Mein Htc One X ging aus und startete automatisch. Jedoch nur bis zu " htc quietly brilliant" und danach geht es wieder aus. Und das wiederholt sich ständig. Wenn ich VOL down + Powertaste drücke komme in den bootloader, aber ich kann dort nichts machen, weil mein Handy sich selbstständig macht, den Hboot aussucht und sofort wieder aus geht. Da das Handy ständig an und aus geht ist der Akku leer. Und wenn ich dann in den bootloader will steht da " failed to open usb master mode"
English (google translate):
My HXO went out and started automatically. However, only up to "htc quietly brilliant" and then it goes off again. And this is repeated continuously. When I press VOL down + Power button to get into the bootloader, but I can not do anything there, because my phone starts his own business, the HBOOT chooses and immediately goes out. Since the phone constantly and goes from the battery is empty. And if I is in the bootloader wants because "failed to open usb master mode"
Rom: One X 4.20 SD Ultimate Final Editon OR Android Revolution HD-One X 31.3 (i'm not sure)
Please Help
geefommit said:
Mein Htc One X ging aus und startete automatisch. Jedoch nur bis zu " htc quietly brilliant" und danach geht es wieder aus. Und das wiederholt sich ständig. Wenn ich VOL down + Powertaste drücke komme in den bootloader, aber ich kann dort nichts machen, weil mein Handy sich selbstständig macht, den Hboot aussucht und sofort wieder aus geht. Da das Handy ständig an und aus geht ist der Akku leer. Und wenn ich dann in den bootloader will steht da " failed to open usb master mode"
English (google translate):
My HXO went out and started automatically. However, only up to "htc quietly brilliant" and then it goes off again. And this is repeated continuously. When I press VOL down + Power button to get into the bootloader, but I can not do anything there, because my phone starts his own business, the HBOOT chooses and immediately goes out. Since the phone constantly and goes from the battery is empty. And if I is in the bootloader wants because "failed to open usb master mode"
Rom: One X 4.20 SD Ultimate Final Editon OR Android Revolution HD-One X 31.3 (i'm not sure)
Please Help
Click to expand...
Click to collapse
Firs start the phone in bootloader with volume down and power button and after this connect to the computer.
Not like you connect to the computer and after this go in bootloader
Thant said:
Firs start the phone in bootloader with volume down and power button and after this connect to the computer.
Not like you connect to the computer and after this go in bootloader
Click to expand...
Click to collapse
i cant. the akku dont charge because it going on and off all the time. and if i'm in the bootloader my HOX goes in sec off..
sorry for my english
geefommit said:
i cant. the akku dont charge because it going on and off all the time. and if i'm in the bootloader my HOX goes in sec off..
sorry for my english
Click to expand...
Click to collapse
OK take from some battery case and connect put on your hox then you will have free USB port and charging battery in the same time
Related
Hello,
I've a problem with my new Touch Pro 2. I tried to connect the phone with a smartdeviceproject, but that doesn't work. The errormessage is:
Code:
Fehler 1 Die Konfiguration für die Gerätesicherheit verhindert das Herstellen einer Verbindung. Stellen Sie sicher, dass auf dem Gerät die für die Entwicklung erforderlichen Zertifikate vorhanden sind. In der SDK-Dokumentation finden Sie die geeigneten Sicherheitseins Device Connectivity Component
So my Securityoptions disable a Connection. Also I should provide Certificates.
What and where can I set the correct options for the phone?
I'm a bit worried, I did some small programming things just for fun, but everything works fine.
Also I installed VSDcerts.cab that is found in Visual Studio -> Smart Devices -> SDK -> SDKTools but nothing changed.
The phone is an unbranded HTC Touch Pro 2 with the origin ROM.
Thanks for your help
Hi,
hast du den Zertifikat-Unlock installiert um ohne Warnung Software installieren zu können?
Das könnte die VS Zertifikate stören.
---
Did you install the certificate-unlocker? This could interfere with the VS certificates.
