Develop Bugs

[Q] Anione help me

Hy everione, I flash my One X whit a rom (skydragon) i think, them in the start my phone restarts, and turn off and restarts and dont stop. I try to solve the problem in Recovery and becouse im noob I delete ALL in the memory, now the One X starts and stay stop in the Logo, I dont know how put another rom or do something, PLS I need help.
THXX

1-BOOTLOADER:
Open your bootloader - hold vol down and power button for 15 seconds
check that your Hboot version is less than 1.23 (1.12 or lower) and your bootloader is UNLOCKED, if not then you have to read more
flash a custom recovery(like CWM) from fastboot fastboot flash recovery C:/....recovery.img
Find your(skydragon) zip file, and you will find a boot.img file inside it, copy it to your computer
Flash the boot.img you copied to your computer fastboot flash boot C:/...boot.img
2-RECOVERY and INSTALL
go to the recovery from the bootloader, mount USB storage and place the zip on the SD
Install zip from sd, find your rom and install it
clear cache
3-Restart your device and everything should work
note: it might take time to load first time
If your bootloader is 1.23/1.28/1.31/1.33 then you might have errors after installing(but the same method will also work)

I tried that, but when I go to put usb storage says a error , I cant put nothim in the memory, i tri to instal a ruu but im not find the correct
there is a ruu that works in all??? i dont know my cid .
thxx

what error you are getting ? and type this in bootloader to know which ruu to use : fastboot getvar mainver
edit: try reflashing the latest CWM recovery

Error 155.in the ruu

what is the mainversion and your bootloader version ? type fastboot getvar all to see all your phone's info

Vcek said:
what is the mainversion and your bootloader version ? type fastboot getvar all to see all your phone's info
Click to expand...
Click to collapse
Hi Vcek, I'm facing a similar situation as well. I flashed my phone using ARHD 14.2. Found out later that it does not support my phone. Wrong CID (Yes, did not read carefully and did a noob job on it.). Found out from others that I can return back to a previous ROM which I have. Problem was that I could not mount my USB drive. Gave me message "Unable to load usm lunfiles..." something like that. So I was then advised to perform a "Fastboot flash recovery recovery.zip". Did that and got the following:
fastboot flash recovery recovery.zip
sending 'recovery' (532446 KB)... OKAY [ 72.375s]
writing 'recovery'... INFOFormat partition SOS done
FAILED (remote: (0000000a))
finished. total time: 72.602s
When I returned to the bootloader, This time round, I cannot even enter recovery mode. It just loops back to the first screen of the bootlader. Selecting HBOOT, some messages flashed saying that "Failed to open sdcard, dalvik cache, etc, etc.
I then tried to load back the latest 5.8.4.0 CWM using "fastboot flash recovery cwm 5.8.5.0,img". It gave me another error "error: cannot load 'cmw 5.8.4.0.img"
My bootloader information is as follows:
INFOversion: 0.5a
INFOversion-bootloader: 0.94.00
INFOversion-baseband: 1.1204.10
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.707.10
INFOserialno: SH23GW108459
INFOimei: 359188045101102
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4062mV
INFOdevpower: 93
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Any help will be much appreciated.

Microsoft Windows [versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Users\Usuario>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.43.0000
(bootloader) version-baseband: 1.1204.103.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.2
(bootloader) serialno: SH23JW112582
(bootloader) imei: 359188045307139
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.938s
C:\Users\Usuario>
Here the fastboot getvar all, pls how i can get my cid, i wanna know how ruu to use, pls .

renan.cauchick said:
(bootloader) version-main: 1.26.707.2
Here the fastboot getvar all, pls how i can get my cid, i wanna know how ruu to use, pls .
Click to expand...
Click to collapse
I think it's HTC__044
This command:
fastboot oem readcid
Will get it.

how i unlock the bootloader, i lock for aply ruu but i get the error 177??

My bootloader is relocked, my phone ( one x) dont have a rom, nothim.... the only thing what he do is enter in the bootloader, pls help me solve the probllem, when i put a ruu throuth the Windows say na error ( 170 ) the usb is not conected . pls Help.

[Q] (Semi) Bricked Hboot 2.00.0027

My brother bricked his DHD, but he did really nothing wrong no I'm trying tot get the phone back to work. But there are so many methods described that I'm kinda lost.
First some information
-There doesn't seem to be any rom or recovery left, just fastboot(?) seems te be there.
That screen has the following information
Code:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
eMMC-boot
Sep 7 2011,19:06:24
Fastboot USB
I would appreciate if someone can give me a pointer in the right direction?
-Flash an original recovery (where can i find these?)
-Flash an complete stock-rom (where can i find these?)
-Try to get S-off? Which software should I use than? The thing I did find like revolutionary don't seem to work with an phone with just fastboot.
*Sorry for the bad English, I'm not a native-speaker

You have no idea at all what he did? Wait for glevitan to show up, but maybe you could run a RUU...

bananagranola said:
You have no idea at all what he did? Wait for glevitan to show up, but maybe you could run a RUU...
Click to expand...
Click to collapse
He probably tried to flash something, messed up. He than ask a friend for help who messed up even further. Probably didn't read the tuts good enough.
I have some experience flashing phones (Xperia X1, G1, Galaxy S,). But I'm stuck with this litle challenge.

