Hey I have a sgs3 att baseband lh9 and I'm on a Verizon multi carrier rom synergy. I flashed the aosp mms from the att thread and now my phone is bricked and will not go to cwm or download mode. It does however pass the Samsung galaxy screen onto the custom boot and sits there... What should I do to be able to revive my phone?
Tyler.Boston1 said:
Hey I have a sgs3 att baseband lh9 and I'm on a Verizon multi carrier rom synergy. I flashed the aosp mms from the att thread and now my phone is bricked and will not go to cwm or download mode. It does however pass the Samsung galaxy screen onto the custom boot and sits there... What should I do to be able to revive my phone?
Click to expand...
Click to collapse
You can always try a jig. The fact that it is actually coming on at all is a good sign
aybarrap1 said:
You can always try a jig. The fact that it is actually coming on at all is a good sign
Click to expand...
Click to collapse
I actually got it into download mode! What should I do now?
Now that your in download mode you can use Odin to flash to a stock rooted rom and go from there.
Sent from my SAMSUNG-SGH-I747 using xda premium
Related
I just rooted my fiance's epic 4g/samsung galaxy s2 with Odin (she was/is on FJ12 firmware) and after rooting, I am just wondering how I would go about flashing a new rom onto it. Is it safe to use android recovery to flash a rom with CWM? Just wondering where to go from here. Rooted 3 devices and flashed them but they usually came with CWM. Not sure about android recovery
Veight said:
I just rooted my fiance's epic 4g/samsung galaxy s2 with Odin (she was/is on FJ12 firmware) and after rooting, I am just wondering how I would go about flashing a new rom onto it. Is it safe to use android recovery to flash a rom with CWM? Just wondering where to go from here. Rooted 3 devices and flashed them but they usually came with CWM. Not sure about android recovery
Click to expand...
Click to collapse
Are you sure your in the right forum I've never heard of fj12 for the epic touch
Sent from my SPH-D710 using xda premium
sasquatchotragavaca said:
Are you sure your in the right forum I've never heard of fj12 for the epic touch
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
FJ12 is virgin mobile.
I have no idea if flashing roms for you will be same as flashing for sprint. I have steps listed here - http://forum.xda-developers.com/showthread.php?t=1953783 but thats keeping sprint in mind.
Well, I got my rooting from here. Doesn't say anything about flashing a new rom onto it though. :\
Veight said:
Well, I got my rooting from here. Doesn't say anything about flashing a new rom onto it though. :\
Click to expand...
Click to collapse
Same H/W (just like my MVNO) - just different settings.
Flash as if it's Sprint but keep in mind that MMS will break until you manually correct and things will show as Sprint, not Virgin. Not sure if 4G will need the realm changed or not...
bought a galaxy S3 for AT&T off ebay. just arrived today. the phone powers on but, i cant access wifi, settings or apps... also no usb support. is this phone in some kind of a store demo mode or is it bricked? i thought if a phone was bricked, it will not cut on at all. i have a feeling i'm going to have to raise hell with ebay and paypal. i would prefer to try to fix it before doing all that. besides that, the phone is in great shape.
try getting it into download mode and using odin to put a stock rom on it. make sure of your phone model first, though.
sent from my I747
cehf said:
try getting it into download mode and using odin to put a stock rom on it. make sure of your phone model first, though.
sent from my I747
Click to expand...
Click to collapse
hmmm... the phone is not rooted. i dont speak that language.
Stock firmware for all S3 variants can be bound here: http://forum.xda-developers.com/showthread.php?t=1968625&highlight=stock+firmware
Locate the at&t option and select DLK3. That's the touchwiz at&t jelly bean firmware. The instructions for flashing it to your (unrooted) phone are on the page. There are also videos on YouTube of people using Odin to flash stock firmware if it would make you feel more comfortable.I would boot into recovery, wipe data and reboot. Flash the firmware and then boot into recovery again to wipe data again. Should be good after that.
Boot into recovery mode and try resetting to factory default.
Sent from my SGH-I747 using xda premium
Hello,
I was at 4.0.1 and I have tried to install 10.1 (after installing the ROM Over kernel).
I get i9100 screen on startup and it does not boot.
However, I am able to access recovery and Download Mode (I can flash using Odin)
Can anyone direct me towards how I can install a custom ROM?
Help would be appreciated.
Well you got lucky...
Doing that will hard brick your phone....