Duke
I need help with my O² IIs; if I don't use it for a while (one to 20 seconds) the sound always turns off and I can't navigate or use the phone. The sound also cannot be set to a level (loud/quiet), because the adjuster hang down on quiet.
vielleicht versteht jemand hier meine Muttersrpache:
ich habe ein Problem mit meinem O² IIs-PDA: Immer wenn ich einen Augenblick warte (in der Regel nur einige Sekunden), schaltet sich der Ton immer wieder automatisch aus-> Er schaltet sich aber nicht nur aus, sondern blockiert auch die restliche Bedienung des PDAs. Wenn ich den Ton nun wieder aufdrehen möchte, springt der Regler immer wieder nach unten; die Lautestärkeverwaltung flackert, und mann kann in der Regel nicht bestätigen. ich hoffe, Ihr könnt mir helfen...
...ach ja, ich benuntze das Windowsmobile 6.5.5 BETA GER von D-Two
according to the forum rules, users are not allowed to post in any other language than english outside the threads that are in other languages already, like the german rom threads. since this is a question about the german rom, it could have been posted there and will probably be moved there.
grundsaetzlich sind nicht englisch-sprachige posts im forum unerwuenscht. zumal es sich um ein problem mit der deutschen rom handelt, waere es angebracht gewesen, dort zu posten
das kann im grunde nur 3 ursachen haben:
1. recht unwahrscheinlich: dein touch screen ist nicht richtig ausgerichtet, einfach mal nachjustieren ueber die einstellungen
2. sound wird auch vom radio rom geregelt, evtl ist da beim flashen was schief gelaufen, z.b. sim karte oder sd karte im geraet vergessen, und dann kann sich das radio schon mal verabschieden.
3. und am wahrscheinlichsten: der laustaerke regler an der linken seite des geraets hat einen schaden und moechte immer runterregeln, das wuerde dann erklaeren, wieso das geraet nichts anderes mehr akzeptiert, weil ja schon permanent eine taste gedrueckt wird und natuerlich auch, wieso der ton weg ist. einfach mal geraet oeffen und sich die ecke anschauen und ggf reinigen.
Hier ein Video meiner Situation
ich kann hier noch keine Links reinstellen, aber bei Youtube im Kanal von 1021380 findet Ihr das Video: es heißt "Xda lls sound bug"
danke fuer die Lösung - thanks for the solution
Sorry for writing german.
I'm a beginner in flashing or installing wm os; I destroyed my father's PDA by trying an update to Win mobile os 5.4. In the Internet, the original O² OS could`t be found. I tried everything half a year to get it work and realized now, that windows xp ist my best friend using updates/ upgrades. Then I found 6.5.5 - It works
1.) So: Thank you for your solution. I try open and clean it.
2.) The memorycard was outside the PDA
3.) what is a radio rom?
the radio rom:
you might have realized that during the booting process, there are 3 numbers, R, G, D
R shows you the radio version currently installed. D: shows the OS rom, meaning the rom you flashed, WM6.5.5 the file you flashed is named nk.nbf and the radio rom would be named radio_.nbf and the flashing process is exactly the same.
ok, but what does it do?
the radio rom handles all the hardware related things, meaning the OS rom uses drivers and the radio rom to actually handle the device, the GSM, GPRS, Wi-Fi, bluetooth, camera, sound, microphone...
sometimes it works well (no sound problem)...
I've got Radio rom 1.12.00 should I upgrade it to 1.15.00?
need i to flash radio rom like nk.nbf file or is the radio rom included in d-twos wm 6.5.5 rom?
radio roms are generally not included in the roms here. but after downloading a radio, the process of flashing is the same, remove the sim and sd card, put the device into bootloader mode, flash using maupgradeut_noid, after flashing, perform a hard reset, pressing power+reset and camera+record and in the menu set No Yes Yes.
and yes, you might want to upgrade the radio, the 1.15.00 is the newest version and seems to work great for most people including myself.
i flashed my PDA and the Radio rom, but I cannot get out of the bootoptions mode. The OS only starts if i take a soft reset
sorry, i did't read your tutorial, but the mail button doesn't work
on a device with broken mail button, you have to connect to the device using mtty (in the wiki). for that connection you have to put the device into bootloader mode, connect the device, start mtty, set it to usb or wceusb, whichever is provided, 115200, 8,1,no,none,none, hit ok and then it connects. press enter and it should show a prompt
USB>
type (not copy & paste), type:
task 28
task 0
then your device should hard reset and then restart, if it doesn't, just soft reset.
i just wanted to verify the 2 lines, but unfortunately, the wiki seems down atm. you should wait till tomorrow then.
thanks for your help - hope it works...
my father was so happy as I showed him his device; he doesn't care about the sound.
thank you very much for help.