Any way you can figure out what they did? Like, could you ask them for a link?

bananagranola said:
Any way you can figure out what they did? Like, could you ask them for a link?
Click to expand...
Click to collapse
If I could I would, but the litle bastard ignores my message's and calls.

Xacky said:
If I could I would, but the litle bastard ignores my message's and calls.
Click to expand...
Click to collapse
I'm surprised you're even trying to fix it for him...wait for a guy named glevitan to show up. I'm guessing you can run a RUU, but wait for glevitan to confirm.

Small update on thing I did
-Tried ruu's with an higher version number than the current firmware the phone suppose to have (3.13.161.5) The same version doesn't same avaible.
This wasn't succesvol
-Trying to create a goldcard but the cid I get from fastboot getvar cid isn't valid when I enter it in http://psas.revskills.de/?q=goldcard
-Trying to flash an other recovery, but is says unsigned etc.
Thnx for the replies for so fare

Xacky said:
Small update on thing I did
-Tried ruu's with an higher version number than the current firmware the phone suppose to have (3.13.161.5) The same version doesn't same avaible.
This wasn't succesvol
-Trying to create a goldcard but the cid I get from fastboot getvar cid isn't valid when I enter it in http://psas.revskills.de/?q=goldcard
-Trying to flash an other recovery, but is says unsigned etc.
Thnx for the replies for so fare
Click to expand...
Click to collapse
ok, I guess you can still access hboot and that takes no longer than 30 secs. If that is the case, then it is good. If you are willing to flash a ruu you will need to get the CID number first.
Do the following:
Boot in hboot and plug the phone
If it says HBOOT USB PLUG in the phone, press power button to toggle to fastboot usb
open a cmd in the PC as admin
type: fastboot getvar all
paste that information here, deleting the IMEI.

glevitan said:
ok, I guess you can still access hboot and that takes no longer than 30 secs. If that is the case, then it is good. If you are willing to flash a ruu you will need to get the CID number first.
Do the following:
Boot in hboot and plug the phone
If it says HBOOT USB PLUG in the phone, press power button to toggle to fastboot usb
open a cmd in the PC as admin
type: fastboot getvar all
paste that information here, deleting the IMEI.
Click to expand...
Click to collapse
Code:
C:\androidsdk\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.161.5
(bootloader) serialno: HT0C8RX19402
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: VODAPE17
(bootloader) battery-status: good
(bootloader) battery-voltage: 3799mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
This is the complete output (x-ed away the imei).

Xacky said:
Code:
C:\androidsdk\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.161.5
(bootloader) serialno: HT0C8RX19402
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: VODAPE17
(bootloader) battery-status: good
(bootloader) battery-voltage: 3799mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
This is the complete output (x-ed away the imei).
Click to expand...
Click to collapse
ok, there is no RUU for your device...you said that you created a goldcard?

glevitan said:
ok, there is no RUU for your device...you said that you created a goldcard?
Click to expand...
Click to collapse
I tried to create an goldcard with this website http://psas.revskills.de/?q=goldcard but it keeps saying non valid cid. Also when I reverse the code en add zero's (0071EPADOV) like you used to be doing.
En yes there's no ruu matching 3.13.161.5 the firmware others ruu's sais my device is running.

Xacky said:
I tried to create an goldcard with this website http://psas.revskills.de/?q=goldcard but it keeps saying non valid cid. Also when I reverse the code en add zero's (0071EPADOV) like you used to be doing.
En yes there's no ruu matching 3.13.161.5 the firmware others ruu's sais my device is running.
Click to expand...
Click to collapse
ok...then you will need a golcard to flash a different RUU. I guess that you have another android working device to do it, don't you? What device is that?

glevitan said:
ok...then you will need a golcard to flash a different RUU. I guess that you have another android working device to do it, don't you? What device is that?
Click to expand...
Click to collapse
I have a Samsung Ace (S-5660)

Xacky said:
I have a Samsung Ace (S-5660)
Click to expand...
Click to collapse
umm..I don't think that samsung are good devices to create goldcards....

glevitan said:
umm..I don't think that samsung are good devices to create goldcards....
Click to expand...
Click to collapse
Creating an Goldcard can also done be Linux as far as I know. Butt the big problem is the fact that CID doesn't seem to be good according to the website I mentioned earlier.

