Develop Bugs

[Q] 3.5 Headphone Jack Issues

Hi guys!
I searched around for this problem, but couldn't find a good answer. I am using my Desire HD with the Klipsch Image S4 IEMs (great headphones!) and recently I have this very annoying issue.
Most times when I plug the headphones in they get recognized as a headset (with microphone and buttons) and the slightest movement causes the music player to start playing or change or song, or what's even worse, the phone to redial the last call.
At first I thought the headphone jack had gone busted so I tried with my full sized Beyerdynamic DT770 PRO cans, but I get the same issue. When I use the stock headset that came with the HD however, there's no problem.
I think what's happening is that the 3 part plug (as opposed to the 4 part of the stock headset) doesn't always make good contact, or it touches the connector for the 4th part briefly at insertion, and it creates this problem.
Does anyone else have this issue? Is it possible that the plug on the phone is busted? I don't feel like sending the phone in over such small thing, but it is pretty annoying...
Thanks!

I have the same IEMs as you do, and I have not noticed that problem. I had similar issues with my Xperia, cleaning the 3.5 mm female connector helped for a while, but I eventually had to send my phone back to be repaired.
Sent from my Desire HD using Tapatalk

jkoljo said:
I have the same IEMs as you do, and I have not noticed that problem. I had similar issues with my Xperia, cleaning the 3.5 mm female connector helped for a while, but I eventually had to send my phone back to be repaired.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
That's what I was afraid of Thanks anyway!

el_commandante said:
Hi guys!
I searched around for this problem, but couldn't find a good answer. I am using my Desire HD with the Klipsch Image S4 IEMs (great headphones!) and recently I have this very annoying issue.
Most times when I plug the headphones in they get recognized as a headset (with microphone and buttons) and the slightest movement causes the music player to start playing or change or song, or what's even worse, the phone to redial the last call.
At first I thought the headphone jack had gone busted so I tried with my full sized Beyerdynamic DT770 PRO cans, but I get the same issue. When I use the stock headset that came with the HD however, there's no problem.
I think what's happening is that the 3 part plug (as opposed to the 4 part of the stock headset) doesn't always make good contact, or it touches the connector for the 4th part briefly at insertion, and it creates this problem.
Does anyone else have this issue? Is it possible that the plug on the phone is busted? I don't feel like sending the phone in over such small thing, but it is pretty annoying...
Thanks!
Click to expand...
Click to collapse
Seen the same thing when using my external speakers, something goes funny with the resistance or capacitance.
Difficult to test unless you sacrifice the cable
Try cover the 3rd and 4th section with nail polish or some other non-conductive stuff.
Ideas? Maybe lookup the schematics of the jack and confirm contact areas, then fix up as needed.

leppie said:
Difficult to test unless you sacrifice the cable
Click to expand...
Click to collapse
I can easily get a 3 and 4 section jacks and cables on the cheap for testing purposes. Do you have an idea of how to go about testing it in some systematic fashion? I wouldn't mind cutting the cable of the headphones and soldering my own jack at the end of it if I am sure that it will work reliably.

el_commandante said:
I can easily get a 3 and 4 section jacks and cables on the cheap for testing purposes. Do you have an idea of how to go about testing it in some systematic fashion? I wouldn't mind cutting the cable of the headphones and soldering my own jack at the end of it if I am sure that it will work reliably.
Click to expand...
Click to collapse
Try measure the lengths accurately from the headset included with the DHD.
There might just be some overlapping. If that is not the case, it might be a bit problematic.

leppie said:
Try measure the lengths accurately from the headset included with the DHD.
There might just be some overlapping. If that is not the case, it might be a bit problematic.
Click to expand...
Click to collapse
There's no overlapping, but the tip of the S4s is a tiny bit shorter and a bit thinner at the base of the last, topmost, part. Weirdly enough I just cleaned the tip a bit and that seems to have solved the problem for the time being...
Maybe the dirt was leading to some resistance? Do you know how the buttons work?

