Develop Bugs

[Q] Anione help me

Hy everione, I flash my One X whit a rom (skydragon) i think, them in the start my phone restarts, and turn off and restarts and dont stop. I try to solve the problem in Recovery and becouse im noob I delete ALL in the memory, now the One X starts and stay stop in the Logo, I dont know how put another rom or do something, PLS I need help.
THXX

1-BOOTLOADER:
Open your bootloader - hold vol down and power button for 15 seconds
check that your Hboot version is less than 1.23 (1.12 or lower) and your bootloader is UNLOCKED, if not then you have to read more
flash a custom recovery(like CWM) from fastboot fastboot flash recovery C:/....recovery.img
Find your(skydragon) zip file, and you will find a boot.img file inside it, copy it to your computer
Flash the boot.img you copied to your computer fastboot flash boot C:/...boot.img
2-RECOVERY and INSTALL
go to the recovery from the bootloader, mount USB storage and place the zip on the SD
Install zip from sd, find your rom and install it
clear cache
3-Restart your device and everything should work
note: it might take time to load first time
If your bootloader is 1.23/1.28/1.31/1.33 then you might have errors after installing(but the same method will also work)

I tried that, but when I go to put usb storage says a error , I cant put nothim in the memory, i tri to instal a ruu but im not find the correct
there is a ruu that works in all??? i dont know my cid .
thxx

what error you are getting ? and type this in bootloader to know which ruu to use : fastboot getvar mainver
edit: try reflashing the latest CWM recovery

Error 155.in the ruu

what is the mainversion and your bootloader version ? type fastboot getvar all to see all your phone's info

Vcek said:
what is the mainversion and your bootloader version ? type fastboot getvar all to see all your phone's info
Click to expand...
Click to collapse
Hi Vcek, I'm facing a similar situation as well. I flashed my phone using ARHD 14.2. Found out later that it does not support my phone. Wrong CID (Yes, did not read carefully and did a noob job on it.). Found out from others that I can return back to a previous ROM which I have. Problem was that I could not mount my USB drive. Gave me message "Unable to load usm lunfiles..." something like that. So I was then advised to perform a "Fastboot flash recovery recovery.zip". Did that and got the following:
fastboot flash recovery recovery.zip
sending 'recovery' (532446 KB)... OKAY [ 72.375s]
writing 'recovery'... INFOFormat partition SOS done
FAILED (remote: (0000000a))
finished. total time: 72.602s
When I returned to the bootloader, This time round, I cannot even enter recovery mode. It just loops back to the first screen of the bootlader. Selecting HBOOT, some messages flashed saying that "Failed to open sdcard, dalvik cache, etc, etc.
I then tried to load back the latest 5.8.4.0 CWM using "fastboot flash recovery cwm 5.8.5.0,img". It gave me another error "error: cannot load 'cmw 5.8.4.0.img"
My bootloader information is as follows:
INFOversion: 0.5a
INFOversion-bootloader: 0.94.00
INFOversion-baseband: 1.1204.10
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.707.10
INFOserialno: SH23GW108459
INFOimei: 359188045101102
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4062mV
INFOdevpower: 93
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Any help will be much appreciated.

Microsoft Windows [versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Users\Usuario>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.43.0000
(bootloader) version-baseband: 1.1204.103.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.2
(bootloader) serialno: SH23JW112582
(bootloader) imei: 359188045307139
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4152mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.938s
C:\Users\Usuario>
Here the fastboot getvar all, pls how i can get my cid, i wanna know how ruu to use, pls .

renan.cauchick said:
(bootloader) version-main: 1.26.707.2
Here the fastboot getvar all, pls how i can get my cid, i wanna know how ruu to use, pls .
Click to expand...
Click to collapse
I think it's HTC__044
This command:
fastboot oem readcid
Will get it.

how i unlock the bootloader, i lock for aply ruu but i get the error 177??

My bootloader is relocked, my phone ( one x) dont have a rom, nothim.... the only thing what he do is enter in the bootloader, pls help me solve the probllem, when i put a ruu throuth the Windows say na error ( 170 ) the usb is not conected . pls Help.

