Develop Bugs

Can't Flash - USB Dead (Only Charging), No WLAN, no Bluetooth

Hey Guys (and Girls of course),
a friend of mine (really, i don't own a Diamond) has got some serious problems with his diamond.
Following issues:
* USB Data seems to dead, Charging works but even in Bootloader-Mode the PC doesn't even recognize there's something attached to USB
* WLAN and Bluetooth can be enabled but are actually as dead as USB is
As flashing via USB won't work because the Diamond won't be recoginzed we tried to flash it via Internal Storage (DIAMIMG.NBH was downloaded via 3G-Online connection). We tried this with the latest official ROM for the Device (o2 Germany).
The bad thing... it doesn't work, too... the Bootloader seems to be stuck on "Loading..." (at least it stood there for 10hours).
I also tried flashing a different SPL, but that fails, too... as with the full image it's staying forever at "Loading..."
Any Chance to revive the Device somehow??

1. do you have HARSPL still on it ?
- if yes, then do a hard reset with formating your NAND
then get the device back on ! try to connect to usb, if not possible,
download a ROM like AZTOR with radio build in !
Try the DIAMIMG.nbh way from you internal storage !
If not successful try to get QMAT http://revskills.de/ and ask viperbjk to help you, be kind get his software and i think he will help out.
If you are in Hamburg I could possibly help you either !
Greets

thx, we'll try the Hard-Reset Way first.
I'm living in Munich, the owner of the Device is living near Passau, so Hamburg is not "just around the corner"... but thx for offering ur help anyways!

Greets from Germany
Sorry that i write in german but becaus Reichi come from germany,i can tell him anything about his problem in german language!
@ Reichi
Ruf Deinen Kumpel mal an und sag ihm,er soll den Diamond über den internen Speicher flashen.
Alternativ-Methode um Diamondroms zu flashen:
Die NBH muss zwingend Diamimg.nbh heissen,also RUU_signed.nbh umbenennen oder gleich ein neues ROM ziehen,evtl.hier:
http://www.ppc-welt.info/community/forumdisplay.php?f=204
Kopiere die Datei auf den internen Speicher.
Dann folgende Tastenkombinationen drücken:
Volume down und Pfeil-taste (<-) gleichzeitig gedrückt halten.
Resetknopf drücken und loslassen, die beiden anderen aber noch festhalten
bis der Bootscreen kommt. Tasten loslassen. Warten bis die Aufforderung den
Powerknopf zu drücken kommt. Diesen dann drücken (Ein-Aus Schalter oben auf dem Gerät)
und schon flasht es das ROM in ca. 2 Minuten.Wenn der flash fertig ist (successfull)
muss ein Softrest gemacht werden. Eine enorme Zeitersparnis für Vielflasher ;-)
Vielleicht hilft das ja schon.
Gruß
pego2007

Wie oben geschrieben hängt der Bootloader in diesem Fall bei "Loading..." - flashen vom Internen ROM ist also nicht drin... er soll das jetzt mal mit vorherigem hard-reset testen...
english:
As written above flashing from internal Memory doesn't work, too... the bootloader gets stuck saying "Loading..."

Hello everybody, I'm "the friend"
Thanks for the fast response and your help!
I've done the hardreset and also formatted the NAND but no success after connecting the diamond via usb.
Now I'm downloading the AZTOR-ROM but it will take a few hours .... no 3G, only GPRS available here...

Now, i tried to flash the AZTOR from the internal Storage, but the same issue again -> "Loading..." on the bootscreen and nothing happens!

Hast du vorher mal den NAND flash gelöscht ??
Gruß
edit: Did you delete the NAND flash before ?

Hi Neutron83,
beim Hardreset hab ich den Reset incl. Löschung des NAND ausgewählt. Anschließend war der Speicher auch leer. Hab das AZTOR-Image herruntergeladen (nur DIAMIMG.NBH war im Internen Speicher) und versucht zu flashen. Meldung "Entering moviNAND" und im nächsten Screen "Loading..." und dabei bleibt es leider wieder...
Edit:
I've done the hardreset including NAND-Format, afterward the internal storage was empty. I renamed the AZTOR-Image to DIAMIMG.NBH and saved it to the NAND (it was the only file in the internal storage). But while trying to flash the image, the screen says "Loading..." and nothing happens.

