Related
The last screen I saw was an android out of the box. I pulled the battery and now my device refuses to turn on. Bricked?
Also, if I send the device back to Sprint and claim that the OTA did this, will they know I was messing with root and roms? And how can I prevent this?
psychopsilocin said:
Also, if I send the device back to Sprint and claim that the OTA did this, will they know I was messing with root and roms? And how can I prevent this?
Click to expand...
Click to collapse
what exactly were you doing that led to this "bricking"?
Android out of the box that sounds like it was writting the radio if the battery was pulled that's a really bad thing
Sent from my PC36100 using XDA App
I flashed Fresh's 0.5.3 along with the new radio and noob's JIT patch all in one shot. Rebooted, hung at the Android out of the box. And I battery pulled.
I called Sprint and they told me to take it down to a service center. I'm looking through my microSD from remnants of rooting and flashing. Do you think they can salvage what's on the system ROM?
psychopsilocin said:
I flashed Fresh's 0.5.3 along with the new radio and noob's JIT patch all in one shot. Rebooted, hung at the Android out of the box. And I battery pulled.
I called Sprint and they told me to take it down to a service center. I'm looking through my microSD from remnants of rooting and flashing. Do you think they can salvage what's on the system ROM?
Click to expand...
Click to collapse
oh wow.. dude, that's a bit of a big bite. pulling the battery may have been the cause.
what sprint is most likely going to do is boot into the bootloader and wipe user data (hard reset). you can pull the "the ota update killed it" reason (as i told them before i got mine to start working again). you can't turn it on at all??
Refuses to power on or boot?
Power: does it charge? Or indicate that it does?
Keep holding power while putting in battery.
Connect usb cable with battery out of the phone.
Boot: hold vol down + power together to boot into boot.
Sent from my PC36100 using XDA App
It refuses to power on. I've tried all of the above.
psychopsilocin said:
It refuses to power on. I've tried all of the above.
Click to expand...
Click to collapse
if you plug it in the usb, is there a light to show that it's charging?
No LED light to indicate that it's charging. Not even the slightest hint that it's still alive. If I could've gotten to the bootloader all would've been well.
I'm worried that when I bring it to Sprint, they'll salvage what's on the ROM and realize that I've been rooting and flashing. I hope the ROM is unreadable. Maybe that's the reason why it won't turn on.
psychopsilocin said:
No LED light to indicate that it's charging. Not even the slightest hint that it's still alive. If I could've gotten to the bootloader all would've been well.
I'm worried that when I bring it to Sprint, they'll salvage what's on the ROM and realize that I've been rooting and flashing. I hope the ROM is unreadable. Maybe that's the reason why it won't turn on.
Click to expand...
Click to collapse
yea, it does sound like it. just to give you a heads up though, evos are pretty sold out everywhere. i went to the corporate store here in nj and i called them up as well, no dice. they are sold out.
I'll wait as long as I get a free replacement
EDIT: Back to my dreaded Samsung Instinct.
this just happened to me.
did op get an ETA on a new phone?
I called Sprint tech support and they told me to bring it in to a Sprint Service Repair store (Use the store locator and find one that repairs). I told them the update did it. Luckily, they had a replacement in stock. They took it out of a refurbished looking box, but it seems to be brand new . I hate to cheat the system and I sort of feel guilty about it. But that guilt is overridden by the fact that I have a brand new Evo in my hands .
hello all,
let me first say how much i have really appreciated all that i have learned by reading the forums here. I have enjoyed learning about how to customize my epic experience, but i fear i have made a ghastly mistake.
i was reading the thread about how to make an odin tar file as a means of backing up my current setup (which is srf 1.1.0, genocide kerenel 1.0, and erebos port theme) and thought i might try odin to see if it would work to write that tar back to the phone. well now i believe i am staring at a brick. it will not boot even to dl mode. no lights appear when attempting to charge. i have pulled the battery and even swapped in a fresh battery. any advice or help is appreciated.
Maybe using a different usb cord while having your phone (without battery) plugged into a computer/laptop might help.
Yes, try another cable with the battery out, plug into the computer and try to attain download mode. If that works you can pop the fully charged battery in.
