How do you know when it's running and do you have to run it
Every time you reboot?
You need too locate the init.d file and set it to run at boot. If it's working you will know because when you run the script it will say you are supercharged 100%
Sent from my SGH-T989 using xda premium
rymanh said:
You need too locate the init.d file and set it to run at boot. If it's working you will know because when you run the script it will say you are supercharged 100%
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I thought I'm remember reading that you were not Supposed to set it at boot. If you read the original thread it will tell you how to tell if it is working. And that is after you install it use 17 to reboot and open it with script manager again and when it come up the options list it will say your super charged below the list
Sent from my SGH-T989 using xda premium
In the script it advises not to run the script at boot but you are supposed to go to etc/init.d and set the S99SuperCharger and Bulletproof aps to run at boot.. Other wise you will need to run the script every time you start your phone
Sent from my SGH-T989 using xda premium
rymanh said:
In the script it advises not to run the script at boot but you are supposed to go to etc/init.d and set the S99SuperCharger and Bulletproof aps to run at boot.. Other wise you will need to run the script every time you start your phone
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have been in the intd folder before but I never seen
Anything about making run at boot. And by the way I am running
Cm10 official and it says I am 75% supercharged. I think that's
Because my ROM deletes something every time I boot.
edshawn911 said:
I have been in the intd folder before but I never seen
Anything about making run at boot. And by the way I am running
Cm10 official and it says I am 75% supercharged. I think that's
Because my ROM deletes something every time I boot.
Click to expand...
Click to collapse
Until I figured out I would have the same problem as you.. Only 75% whenever I reboot my phone.. After you set the file to run at boot it will be 100% every time I promise... Btw bulletproof apps is optional and doesn't count in your supercharger percentage.. But if you want it to work properly ou need to set it to run at boot as well
Sent from my SGH-T989 using xda premium
rymanh said:
Until I figured out I would have the same problem as you.. Only 75% whenever I reboot my phone.. After you set the file to run at boot it will be 100% every time I promise... Btw bulletproof apps is optional and doesn't count in your supercharger percentage.. But if you want it to work properly ou need to set it to run at boot as well
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
thanks a lot for your help. could you maybe give me your exact steps
so that i can use that as a guide. thanks in advance..
I use the smanager app... After you set up V6 the way you want it navigate to the file location specified near the top of the screenshot... etc/init.d/S99SuperCharger and make sure SU, and boot are set.
That's all you have to do
Sent from my SGH-T989 using xda premium
Related
Any one know how to get the CIA boot screen animation on the Evo 4G. I searched and found a file but when I flashed it, it didn't work. Dont think it was made for the Evo.
trey2050 said:
Any one know how to get the CIA boot screen animation on the Evo 4G. I searched and found a file but when I flashed it, it didn't work. Dont think it was made for the Evo.
Click to expand...
Click to collapse
i assume that this was prompted by the recent news of Osama Bin Laden's "death"?
actually it wasn't, I was looking for it for a few days but the Osama thing does make me want it more.
I used to have that boot screen on my WinMo Touch Pro. I don't know if I've seen an Android version.
Someone ported it to android no sure for what device. I have the zip file but it didn't work for me.
Sent from my PC36100 using XDA Premium App
Perhaps the zip file is not flashable? Or if it is but made for another Android device, just extract the bootanimation.zip and put it in the correct folder.
Post the zip and I'll take a look at it for you.
Sent from my ADR6300 using XDA App
http://www.4shared.com/file/UWLGl2yA/CIABootAnimationEdifyAmend.html
trey2050 said:
http://www.4shared.com/file/UWLGl2yA/CIABootAnimationEdifyAmend.html
Click to expand...
Click to collapse
This only downloads as 45kb. I will try it from my pc when I get home.
Sent from my ADR6300 using XDA App
Is there a problem with it being a zip file INSIDE of the zip file? There is really no other reason why it shouldnt work..?