Go in to download mode and install a one-click and that shoulf get you back to stock
And make sure that you are flashing ROMs for the E4GT ONLY.
Laughing at you while eating Jellybeans
gamepro602 said:
Well you got lucky...
Doing that will hard brick your phone....
Go in to download mode and install a one-click and that shoulf get you back to stock
And make sure that you are flashing ROMs for the E4GT ONLY.
Laughing at you while eating Jellybeans
Click to expand...
Click to collapse
Not entirely true. Some kernels will provide the i9100 splash screen.
OP. What exactly did you flash?
Also, do not double post. You already posted in the general section.
Sent from my SPH-D710 using xda premium
hey, have been reading around but kind of need a quick "this is what you do" answer!
so, flashed cw6 with odin, popped omni rom onto my device , rebooted into cwm6 and installed rom. Install aborted, and now it just boot loops to recovery as its formatted the previous rom.
All i want really is to get a stock rom onto the device (or a fixed status7 issue rom) but i cant for the life of me remember how to get the phone to go into a download mode so i can push the rom over.
Any help?
Download mode = phone off - home/vol down/power.
MistahBungle said:
Download mode = phone off - home/vol down/power.
Click to expand...
Click to collapse
yup im in download mode, but im confused as to how to get a rom onto my device (its not showing up in windows and odin isnt liking .zips?)
also noticed this is in galaxy s2 and i have a note2, but principle is still the same!
That's beside the point. I'm asking mods to move your thread to Note II Q&A.
psypher5 said:
yup im in download mode, but im confused as to how to get a rom onto my device (its not showing up in windows and odin isnt liking .zips?)
also noticed this is in galaxy s2 and i have a note2, but principle is still the same!
Click to expand...
Click to collapse
Odin flashes tar not zips... Do some reading before u mess with the device and blame the developers
.
Lol..
Sent from my GT-N7100 using XDA Premium 4 mobile app
Hi guys, I really need your help
I've flashed my galaxy s3 (Rogers i747M) and my friends one too (Virgin i747M) with the cyanogenmod installer without any hiccups. Today a friend of mine asked me if I could do the same with his (Telus i747M) but after the installation, when it reboot a message appeared telling me that it might overight the stock recovery. Regardless if I say yes or no, the phone still boots with stock 4.3 touchwiz.
The problem is, google services doesn't work anymore. It doesnt want to download from the play store and this prevent the phone from using any application. I tried to recover it with KIES by entering de S/N and the model but when I clic start after plugging the phone it tells me that my phone version isn't supported. Furthermore, when I go start the OTA update application on the phone it says it cannot work because de the phone ''has been modified''.
Seems like the CM installer broke the phone....
So I'm stuck right now. Can I flash the stock files with odin or heimdall? If so where can I get the files?
Many many manyyy thanks!
Just look around the s3 section I believe there is a sticky with all the s3 flashable Odin files
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
Just look around the s3 section I believe there is a sticky with all the s3 flashable Odin files
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
Okay, do you think I only need to flash a recovery and the stock ROM?
EDIT; I'm very worried that I bricked the phone with the CM installer, can it be the case ?
No if the Roms booted your fine and flash will do a full reinstall of stock including modem, bootloader, everything just flash and try to install cyanogen again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
No if the Roms booted your fine and flash will do a full reinstall of stock including modem, bootloader, everything just flash and try to install cyanogen again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
Okay then I'll try to manually flash CWM recovery tonight and then install CM11 d2lte snapshot 6 from the recovery. I've heard about the knox bootloader and that it could be dangereous for the device if you try to flash another recovery, is it still the case?
Thanks btw!
I haven't seen any reports about it so you should be fine..... The only problem people had was downgrading to android 4.1.1 I believe it was or installing a older modem......so you should be fine with the recovery and I hope you know it will trip the Knox counter and void your warranty btw
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
I haven't seen any reports about it so you should be fine..... The only problem people had was downgrading to android 4.1.1 I believe it was or installing a older modem......so you should be fine with the recovery and I hope you know it will trip the Knox counter and void your warranty btw
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
Yeah I know that, no problem. I'll try when I get home tonight, thanks for your help!
I recommend flashing your phone with a pre-rooted Telus ROM via Odin from here: http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=238585987
Flash Philz custom recovery via Odin from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Now, you'll have a stock rooted ROM with a custom recovery.