You can also try the magic button that may or may not exist inside the back next to the camera lens.
tried a different usb cable with battery out. no luck. saw a thread a few days ago about the "magic button" so i tried that. no sure i did it right. still no life of any kind in my phone. looks like i bricked it good.
sorry, for your brick : (
But I'm sure you can get a replacement phone if you say you were trying update your firmware via update.zip and your phone dropped by accident leaving it as an result of what it is now
jarcher1971 said:
tried a different usb cable with battery out. no luck. saw a thread a few days ago about the "magic button" so i tried that. no sure i did it right. still no life of any kind in my phone. looks like i bricked it good.
Click to expand...
Click to collapse
I saw the hole (pinsize) next to the camera lens. I was wondering if this was more of a circuit breaker type reset that only works if it pops. Or that some phones have nothing there depending on board revisions.
The good news is Sprint will probably replace it for free. It should still be under warranty.
kennyglass123 said:
The good news is Sprint will probably replace it for free. It should still be under warranty.
Click to expand...
Click to collapse
what is the best way to get that done. since i messed the phone up with a non-compatible tar?
jarcher1971 said:
what is the best way to get that done. since i messed the phone up with a non-compatible tar?
Click to expand...
Click to collapse
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
thanks for the help kennyglass i will be trying that soon.
jarcher1971 said:
thanks for the help kennyglass i will be trying that soon.
Click to expand...
Click to collapse
You are welcome, and I am sorry for your loss. Hopefully you have a recent backup on your sd card.
since i seem to be a "flash-a-holic" always trying some new tweak i do the nandroid backup thing like every other day. so with a new phone i should be up and running again soon.
well, looks like i will be getting a new epic, under warranty thankfully -- store tech says that the usb port and a battery connector look bad. but they are out of stock on the phone and the replacement will not be in for 3-5 days. so for now i have to go back to my old webOS phone. man i already miss my epic. guess i'm jonesin' for a flash. maybe i'll head over to the webOS forums and see what they've got.
jarcher1971 said:
well, looks like i will be getting a new epic, under warranty thankfully -- store tech says that the usb port and a battery connector look bad. but they are out of stock on the phone and the replacement will not be in for 3-5 days. so for now i have to go back to my old webOS phone. man i already miss my epic. guess i'm jonesin' for a flash. maybe i'll head over to the webOS forums and see what they've got.
Click to expand...
Click to collapse
HAHA. I still have my Palm Pre for a backup and saw somewhere that somebody was able to put Android on it.
cool!! might have to look that up!
@jarcher1971, I have unfortunately bricked my device as well (story here: http://forum.xda-developers.com/showthread.php?t=1090822) and I was wondering, what exactly did you tell the repair tech?
I'm planning to go with the story that it was working fine and then at one point it just wouldn't turn on. Maybe I should include it was after taking the phone off the charger?
Thanks, any help is appreciated!
Yeah, I listed all that a few posts back in this thread.
Here:
kennyglass123 said:
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
Click to expand...
Click to collapse
Was like 6 posts back
kennyglass123 said:
Here:
Originally Posted by kennyglass123
Go to the store and tell them it was off this morning when you pulled it off charge and it won't turn on. They will play with for an hour to try to get it to turn on then depending on the store give you a refurb or get one sent to you in a day or two.
Was like 6 posts back
Click to expand...
Click to collapse
yep that was about how it went at the store too
I know there must be somewhere in the thread but i can't find one with the same problem as mine. I was in middle of odin to put my phone back to stock. and it was stuck for over a half hr at the same place. so i unplugged it and tried to put it back on but it wont go the only thing that turns on is the blue light. i already tried the jig. its a no go. how can i unbrick this phone?
My phone has shut itself off then when i try to turn it back on i get nothing but a blue light what worked for me was taking the battery out for a couple minutes then trying it again. Have you tried that?
Sent from my SPH-D710 using XDA App
That happened to me when the phone first came out. Only a blue light came on and nothing else. Even the jig didn't work. I ended up just selling it and buying a new one. I hope someone has figured out a way to fix it for you
Sent from my SPH-D710 using XDA App
You have hard bricked your phone most likely. Like it was said, you can try to remove the battery for a few minutes to see if resetting the capacitors will fix it but I am ninety nine percent sure that it will not work. You have two options.