Also versuch mal folgendes ... klemm dein diamanten an USB dann Bootloader starten (alles abschreiben und hier posten) (Bootloader erreichste mit Softreset und dann vol up + power knopf gedrückt halten)
Welches os verwendest du (deine PC)? Welche SPL hast du ? hab dir ne PM geschickt ! schreib mir mal da ... dann stört niemanden unser deutsch
Edit:
Try the following, connect your diamond to USB then enter bootloader (write everything down) (Bootloader is reached via Vol up + power button, after softreseting)
Wich OS do you use ?(PC side) Wich SPL you use ? I Wrote u a PM ! there we can write so nobody can be angry about our german

All German only posts require transaltion to english included in the post. If this isn't corrected the thread will be closed.
Please read and follow the forum rules.

Can`t flash
@ reini & friends
I`ve found something about error with flash-devices here:
http://forum.xda-developers.com/showthread.php?t=409425
The author ist a german too. I think you can pm him and answer about your problem,perhaps in german ?
greetz
pego2007

After entering the bootloader, the screen shows this:
DIAM300 MFG 64M
SPL-1.30.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30

Okay i would recommend upgrading the SPL / reflash the SPL to the device !
For that put your device into bootloader mode (what OS u use on your pc when u flash?) then get 1.40OliNex and run RUU !
possibly it can flash if you're already in bootloader mode,
Enter bootloader
Connect USB
Run RUU from Unsigned-Hard-SPL-Diamond-OliNex.zip
... for that i also would try use MTTY to connect to your device if its "talkable in any way"
Please add me in ICQ so we can do in german AND its faster than board stuff !

sounds a little bit daft but do you have active sync installed on your pc and have you tried it on a different computer. also if all else fails run the phone completely dead and leave the battery out for 24hrs (back it up first)

I'm using Windows XP Pro SP3 with Active Sync 4.5
Of course, I've also tried to connect on several other hardware with XP SP2 and Vista Ultimate.

Hello !
It may be an hardware problem... I think you should get it back to your retailer, warranty is for that kind of problems...
Good luck !

schwemma said:
After entering the bootloader, the screen shows this:
DIAM300 MFG 64M
SPL-1.30.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Click to expand...
Click to collapse
HELLO, you have to have a SIGNED ROM. Because you have the Protected version of HARD SPL that will NOT allow you to flash any rom.
Change it to other SPL or try a signed rom first.

USB is a problem of Hardware!
We fixed the HardSPL with 1.40 version,
internal storage flash with the nbh of the hardspl package, now he was able to flash another rom, so he flashed aztor ich didnt solve the problem so radio wasnt the problem. now hes going to reflash stock rom and then flash stock spl and get it back to warrenty !!

same thing here..
Hi guys,
i'm facing the same problem, obviously the car charger must have killed my USB, went through the same procedures like you did, all in vain. Just one Question: Has internal flashing of Stock-SPL been possible for you? cause i think the Olinex HardSPL 1.4 is write protected somehow and was still there after I tried to reflash stock SPL from internal memory...
A short information would be great, thx in advance
Greetz from Karlsruhe!

O² IIs/ O² III/ HTC Blue Angle Sound Bug

I need help with my O² IIs; if I don't use it for a while (one to 20 seconds) the sound always turns off and I can't navigate or use the phone. The sound also cannot be set to a level (loud/quiet), because the adjuster hang down on quiet.
vielleicht versteht jemand hier meine Muttersrpache:
ich habe ein Problem mit meinem O² IIs-PDA: Immer wenn ich einen Augenblick warte (in der Regel nur einige Sekunden), schaltet sich der Ton immer wieder automatisch aus-> Er schaltet sich aber nicht nur aus, sondern blockiert auch die restliche Bedienung des PDAs. Wenn ich den Ton nun wieder aufdrehen möchte, springt der Regler immer wieder nach unten; die Lautestärkeverwaltung flackert, und mann kann in der Regel nicht bestätigen. ich hoffe, Ihr könnt mir helfen...
...ach ja, ich benuntze das Windowsmobile 6.5.5 BETA GER von D-Two

according to the forum rules, users are not allowed to post in any other language than english outside the threads that are in other languages already, like the german rom threads. since this is a question about the german rom, it could have been posted there and will probably be moved there.
grundsaetzlich sind nicht englisch-sprachige posts im forum unerwuenscht. zumal es sich um ein problem mit der deutschen rom handelt, waere es angebracht gewesen, dort zu posten
das kann im grunde nur 3 ursachen haben:
1. recht unwahrscheinlich: dein touch screen ist nicht richtig ausgerichtet, einfach mal nachjustieren ueber die einstellungen
2. sound wird auch vom radio rom geregelt, evtl ist da beim flashen was schief gelaufen, z.b. sim karte oder sd karte im geraet vergessen, und dann kann sich das radio schon mal verabschieden.
3. und am wahrscheinlichsten: der laustaerke regler an der linken seite des geraets hat einen schaden und moechte immer runterregeln, das wuerde dann erklaeren, wieso das geraet nichts anderes mehr akzeptiert, weil ja schon permanent eine taste gedrueckt wird und natuerlich auch, wieso der ton weg ist. einfach mal geraet oeffen und sich die ecke anschauen und ggf reinigen.

