set the swappiness value
*the normal value is 60, but you can change to what number you want (max 100). Higher may help to improve overall performance, while setting it to lower may increase interactivity and overall stability.
1. Do this on Terminal Emulator
Code:
su
echo vm.swappiness=60 >> /system/etc/sysctl.conf
2. Reboot and you're done.
Thanks to:
- Linux.com (for the swap definitions)
- Segnale007 (for the swap how to)

First! :laugh: No just kidding. Great guide! Maybe you should cover the Swapper 2, it does it without any second partition.

X-zone said:
First! :laugh: No just kidding. Great guide! Maybe you should cover the Swapper 2, it does it without any second partition.
Click to expand...
Click to collapse
Swapper2 doesn't working fine on my phone lol

I get a error on your first step
"fdisk: can't open 'dev/block/mmcblk0': No such file or directory"

EvilKing009 said:
I get a error on your first step
"fdisk: can't open 'dev/block/mmcblk0': No such file or directory"
Click to expand...
Click to collapse
u need to partition ur sdcard first

simple and exlcellent
Thank you very much for this. :good:

AngSanley said:
u need to partition ur sdcard first
Click to expand...
Click to collapse
EvilKing009 said:
I get a error on your first step
"fdisk: can't open 'dev/block/mmcblk0': No such file or directory"
Click to expand...
Click to collapse
Is because the command does not use system path, it assumes you're in '/'.
Just use
fdisk -l /dev/block/mmcblk0
Sent from my GT-S5660 using xda app-developers app

AngSanley said:
Now we set the swappiness value
*the normal value is 60, but you can change to what number you want (max 100). Higher may help to improve overall performance, while setting it to lower may increase interactivity and overall stability.
1. Do this on Terminal Emulator
Code:
su
echo vm.swappiness=60 >> /system/etc/sysctl.conf
Click to expand...
Click to collapse
I can't find this file! I am in JellyBean 4.2.2, maybe its different file?
/system/etc/sysctl.conf

blazzer12 said:
I can't find this file! I am in JellyBean 4.2.2, maybe its different file?
/system/etc/sysctl.conf
Click to expand...
Click to collapse
Create it, new file
Btw i say do it in the terminal emulator, its easier
Sent from my GT-S5660 using xda premium

Can Plead
Please provide a zip file
To install the Recovery
Thank

$ su
#
# fdisk -l dev/block/mmcblk0
Disk dev/block/mmcblk0: 7948 MB, 7948206080 bytes
4 heads, 16 sectors/track, 242560 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Device Boot Start End Blocks Id System
dev/block/mmcblk0p1 129 195840 6262784 b Win95 FAT32
Partition 1 does not end on cylinder boundary
dev/block/mmcblk0p2 195841 228608 1048576 83 Linux
Partition 2 does not end on cylinder boundary
dev/block/mmcblk0p3 228609 242464 443392 82 Linux swap
Partition 3 does not end on cylinder boundary
# free
total used free shared buffers
Mem: 285732 277168 8564 0 2584
-/+ buffers: 274584 11148
Swap: 443388 63756 379632
# swapon /dev/block/mmcblk0p3
swapon: /dev/block/mmcblk0p3: Device or resource busy
# free
total used free shared buffers
Mem: 285732 279088 6644 0 2592
-/+ buffers: 276496 9236
Swap: 443388 63240 380148
# swapon /dev/block/mmcblk0p3
swapon: /dev/block/mmcblk0p3: Device or resource busy
#
What is wrong? Is swap partition already on? I'm on M'rage rom.
Sent from my GT-S5660 using xda app-developers app

Excellent work man! :good:
It works perfect, but you should make flashable zip file for this work

i made flashable zip but at the moment dont have phone.. is this ok?View attachment swap.zip

doctor-who said:
i made flashable zip but at the moment dont have phone.. is this ok?View attachment 2880098
Click to expand...
Click to collapse
Anyone that tried this that can confirm if it works?
thanks

i am using Joyos 2. 3. 7. (Android)rom and this is what i get flashing the swam.zip...
E:error in storage/sdcard0/swap.zip
(status 0)
installation aborted
also adding the command su
echo vm.swappiness=60 >> /system/etc/sysctl.conf
cannot create /system/etc/sysctl.conf read-only file system
#
even after adding the files etc/sysctl.conf (with the aromat zip file manager) with read wright permission

i am using
Joyos 2. 3. 7. (Android)rom
Sent from my GT-S5660 using XDA Free mobile app

devrieshh said:
Joyos 2. 3. 7. (Android)
Sent from my GT-S5660 using XDA Free mobile app
Click to expand...
Click to collapse
WIll the flashable zip work with this rom?
p.s. - ANy change you can suggest another way for increasing the internal memory of the Gio?