1) Play dumb at a sprint store
2) JTAG repair from mobiletechvideos
What you have done is flashed over the bootloader so you can no longer boot it or plug it into the computer. Can you post a link to the file that you flashed? My guess is that you flashed an i9000 tar and PIT which is not compatible with the E4GT. Not all Galaxy S2 phones are the same. In fact, they are all different.
iSkylla said:
You have hard bricked your phone most likely. Like it was said, you can try to remove the battery for a few minutes to see if resetting the capacitors will fix it but I am ninety nine percent sure that it will not work. You have two options.
1) Play dumb at a sprint store
2) JTAG repair from mobiletechvideos
What you have done is flashed over the bootloader so you can no longer boot it or plug it into the computer. Can you post a link to the file that you flashed? My guess is that you flashed an i9000 tar and PIT which is not compatible with the E4GT. Not all Galaxy S2 phones are the same. In fact, they are all different.
Click to expand...
Click to collapse
I did the exact same thing when I first rooted my phone but by the grace of god odin still recognized it so I was able to flash back to stock.
iSkylla said:
You have hard bricked your phone most likely. Like it was said, you can try to remove the battery for a few minutes to see if resetting the capacitors will fix it but I am ninety nine percent sure that it will not work. You have two options.
1) Play dumb at a sprint store
2) JTAG repair from mobiletechvideos
What you have done is flashed over the bootloader so you can no longer boot it or plug it into the computer. Can you post a link to the file that you flashed? My guess is that you flashed an i9000 tar and PIT which is not compatible with the E4GT. Not all Galaxy S2 phones are the same. In fact, they are all different.
Click to expand...
Click to collapse
That my friend is exactly right. Your cell is gone... Swap or jtag is your only options.
I am going to give the, "taking the battery out for a couple of min", a shot... I was afraid that those two were my last options. The phone is maybe 2 months old and I am not with sprint anymore. Is there a way to claim through warranty or something?
kmoshkovich said:
I am going to give the, "taking the battery out for a couple of min", a shot... I was afraid that those two were my last options. The phone is maybe 2 months old and I am not with sprint anymore. Is there a way to claim through warranty or something?
Click to expand...
Click to collapse
Good question... I do believe that there is a one year manufacturer warranty, but don't know how you would go about making a claim. I would definitely recommend the jtag service its only like $50. Even sprint would charge you $35 to swap if you were still with the m. So if you look at out that way $15 more ain't so bad.
Sent from my SPH-D710 using XDA Premium App
Remove battery. Replace. Plug into charger. Does the batt charging screen come on? If so hold power until it boots. Done. Do your happy dance.. If no charge indication = brick.
The batt recharge didnt come on ill see if i can somehow claim by samsung if not then ill have to send it in to jtag
kmoshkovich said:
The batt recharge didnt come on ill see if i can somehow claim by samsung if not then ill have to send it in to jtag
Click to expand...
Click to collapse
Dude that's a bummer. Good luck. Hwy keep us updated on how it turns out.
This same thing happened to me!
What did you end up doing?
This happened to me too, but after flashing gunslinger kernel. I did a battery pull, then it let me boot into recovery.
Sent from my SPH-D710 using xda premium
same thing happened to me, went back to best buy where i got it and said "i dont know what happened", got a new one on the spot.
On top of it, when i got it at best buy they price matched amazon mobile, so i got it for 130
I Also bought it from Best Buy! But it was two months ago... You think i can still do it by them?