[Q] HTC One X Stuck in Bootloader (BAD)

Hi im new here and would like some advice,
i have a HTC One X with CID TMOB005 (UK T-Mobile) and am stuck in a recovery loop, if you try to boot the phone normally it just gets to the beats logo and reboots, now i have tried to flash with RUU but will not recognize the phone but it can be seen running the fastboot cmd. i think its because its an old RUU im in need of;
RUU_ENDEAVOR_U_ICS_40_TMO_UK_1.29.110.11_Radio_1.1204.105.14_release_260731_signed.exe
but cant find a download stable anywhere!
Is there a way round this any help would be appreciated!
Thanks

lyncomm said:
Hi im new here and would like some advice,
i have a HTC One X with CID TMOB005 (UK T-Mobile) and am stuck in a recovery loop, if you try to boot the phone normally it just gets to the beats logo and reboots, now i have tried to flash with RUU but will not recognize the phone but it can be seen running the fastboot cmd. i think its because its an old RUU im in need of;
RUU_ENDEAVOR_U_ICS_40_TMO_UK_1.29.110.11_Radio_1.1204.105.14_release_260731_signed.exe
but cant find a download stable anywhere!
Is there a way round this any help would be appreciated!
Thanks
Click to expand...
Click to collapse
Have you flashed a custom rom?

Not as yet anything i need to flash with custom rom? and where would i obtain a custom ROM?, i have extracted the rom.zip from the Old RUU and tried to fastboot flash bit getting error code when flashing the system.img..

Put the rom.zip together with fastboot files. Then go to fastboot and type 'fastboot oem rebootRUU', then type 'fastboot flash zip rom.zip'
The RUU should flash. Just will take a few minute to send the zip and flash.
But before you do that that, check your main version by typing 'fastboot getvar all' and see the version, if it's still like 1.29 or 1.28 then you can flash the RUU.

tomascus said:
Put the rom.zip together with fastboot files. Then go to fastboot and type 'fastboot oem rebootRUU', then type 'fastboot flash zip rom.zip'
The RUU should flash. Just will take a few minute to send the zip and flash.
But before you do that that, check your main version by typing 'fastboot getvar all' and see the version, if it's still like 1.29 or 1.28 then you can flash the RUU.
Click to expand...
Click to collapse
This is what comes up what version am i looking for?
C:\Users\John\Desktop\JBFWTOOL14>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 1.1204.103.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.110.5
(bootloader) serialno: HT23YW110559
(bootloader) imei: 359188043867***
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 3758mV
(bootloader) devpower: 63
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!

C:\Users\John\Desktop\JBFWTO
...
(bootloader) Save data from
(bootloader) Update partitio
(bootloader) [MSG] OKAY
(bootloader) vendor/htc/hboo
FAILED (status read failed (
finished. total time: 9.018s

Your on 2.17 so you need the 2.17 ruu as you can't use a lower ruu than what your on now
Sent from my HTC One X using xda premium

can i use any 2.17 ruu? or does it have to be tmobile one?

lyncomm said:
can i use any 2.17 ruu? or does it have to be tmobile one?
Click to expand...
Click to collapse
Has to be t mobile ....

MarcelHofs said:
Has to be t mobile ....
Click to expand...
Click to collapse
I have searched the whole internet and cant find one anywhere, iv been searching for ages! anyone know where i could find this?
CID: TMOB005
BL: 2.17.110.5

Still having same problem! anyone else think they got a solution?

You could always try unlocking via htc dev then flash custom recovery and a custom rom.

Yeah, since your RUU is impossible to find, you must flash a custom ROM and it'll be all good, but you won't be able to return to stock eternally, until someone uploads their stock nanodroid backup or a RUU is leaked somewhere.

I don't understand, how are you in a bootloop if you haven't unlocked it?
Have you tried factory reset?

If you're still looking for RUU_ENDEAVOR_U_ICS_40_TMO_UK_1.29.110.11_Radio_1.1204.105.14_release_260731_signed then here's the link
http://forum.xda-developers.com/showthread.php?t=1543604&page=192
Scroll down to post #1917
Also here's a nandroid backup of 2.17.110.5.
CID TMOB005
http://forum.xda-developers.com/showthread.php?t=1960826&page=2

Revert to stock for warranty repair 4.18

Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom

willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
I think you can use the appropriate nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 if an ruu is not available.

willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.

Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine

willmott1992 said:
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
Click to expand...
Click to collapse
I hope you are lucky too. The relocked state could be a reason not to repair under warranty

Help
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help

ryanrazer said:
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
Click to expand...
Click to collapse
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version

Thant said:
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Click to expand...
Click to collapse
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it

ryanrazer said:
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
Click to expand...
Click to collapse
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.

Thant said:
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Click to expand...
Click to collapse
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?

ryanrazer said:
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
Click to expand...
Click to collapse
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.