Hier ein Video meiner Situation
ich kann hier noch keine Links reinstellen, aber bei Youtube im Kanal von 1021380 findet Ihr das Video: es heißt "Xda lls sound bug"

danke fuer die Lösung - thanks for the solution
Sorry for writing german.
I'm a beginner in flashing or installing wm os; I destroyed my father's PDA by trying an update to Win mobile os 5.4. In the Internet, the original O² OS could`t be found. I tried everything half a year to get it work and realized now, that windows xp ist my best friend using updates/ upgrades. Then I found 6.5.5 - It works
1.) So: Thank you for your solution. I try open and clean it.
2.) The memorycard was outside the PDA
3.) what is a radio rom?

the radio rom:
you might have realized that during the booting process, there are 3 numbers, R, G, D
R shows you the radio version currently installed. D: shows the OS rom, meaning the rom you flashed, WM6.5.5 the file you flashed is named nk.nbf and the radio rom would be named radio_.nbf and the flashing process is exactly the same.
ok, but what does it do?
the radio rom handles all the hardware related things, meaning the OS rom uses drivers and the radio rom to actually handle the device, the GSM, GPRS, Wi-Fi, bluetooth, camera, sound, microphone...

sometimes it works well (no sound problem)...
I've got Radio rom 1.12.00 should I upgrade it to 1.15.00?
need i to flash radio rom like nk.nbf file or is the radio rom included in d-twos wm 6.5.5 rom?

radio roms are generally not included in the roms here. but after downloading a radio, the process of flashing is the same, remove the sim and sd card, put the device into bootloader mode, flash using maupgradeut_noid, after flashing, perform a hard reset, pressing power+reset and camera+record and in the menu set No Yes Yes.
and yes, you might want to upgrade the radio, the 1.15.00 is the newest version and seems to work great for most people including myself.

i flashed my PDA and the Radio rom, but I cannot get out of the bootoptions mode. The OS only starts if i take a soft reset

sorry, i did't read your tutorial, but the mail button doesn't work

on a device with broken mail button, you have to connect to the device using mtty (in the wiki). for that connection you have to put the device into bootloader mode, connect the device, start mtty, set it to usb or wceusb, whichever is provided, 115200, 8,1,no,none,none, hit ok and then it connects. press enter and it should show a prompt
USB>
type (not copy & paste), type:
task 28
task 0
then your device should hard reset and then restart, if it doesn't, just soft reset.
i just wanted to verify the 2 lines, but unfortunately, the wiki seems down atm. you should wait till tomorrow then.

thanks for your help - hope it works...

my father was so happy as I showed him his device; he doesn't care about the sound.
thank you very much for help.
GerToe

HTC Desire....what a joke!

Right,here we go....this is what I had installed on my previously working mobile, I debranded it from Orange,and this exe caused me to have to pay for an unlock code:-
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
I today made the mistake of updating OTA to the Froyo OS
Now my phone is useless
It reboots every 2 minutes,theres no signal/network,no wifi,no nothing,it is FUBAR!
I've tried EVERY fix ie downgrade of HBOOT etc etc
However, my phone has remained on HBOOT 0.80 and nothing more,the rest of my phone details are as follows:
Android version 2.2
Baseband version 32.36.00.28u_4.06.00.02_2
Kernel version 2.6.29-0cb9f166 ([email protected] #1
Build number 2.09.405.8 cl218634
Software number 2.09.405.8
What the hell is wrong with it? I have no insurance so I really need help!
Oh, my SD Card doesn't show up neither otherwise I'd have created a new gold card!!!!
Please help

Debranded,,,, OTA,,,,, Mistake,,,,,,
Best bet is to grab a Goldcard of some desire or just a normal card and try rerooting from scratch, wiping everything on the phone and then starting again,
if you can get into recovery and use recovery-windows.bat you should be able to wipe it quite nicely

kurtish said:
Android version 2.2
Baseband version 32.36.00.28u_4.06.00.02_2
Click to expand...
Click to collapse
you can try a newer baseband
http://forum.xda-developers.com/showthread.php?t=687464
I think, I have read somewhere that Froyo requires a 5.xx.xx.xx baseband... Anyway it's worth a try!

kurtish said:
What the hell is wrong with it?
Click to expand...
Click to collapse
Nothing.... remember you have done things your phone is not setup to deal with. You bought a branded phone and therefore it is expecting branded updates etc. This is like buying a car, fitting a turbo-charger then complaining to the manufacturer when it stops working...
Anyway rather than rewriting this, try this
http://www.avforums.com/forums/htc-...s/1298529-desire-froyo-use-your-goldcard.html

Basically,FroYo requires a 2.6.32 kernel and a 5.xxx radio.I believe that once you get those it'll work.But still,strangely enough,they should all have been updated with the OTA...Well,I do believe there is something wrong!Most probably it's what jameson_uk said.