After an hour of searching forums I had realized that the phone was dead and wasn't coming back on. I too had the same blue light problem, couldn't get into recovery, couldn't do anything with the black screen. I took it to Sprint, and they don't have the capability of turning it back on in store. I believe this needs to be done by Samsung, and I imagine Best Buy wouldn't be able to either. The tech told me if he could not repair it, it would be replaced. My concern was the ship time and getting a refurbished unit. He told me because the phone was so new they are almost always replaced with a new unit. He said it was $35 because I didn't have insurance, but to "Come back after an hour, and if I can't fix it and it is insured it will be replaced free of charge." I went home, had Sprint add insurance, went back to the store a couple hours later. They swapped out my unit for a brand new one, free of charge, in about 5 minutes, activated and all. I was very pleased with how everything went as I was PISSED at myself for bricking my phone so bad! In all my years of hacking Palm Pres and Evos I never bricked a phone so bad that it couldn't be powered back on! But now I have a new GS2 (ROOTED )!
I recommend just trying a Sprint Repair Center. I bought mine over the phone. I played dumb and said that I let it die completely, which I rarely do, and when I charged it the blue light went on and it never powered back up. They said that was weird but gave no qualm about it. Hope this helps..
Got a new rom yesterday. Was working fine, phone was charging fine. Today After using the phone for about 10 hours it just died. I didn't do anything new such as download any new apks or flash any thing. But it just died. When I hold power it can go to the samsung screen and just die, when I hold power vol down and home it goes to the download screen for like 5 sec and dies, when I go to cwm it dies in a short time as well.
Now I have it wall charging and I'm getting no LED light, so I'm worried!!!
Any recommendations?
ihugyou said:
Got a new rom yesterday. Was working fine, phone was charging fine. Today After using the phone for about 10 hours it just died. I didn't do anything new such as download any new apks or flash any thing. But it just died. When I hold power it can go to the samsung screen and just die, when I hold power vol down and home it goes to the download screen for like 5 sec and dies, when I go to cwm it dies in a short time as well.
Now I have it wall charging and I'm getting no LED light, so I'm worried!!!
Any recommendations?
Click to expand...
Click to collapse
Depending on what rom. Some don't play well with the led. Also you have to make sure it's checked in the settings.
Have you tried turning it on while it's charging?
Sent from a planet far far away.
Speedin07si said:
Depending on what rom. Some don't play well with the led. Also you have to make sure it's checked in the settings.
Have you tried turning it on while it's charging?
Sent from a planet far far away.
Click to expand...
Click to collapse
Some times it turns on while charging, but will just turn back off.
I'm using This Rom
Edit* the led normally turns on while charging...im not that much of a newb, i'm just thinking I might have bricked my phone.. It's strange that it happened a whole day after I flashed the rom though..
ihugyou said:
Some times it turns on while charging, but will just turn back off.
I'm using This Rom
Edit* the led normally turns on while charging...im not that much of a newb, i'm just thinking I might have bricked my phone.. It's strange that it happened a whole day after I flashed the rom though..
Click to expand...
Click to collapse
If it's turning on its not bricked at all. It's a charging issue, take the back cover off make sure the battery is making good contact with its connection points. Close it back up and plug it in and let it charge for 30 tp 40 minutes check if it comes on. Sometimes when the battery dies completely it takes some time to get some charge into it. The booting up process uses a ton of power, once on make sure you leave it plugged in and charge fully.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Ok because the one time it actually came on it said it was at 70%, which I'm assuming is totally incorrect. So I will now plug it into the wall and let it charge for quite a while, I jsut think it's weird that the light never comes on (which it normally does).....
thanks for the tips dudes!
I had the same issue as you, the phone will turn on and then most of the time it will turn off during the boot process. If I turn it on in Download or Recovery mode it'll stay on for a couple seconds and then turn off. At best, it'll turn on, get to the home screen and then after a couple seconds of usage it'll turn right back off. Also, did you notice that before the phone turned off it would lock itself and unlock itself possibly showing the power menu to like reboot or turn off and such? That made me think it might've been the power button but I'm not positive.
I could not get a fix for this at all, I attempted everything I could think of. I ran the phone in safe mode, it still did it. I ran a different rom, still had the issue. Ran stock rooted, same problem. Ran stock non-rooted, problem still there. In fact, I talked to Samsung yesterday and I sent it in for the warranty as I didn't have carrier insurance. One thing happened was that while I was in stock rooted, I decided to underclock the phone to see if anything would occur and I noticed something interesting. The phone still had the problem but it would stay on for longer periods of time. This made me think maybe the phone was overheating or the CPU was shutting itself off for some reason. As far as I know from my testing I can say that the problem was hardware related. I should also note that this thing happened to me once a couple months ago but I flashed the stock tar through Odin and the problem disappeared for a short while but it came back and continually did so.