Ok. So the zip file you posted was flashable, sort of. It had both edify and amend scripts in it. I don't think you can have both. This is just the extracted animation, resized and optimized. 13 megs was a bit large. Rename if necessary and use root explorer to install to the proper location. Probably system/ customize/ resource. I can make this flashable if you can give me a location of your current boot animation. I may have to adjust the speed. It was originally set to 60 fps. It's currently 15 fps. Try it out and let me know.
http://dl.dropbox.com/u/12915307/CIA_bootanimation.zip
silverxbv2 said:
Ok. So the zip file you posted was flashable, sort of. It had both edify and amend scripts in it. I don't think you can have both. This is just the extracted animation, resized and optimized. 13 megs was a bit large. Rename if necessary and use root explorer to install to the proper location. Probably system/ customize/ resource. I can make this flashable if you can give me a location of your current boot animation. I may have to adjust the speed. It was originally set to 60 fps. It's currently 15 fps. Try it out and let me know.
http://dl.dropbox.com/u/12915307/CIA_bootanimation.zip
Click to expand...
Click to collapse
I'm having problem too? I got this great startup bootloader zip I renamed it bootloader.zip tried replacing system /media/ bootloader file but won't let me, I'm running cm7 nightys latest update with tiamat kernal.
Sent from my PC36100 using XDA Premium App
I'm using Sprint Lover Rom the URL to the Rom is below. Ill look late to see where the boot animation files go on this rom and report back after class today.
http://forum.ppcgeeks.com/cdma-htc-...s-2-2-3-70-651-1-radio-wimax-pri-all-one.html
Sent from my PC36100 using XDA Premium App
trey2050 said:
I'm using Sprint Lover Rom the URL to the Rom is below. Ill look late to see where the boot animation files go on this rom and report back after class today.
http://forum.ppcgeeks.com/cdma-htc-...s-2-2-3-70-651-1-radio-wimax-pri-all-one.html
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Thanks
Sent from my PC36100 using XDA Premium App
fierceeagle2003 said:
I'm having problem too? I got this great startup bootloader zip I renamed it bootloader.zip tried replacing system /media/ bootloader file but won't let me, I'm running cm7 nightys latest update with tiamat kernal.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
If you press the R/W button first then you should be able to replace the file.
Sent from my PC36100 using XDA App
otooles said:
If you press the R/W button first then you should be able to replace the file.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks
Sent from my PC36100 using XDA Premium App
resize
silverxbv2 said:
Ok. So the zip file you posted was flashable, sort of. It had both edify and amend scripts in it. I don't think you can have both. This is just the extracted animation, resized and optimized. 13 megs was a bit large. Rename if necessary and use root explorer to install to the proper location. Probably system/ customize/ resource. I can make this flashable if you can give me a location of your current boot animation. I may have to adjust the speed. It was originally set to 60 fps. It's currently 15 fps. Try it out and let me know.
Can this be resized for the lg optimus s?
Click to expand...
Click to collapse
stoehner said:
silverxbv2 said:
Ok. So the zip file you posted was flashable, sort of. It had both edify and amend scripts in it. I don't think you can have both. This is just the extracted animation, resized and optimized. 13 megs was a bit large. Rename if necessary and use root explorer to install to the proper location. Probably system/ customize/ resource. I can make this flashable if you can give me a location of your current boot animation. I may have to adjust the speed. It was originally set to 60 fps. It's currently 15 fps. Try it out and let me know.
Can this be resized for the lg optimus s?
Click to expand...
Click to collapse
What resolution is your phone?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
The resolution for the evo? It's 800x480
I think it should be set to 45 fps just to make it safely run smooth.
Indirect said:
The resolution for the evo? It's 800x480
I think it should be set to 45 fps just to make it safely run smooth.
Click to expand...
Click to collapse
No. For the lg optimus s. And at 45 fps, it would play so fast you probably wouldn't see it. And choppy.
Sent from my ADR6300 using XDA App
I just used this script found HERE
Follow the directions...
Required:
rooted phone
busybox installed [get from market]
Terminal Emulator [get from market]
make sure your rooted and busybox installed....
Im using my deodexed rom, not debloated, my ram is hanging at 183-185mb
any questions about script ask in the original thread.
any questions on working on continuum, post in this thread
phone is amazingly faster!
NOTE: looks like it unroots phone.
To reroot use superoneclick 2. 3. 3
I'm working on what we can do to stop this...
