CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wik: http://wiki.cyanogenmod.org/w/T0lte_Info
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Galaxy Note 2 LTE (GSM), or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Read known issues ans FAQs
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
Downgrading to 4.1.x ROMs:
- After flashing your 4.1 ROM, flash the attached file to move your sdcard content out of the 0/ subfolder.
DOWNLOADS
Click to expand...
Click to collapse
CM10.1 official nightly builds:
http://www.get.cm/?device=t0ltetmo
Google Apps:
http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#t0ltetmo/cm10.1/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!
Damn!! I cant believe my eyes. thank you!
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Are there any specific instructions from going from cm10.1 back to another sammy rom.. if im not mistakin I think it changes something in storage location? Anyways cm10.1 is here! !!
Sent from my SGH-T889 using xda app-developers app
pezlomd said:
Are there any specific instructions from going from cm10.1 back to another sammy rom.. if im not mistakin I think it changes something in storage location? Anyways cm10.1 is here! !!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Updated OP. See attached file
Can't download...
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
404 error
So no call bugs? Glad you figured out the problem!
skater4690 said:
So no call bugs? Glad you figured out the problem!
Click to expand...
Click to collapse
no call bugs here. we're using HAL audio til we figure out the issue with open source audio.
Here is a build for those that can't wait til tomorrow for the official bot nightlies:
http://jenkins.cyanogenmod.org/job/android/18153/
Here is a working link cm-10.1-20130118-EXPERIMENTAL-t0lte-buildtest.zip
madmack said:
no call bugs here. we're using HAL audio til we figure out the issue with open source audio.
Here is a build for those that can't wait til tomorrow for the official bot nightlies:
http://jenkins.cyanogenmod.org/job/android/18153/
Click to expand...
Click to collapse
Sweet! Downloading now and will let you know if I find anything out of the norm.
Thanks madmack for all your hard work!!
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
does wifi tether work on dis rom?
send from my jailbroken iphone 5
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Rom booted but everything force closed and I couldn't do anything.
milenko11 said:
Rom booted but everything force closed and I couldn't do anything.
Click to expand...
Click to collapse
Did you do a factory reset ? Did you wipe cache/dalvik?
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Sweet
Hastily spouted for your befuddlement
Guess it's time to root my phone again. Thanks!
Everything is working well just missing some settings menu.... Cant turn on USB debugging or hold the back button to kill apps area. I believe performance is missing as well... Otherwise seems solid right now
Re: [ROM][SGH-T889 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
teshxx said:
Did you do a factory reset ? Did you wipe cache/dalvik?
Click to expand...
Click to collapse
I flashed the wrong gapps.
The only issue I see is my data connection is dropping constantly
Couple things that I came across.
(1) 3g/h/h+ icons keep disappering (Data is still connected just the icon is missing. Comes back in few seconds)
(2) Auto rotate doesn't work at all.
- There seems to be no accelerometer support. You can't play most games bc of this or rotate apps such as browser or videos.
Other than that it's pretty solid. Thanks.
is there anyway we can do this wit TWRP recovery?
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jellybean), which is designed to increase performance and reliability over stock Android for your device.
THIS IS A PREVIEW BUILD, NOT AT ALL MEANT FOR DAILY USE.
Though i still use it as my daily driver.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
Check Known Issues (In the second post) first.
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Build 4: 20120829
Download: link
Build 3: 20120730
Download: link
Build 2: 20120722
Download: link
Build 1: 20120715
Download: linkGoogle Apps addon:
Version: gapps-jb-20120729
Download: link
Version: gapps-jb-20120717
Download: link
Version: gapps-jb-20120716
Download: link
Mirror: Link
P1 only for now.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Working:
Wifi
Bluetooth (untested)
RIL (Calls / 3G / Messaging)
FFC (Front Facing Camera)
Audio
Changelog:
20120715:
Initial Build
20120722:
Merged code from crespo kernel (Nexus S)
hwcomposer works now, so it's much faster.