GerToe
Right,here we go....this is what I had installed on my previously working mobile, I debranded it from Orange,and this exe caused me to have to pay for an unlock code:-
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
I today made the mistake of updating OTA to the Froyo OS
Now my phone is useless
It reboots every 2 minutes,theres no signal/network,no wifi,no nothing,it is FUBAR!
I've tried EVERY fix ie downgrade of HBOOT etc etc
However, my phone has remained on HBOOT 0.80 and nothing more,the rest of my phone details are as follows:
Android version 2.2
Baseband version 32.36.00.28u_4.06.00.02_2
Kernel version 2.6.29-0cb9f166 ([email protected] #1
Build number 2.09.405.8 cl218634
Software number 2.09.405.8
What the hell is wrong with it? I have no insurance so I really need help!
Oh, my SD Card doesn't show up neither otherwise I'd have created a new gold card!!!!
Please help
Debranded,,,, OTA,,,,, Mistake,,,,,,
Best bet is to grab a Goldcard of some desire or just a normal card and try rerooting from scratch, wiping everything on the phone and then starting again,
if you can get into recovery and use recovery-windows.bat you should be able to wipe it quite nicely
kurtish said:
Android version 2.2
Baseband version 32.36.00.28u_4.06.00.02_2
Click to expand...
Click to collapse
you can try a newer baseband
http://forum.xda-developers.com/showthread.php?t=687464
I think, I have read somewhere that Froyo requires a 5.xx.xx.xx baseband... Anyway it's worth a try!
kurtish said:
What the hell is wrong with it?
Click to expand...
Click to collapse
Nothing.... remember you have done things your phone is not setup to deal with. You bought a branded phone and therefore it is expecting branded updates etc. This is like buying a car, fitting a turbo-charger then complaining to the manufacturer when it stops working...
Anyway rather than rewriting this, try this
http://www.avforums.com/forums/htc-...s/1298529-desire-froyo-use-your-goldcard.html
Basically,FroYo requires a 2.6.32 kernel and a 5.xxx radio.I believe that once you get those it'll work.But still,strangely enough,they should all have been updated with the OTA...Well,I do believe there is something wrong!Most probably it's what jameson_uk said.
It was my fault......my Goldcard was buggered.....have managed to flash it back to life, just need to update the radio now.....can radios be installed via RUU as the 'update.zip' thing won't work.....HTC please accept my apology,I'm a ****
A goldcard during the OTA would have solved the problem. Heres a how-to-fix-it from a swiss forum. Its german but google translate should solve that:
1.
Sucht und ladet euch das Tool: GoldCardTool-0.0.5
2.
Sichert eure persönlichen Dateien von der Speicherkarte (Kartenleser am Laptop oder Rechner) und formatiert die Speicherkarte im Rechner (Fat32)
3.
Karte ins Handy und starten. Dann das Handy an den Rechner anschließen und warten bis die tolle "System Prozess reagiert nicht" Meldung kommt. Klickt auf Warten.
4.
Nun erscheint die Abfrage, für welchen Zweck die Karte sein soll. Klickt auf "HTC Sync" und führt möglichst schnell danach das o.g. Tool aus. Klickt dazu auf "GetCID".
5.
Nicht verzagen, wenn die CID nicht gleich beim ersten mal gelesen werden kann. Bei mir hat es auch mehrere Versuche gekostet. Falls es nicht beim ersten Mal klappt, versucht es weiter bis es geht. (Punkt 3 und 4 wiederholt ausführen)
6.
Wenn ihr die CID habt, klickt auf den Link darunter und lasst euch das Goldcard image via E-Mail zuschicken.
7.
Nun packt ihr die Karte wieder in den Rechner (Tool nicht vorher schließen !!!). Der Rechner erkennt die Karte und fügt sie in das Dropdown Menu ein (ansonsten "Refresh" klicken).
8.
Klickt auf "Load GoldCard Image" und sucht die Datei, die ihr per Mail bekommen habt.
9.