Good find! This is a good boost.. What this does is:
The phone has a selected amount of memory for it's tasks. Over time this memory gets used up. When the phone's memory reaches a specific amount the phone automatically deletes specific files.. In the process of all of this, everything is slowed down. What this script does is delete the cache which is using up the ram/memory. Instead of allowing the phone to manage this, this script deletes the files in a specific interval.. In this case, i think it is every hour(don't quote me)..
I utulized something similar to this in my previous rom.. it however lowered the point the phone deleted the items out of memory automatically.
Many scripts like this are out.
Code:
#!/system/bin/sh
# Adrenaline Shot
sync;
sleep 1
echo "3" > /proc/sys/vm/drop_caches;
echo "1" > /proc/sys/vm/drop_caches;
sleep 1
echo " ** Turbo Boosted ** ";
One option you could do is create an init.d script to automatically run this(as long as you have imnuts' custom kernel installed)
Likewise, as long as you have busybox installed you should be able to make an sysctl script that will run this on boot.
pattielipp said:
Good find! This is a good boost.. What this does is:
The phone has a selected amount of memory for it's tasks. Over time this memory gets used up. When the phone's memory reaches a specific amount the phone automatically deletes specific files.. In the process of all of this, everything is slowed down. What this script does is delete the cache which is using up the ram/memory. Instead of allowing the phone to manage this, this script deletes the files in a specific interval.. In this case, i think it is every hour(don't quote me)..
I utulized something similar to this in my previous rom.. it however lowered the point the phone deleted the items out of memory automatically.
Many scripts like this are out.
Code:
#!/system/bin/sh
# Adrenaline Shot
sync;
sleep 1
echo "3" > /proc/sys/vm/drop_caches;
echo "1" > /proc/sys/vm/drop_caches;
sleep 1
echo " ** Turbo Boosted ** ";
One option you could do is create an init.d script to automatically run this(as long as you have imnuts' custom kernel installed)
Likewise, as long as you have busybox installed you should be able to make an sysctl script that will run this on boot.
Click to expand...
Click to collapse
Thanks for explaining it. Did imnuts get unit.d to work? I did not see a confirmation
Sent from my SCH-I400 using xda premium
So I flashed this on ec09 and I lost root. Any ideas?
Sent from my SCH-I400 using xda premium
With imnuts kernel init.d scripts are working.. they are finicky, but i did have them working for a period of time when i was looking into init.d and sysctl scripts.
biznazz said:
So I flashed this on ec09 and I lost root. Any ideas?
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
flash another ec09 build.. most include root capabilities.. If you want a stock deodexed and rooted build go with ciscoo's build.. if you want deodexed adn debloated, i have a release out.. Both of these are rooted...
biznazz said:
So I flashed this on ec09 and I lost root. Any ideas?
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
As did i lol... superoneclick 2.3.3 works
Sent from my SCH-I400 using xda premium
Ok thanks ciscoo. Could you add that bit of info into the op for others that decide to flash this. thanks duder
Sent from my SCH-I400 using xda premium
Sure will. I wasn't sure until u mentioned it.
Sent from my SCH-I400 using xda premium
Just tried this,FREAKIN AWESOME!
Sent from my SCH-I400 using Tapatalk
abby_nitewolf said:
Just tried this,FREAKIN AWESOME!
Sent from my SCH-I400 using Tapatalk
Click to expand...
Click to collapse
Did it unroot ya though?
Sent from my SCH-I400 using xda premium
ciscogee said:
Did it unroot ya though?
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
Just flashed. Insta unroot. S1c rerooted fine. Here's my question. I looked, before I rooted again. Su is still in bin, and su and busybox are both in xbin. Maybe someone better with scripts can clear this up, but i can't see where the boost script should affect su at all. I looked at the updater script, and the boost script itself. I'd be very curious, if someone knows.