Upstream merges from CM.
20120730:
DeviceParts are in
Loads of upstream merges from CM (Themes are in )
20120829:
Loads of changes, particularly switching to a new partition layout.
Pretty stable now if you don't do much multi-tasking.
IMPORTANT: Read this post http://goo.gl/5IWIK
Known Issues:
Browser is wonky, causes freezes
Not all sensors work (auto-brightness is one thing not working)
Anything else i forgot. (remember this is still a preview)
Thanks Cedasi,
Who knows where the galaxy tab 7 would be without you.
I'm assuming this is mtd?
Sent from my SPH-D700 using Tapatalk
DaKillaWilla said:
Thanks Cedasi,
Who knows where the galaxy tab 7 would be without you.
I'm assuming this is mtd?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Indeed it is.
Build up, have fun people
No p1c
Damnnnnnnnnn
Sent from my SPH-P100 using Tapatalk
ahh..only p1 no p1c was looking foward for this but good job anyways
Testing now.
Sent from my GT-P1000 using xda premium
Thank you Cdesai! Yes, it would be cool to have the source code of our core. We test and hope for the speedy stable release
Seems pretty good so far
Google Now works for me. I can install apps. I'll run this as my daily for battery observation. Now just need the tab settings and onscreen buttons.
Overall nice work .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P1000 using xda premium
Currently on CM9 RC, but ill give this a go since its not my main tablet anymore.
w1ll1m said:
Currently on CM9 RC, but ill give this a go since its not my main tablet anymore.
Click to expand...
Click to collapse
No reason not even if it was your main device. Other than lag here and there, build is nice
Sent from my GT-P1000 using xda premium
So im one of three apparently with the P1C
slimdizzy said:
Seems pretty good so far
Google Now works for me. I can install apps. I'll run this as my daily for battery observation. Now just need the tab settings and onscreen buttons.
Overall nice work .
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
While I hope for those who want it can get the on screen buttons...
PLEASE PLEASE PLEASE FOR THE LOVE OF GOD make one where there are NO on screen buttons as well... I hate to waste screen space on the onscreen buttons when I have them on my device, as well as MANY applications including Grand Theft Auto 3 and more that doesn't, and probably cant ever have a fullscreen feature that hides them due to how the application functions!
Hey cdesai thanks that you port the jelly bean to our tab but will cyanogenmod 10 be 240dpi or 160dpi?, because Google said that 240 dpi is optimized for 7 inch tablet in android 4.1.1.
Is there more lag then ics?
Sent from my Galaxy Nexus using Tapatalk 2
can I flash this over AOKP B#40?
I have to re-flash gapps?
Wipes?
Major bugs what makes this rom "not for daily use"?
Sent from my GT-P1000 using Tapatalk 2
Qqqxxxzzz said:
can I flash this over AOKP B#40?
I have to re-flash gapps?
Wipes?
Major bugs what makes this rom "not for daily use"?
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
Wipe all and flash the gapps from OP. Or any JB gapps
Sent from my Nexus S using xda premium
Just making sure here since I'm on a shoddy network....
CM10 MD5: aa2878d4315e494a83b6ccfbf5678ab3
JB Gapps MD5: 578bc0a70a0a79e1c8b7a076adf6de1c
Can someone confirm for me?
Sent from my GT-P1000 using xda premium
THANKS
[ROM] CyanogenMod 10 Alpha build - U jelly?
Click to expand...
Click to collapse
:cyclops:
Question Threads are not allowed inside development forums, please read our Forum Rules before opening new threads...Thread Moved to Q&A
:victory:LOL!:victory: Thanks cdesai, your efforts on continuing development on the galaxy tab are greatly appreciated by the whole community and the entire XDAStaff, as said before, you are truly an example of the xda-developers ethos. :highfive:
Somehow ive lost root. But it is running smooth, very nice, would possibly call this a beta rather than alpha.
Good Job.