Not yet,
See the result with flashing It,
E:error in storage/sdcard0/swap.zip
(status 0)
installation aborted
this happend also with the mmb. 7.2 rom
perhaps those roms havent- Kernel with swap and init.d support
things you can do,make an extra ext4 partition so you can put apps on it with special appstomemorycard programms see forum somewere
Sent from my GT-5660 using XDA Free mobile app

devrieshh said:
Not yet,
See the result with flashing It,
E:error in storage/sdcard0/swap.zip
(status 0)
installation aborted
this happend also with the mmb. 7.2 rom
perhaps those roms havent- Kernel with swap and init.d support
things you can do,make an extra ext4 partition so you can put apps on it with special appstomemorycard programms see forum somewere
Sent from my GT-5660 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for the help and will try that solution. found a thread here with some interesting tips, so I'll have a go from there.

do everything manualy and will work... but i didnt felt some better ezxeprience with swap on my devixe with class 10 sd card... just read/write became decreased after few days using swap

make usb mass storage work

trying to make this work the usb mass store app,but no luck

Type "mount > /sdcard/MountInfo.txt" (removing quotes of course) inside a terminal emulator then post the newly created text file found on root of internal sd card and I most likely can make it work.
Sent from my SGH-M919 using Tapatalk 2

elesbb said:
Type "mount > /sdcard/MountInfo.txt" (removing quotes of course) inside a terminal emulator then post the newly created text file found on root of internal sd card and I most likely can make it work.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
IS Their a zip or a easy way,i dont mess with terminal at all

Deezy88 said:
IS Their a zip or a easy way,i dont mess with terminal at all
Click to expand...
Click to collapse
you won't scew anything up doing that. and the only way to get it working is by figuring out what the heck the mount points are and applying them. It only works for external sd card btw. And i would run the commands myself but i don't have the note 3. I kinda want it but it seems too big.
---------- Post added at 04:58 PM ---------- Previous post was at 04:46 PM ----------
I take it you are rooted? I can make an app that will do the command for you just give me some time.

elesbb said:
Type "mount > /sdcard/MountInfo.txt" (removing quotes of course) inside a terminal emulator then post the newly created text file found on root of internal sd card and I most likely can make it work.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Here you go.

darkkterror said:
Here you go.
Click to expand...
Click to collapse
So is this an app or a zip to flash in recovery?
TWEAKED 2.5

BACARDILIMON said:
So is this an app or a zip to flash in recovery?
TWEAKED 2.5
Click to expand...
Click to collapse
No, it's just the mount info that elesbb asked for. I don't have the expertise to take that and turn it into something useful

I moddified my S4 UMS Widget. if it doesn't work, i am going to need more information. Let me know if it works or not.
It requires root of course. And if it doesnt work keep tapping it till you get back to MTP mode and go under USB setting in settings app and set that to MTP mode and you should be back to normal again. Really wish i had this to help you guys with mods and what not. but i'll do my best.

I tried the UMS Widget you posted. When I connect my phone to my computer with UMS mode from the widget the phone shows up as a CD-ROM drive, not a removable storage. If I try to click on the CD-ROM drive it asks me to insert a disc. Seems very strange to me.
Sent from my SM-N900T using XDA Premium 4 mobile app

darkkterror said:
I tried the UMS Widget you posted. When I connect my phone to my computer with UMS mode from the widget the phone shows up as a CD-ROM drive, not a removable storage. If I try to click on the CD-ROM drive it asks me to insert a disc. Seems very strange to me.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't have the device so bear with me.
I need you to uses a root browser to locate this for me
/sys/devices/virtual/android_usb/\
Give me the output of all the contents of android_usb directory.
you can type ls /sys/devices/virtual/android_usb > /sdcard/Stuff_in_android_usb.txt
to output it to a text file on your SD card.

The only thing in /sys/devices/virtual/android_usb is another directory called android0. I've attached the contents of /sys/devices/virtual/android_usb/android0.

darkkterror said:
The only thing in /sys/devices/virtual/android_usb is another directory called android0. I've attached the contents of /sys/devices/virtual/android_usb/android0.
Click to expand...
Click to collapse
Thanks! What's under f_mass_storage directory?
Sent from my SGH-M919 using Tapatalk 2

elesbb said:
Thanks! What's under f_mass_storage directory?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
device
inquiry_string
lun
power
product_string
sua_version_info
subsystem
uevent
vendor_string
Sent from my SM-N900T using XDA Premium 4 mobile app

i got usb 3.0
elesbb said:
you won't scew anything up doing that. and the only way to get it working is by figuring out what the heck the mount points are and applying them. It only works for external sd card btw. And i would run the commands myself but i don't have the note 3. I kinda want it but it seems too big.
---------- Post added at 04:58 PM ---------- Previous post was at 04:46 PM ----------
I take it you are rooted? I can make an app that will do the command for you just give me some time.
Click to expand...
Click to collapse
i got usb 3.0 and is fast to send it to the internal but sending it the ext card with mtp always been slow i dont get that if my rooted SG usb storage app work on the sg4 should work with this with no problems

Deezy88 said:
i got usb 3.0 and is fast to send it to the internal but sending it the ext card with mtp always been slow i dont get that if my rooted SG usb storage app work on the sg4 should work with this with no problems
Click to expand...
Click to collapse
Things are different across devices, try this one, *crosses fingers" it should work..