Thank you
Thant said:
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Click to expand...
Click to collapse
Thank you for all your help! My phone is back on stock! Thank you!

ryanrazer said:
Thank you for all your help! My phone is back on stock! Thank you!
Click to expand...
Click to collapse
No problem You go to stock only with RUU 3.14.401.31 right?

No warranty
Thant said:
No problem You go to stock only with RUU 3.14.401.31 right?
Click to expand...
Click to collapse
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/

ryanrazer said:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
Click to expand...
Click to collapse
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me

Thant said:
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Click to expand...
Click to collapse
Aha ok... i will try my luck! Thanks mate, i will report back their decision!

ryanrazer said:
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
Click to expand...
Click to collapse
Good luck from me I hope they will repair:good:

Thant said:
Good luck from me I hope they will repair:good:
Click to expand...
Click to collapse
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s

prafulk1987 said:
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
Click to expand...
Click to collapse
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28

Thant said:
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Click to expand...
Click to collapse
The utility reaches the screen where it starts copying stuff. .then gives an error 158 and tells me to find the correct update update utility. .
What am i doing wrong
I think the utility will not downgrade me from 4.19.708.1 to a 3.xx.708.xx ?? For that do we need to do a nandroid restore ? In that case can anyone point me to th one that will be applicable for me ? Since i have no clue on that. .
I just want to go back to 4.1.1 or 4.1.2 as the 4.2.2 update broke my camera focussing funtionality.

[Q]HTC One X - boot loop

On the beginning i wanted to say hello to every one on forum,
and apologise for my english and for noobie question
i've got a little problem with my new phone, it comes from Asia.
after two days of usage i've tryed to do android update (offical)
but after install it start showing HTC logo, and after 2-3sec restart.
i've tryied factory reset but it doesn't help.
my brother try to help me, he flashed recovery, (maybe also boot), unlock bootloader, and try install rom from SDcard but without success. (he probably also change CID to SuperCID
i've also try ti fix it,
here is my vars from fastboot:
version: 0.5a
version-bootloader: 1.12.0000
version-baseband: 2.1204.135.20
version-cpld: None
version-microp: None
version-main: 2.17.707.3
serialno: **********
imei: **********
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__044
battery-status: good
battery-voltage: 3882mV
devpower: 87
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
all: Done!
finished. total time: 0.880s
based on version-main: 2.17.707.3 i've change CID to HTC__044
locked my oem, and found this one:
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
after itstall it say: Completed, and you can use your phone, but after reboot it still doing reboots after 2-3sec.
wanted also to find original boot.img or nandroid backup but all link don't work.
Thank you for all hints and ideas

You're in the wrong forum, this is the HTC One XL forum. You need to ask in the HTC One X forum.
Sent from my Evita

@knuckels your post is now in the correct section.

Here you will find the lastest RUU and also instructions..
http://forum.xda-developers.com/showthread.php?t=1957376
(a few seconds of googleing)

knuckels said:
On the beginning i wanted to say hello to every one on forum,
and apologise for my english and for noobie question
i've got a little problem with my new phone, it comes from Asia.
after two days of usage i've tryed to do android update (offical)
but after install it start showing HTC logo, and after 2-3sec restart.
i've tryied factory reset but it doesn't help.
my brother try to help me, he flashed recovery, (maybe also boot), unlock bootloader, and try install rom from SDcard but without success. (he probably also change CID to SuperCID
i've also try ti fix it,
here is my vars from fastboot:
version: 0.5a
version-bootloader: 1.12.0000
version-baseband: 2.1204.135.20
version-cpld: None
version-microp: None
version-main: 2.17.707.3
serialno: ***************
imei: **************
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__044
battery-status: good
battery-voltage: 3882mV
devpower: 87
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
all: Done!
finished. total time: 0.880s
based on version-main: 2.17.707.3 i've change CID to HTC__044
locked my oem, and found this one:
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
after itstall it say: Completed, and you can use your phone, but after reboot it still doing reboots after 2-3sec.
wanted also to find original boot.img or nandroid backup but all link don't work.
Thank you for all hints and ideas
Click to expand...
Click to collapse
OK you are S-Off you can install what you whont download RUU lock the bootloader with the command fastboot oem lock and run the RUU as administrator
PS: Delete your S/N and IMEI from the first postand please check what is writen in your bootloader up Endeavoru XE or Endeavoru PVT

Thank both You
Problem Solved.