Xacky said:
Creating an Goldcard can also done be Linux as far as I know. Butt the big problem is the fact that CID doesn't seem to be good according to the website I mentioned earlier.
Click to expand...
Click to collapse
Are you using the reversed CID?? that is the one that should be used in the REVPASS site

[Q] Error when unlocking bootloader

I have two HTC Evo 4G, and I already successfully unlocked and rooted one, and I am working on the other one. The first one I did went smoothly with no problems.
I am trying to unlock the bootloader using the instruction from htcdev.com, but I am getting an error when I go to get the identifier token:
------------
D:\HTCevo\NEW>fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.006s
D:\HTCevo\NEW>
------------
I am following the same procedure as I did before; all the files I need are in D:\HTCevo\NEW. I also attempted this on another computer and got the same error.
The phone has HBOOT version 2.16.0001 (radio version 2.15.00.0808). The phone that I already rooted has HBOOT version 2.10.0001 (radio version 2.15.00.11.19). Could the different HBOOT version be causing my problem? If so, how do I downgrade the HBOOT?
I did a fastboot getvar all: (maybe this will help with figuring out what is wrong)
------------
D:\HTCevo\NEW>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.16.0001
(bootloader) version-baseband: 2.15.00.0808
(bootloader) version-cpld: None
(bootloader) version-microp: 041f
(bootloader) version-main: 4.54.651.1
(bootloader) serialno: HT15PHL06648
(bootloader) imei: 355195000000017
(bootloader) product: supersonic
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PC3610000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3806mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: a80b8623
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.004s
----------
Any help is appreciated!

If I recall correctly you need to use Revolutionary to root your phone (will also S-off your phone), not HTC Dev. Look here:
http://revolutionary.io
Sent from my EVO using xda premium

Thanks, I'll give it a try. I was using an online guide howtoroothtcevo235withbootloader218 that worked on the other phone, so I figured it would work on the current phone until I ran into this issue.

jstluise said:
Thanks, I'll give it a try. I was using an online guide howtoroothtcevo235withbootloader218 that worked on the other phone, so I figured it would work on the current phone until I ran into this issue.
Click to expand...
Click to collapse
yeah the bootloader version makes a difference. that link that the other guy posted will help you. you could also follow that if you want to have s-off on the other phone that only has unlocked bootloader.

haxin said:
yeah the bootloader version makes a difference. that link that the other guy posted will help you. you could also follow that if you want to have s-off on the other phone that only has unlocked bootloader.
Click to expand...
Click to collapse
Sounds good, I have yet to give it a try, but I will report back when I do. As far as the other phone goes, it is s-off...unlocking the bootloader was just the initial step in the tutorial that I found.
Holy Crap! Well, that was easy! Phone is s-off and rooted in a matter of minutes. Wish I would have found Revolutionary before I did the first phone. Oh well!
Thanks guys

jstluise said:
Sounds good, I have yet to give it a try, but I will report back when I do. As far as the other phone goes, it is s-off...unlocking the bootloader was just the initial step in the tutorial that I found.
Holy Crap! Well, that was easy! Phone is s-off and rooted in a matter of minutes. Wish I would have found Revolutionary before I did the first phone. Oh well!
Thanks guys
Click to expand...
Click to collapse
Glad you got it working:thumbup:
Sent from my EVO using xda premium

Revert to stock for warranty repair 4.18

Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom

willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
I think you can use the appropriate nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 if an ruu is not available.

willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.

Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine

willmott1992 said:
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
Click to expand...
Click to collapse
I hope you are lucky too. The relocked state could be a reason not to repair under warranty

Help
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help

ryanrazer said:
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
Click to expand...
Click to collapse
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version

Thant said:
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Click to expand...
Click to collapse
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it

ryanrazer said:
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
Click to expand...
Click to collapse
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.

Thant said:
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Click to expand...
Click to collapse
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?

ryanrazer said:
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
Click to expand...
Click to collapse
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.

Thank you
Thant said:
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Click to expand...
Click to collapse
Thank you for all your help! My phone is back on stock! Thank you!

ryanrazer said:
Thank you for all your help! My phone is back on stock! Thank you!
Click to expand...
Click to collapse
No problem You go to stock only with RUU 3.14.401.31 right?

No warranty
Thant said:
No problem You go to stock only with RUU 3.14.401.31 right?
Click to expand...
Click to collapse
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/

ryanrazer said:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
Click to expand...
Click to collapse
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me

Thant said:
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Click to expand...
Click to collapse
Aha ok... i will try my luck! Thanks mate, i will report back their decision!

ryanrazer said:
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
Click to expand...
Click to collapse
Good luck from me I hope they will repair:good:

Thant said:
Good luck from me I hope they will repair:good:
Click to expand...
Click to collapse
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s

prafulk1987 said:
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
Click to expand...
Click to collapse
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28

Thant said:
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Click to expand...
Click to collapse
The utility reaches the screen where it starts copying stuff. .then gives an error 158 and tells me to find the correct update update utility. .
What am i doing wrong
I think the utility will not downgrade me from 4.19.708.1 to a 3.xx.708.xx ?? For that do we need to do a nandroid restore ? In that case can anyone point me to th one that will be applicable for me ? Since i have no clue on that. .
I just want to go back to 4.1.1 or 4.1.2 as the 4.2.2 update broke my camera focussing funtionality.