Oh, I also figured out how to get it on for a short period of time. To get it to work temporarily, first make sure the phone is charged a good amount. Plug it in for a couple hours. Next, take the battery out of the phone for a couple hours and remove the phone from the charger, the longer you keep the battery out the better. Now, put the battery back in, and attempt to turn on the phone, if it doesn't work try again a couple times. The phone should eventually turn on and stay on for a short period of time (anywhere between 1 or 2 min and 30 minutes). From here just back up anything you need to and if you are rooted and want to turn it in for warranty or whatnot you'll need to clear the evidence that the phone was rooted.
First off, if you are rooted you'll want to clear your flash counter. Download the Triangle Away apk and put it in the microSD so you can access it easily when the phone turns on. Follow the instructions on how to turn the phone on from above. After it turns on, quickly Run Triangle away and click on the option that says something along the lines of "reset flash counter". Once that is done, turn off the phone and take out the battery so that you can turn it on for the next step.
Next, you will need to download Odin (I believe it is Windows only, if you don't have Windows I'm not sure what you can do as I haven't had to unroot on anything other than my PC) and the stock tar file so that you can return the phone to complete stock. Once you have done this, run Odin and click on the PDA tab and browse for the stock tar. Let Odin do it's thing and once you see it's ready to flash the file, put the battery back in and turn the phone back on in download mode. Plug the phone in and let it sit there for a couple seconds to make sure it won't turn off during the flashing process. If it does turn off try again. When you can get it to stay on for over 30 seconds click on the Start in Odin and start the flash. If it stays on for a while but turns off while flashing, the boot will be corrupt and you will have to try again til you can get it to stay on long enough. Note that if the boot is corrupt you won't be able to turn the phone on to anything other than Download mode and possibly recovery. Once you complete the flashing process the phone should auto-boot and it SHOULD work. That means that the phone should turn on with no problems but it may or may not turn itself off. If it doesn't turn itself off go ahead and use it for a while, but if your situation is like mine the problem will come back eventually. But at least now you can turn it in to Samsung for warranty or whatnot.
And if worst comes to worst you can completely f up the phone while it's flashing in Odin, have a corrupt boot img and then call in saying it doesn't work.
Of course all of this is only if you're having a similar problem to me. Like I said, I sent it in yesterday so I'll post updates as I get them. Hopefully they'll fix it for me!
Nice write-up :good:
@OP If you can't get the unroot process to work (like the guy above me said) just flash a rom made for the international S3, thats a sure-fire way to brick you phone
Sent from my PG06100
CNexus said:
Nice write-up :good:
@OP If you can't get the unroot process to work (like the guy above me said) just flash a rom made for the international S3, thats a sure-fire way to brick you phone
Sent from my PG06100
Click to expand...
Click to collapse
It was quite a nice wall of text. And oh yes, bricking your phone is a great idea! Say it was an OTA or something haha
Ok so SG3 should have a warranty even though I don't have carrier insurance?
And did you try replacing the battery?
ihugyou said:
Ok so SG3 should have a warranty even though I don't have carrier insurance?
And did you try replacing the battery?
Click to expand...
Click to collapse
Correct, there is a 1 year warranty on the phone and 6 months on the battery and charger. And yes I switched with another OEM battery and the issue persisted. However, the S3 I switched the batteries with continued to work so I believe it is the phone itself and not the battery or charger. It might be the connector points but my phone did strange things before turning off. It may be a combination of many things as well.
porshce2 said:
Correct, there is a 1 year warranty on the phone and 6 months on the battery and charger. And yes I switched with another OEM battery and the issue persisted. However, the S3 I switched the batteries with continued to work so I believe it is the phone itself and not the battery or charger. It might be the connector points but my phone did strange things before turning off. It may be a combination of many things as well.
Click to expand...