It was my fault......my Goldcard was buggered.....have managed to flash it back to life, just need to update the radio now.....can radios be installed via RUU as the 'update.zip' thing won't work.....HTC please accept my apology,I'm a ****

A goldcard during the OTA would have solved the problem. Heres a how-to-fix-it from a swiss forum. Its german but google translate should solve that:
1.
Sucht und ladet euch das Tool: GoldCardTool-0.0.5
2.
Sichert eure persönlichen Dateien von der Speicherkarte (Kartenleser am Laptop oder Rechner) und formatiert die Speicherkarte im Rechner (Fat32)
3.
Karte ins Handy und starten. Dann das Handy an den Rechner anschließen und warten bis die tolle "System Prozess reagiert nicht" Meldung kommt. Klickt auf Warten.
4.
Nun erscheint die Abfrage, für welchen Zweck die Karte sein soll. Klickt auf "HTC Sync" und führt möglichst schnell danach das o.g. Tool aus. Klickt dazu auf "GetCID".
5.
Nicht verzagen, wenn die CID nicht gleich beim ersten mal gelesen werden kann. Bei mir hat es auch mehrere Versuche gekostet. Falls es nicht beim ersten Mal klappt, versucht es weiter bis es geht. (Punkt 3 und 4 wiederholt ausführen)
6.
Wenn ihr die CID habt, klickt auf den Link darunter und lasst euch das Goldcard image via E-Mail zuschicken.
7.
Nun packt ihr die Karte wieder in den Rechner (Tool nicht vorher schließen !!!). Der Rechner erkennt die Karte und fügt sie in das Dropdown Menu ein (ansonsten "Refresh" klicken).
8.
Klickt auf "Load GoldCard Image" und sucht die Datei, die ihr per Mail bekommen habt.
9.
Klickt nun auf "Patch MMC" und ihr habt die ersehnte GoldCard
So, danach gehts wie folgt weiter:
10. Update (wenn nicht mehr vorhanden) von folgendem Link downloaden und als update.zip auf SD-Karte kopieren:
http://liveimage.htc.com/OTA_Bravo_F...crut4wrv30.zip
11. Karte wieder ins Gerät
12. Handy starten mit Druck auf Volume down und Power gleichzeitig, dann:
- "Recovery" auswählen und warten bis der Bildschirm mit dem roten Dreieck kommt
- "Volume up" und Power gleichzeitig drücken
- "Install update from update.zip" wählen
Dauert ein wenig, danach kommt die Meldung das man Reboot wählen soll. Also mit Power den Punkt Reboot bestätigen.
Handy startet einige Male neu, ohne wirklich Reaktion zu zeigen (auch auftretende Install-Balken ändern sich nicht wirklich), also bitte mal mind. 10 min zeit nehmen.
Greets

kurtish said:
It was my fault......my Goldcard was buggered.....have managed to flash it back to life, just need to update the radio now.....can radios be installed via RUU as the 'update.zip' thing won't work.....HTC please accept my apology,I'm a ****
Click to expand...
Click to collapse
I think you are being a little harsh on yourself there but it did put a smile on my face.

Lol
-10 chars

Reading this post really made my day

[Q] s-on after aahk kit only access bootloader, what to do?

Mod Edit: This is an English only forum. Please use a translation service to first post in English. A copy of your post in your native language is allowed in case a multi-lingual member can offer help.
******
Hello
I got my desire hd versuht to rooten with aahk Kit (strictly according to instructions). Unfortunately, the bootloader still s-on.
I have tried:
put on htcdev.com the bootloader unlocked on => works
aahk the kit again execute => does not work, he does not find a device, or if you will be performing the hack Nonoperating certainly found the HAndy, the hack does not go through, but
What can I do now?
******
Hallo
Ich habe versuht mein desire hd mit dem aahk Kit zu rooten (streng nach Anleitung!) . Leider steht im bootloader immer noch s-on.
Versucht habe ich:
über htcdev.com den bootloader auf unlocked setzen => funktioniert
das aahk Kit nocheinmal auszuführen => funktioniert nicht, er findet kein device, oder wenn man den Hack im ausgeschalteten Zustand durchführt wird zwar das HAndy gefunden, der Hack läuft aber nicht durch
Was kann ich jetzt tun???