[Q] Stuck in bootloader

Hi all, first time posting here.
I've installed some custom roms whilst I've had this phone so I can follow instructions but I don't really know what I'm doing here. I was on a Sense custom rom and I was trying to revert back to stock and re-lock the bootloader. I looked through a million threads and ended up locking the bootloader - fine. Then I hit Factory Reset on the bootloader for some silly reason, now I am stuck in the bootloader and I can't seem to do anything. The battery is low now, I executed a script I found here through fastboot which seems to restart the phone repeatedly and charge it bit by bit, with the goal of running an RUU. This eventually gets just about high enough to do something if I'm quick.
I tried to run the 3.14.401.31 RUU I found from a source on xda, but it gives me "signature error [132]" after a couple of minutes when running this as admin. fastboot getvar version-main gives 3.14.401.600.
Basically I'm now completely stumped and I was wondering if anyone could provide me with some help? Happy to provide any more info if needed.
Thanks!

jacobgaudoin said:
Hi all, first time posting here.
I've installed some custom roms whilst I've had this phone so I can follow instructions but I don't really know what I'm doing here. I was on a Sense custom rom and I was trying to revert back to stock and re-lock the bootloader. I looked through a million threads and ended up locking the bootloader - fine. Then I hit Factory Reset on the bootloader for some silly reason, now I am stuck in the bootloader and I can't seem to do anything. The battery is low now, I executed a script I found here through fastboot which seems to restart the phone repeatedly and charge it bit by bit, with the goal of running an RUU. This eventually gets just about high enough to do something if I'm quick.
I tried to run the 3.14.401.31 RUU I found from a source on xda, but it gives me "signature error [132]" after a couple of minutes when running this as admin. fastboot getvar version-main gives 3.14.401.600.
Basically I'm now completely stumped and I was wondering if anyone could provide me with some help? Happy to provide any more info if needed.
Thanks!
Click to expand...
Click to collapse
post the results of "fastboot getvar all" but delete the imei and serial number before you post it

And flash custom recovery (TWRP/CWM/...) once you get to the battery state where you can flash anything. Once you have custom recovery you can charge your HOX normally.
Code:
[I]fastboot[/I] flash recovery [I]recovery.img[/I]
(change fastboot to fastboot.exe if you're on Windows and change recovery.img to the name of your preferred recovery)

@jacobgaudoin I missed something in your first post sorry, you're version is too new for the ruu you are trying to use so you cannot do it with an ruu. you will have to get a stock nandroid and do it that way. look for your cid and version number here>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 best to get the version that exactly matches yours and then flash the boot.img from the nandroid and flash the stock recovery which you can get from further down the page, once you done all of the above you will receive OTA's from htc or your carrier that will bring you up to the latest official version available for your cid. oh you must do this with an unlocked bootloader and whichever custom recovery comes with the nandroid

Thanks for all the help guys. I've managed to get back into my recovery and can boot into the rom fine now! I'm now trying the nandroid route, tried downloading the 4.18.401.2 CID HTC__001 from the collections page. I have tried restoring this but it says system restore error. I want to try the other non TWRP backup but it won't seem to download. I will keep exploring...
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.28.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.600
(bootloader) serialno: \\\\\\\\\\\\\\\\\\\\\
(bootloader) imei: \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4118mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.891s

Managed to get it all working, thanks for the help!

Hey got the same mistake wtih my hox... her my stats:
INFOversion: 0.5a
INFOversion-bootloader: 1.72.0000
INFOversion-baseband: 5.1204.164D3.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.17.161.2
INFOserialno: --------------------
INFOimei: ----------------------
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: VODAP102
INFObattery-status: good
INFObattery-voltage: 3826mV
INFOdevpower: 56
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
I unlocked the hox with hasoon 2000 all in one kit... and put the xm kernel sense 188v4 and the Android Revolution HD 31.3 from mike1986
fastboot oem rebootRUU (i typ at first fastboot oem lock) ther come a blck screen with htc logo...
after this is nothing doing...

You need to flash the boot.img from the arhd rom.zip then install the rom in recovery, oh and as you have 1.72 bootloader you should first install philz touch recovery oot you touchscreen will not work
Press thanks if I helped you. Sent via XDA Premium 4

And dont flash xm 188 it's a sense 4 kernel. Not good in combo with a sense 5 rom.
And stop flashing firmwares, not needed !