Jack problem

On my WFS jack connector jumps out about 1mm... it is big problem because it stop playing music. WHY? Does somebody have same problem?
Sent from my Wildfire S (root, cwm..)

i used to get this ALOT if i just use my standard headphones directly into the socket. even if it doesn't "pop out", the slightest movement of the headphone jack would cause it to "disconnect" and stop playing music.....VERY annoying.
I managed to "fix" it by simply buying, a cheap as chips headset adapter on amazon. I have no idea why this works, as the plug on the end looks identicle to the one on my headphones, but for some reason, if i use my headphones i get disconnects.....if i use the wired headset adapter then plug my headphones into that it works. no more disconnects.
like i said, no idea WHY this is the case, but it worked for me. i juse bought the cheapest one i could find, i think it was around £2 on amazon.

lapeno022 said:
On my WFS jack connector jumps out about 1mm... it is big problem because it stop playing music. WHY? Does somebody have same problem?
Sent from my Wildfire S (root, cwm..)
Click to expand...
Click to collapse
if your using the original headset, i would do as stated above or:
go back to the shop and ask a refund or repair.
if your using your own headphones:
try using your headphones in other devices (pc, mp3 player) and see if it does the same, if not contact the company where you bought your wfs if you still have warrenty, i would not accept this kind of hardware failure.
good luck with your headphones

GLORIS:
Well, i have Razer Electra headphones... it have support for HTC (mic on wire, 4-pin jack)
JACK ON BOTH, ELECTRA AND ORIGINAL HTC EARPHONES ARE SAME SIZE!!!
my theory: magnetic??? your jack from amazon is magnetic, check this now please
VitanyLTD:
phone is ok, original earphones from HTC connect perfect but others not.
YEP! HTC earphone JACK CONNECTOR IS MAGNETIC, SO WE NEED MAGNETIC 4-pin JACK CONNECTORS!!!!
best will be reduction JACK MALE 4pin to JACK FEMALE 4pin
AFTER THIS I HATE HTC FOR HARDWARE SUPPORT!

Looks my orginal htc headset is not orginal or something cus same thing happening to me.

that's a negative on the magnetism front :s

as I sayd... and headset adapter is magnetic?

no, neither the headset nor the headphones are magnetic. I can genuinely see absolutely no difference between the two plugs, but one works, one doesn't :s

then i don't know.

I to have problems with 3.5mm in car its loose any slight movement will turn off music. i will find an adapter to.

I need JACK 3.5mm 4pin reduction for my headphones.. On cable I have mic...
can somebody find it JACK 3.5mm 4pin male to JACK 3.5mm 4pin female? I can't find anything...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110760294384
just ordered this. according to the listing there are 3 in the pack, and that's only around £2.70. So if it works out well, and anyone in the uk wants one I should have 2 spare when they arrive, just let me know if you want one and you can have it. I'll try it out first when they get here though. From the description, it sounds like it takes the 3.5mm 4 pin (with headset) and converts it to 3.5mm 3 pin (normal headphones). So it should be perfect if you don't want use of a mic/headset.
My headset cable adapter works well to be fair, but the extra cable does make thigns a bit unmanageable, so hopefully this adapter will work out a bit better

I had the same problem. After trying different headphones, I decided to take a small slotted screw driver.
Just stick it into the slot and turn it a few times without too heavy pressure and now everything works nice!

wfbml said:
I had the same problem. After trying different headphones, I decided to take a small slotted screw driver.
Just stick it into the slot and turn it a few times without too heavy pressure and now everything works nice!
Click to expand...
Click to collapse
LOL, you should be a doctor... a surgeon man ... just stick your knife in a man without too much pressure, and it works out perfectly ... lol ... or maybe a butcher better

Haha...yeah, that's how I deal with my problems xD
No seriously, I was really worried before I did it but it worked out fine!

those plugs for headphones 'felt' cheap the first time i plugged my headphones... they rly have little something that stops you from plugging propperly so you just roll it few times, i did it with my hp-s...just roll and push a bit... and i smiled just how u did it with screwdriver xD
but the main thing is, that it works... you guys decide: screwdriver or headphones jack xD
Sent from my HTC Wildfire using xda premium

I personally would go for a screwdriver and a hammer...
EDIT: I had that problem with a pair of Creative EP630 in-ear headphones (cheap eBay copy).
Since I bought my Sony MDREX-50LP (guaranteed original) never had that issue.
The sound with Poweramp is absolutely FANTASTIC.