Klickt nun auf "Patch MMC" und ihr habt die ersehnte GoldCard
So, danach gehts wie folgt weiter:
10. Update (wenn nicht mehr vorhanden) von folgendem Link downloaden und als update.zip auf SD-Karte kopieren:
http://liveimage.htc.com/OTA_Bravo_F...crut4wrv30.zip
11. Karte wieder ins Gerät
12. Handy starten mit Druck auf Volume down und Power gleichzeitig, dann:
- "Recovery" auswählen und warten bis der Bildschirm mit dem roten Dreieck kommt
- "Volume up" und Power gleichzeitig drücken
- "Install update from update.zip" wählen
Dauert ein wenig, danach kommt die Meldung das man Reboot wählen soll. Also mit Power den Punkt Reboot bestätigen.
Handy startet einige Male neu, ohne wirklich Reaktion zu zeigen (auch auftretende Install-Balken ändern sich nicht wirklich), also bitte mal mind. 10 min zeit nehmen.
Greets
kurtish said:
It was my fault......my Goldcard was buggered.....have managed to flash it back to life, just need to update the radio now.....can radios be installed via RUU as the 'update.zip' thing won't work.....HTC please accept my apology,I'm a ****
Click to expand...
Click to collapse
I think you are being a little harsh on yourself there but it did put a smile on my face.
Lol
-10 chars
Reading this post really made my day
Mod Edit: This is an English only forum. Please use a translation service to first post in English. A copy of your post in your native language is allowed in case a multi-lingual member can offer help.
******
Hello
I got my desire hd versuht to rooten with aahk Kit (strictly according to instructions). Unfortunately, the bootloader still s-on.
I have tried:
put on htcdev.com the bootloader unlocked on => works
aahk the kit again execute => does not work, he does not find a device, or if you will be performing the hack Nonoperating certainly found the HAndy, the hack does not go through, but
What can I do now?
******
Hallo
Ich habe versuht mein desire hd mit dem aahk Kit zu rooten (streng nach Anleitung!) . Leider steht im bootloader immer noch s-on.
Versucht habe ich:
über htcdev.com den bootloader auf unlocked setzen => funktioniert
das aahk Kit nocheinmal auszuführen => funktioniert nicht, er findet kein device, oder wenn man den Hack im ausgeschalteten Zustand durchführt wird zwar das HAndy gefunden, der Hack läuft aber nicht durch
Was kann ich jetzt tun???
English please !
Only English is allowed on these forums
If you have a desire hd, switch of the antivirus, download the aahk again, reinstall the drivers as well, try again.
If you have the inspire 4g, use the hack kit as well, but the process is different if you have the latest software.
Relock the bootloader if you havent done that yet with htcdev.
Sent from a dream.
== >> Got it If anyone else has a similar problem: http://forum.xda-developers.com/show...&postcount=396
Steph.xda said:
Mod Edit: This is an English only forum. Please use a translation service to first post in English. A copy of your post in your native language is allowed in case a multi-lingual member can offer help.
******
Hello
I got my desire hd versuht to rooten with aahk Kit (strictly according to instructions). Unfortunately, the bootloader still s-on.
I have tried:
put on htcdev.com the bootloader unlocked on => works
aahk the kit again execute => does not work, he does not find a device, or if you will be performing the hack Nonoperating certainly found the HAndy, the hack does not go through, but
What can I do now?
******
Hallo
Ich habe versuht mein desire hd mit dem aahk Kit zu rooten (streng nach Anleitung!) . Leider steht im bootloader immer noch s-on.
Versucht habe ich:
über htcdev.com den bootloader auf unlocked setzen => funktioniert
das aahk Kit nocheinmal auszuführen => funktioniert nicht, er findet kein device, oder wenn man den Hack im ausgeschalteten Zustand durchführt wird zwar das HAndy gefunden, der Hack läuft aber nicht durch
Was kann ich jetzt tun???
Click to expand...
Click to collapse
I need to see the Hack Kit session, with the information provided there are too many variables involved to determine for certain what might have failed.
Hello everybody,
ich habe ein großes Problem!!! Ich habe mein HTC one x schon mit etlichen Roms ausprobiert und jedesmal das gleiche Problem gehabt.