CyanogenMod 10 For the Motorola Xoom
(Wingray, Stingray, & Everest)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Wipe the data & cache partitions of your device.
Flash CyanogenMod 10.
Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Changelog:
Wingray Nightly Changelog
Stingray Nightly Changelog
Everest Nightly Changelog
Gerrit Merge Changelog
Download Links:
Wingray (Wifi-Only)-
Nightly Downloads: link
Release Candidates: Pending
Stable Releases: Pending
Stingray (LTE)-
Nightly Downloads: link
Release Candidates: Pending
Stable Releases: Pending
Everest (3G)-
Nightly Downloads: link
Release Candidates: Pending
Stable Releases: Pending
Gapps-
Select most recent for 10.0.x: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Reserved
Awesome work, thanks so much. Now we have a thread to discuss CM10 rather than hijacking the CM9 thread
Lookin good so far! I love seeing my Xoom refusing to die.
Thanks Team Rogue. Been running the experimentals for a while
Woo hoo! :thumbup:
round of applause with much love
:highfive:
Trebuchet kept stopping after I installed the 9/12 nightly. It's been fine so far on the 9/13 build.
If I use the gapps package above, my system partition maxes out at 252/252mb.
I know this has been an ongoing issue
Tried the EOS gapps package and now I've got room for adaware
For those having problems with system partition maxing out. Use this LatinIME.apk rather than the one that comes in CM10 stock. It is just English UK language and frees up 18mb or so. Of course this'll only work if you use english but here you go anyway.
CM10-Wingray-Nightly build: cm-10-20120912 - Screen orientation not changing
Hi.
I love the look of the CM JB builds. I loaded the 0912 nightly and noticed the automatic screen orientation wasn't working for me. I set the auto-rotate setting and it never would take.
I then tried to set Mantano Reader to have a portrait setting and it never took - it was only in landscape. Around that time I started getting "Trebuchet stopped" errors left and right to the point I just restored an older EOS build.
Thanks for the great work and I look forward to trying the latest build.
donatien97 said:
Hi.
I love the look of the CM JB builds. I loaded the 0912 nightly and noticed the automatic screen orientation wasn't working for me. I set the auto-rotate setting and it never would take.
I then tried to set Mantano Reader to have a portrait setting and it never took - it was only in landscape. Around that time I started getting "Trebuchet stopped" errors left and right to the point I just restored an older EOS build.
Thanks for the great work and I look forward to trying the latest build.
Click to expand...
Click to collapse
Use 0913 build. Do NOT use any prior builds, as they don't have the sensor libs.
rmkilc said:
Use 0913 build. Do NOT use any prior builds, as they don't have the sensor libs.
Click to expand...
Click to collapse
Thanks big time! I'll give it a shot.
BTW - should I do a full wipe and use Titanium Backup to restore apps or is it sufficient to just wipe the cache and flash. I know this has probably already been asked before, but...
Thanks again!
donatien97 said:
Thanks big time! I'll give it a shot.
BTW - should I do a full wipe and use Titanium Backup to restore apps or is it sufficient to just wipe the cache and flash. I know this has probably already been asked before, but...
Thanks again!
Click to expand...
Click to collapse
I think it depends on what you are coming from. Make a nandroid and give it a shot!
sweet! dl'ing 0913 now
0913 works great, no issue, thanks.
Can I flash this over the cm9 rom? Or will I have to full wipe?
Sent from my Xoom using Tapatalk 2
What was the name of that app that notifies you when the latest CM10 nightly is up? Someone linked me to it on the play store not too long ago.
skylenorman said:
What was the name of that app that notifies you when the latest CM10 nightly is up? Someone linked me to it on the play store not too long ago.
Click to expand...
Click to collapse
you can use goo manager to do that. it will also download and flash it for you
Awesome work Bro...keep it coming
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wik: http://wiki.cyanogenmod.org/w/T0lte_Info
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Galaxy Note 2 LTE (GSM), or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Read known issues ans FAQs
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
Downgrading to 4.1.x ROMs:
- After flashing your 4.1 ROM, flash the attached file to move your sdcard content out of the 0/ subfolder.