Was so Angry when I first found this problam, I listen to a lot of music. I twisted the Headphone jack a couple of times and Voila!
Thank you Wfbml + b02!
Now I can enjoy my SteelSeries Siberia V2's as well as my Hi-Fi on my WFS!
Yes, I do have the Beats "Mod" Installed.

YES!!!
Sorry for digging up an old topic but I just had to say thank you so much for the screw driver fix : it worked like a charm and I can finally make use of my music again!

M_Nation said:
Sorry for digging up an old topic but I just had to say thank you so much for the screw driver fix : it worked like a charm and I can finally make use of my music again!
Click to expand...
Click to collapse
Dude thanks for digging it up, I've been having the same problem and now its fixed. This should be in the FAQ

FM Transmitter Question

Okay, I have an older car (2001 Dodge Stratus)
The stereo is not stock but it is still old and does not have a USB or 3.5mm connection. I used to use my ipod for music so I bought a --static.bhphoto.com/images/images345x345/424579.jpg--- for my car. (It plugs into the cigarette lighter and connects usb to ipod connection).
If I take the connector out I can run USB to Micro USB for my Galaxy s3 and it will charge. However if I go onto google music the sound will not come through my car speakers.
Can my device do this? Do I need a new device, that goes into my cigarette lighter? Do I just need a new stereo? I thought I would be able to still use the same FM transmitter via usb but it seems to not work. Are there 3.5mm cigarette lighter FM transmitters I could use instead? Any help would be awesome. Thanks so much ahead of time.

I just bought this:
Go groove flex smart x2 (not allowed to post links yet)
Play to your radio over your phone's Bluetooth. I've only had it for two days, but it's working really well. I've called over it, and the other end didn't realize it was over speaker, so it's nice and clear. You can charge your phone too out of the device, but it's a lot easier to just jump into your car and it sync on its own and just start playing music.

da6ec975 said:
I just bought this:
Go groove flex smart x2 (not allowed to post links yet)
Play to your radio over your phone's Bluetooth. I've only had it for two days, but it's working really well. I've called over it, and the other end didn't realize it was over speaker, so it's nice and clear. You can charge your phone too out of the device, but it's a lot easier to just jump into your car and it sync on its own and just start playing music.
Click to expand...
Click to collapse
Does this work on older cars that do not have bluetooth built in already?

Noxie said:
Does this work on older cars that do not have bluetooth built in already?
Click to expand...
Click to collapse
I guess I didn't explain clear enough, I'm sorry.
This device receives the Bluetooth from your phone, then transmits over your car's radio.

da6ec975 said:
I just bought this:
Go groove flex smart x2 (not allowed to post links yet)
Play to your radio over your phone's Bluetooth. I've only had it for two days, but it's working really well. I've called over it, and the other end didn't realize it was over speaker, so it's nice and clear. You can charge your phone too out of the device, but it's a lot easier to just jump into your car and it sync on its own and just start playing music.
Click to expand...
Click to collapse
I use the same thing and works great.
Sent from my GT-I9300 using Tapatalk 2

Oh wow thanks so much! It can do calls too?! Sounds excellent guys. Ill look into it

That seems like a really promising device, but it kinda pricey, at least for me.
Anybody have any alternatives?
(I'm in the same situation as the OP)

khoikn said:
That seems like a really promising device, but it kinda pricey, at least for me.
Anybody have any alternatives?
(I'm in the same situation as the OP)
Click to expand...
Click to collapse
It's seems like a high price, but for all of the features it's a pretty decent deal. I bought it from newegg. They have/had a promotion for ten dollars off.