English please !

Only English is allowed on these forums

If you have a desire hd, switch of the antivirus, download the aahk again, reinstall the drivers as well, try again.
If you have the inspire 4g, use the hack kit as well, but the process is different if you have the latest software.
Relock the bootloader if you havent done that yet with htcdev.
Sent from a dream.

== >> Got it If anyone else has a similar problem: http://forum.xda-developers.com/show...&postcount=396

Steph.xda said:
Mod Edit: This is an English only forum. Please use a translation service to first post in English. A copy of your post in your native language is allowed in case a multi-lingual member can offer help.
******
Hello
I got my desire hd versuht to rooten with aahk Kit (strictly according to instructions). Unfortunately, the bootloader still s-on.
I have tried:
put on htcdev.com the bootloader unlocked on => works
aahk the kit again execute => does not work, he does not find a device, or if you will be performing the hack Nonoperating certainly found the HAndy, the hack does not go through, but
What can I do now?
******
Hallo
Ich habe versuht mein desire hd mit dem aahk Kit zu rooten (streng nach Anleitung!) . Leider steht im bootloader immer noch s-on.
Versucht habe ich:
über htcdev.com den bootloader auf unlocked setzen => funktioniert
das aahk Kit nocheinmal auszuführen => funktioniert nicht, er findet kein device, oder wenn man den Hack im ausgeschalteten Zustand durchführt wird zwar das HAndy gefunden, der Hack läuft aber nicht durch
Was kann ich jetzt tun???
Click to expand...
Click to collapse
I need to see the Hack Kit session, with the information provided there are too many variables involved to determine for certain what might have failed.

[Q] Htc One X wont start

Mein Htc One X ging aus und startete automatisch. Jedoch nur bis zu " htc quietly brilliant" und danach geht es wieder aus. Und das wiederholt sich ständig. Wenn ich VOL down + Powertaste drücke komme in den bootloader, aber ich kann dort nichts machen, weil mein Handy sich selbstständig macht, den Hboot aussucht und sofort wieder aus geht. Da das Handy ständig an und aus geht ist der Akku leer. Und wenn ich dann in den bootloader will steht da " failed to open usb master mode"
English (google translate):
My HXO went out and started automatically. However, only up to "htc quietly brilliant" and then it goes off again. And this is repeated continuously. When I press VOL down + Power button to get into the bootloader, but I can not do anything there, because my phone starts his own business, the HBOOT chooses and immediately goes out. Since the phone constantly and goes from the battery is empty. And if I is in the bootloader wants because "failed to open usb master mode"
Rom: One X 4.20 SD Ultimate Final Editon OR Android Revolution HD-One X 31.3 (i'm not sure)
Please Help

geefommit said:
Mein Htc One X ging aus und startete automatisch. Jedoch nur bis zu " htc quietly brilliant" und danach geht es wieder aus. Und das wiederholt sich ständig. Wenn ich VOL down + Powertaste drücke komme in den bootloader, aber ich kann dort nichts machen, weil mein Handy sich selbstständig macht, den Hboot aussucht und sofort wieder aus geht. Da das Handy ständig an und aus geht ist der Akku leer. Und wenn ich dann in den bootloader will steht da " failed to open usb master mode"
English (google translate):
My HXO went out and started automatically. However, only up to "htc quietly brilliant" and then it goes off again. And this is repeated continuously. When I press VOL down + Power button to get into the bootloader, but I can not do anything there, because my phone starts his own business, the HBOOT chooses and immediately goes out. Since the phone constantly and goes from the battery is empty. And if I is in the bootloader wants because "failed to open usb master mode"
Rom: One X 4.20 SD Ultimate Final Editon OR Android Revolution HD-One X 31.3 (i'm not sure)
Please Help
Click to expand...
Click to collapse
Firs start the phone in bootloader with volume down and power button and after this connect to the computer.
Not like you connect to the computer and after this go in bootloader

Thant said:
Firs start the phone in bootloader with volume down and power button and after this connect to the computer.
Not like you connect to the computer and after this go in bootloader
Click to expand...
Click to collapse
i cant. the akku dont charge because it going on and off all the time. and if i'm in the bootloader my HOX goes in sec off..
sorry for my english

geefommit said:
i cant. the akku dont charge because it going on and off all the time. and if i'm in the bootloader my HOX goes in sec off..
sorry for my english
Click to expand...
Click to collapse
OK take from some battery case and connect put on your hox then you will have free USB port and charging battery in the same time