Sent from my SCH-I400 using Tapatalk
When you run this it removes all running scripts and applications from the ramdisk that are stored in the cache. Root is given at startup as well as other scripts being run only once, however they stay in the ram until the memory is needed, then they are replaced. This completly clears the cache.. for those running this, if you reroot your phone does this unroot it again after a specific amount of time? 1 hour or 1 day after the script is run?
pattielipp said:
When you run this it removes all running scripts and applications from the ramdisk that are stored in the cache. Root is given at startup as well as other scripts being run only once, however they stay in the ram until the memory is needed, then they are replaced. This completly clears the cache.. for those running this, if you reroot your phone does this unroot it again after a specific amount of time? 1 hour or 1 day after the script is run?
Click to expand...
Click to collapse
Rerooted at 0730. It's 1245 now. Just checked and i still have root.
Sent from my SCH-I400 using Tapatalk
Txwolf1980 said:
Rerooted at 0730. It's 1245 now. Just checked and i still have root.
Sent from my SCH-I400 using Tapatalk
Click to expand...
Click to collapse
Is ram still down also?
Sent from my SCH-I400 using xda premium
To be honest, There was only an 11mb drop with me. But, that (such as it was) is back up. Just ran it again, kept SU, but usage actually increased... Figures, I'd have the retarded phone of the bunch. Kinda supports the whole 'phone reflects it's user' line of thought.
yeah i was confused when it unrooted me. i just pushed the files back in and activated root again. It has been a day already and i still have root. i had about a 30mb difference with me. it may not be much for others but for me every mb counts.
In script OP. not this threads OP. Is the fix for unroot problem.
Sent from my SCH-I400 using xda premium
ciscogee said:
In script OP. not this threads OP. Is the fix for unroot problem.
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
Lol you beat me to it, i was about to post that
Sent from my ADR6425LVW using Tapatalk
This is my Data Speed Tweak that would be found in my "DARKSTAR" ROM ( http://forum.xda-developers.com/showthread.php?p=22991708#post22991708 )
It is a flashable .zip
IF SOMETHING HAPPENS ITS ON YOU!!!
This has been tested on 3 gingerbread ROMs and 2 ICS ROMs, but it should work on any rooted ROM (including stock) on the E4GT.
Code:
installing
1.) reboot into CWM or any custom recovery
2.) install from external SDcard
3.) reboot
i went from .32 megabits/sec (fastest) to .75 megabits/sec (slowest) (on 3G)
**This will work in most areas but not all.**
What does this change to increase 3g speed?
Sent from my SPH-D710 using xda premium
blackcanopy said:
What does this change to increase 3g speed?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
it adds a file to the system part of a ROM
When i go to install this in cwm, I get a Error status 6, installation aborted. Yes it is on the external sd card. any ideas?
First try and reinstall. i prefer to install from my pc because it seems more reliable that dling from my phone. test speeds before and after and let us know how it goes. what cwm are you using. you might want to try the latest zip/tar for your build if your not already on it.
jazzneel said:
When i go to install this in cwm, I get a Error status 6, installation aborted. Yes it is on the external sd card. any ideas?
Click to expand...
Click to collapse
I got the same error. I downloaded to both internal and external and tried flashing both
Sent from my SPH-D710 using xda premium
blackcanopy said:
I got the same error. I downloaded to both internal and external and tried flashing both
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i just updated the update script so try and redownload
jamcar said:
it adds a file to the system part of a ROM
Click to expand...
Click to collapse
Hey Jamcar, any possibility of giving us a little more info on what this actually adds to the system?
I tried downloading again to both internal and external and flashed both. I am still getting the same error
Sent from my SPH-D710 using xda premium
jasone4gt said:
Hey Jamcar, any possibility of giving us a little more info on what this actually adds to the system?
Click to expand...
Click to collapse
it puts a file in the /system/etc and it tell the radio how to connect to the network and it increase the connection speed for a faster download
Is this just a script that does the DNS or whatever changes to skip the Sprint proxies?
If so awesome, good stuff =) If not I'd love to know so I can try this as well.
For those who haven't seen it before though, you can do it manually from this Qbking vid.. http://www.youtube.com/watch?v=2LnUFd4osq8
It helped mine out a little bit.. doubled it probably though trust me it wasn't impressive beforehand so doubling wasn't much of an accomplishment.