khoikn said:
That seems like a really promising device, but it kinda pricey, at least for me.
Anybody have any alternatives?
(I'm in the same situation as the OP)
Click to expand...
Click to collapse
If you don't mind having to plug in some cables, there are plenty of FM transmitters out there that use a regular 3.5mm connection (to connect the transmitter to your phone) for Audio.
Some of them run on batteries, others you have to plug into your cigarette lighter. Some of those offer a micro USB cable or a USB port to charge your phone with, others don't.
Just look around on amazon or ebay. My experience with those transmitters wasn't good but it's been a while. Maybe newer devices work better.
Definitely get one where you can choose from a wide range of channels not one of those where you only have like 3 channels. Because depending on where you live there might be many radiostations that can overlay the signal of your transmitter. You have to find a channel that isn't used in the area where you usually drive around in.

Headphone jack issue

Hey people, I was wondering if anyone has had the faulty headphones issue. After a few days, my headphones stopped working properly, there was a lot of static and they need to be pushed and held towards the screen to function again. This is going on with 3 pairs so it's a phone fault.Maybe all the tech savvy experts here can chime in and propose something.
Thanks!

I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.

shadowseed said:
I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.
Click to expand...
Click to collapse
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar

therealtry said:
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar
Click to expand...
Click to collapse
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.

shadowseed said:
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.
Click to expand...
Click to collapse
Hey shadowseed,
I took it to a couple of guys in downtown Athens and none said they wanna take a look at an Elephone. And these were techie Asian guys lol. Let me know if you find anything via pm or through here. Thanks. I'll keep looking myself otherwise I'll buy bluetooth headphones.

the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.

Put some solder on every point now. That fixed the problems for me, looked like there was no solder there.

Same on my phone >.< seems that the headphone jack has been horribly designed/built then!

The design is excellent, but there are multiple points with no solder on top, just glued or something. That can obviously not work in the long term.. The fix is very easy if you have a soldering iron, you don't need precision tools.

Hello
I have the same problem. I've bought it a few days ago (it has not one month).
What can I do? This phone is warranted?
Thanks,
Diego

shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Could you please give us a detailed tutorial on how to open up the elephone?
I've tried it today (got the same problem) and failed on removing the white case from the fingerprint scanner.

You can see here: KlickKlack

I've tried soldering the points today and the connection seems more stable for now.
No more bzzing in idle when using headphones (Teufel Aureol), but the quality still sounds like some bad compressed mp3.
Pushing the plug (display frontfacing) to the back left seems to fix the problem.
I've tried putting cardboard between the 3.5mm port and the casing of the phone but no luck.
When using in-ears (some cheap philips) there is still a semi-loud bzzing in the backgroud and since the cable goes sideways there is no way of getting a stable connction.
Did I do faulty soldering or might I've broken the port with the soldering iron?
puu(.)sh/ltJDW/ea70467ca2.JPG - Image 1 (Note: I already resolded the point that seems unstable.)
puu(.)sh/ltJNx/08d0ead27a.JPG - Image 2

shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Thanks!!!

i'm in the business too, since two days, bought a bt dongle, with eragon rom no bad sound issue, but the asycronious in videos of sound and lips movement is bad, so i have to solder...i need an iron, tomorrow i will try, i hope i will fix it. what about warranty??
thanks for the solutions

I don't care much for warranty on a china phone...

I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?

schakalakka said:
I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?
Click to expand...
Click to collapse
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?

Romeo76 said:
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?
Click to expand...
Click to collapse
Unfortunately it is still the same.

Well looks like im sticking to bluetooth headphones, was hoping someone would confirm the soldering would fix it.