DOWNLOADS
Click to expand...
Click to collapse
CM10.1 official nightly builds:
http://www.get.cm/?device=t0lteatt
Google Apps:
http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#t0lteatt/cm10.1/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!
HUGE thanks to you madmack, codeworkx, and all devs involved in making this happen so quickly!
Darn i'm not first
Liking the new fix
Huge Congrats! THANK YOU and Cody for all of yals work!
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Awesome!!!
Sent from my Samsung Galaxy Note II
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Woo thx a lots!!!
Sent from my GT-N7105 using Tapatalk 2
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Huge congrats and great job guys superb
Sent from my SGH-I317 using Tapatalk 2
madmack said:
Known issues: http://teamhacksung.org/wiki/index.php/CyanogenMod10.1:t0lte:Nightly:Known_issues
Click to expand...
Click to collapse
Thanks a bunch! The Known Issues page lists "Bluetooth: no sound," does that mean A2DP does not work?
Thanks for everyone's hard work bringing official CyanogenMod to LTE Note 2! :good:
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Fantastic..!
Sent from my Nexus 7 using Tapatalk 2
First thing I'm installing when I get my note 2! Thanks Devs
test build
here is the test build for those that can't wait til tomorrow
http://jenkins.cyanogenmod.org/job/android/18153/
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
This is amazing! And how are people downloading this already?
madmack said:
here is the test build for those that can't wait til tomorrow
http://jenkins.cyanogenmod.org/job/android/18153/
Click to expand...
Click to collapse
oooo you treat us to good here :highfive:
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Good stuff madmack and codeworkx! CDMA gnotes should be up next
Sent from my SPH-L900 using Tapatalk 2
cforlife said:
This is amazing! And how are people downloading this already?
Click to expand...
Click to collapse
because we build from his sources, im on someone else build while i wait for mine to finish syncing
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
i just jizzed a little in my pants a work lol
also what is t0lte, I'm just getting my note 2 delivered tomorrow so wanted to make sure I'm all ready. Is that a code name for the Note 2 like Mako is for Nexus 4.
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
dkotoric said:
i just jizzed a little in my pants a work lol
also what is t0lte, I'm just getting my note 2 delivered tomorrow so wanted to make sure I'm all ready. Is that a code name for the Note 2 like Mako is for Nexus 4.
Click to expand...
Click to collapse
Yea somewhat. That's the name for LTE Galaxy Notes 2's.
Sent from my SPH-L900 using Tapatalk 2
downloading.. like Christmas is back again.. thanks!
Re: [ROM][SGH-I317 / t0lte][JB][4.2.1] CyanogenMod 10.1 official nightlies
Great news looking forward to the official CM 10.1 support :thumbup:
Sent from my SGH-I317M using Tapatalk 2
Just flashed no problems. Only thing is I cannot select any of the LTE options when I do the *#*#4346#*#* thing. Is that a modem issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is OmniROM?
OmniROM Gerrit Review
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Important Information
Root access has not been incorporated into the ROM source yet, so you will need to flash SuperSU in recovery SuperSU
For all you Do-It-Yourself-ers, simply follow this guide to initialize a build environment and get your own builds started - OmniROM - Setting Up A Compile Environment
Got a bug report? Want to request a feature?
jira.omnirom.org
Click to expand...
Click to collapse
Installation Instructions
FROM ANOTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM OMNIROM TO NEWER RELEASE
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates :good:
Click to expand...
Click to collapse
Downloads
ROM:
jflte
http://dl.omnirom.org/jflte/
Gapps:
Banks Gapps
PA 0-Day Gapps
Click to expand...
Click to collapse
Contributors/Credit
The OmniROM Team - Great devs that have taught me just about everything I know about this stuff in such a short amount of time
CyanogenMod
ParanoidAndroid for the GApps package
@jumoog for working with me on the jf family of devices (MOAR Galaxay S4's to be supported soon!)