Click to collapse
Where exactly did you take your phone to return it? The samsung people are giving me a hard time it seems.
ihugyou said:
Where exactly did you take your phone to return it? The samsung people are giving me a hard time it seems.
Click to expand...
Click to collapse
I requested a Repair Service. You can contact them at 1-888-987-4357 and request the service there. They'll send you a UPS label and give you an RMA number. I tried to do it through the site but it didn't work so your best bet is to call them there. It's very simple to do it if your phone is already registered. Otherwise you'll have to give them the HEX number I believe. It's under your battery so just have that ready.
porshce2 said:
I requested a Repair Service. You can contact them at 1-888-987-4357 and request the service there. They'll send you a UPS label and give you an RMA number. I tried to do it through the site but it didn't work so your best bet is to call them there. It's very simple to do it if your phone is already registered. Otherwise you'll have to give them the HEX number I believe. It's under your battery so just have that ready.
Click to expand...
Click to collapse
Ok currently i have my phone running amazingly, re rooted, and installed moar morphology, I'm gonna give this some time and see what happens.. if it dies again i'm bricking it for good and returning it.
I really appreciate your help!
ihugyou said:
Ok currently i have my phone running amazingly, re rooted, and installed moar morphology, I'm gonna give this some time and see what happens.. if it dies again i'm bricking it for good and returning it.
I really appreciate your help!
Click to expand...
Click to collapse
Well if it does happen again, don't brick it unless you can't get it to turn on for long enough to flash stock. Hopefully it'll still be under warranty if it does happen again. And no problem! Good luck!:good:
porshce2 said:
Well if it does happen again, don't brick it unless you can't get it to turn on for long enough to flash stock. Hopefully it'll still be under warranty if it does happen again. And no problem! Good luck!:good:
Click to expand...
Click to collapse
This phone is giving me some epic ****in stress, can't load a rom, can revert to stock, but how boring is that... i've tried flashing at least 3 roms so far, this is taking forever, it just sits at the samsung galaxy screen now or reboots to recovery lol wtf ****ing phone
ihugyou said:
This phone is giving me some epic ****in stress, can't load a rom, can revert to stock, but how boring is that... i've tried flashing at least 3 roms so far, this is taking forever, it just sits at the samsung galaxy screen now or reboots to recovery lol wtf ****ing phone
Click to expand...
Click to collapse
If think you need to take a deep breath and relax. Try doing some more reading, it sounds like your missing a step somewhere. There's something which may be insignificant but your missing it.
Transmitted with a portable device using Xparent Blue Tapatalk 2
i got a samsung gs3 yesterday, i loved everything but battery life, lastnight i used George Holtz's "towel root" and rooted my phone, added super user and rom toolbox, upgraded my recovery to clockwork mod basic, and proceded to flash to "flashingdroid version 2.2" it went thru everything and installed the rom, when it tried to reboot, it went black... now it does nothing, computer tries to recognize it, abut i cant get it to download mode, and i cant get it into recovery mode... it does not show charge picture when plugged in and if i take the battery out, plug it in, then insert the battery i get a red light... PLEASE HELP!!!!!!!
noobbrokes3 said:
i got a samsung gs3 yesterday, i loved everything but battery life, lastnight i used George Holtz's "towel root" and rooted my phone, added super user and rom toolbox, upgraded my recovery to clockwork mod basic, and proceded to flash to "flashingdroid version 2.2" it went thru everything and installed the rom, when it tried to reboot, it went black... now it does nothing, computer tries to recognize it, abut i cant get it to download mode, and i cant get it into recovery mode... it does not show charge picture when plugged in and if i take the battery out, plug it in, then insert the battery i get a red light... PLEASE HELP!!!!!!!
Click to expand...
Click to collapse
What model is your phone? You flashed a i9300 ROM, this is the sub-forum for the i747.
its the i747, i before looking today never knew there were more than 1 model of the GS3, is it possible to fix it?
This may help:
http://forum.xda-developers.com/showthread.php?t=2549068
audit13 said:
This may help:
http://forum.xda-developers.com/showthread.php?t=2549068
Click to expand...
Click to collapse
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
noobbrokes3 said:
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
Click to expand...