Static noise when headphones are plugged-in

Hello,
So I have my Zenfone 2 since some months now and since the start, my phone has a problem:
When I plug earphones or headphones, there's a static noise on the left earphone (or on the left side of the headphone).
I contacted Asus, they told me to update my firmware, which I did (I even updated to MM today), but it didn't fix the issue. So they told me to RMA it.
I'm just posting this to know if someone here got the same problem and if he fixed it. I saw a post on a forum which said to deactivate every single sound (notification, etc) and only activate multimedia sounds. For some reason, it worked, and I didn't ear the static noise again but some days later. I tried to do this operation again but it doesn't seem to work.
Thanks for your help,
Best regards,

Have you tried cleaning your jack input?

oguz298 said:
Have you tried cleaning your jack input?
Click to expand...
Click to collapse
I thought of that but I don't really know how to do to be honest, I don't wanna break anything. How should I do it? Should I wet the tip of a cotton swab and "polish" the jack input?
Thanks for your reply!

Spidersouris said:
I thought of that but I don't really know how to do to be honest, I don't wanna break anything. How should I do it? Should I wet the tip of a cotton swab and "polish" the jack input?
Thanks for your reply!
Click to expand...
Click to collapse
Usually i dont use liquids on my phone. Get a pin and a light source. First look inside of the jack if there is some dust or cotton thingys take out with pin

oguz298 said:
Usually i dont use liquids on my phone. Get a pin and a light source. First look inside of the jack if there is some dust or cotton thingys take out with pin
Click to expand...
Click to collapse
Hello!
I tried to see if there was some dust in it but couldn't find anything. I, however, used the pin but the problem still persists
I noticed that when I was plugging in my earphone, if I plug in "at the middle" of the jack, there will be sound on the left earphone but not on the right. If I plug it in completely (when you hear the "click" sound), then there'll be sound on the right but not on the left earphone, like I first said on the first post. Maybe this can help you.. I'd like to not send it but if I really have to, I will ._.
Thanks for your help.

Have you tried another headphones?

oguz298 said:
Have you tried another headphones?
Click to expand...
Click to collapse
Yeah, I've tried 3 different headphones but the problem still persists.

You can clean it with a compressed air can, the kind that is used to clean computers. I have one at home to clean my keyboard from tieme to time and have also used it to clean the headphone jack, since it doesn't use any liquid. You can get one at the local computer store or online from Amazon and similar sites

jman0 said:
You can clean it with a compressed air can, the kind that is used to clean computers. I have one at home to clean my keyboard from tieme to time and have also used it to clean the headphone jack, since it doesn't use any liquid. You can get one at the local computer store or online from Amazon and similar sites
Click to expand...
Click to collapse
Hello,
Fortunately, I had a compressed air can at home. I tried to clean it with that but the problem is still here
Thanks for your help though, I really appreciate it.

So I "resolved" my problem.
Since I think my jack is broken, I bought this on Amazon. So I did a little setup so I can properly hear music/sounds:
I have a Logitech G430. When I want to listen to music on my phone, I plug my earphones on the G430 adapter, then I plug the USB cable into the USB-microUSB adapter I just bought, and I plug the microUSB cable to my phone. And it works perfectly!
Some may say It's a pretty rough setup, but for me, as long as it works, that's perfect.
Thanks for your help!

Spidersouris said:
So I "resolved" my problem.
Since I think my jack is broken, I bought this on Amazon. So I did a little setup so I can properly hear music/sounds:
I have a Logitech G430. When I want to listen to music on my phone, I plug my earphones on the G430 adapter, then I plug the USB cable into the USB-microUSB adapter I just bought, and I plug the microUSB cable to my phone. And it works perfectly!
Some may say It's a pretty rough setup, but for me, as long as it works, that's perfect.
Thanks for your help!
Click to expand...
Click to collapse
I'm sure a pair of cheap BT headphones is cheaper than that setup. Anyway, if you want to keep using your 3.5mm headphones (I would since mine are very nice and were expensive) you can also try a 3.5 to BT adapter, which is also a cheap and nice option. Music through BT is usually of less quality than through the audio jack, but it¡s better than nothing and you don't need so many cables.
Something like this: https://www.amazon.com/dp/B00UUDZSKE
That one is $19, but you can probably get a cheaper one from a Chinese store such as Dealextreme, GearBest, etc. I have one which I got on eBay years ago and I think it was worth something around €10