@SferaDev for ALL the work on adding Samsung RIL support
@CNexus for his awesome boot.img tools and helping me out
@Evisceration for his insane kernel pwnage
Testers
@CPA Poke
@LamboDroid19
@RockMan195
@crzygrmn
@uberstupd
@Pump Ac7i0n
And anyone else I apologize I forgot on this list but thank you
Source
OmniROM Source
XDA:DevDB Information
OmniROM, a ROM for the T-Mobile Samsung Galaxy S 4
Contributors
jakew02
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Rooted, Custom Recovery
Based On: AOSP
Version Information
Status: Alpha
Current Stable Version: -
Current Beta Version: -
Created 2013-12-05
Last Updated 2014-04-08
Changelog
Changelog
OmniLog - jfltetmo
Q&A
Frequently Asked Questions
Q: Why don't I have root access after installing OmniROM?
A: OmniROM does not have an official, prebuilt root method yet, so you'll just need to flash SuperSU in recovery and you'll have 100% working root access. SuperSU can be found here: SuperSU
Q: Where is <insert feature here>, like CM/AOKP/PA/etc have??
A: Omni is still very early in development, but moving at an incredibly fast rate. New feature, bug fixes, and device support are added just about daily. Check it out here: OmniROM Gerrit Review for the latest and greatest
Q: How do I start/stop screen recording?
A: Volume UP + Power will start screen recording. Simply drag the notification bar down and click the button to stop.
Q: HALP NFC doesn't work!!
A: We know.
awesome...thanks
First post references sprint gs4, might wanna fix that to avoid confusion. Thanks for posting this.
edit: flashed ok, no probs so far, except that you'll need to convert adaway to a system apk if you use that. That's a 4.4 issue, not specific to this rom.
Also, some things to look forward to in the near future:
Omni File Explorer - OmniROMs native root file manager
native root support (you will no longer need to flash SuperSU in recovery)
OpenDelta - Omni's OTA Updater
NFC fix *properly*
Multi-Window
a big surprise in the next few hours
Anyone get ART working? It just reboots back into dalvik for me.
I've been looking forward to this ROM being available. But I see no mention of the feature that most interests me: split window (multi window).
Is it built in?/ working?
Thanks.
Sent from my Nexus 7 using xda app-developers app
Oscar_david said:
I've been looking forward to this ROM being available. But I see no mention of the feature that most interests me: split window (multi window).
Is it built in?/ working?
Thanks.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
He just stated to look forward to it in the near future look up a little and read it.
OP UPDATED
Looks like T-Mobile was first! First official OmniROM nightly. The OP has been updated accordingly.
Changelog: https://changelog.omnirom.org
Great work
johnny crapple said:
He just stated to look forward to it in the near future look up a little and read it.
Click to expand...
Click to collapse
Thanks, and sorry... I must have read every other post except that one somehow.
Cheers.
Sent from my Nexus 7 using xda app-developers app
Oscar_david said:
I've been looking forward to this ROM being available. But I see no mention of the feature that most interests me: split window (multi window).
Is it built in?/ working?
Thanks.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i didn't include multi-window in my builds to this point because I don't want to provide anything less than as close to perfection as we can get. multi-window is not ready for full implementation yet, but it will be merged as soon as it is. xplodwild and others are putting a LOT of time into it, so it'll be flawless when it gets merged.
but as of now, official nightlies are started. I will no longer be posting my manual builds here, but i will still be actively maintaining this thread.
Right on Jake. Nice to see you over here in t mobile. I'm going to be messing around with dual/tri booting a bit more now :screwy:
Sent from my SGH-M919 using xda app-developers app
is Active Display in the build sir and non intrusive calling.
munchy_cool said:
is Active Display in the build sir and non intrusive calling.
Click to expand...