elesbb said:
Things are different across devices, try this one, *crosses fingers" it should work..
Click to expand...
Click to collapse
thanks but no luck its chage to cd drive I:

elesbb said:
Things are different across devices, try this one, *crosses fingers" it should work..
Click to expand...
Click to collapse
Still shows up as a CD-Drive when I plug in the phone and turn on UMS.

darkkterror said:
Still shows up as a CD-Drive when I plug in the phone and turn on UMS.
Click to expand...
Click to collapse
This really sucks not having the device -.- hold on im gonna have to write a "debug/get some info" app to get me some information.
That will happen tomorrow though. Really busy right now. Thanks for all the debugging and info getting!

elesbb said:
This really sucks not having the device -.- hold on im gonna have to write a "debug/get some info" app to get me some information.
That will happen tomorrow though. Really busy right now. Thanks for all the debugging and info getting!
Click to expand...
Click to collapse
Are you guys getting it to work?

mnlmnv said:
Are you guys getting it to work?
Click to expand...
Click to collapse
Without me having the device it's really hard to debug and figure it out. I kinda need to have a live logcat to look at. I know evil1art has it so maybe him and I can do some teamwork on it.
Sent from my SGH-M919 using Tapatalk

[CM11 Guide] How to Link2SD Extreme Much More Intermal Memory

[Descripition] Screenshoot :
What Do You Needs
Link2sd
Rooted device
Root Explorer or other file manager that have root access
CWM/Minitool Partition
sdext on your sdcard/Partition (ext2 or ext3 or ext4, it's up to you)
Click to expand...
Click to collapse
Steps :
[*]-Partition SD Card With CWM
[*]-Advance
[*]-Partition SD Card
[*]-Select Size SD Ext [ Recommedend 512/1024MB ]
[*]-Reboot
[*]-Instal Link2SD
[*]-Recreate Mount Script SDCard [ sdext on your sdcard/Partition (ext2 or ext3 or ext4 )
[*]-Reboot Later
[*]-Setting Unchecklist , Relink Libs file at Boot , Relink Dex File at Boot
[*]-Instal Location select Internal [ In Setting Link2SD ]
[*]-Reboot
[*]-Open Root Exploler
[*]-Data , Select App , App libs , App Absec , Dalvik Cache [ Other Custroom and StockRoom Just App and Dalvik Cache ]
[*]-Copy to SD EXT
[*]-Select App , App libs , App Absec , Dalvik cache [ Other Custroom and StockRoom Just App and Dalvik Cache ]
[*]-Create Link ,
[*]-Back
[*]-Yes , Merge
[*]-Reboot :laugh:
Click to expand...
Click to collapse
Screen shoot ? Uploaded
Sorry for bad english i'm indonesia :highfive:

Does it brake ota's?
Sent from my GT-S5360 using Tapatalk 2

Link2sd
NamikazeRz said:
[Descripition] Screenshoot :
Screen shoot ? Uploaded
Sorry for bad english i'm indonesia :highfive:
Click to expand...
Click to collapse
Do you have a video tutorial ? Please help.
---------- Post added at 03:42 PM ---------- Previous post was at 03:11 PM ----------
I cannot understand after the 14th step

markjerald said:
Does it brake ota's?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Big YES!

Rody Rockstar said:
Do you have a video tutorial ? Please help.
---------- Post added at 03:42 PM ---------- Previous post was at 03:11 PM ----------
I cannot understand after the 14th step
Click to expand...
Click to collapse
yeah , same here , also unable to link system applications according to link2sd ..

Method works on stock rom

Khizar Ali said:
Method works on stock rom
Click to expand...
Click to collapse
I don't understand this metod :s

nice tips mas, suwun

ariel.buszczak said:
I don't understand this metod :s
Click to expand...
Click to collapse
.download the app link2sd
.make a partition
.recreate mount(don't reboot)
.Go to setting and tick relink option and select the storage as internal.
.Go to more and click relink application and library .
.Now reboot.
>That's it
Go to folder data and find sdext2. open it and you can see the apps you downloaded are present in the partition ......
there is no need to copy/paste any thing in stock rom every thing done automatically ENJOY FREE SPACE
HIT THANKS

Khizar Ali said:
.download the app link2sd
.make a partition
.recreate mount(don't reboot)
.Go to setting and tick relink option and select the storage as internal.
.Go to more and click relink application and library .
.Now reboot.
>That's it
Go to folder data and find sdext2. open it and you can see the apps you downloaded are present in the partition ......
there is no need to copy/paste any thing in stock rom every thing done automatically ENJOY FREE SPACE
HIT THANKS
Click to expand...
Click to collapse
I understood the procedure, but I already have linked to partition applications. The procedure is the same?
THANKS!

Don't Understand :S
I'm CM11, and still work for me, I do not understand you need to do after copying "App, App libs, App Absec, Dalvik cache" to the "sd-ext" folder. It really is very poorly explained!
Thanks in advance

maybe video tutorial will help, i also get failed when try this method :|