Click to collapse
It could be a board failure but it happened right after you flashed the ROM which leads me to believe it is software related.
A dongle is not going to help since the phone won't even power up. A jtag service would be your best and quickest option. You should try and find a shop that will guarantee to revive the phone or you pay nothing.
This might help with your current phone: http://www.xda-developers.com/android/how-to-make-your-verizon-galaxy-s-iii-a-world-phone/
noobbrokes3 said:
my problem is my phone does NOT vibrate when power button is pressed, it isnt doing ANYTHING at ALL, the red charging light only comes on when battery is left out and the phone is plugged in, light turns off after a minute or so of the battery being installed, to me it seems like less rom flash related, and more failure in the board, but im not good at this stuff so im probably wrong, i bought a verizon one (i535) for 50 bucks (pretty banged up touchscreen is cracked in several places i got it without a back cover,but it works,) to get me by but i miss my 4g on straight talk =( i wish i had just left it alone, it was clean just 1 crack in the touch screen wires ans such for lcdanddigitizer got cut by accient while trying to modify midframe for verizon board, i sure as hell cant afford the att version for a while 150-260 for a decent i747, is it possible that a JTAG service would be able to bring it to life or even one of those dongles to force recovery?
Click to expand...
Click to collapse
Flashing an i9300 rom is guaranteed to hard brick the device and cause exactly what you described. If you follow the instructions in the thread linked in an above post it probably has a 90% chance of fixing it.
I am 99% certain it is not a hardware failure. Others have done the exact same thing and were able to fix it by using the instructions in that thread.
audit13 said:
It could be a board failure but it happened right after you flashed the ROM which leads me to believe it is software related.
A dongle is not going to help since the phone won't even power up. A jtag service would be your best and quickest option. You should try and find a shop that will guarantee to revive the phone or you pay nothing.
This might help with your current phone: http://www.xda-developers.com/android/how-to-make-your-verizon-galaxy-s-iii-a-world-phone/
Click to expand...
Click to collapse
i found one on ebay, full refund short of a 5 dollar shipping cost for return shipping, once i have money that i can spend ill sure as hell be giving it a shot
Or you can attempt to fix it for free.....but I suppose that is up to you.
DocHoliday77 said:
Or you can attempt to fix it for free.....but I suppose that is up to you.
Click to expand...
Click to collapse
either way its gonna cost me a little cash, i dont have a 16 gig sd card, forgive me for being so noob but the sd card trick CAN work for my case?? i know for a fact i cant do anythingto my phone right now as it wont even power on, but if you BELIEVE it will work ill gove it a try
Unless you updated with the kk ota, you are probably on 4.3 firmware. I cannot guarantee it will work, but I believe the chances are pretty good that it will.
Just remember, if it doesn't work, dont give up on the first try. Many have had to run through the process several times before it would actually boot up again.
The only other tip I can think to give is to make sure you buy a decent sd card. It doesn't have to be top of the line, but there are tons of fake ones out there that would be less likely to work. If you can, try to buy one from an authorized dealer for whatever brand you are considering. This greatly reduces the chance of getting a bad card.
DocHoliday77 said:
Unless you updated with the kk ota, you are probably on 4.3 firmware. I cannot guarantee it will work, but I believe the chances are pretty good that it will.
Just remember, if it doesn't work, dont give up on the first try. Many have had to run through the process several times before it would actually boot up again.
The only other tip I can think to give is to make sure you buy a decent sd card. It doesn't have to be top of the line, but there are tons of fake ones out there that would be less likely to work. If you can, try to buy one from an authorized dealer for whatever brand you are considering. This greatly reduces the chance of getting a bad card.
Click to expand...
Click to collapse
4.0.x was the last firmware, i never got to update it. i bought a PNY 16gb microSD HC class 4, it was 25 bucks at the local drug store, i was hoping for a class 6 - 10 but i believe it is a good quality card, maybe you would know better?
I won't lie, I am not a big fan of PNY, but as long as its the real thing, I think it should work. Class 6 or better is recommended, but it has worked on class 4 cards too. At this point, the only thing left to do is give it a shot. Good luck!