Click to collapse
certainly are, with improvements
IF YOU WANT PHOTOSPHERE
Flash Banks 4.4.1 Gapps STANDARD instead of PA 0-Day
Is this the real 4.4.1? Or is this 4.4?
Sent from my SGH-M919 using Tapatalk
jakew02 said:
certainly are, with improvements
IF YOU WANT PHOTOSPHERE
Flash Banks 4.4.1 Gapps STANDARD instead of PA 0-Day
Click to expand...
Click to collapse
4.4.1
Sent from my SGH-M919 using xda premium
followed install instructions twice to the t tried 2 different downloads and both types of gapps and it is still not booting the one time it did boot none of the apps would open and hasn't booted since
third time was the charm it is now booting and working fine
Is anyone else missing the screen rotation setting under the display tab?
Sent from my SGH-M919 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 14
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This works only on I337M and i9505 with TWRP JFLTEATT recovery link TWRP here
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo . And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review . You can also view the changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Video Playback
Not Working/Bugs
Camcorder (Works on Google Camera)
Installation
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol + , home and power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
cm-14.0-20161029-UNOFFICIAL-jflteatt.zip
Sources
kernel
XDA:DevDB Information
Cyanogenmod, ROM for the AT&T Samsung Galaxy S4
Contributors
kn06497
Source Code: https://github.com/Cyanogenmod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Rooted and TWRP jflteatt Recovery
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-10-29
Last Updated 2016-10-29
I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.
cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614
This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m
Does this work on SGH-i537 (ATT, unlocked currently running 5.01)?
Thanks.
Open GAPPS
monsruzo said:
I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.
Click to expand...
Click to collapse
Try Open Gapps via web (http://opengapps.org) or their mobile app.
How would I flash this. I have jltecan and I've read that you are suppose to flash twrp jlteatt which I've tried but I still get the error. What to do to fix this problem??
edit : i got it working. apparently wiping dalvik,cache and system does not factory reset the device. lol i factory reste it and it worked. very smooth for an old phone. it was so laggy on stock but now its very snappy.
I have an S4 running latest stock rom from AT&T ...OK2. I am assuming I cannot do this? other threads are saying we cannot unlock the bootloader.
crisis_trustee said:
cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614
Click to expand...
Click to collapse
Dope!
Will there be another update or nightly for JFLTEATT, @crisis_trustee or @kno06497?
It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Sent from my SGH-I337 using Tapatalk
Using i337m. Should I be downloading 14.1 or 14.1 Nightly? Or is there much of a difference?
MikeOnX said:
It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Click to expand...
Click to collapse
In case this development or thread is effectively dormant, consider taking a look at OctOS (Nougat 7.1.1) for the S4. http://forum.xda-developers.com/galaxy-s4-att/orig-development/rom-team-octos-oct-n-t3532663/page3
christopherrrg said:
This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m
Click to expand...
Click to collapse
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks
Harsh0786 said:
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks
Click to expand...
Click to collapse
Sorry but I've given my s4 to my son a while ago, working with s6 edge.
I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]
Harsh0786 said:
I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]
Click to expand...
Click to collapse
You used the nightly build? 14.1
I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?
aces1288 said:
I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?
Click to expand...
Click to collapse
do you have the correct recovery for your device?
Sent from my HTC 10 using Tapatalk
mexicandroid said:
do you have the correct recovery for your device?
I hope so,, lol
I am using CWMR v6.0.4.7 should I be using something else ?
Click to expand...
Click to collapse
Nice stable rom
I installed it two days ago on a Rogers phone, only issues that I've noticed are that the WI-FI does not seem to automatically connect to my home network. Second issue was the proximity sensor, had to download a dialer apk. Here is the one I used //drive.google.com/file/d/0B3gC6ZOFEXSZNE1SR2dManJPbGc/view?usp=drivesdk
VOIP apps like hangouts still black out screen when on Audio calls, with the life proof case on. Without the case the sensor seems to function properly, Except...
Issue is none of the buttons will wake the screen.
This is why I replaced the dialer for the regular phone.