Ich möchte unbedingt den neusten faux123 oder Franco Kernel (faux am liebsten) drauf haben um bessere Performenc zu erreichen; Sprich ich will einen übertakteten Kernel mit mindestens 1,7-2,1 MHz haben. Ich würde gerne das meine GPU Lesitung steigt und ich besser Tegra 3 Spiele spielen kann. Wenn es da andere bessere Kernel gibt nimm ich gerne Tips an
So und nun mein Problem:
Egal was ich versuche, ich kann nie einen anderen Kernel drauf packen als den des Roms!!! Egal was ich versuche!
Also ich weiß ja inzwischen wie ich Flashe: fastboot erase cache...fastboot flash boot name.img aber es nützt nichts!!! Sobald ich einen neuen Kernel geflasht habe und die moduls drauf gepackt habe und ich mein Handy neu starte fährt er nicht mehr hoch. Er kommt immer nur bis zum ersten HTC Zeichen. Ich weiß nicht ob es etwas damit zu tun hat aber nur mal erwähnt, habe ich Hboot 1.36 und mein Handy ist auch gerootet.
Könnt ihr mir sagen ob ich etwas falsch mache oder woran es liegt? Am liebsten würde ich wieder Paranoid Android drauf haben, aber wenn ihr mir etwas besseres empfehlen könnt bin ich auch gerne dazu bereit
Bitte helft mir ich bin schon nun mehr als 5 Tage an meinem Handy ohne Ergebniss!!!!
Liebe Grüße Ille
Moderator update
English translation
I have a big problem! I have my HTC one x already tried with several of Rome and each time had the same problem.
I really want the latest Franco kernel or faux123 (faux prefer) it have to achieve better Performenc; Say I want to have an overclocked kernel with at least 1.7-2.1 MHz. I would like to increase my GPU Lesitung the better and I can play Tegra 3 games. If there are other better kernel I gladly take tips on
So and now my problem:
No matter what I try, I can never grab it as a kernel of the Rome! No matter what I try!
So I know now how I Flashe: fastboot erase cache fastboot flash boot name.img ... but it's no use! As soon as I flashed a new kernel and the module had packed it and I reboot my phone it no longer boots up. He always comes up to the first HTC characters. I do not know if it has something to do with it but mentioned only once, I have HBOOT 1:36 and my phone is rooted.
Can you tell me if I'm doing something wrong or what it is? I would love to have it again Paranoid Android, but if you can recommend me something better I am also willing to share
Please help me I'm now more than 5 days on my cell phone without result!!
Greetings Ille
Ghost said:
Moderator update
English translation
I have a big problem! I have my HTC one x already tried with several of Rome and each time had the same problem.
I really want the latest Franco kernel or faux123 (faux prefer) it have to achieve better Performenc; Say I want to have an overclocked kernel with at least 1.7-2.1 MHz. I would like to increase my GPU Lesitung the better and I can play Tegra 3 games. If there are other better kernel I gladly take tips on
So and now my problem:
No matter what I try, I can never grab it as a kernel of the Rome! No matter what I try!
So I know now how I Flashe: fastboot erase cache fastboot flash boot name.img ... but it's no use! As soon as I flashed a new kernel and the module had packed it and I reboot my phone it no longer boots up. He always comes up to the first HTC characters. I do not know if it has something to do with it but mentioned only once, I have HBOOT 1:36 and my phone is rooted.
Can you tell me if I'm doing something wrong or what it is? I would love to have it again Paranoid Android, but if you can recommend me something better I am also willing to share
Please help me I'm now more than 5 days on my cell phone without result!!
Greetings Ille
Click to expand...
Click to collapse
franco and faux kernel's are outdated. try here http://forum.xda-developers.com/showthread.php?t=1832891
robchongke said:
franco and faux kernel's are outdated. try here http://forum.xda-developers.com/showthread.php?t=1832891
Click to expand...
Click to collapse
Hey thank you for your post
My Problem is still on I've tried it but it doesn't work ((
illeguth said:
Hey thank you for your post
My Problem is still on I've tried it but it doesn't work ((
Click to expand...
Click to collapse
try this kernel http://forum.xda-developers.com/showthread.php?t=2226360
illeguth said:
Hey thank you for your post
My Problem is still on I've tried it but it doesn't work ((
Click to expand...
Click to collapse
have you tried repack boot.img?
I heard about this but i really don't know how it works! what is repack? And for what is it good? (sry for my bad English i try my best )