Soft Bricked the HTC One M8

HTC One M8
Unlocked and S-off
From UK so with international network
Cyanogenmod 11 i think
Clockwork recovery
Soooo i bought the M8 secondhand with Cyanogenmod installed, however, i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail. since then the error came back and i managed to get a different error on reboot: "root access possibly lost. fix?". I've cleared cache(s) and done a factory reset. No matter what i pressed it would be in a boot loop. I can still get to bootloader and recovery. then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
sorry for sounding very vague / idiotic, i have no idea what i have done and no idea what i am doing to try and fix it. that means sadly i will need to be spoonfed the fix. if you need any more details or pictures of the problem let me know
thanks in advance

josborn42 said:
i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail.
Click to expand...
Click to collapse
Are you trying to update to CM12.1? If so, the error is for a reason, and not to be bypassed in the way you describe.
If you are on an hboot older than 3.19, I don't think it will work with CM12 and 12.1. You'll need to update hboot (and rest of firmware, preferably) to proceed.
Also, CWM may be too old for CM12 as well.
josborn42 said:
then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
Click to expand...
Click to collapse
Not sure what you mean here. Are you trying to install HTC Sync (and corresponding driver) by connecting the phone?
You can just do an XDA search for "simple adb" and you will find a couple really easy adb/fastboot installers.

how do i see what hboot i am on? and how would i update it?
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone) and i've installed a simple ADB/fastboot but i can't see the driver option when trying to add it to my phone on Device manager. i have got to the stage whereby i have the ADB/fastboot folder and have the TWRP file in the same folder, just i cant get any further.
where would i begin getting to cyanogenmod 12.1, or would it be easier to revert back to a basic android os?
i know this is probably incredibly frustrating for you as i am a complete novice, but i greatly appreciate your help
i would post pictures to help but i cant as im a new member, i will when i can

josborn42 said:
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone)
Click to expand...
Click to collapse
This in itself does not mean the phone is not connecting by fastboot. And fastboot is the important thing here, so we can update TWRP, etc.
Try rebooting into fastboot mode, and try the command and see if your phone's ID is returned: fastboot devices
If you don't get the phone's ID and just "waiting for device" you do indeed have some type of USB connectivity problem.
josborn42 said:
how do i see what hboot i am on? and how would i update it?
Click to expand...
Click to collapse
Boot into bootloader, andyour hboot number is listed near the top of the screen.
Since you are s-off, its fairly easy to update the firmware (and I would suggest to update all the firmware, not just hboot) by flashing the proper firmware.zip. But let's determine whether that is even the problem, before we worry about flashing firmwares.

hboot is: 3.16.0
also my phone is detected by my laptop so all is well there
i have installed a simple 15 second ADB file but am unsure how to proceed from here

josborn42 said:
hboot is: 3.16.0
Click to expand...
Click to collapse
Your firmware is very old, so will need to be updated to run CM12.1. Also, newer versions of TWRP will not run with your old hboot.
Do a fastboot getvar all, and post the output, but delete your IMEI and serial numbers (as these are private info). Need more details on the phone (particularly CID) in order to know how to proceed.

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s

josborn42 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s
Click to expand...
Click to collapse
I'm going to suggest WWE/International firmware. The updates are available way before O2 updates.
Download this firmware (it also includes TWRP2.8.4.0). Rename it to firmware.zip and place it into your fastboot folder.
Next, boot into fastboot and change your CID to superCID (it won't flash with the O2 CID)
fastboot devices to make sure you are connected (a bunch of letters and numbers/your serial# means you are)
fastboot oem rebootRUU (a black screen with the HTC logo means you are in RUU mode)
fastboot oem writecid 11111111 (eight ones) You are now superCID!
Now flash the firmware
fastboot flash zip firmware.zip
If you get "error 90 hboot pre-update" (and you probably will with how old your current firmware is) run the same command again and the firmware will flash properly. The first run only updated your hboot.
The process will stop at 75% to 90%. That's normal and gives you a chance to check your console output. The last few percentage is the reboot.
The bar will fill to 100% after you enter fastboot reboot-bootloader
That's it. Good luck!

thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?

josborn42 said:
thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?
Click to expand...
Click to collapse
Yes. But there are more ROMs out there as well. Try them out and find the one that suits your needs best.

hi there i have htc one m8 rooted s-on & software status is modified
i got a new update so i flashed the stock recovery then downloaded the update and pressed install
it was loading the update and suddenly the screen frozen on the htc ONE screen without responding
i tried the volume down + power button nothing happened then i tried volume up + power button
it reboots and freezes on the same screen - tried to remove the sim & sd card but nothing happened
what should i do plz ???
cid : htc_j15
build number : 4.16.401.10