Is it a file that can just's be pushed into the proper folder? Flashing doesn't seem to be working for me
Sent from my SPH-D710 using xda premium
blackcanopy said:
Is it a file that can just's be pushed into the proper folder? Flashing doesn't seem to be working for me
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
yes using adb or root explorer extract the .zip and put the only file in the /system/etc and reboot
jamcar said:
i just updated the update script so try and redownload
Click to expand...
Click to collapse
Downloaded after this and I am also getting the error.
Ok will try that.
When pushing this, I already have a file of the same name. They both appear to have the same info. So did it flashed (or at least put THAT file in place)?, but have an error on something.
Sent from my SPH-D710 using xda premium
borkan said:
Is this just a script that does the DNS or whatever changes to skip the Sprint proxies?
If so awesome, good stuff =) If not I'd love to know so I can try this as well.
For those who haven't seen it before though, you can do it manually from this Qbking vid.. http://www.youtube.com/watch?v=2LnUFd4osq8
It helped mine out a little bit.. doubled it probably though trust me it wasn't impressive beforehand so doubling wasn't much of an accomplishment.
Click to expand...
Click to collapse
no that dns bypass is possible via a build.prop edit but thats not what this is, this is just simply a sysctl tweak, you can read about it here http://forum.xda-developers.com/showthread.php?t=523707 op should update his post that it works on ALL android because we ALL have the linux kernel
Perhaps those that have already done it manually can't do by CWM because there is no change to the script?
Sent from my SPH-D710 using xda premium
shabbypenguin said:
no that dns bypass is possible via a build.prop edit but thats not what this is, this is just simply a sysctl tweak, you can read about it here http://forum.xda-developers.com/showthread.php?t=523707 op should update his post that it works on ALL android because we ALL have the linux kernel
Click to expand...
Click to collapse
You just answered my question, I'm about to bake this in my own little rom. Samsung forums always make me feel funny because everything is the same but with a lil diffrent tweak or theme here or there so I never release my work
something else kinda odd is the date on the one already on my system is dated 01 Aug 08 the one from your zip is dated 14 Nov 11. But they both have exact same lines within the script. And they are both 540bytes. MD5 has same number as well. I don't know if any of this info is helping anyone, but just trying to share what I am getting on my end.
Sent from my SPH-D710 using xda premium
Getting an error when trying to flash
Sent from my SPH-D710 using XDA App
After I installed the wicked rom I try to underclock it because it comes with its own tool and its over clocked but I keep getting an error .
Sent from my SGH-T999 using xda app-developers app
The program is called oc uv beater .. can I just uninstall it via titanium and will that set my CPU clock to the normal 1.5ghz ?
Sent from my SGH-T999 using xda app-developers app
yeah i didnt like that app so i just uninstalled it from titanium backup. Now I just use set cpu and everything is working good.
circuit.007 said:
yeah i didnt like that app so i just uninstalled it from titanium backup. Now I just use set cpu and everything is working good.
Click to expand...
Click to collapse
If I uninstall it what will my clock be at ?
Sent from my SGH-T999 using xda app-developers app
probably at whatever you have it at now. It wont change just because you uninstall it. But once you uninstall it and use another app like setcpu or something you can change the clock to 1.5 or whatever you like and it will stick.
circuit.007 said:
probably at whatever you have it at now. It wont change just because you uninstall it. But once you uninstall it and use another app like setcpu or something you can change the clock to 1.5 or whatever you like and it will stick.
Click to expand...
Click to collapse
Ok good. Because every time I change it to 1.4 on this apps it never sticks and always goes back to 1.7 and I don't want that much because of battery .
Sent from my SGH-T999 using xda app-developers app
Yeah it should stick, make sure you check set on boot in set cpu.
Also you might want to try upgrading your kernel. im on trinity 43b and its amazing.
circuit.007 said:
Yeah it should stick, make sure you check set on boot in set cpu.
Also you might want to try upgrading your kernel. im on trinity 43b and its amazing.
Click to expand...
Click to collapse
All I have done to my phone so far is rooted and installed wicked rom. I am not familiar with kernels. Can you guide me
Sent from my SGH-T999 using xda app-developers app
Alright you may want to do some more research first.
But to install the trinity kernel 43b stock here are the steps.
1) go to tmobile original android development fourm and click on trinity thread
2)read the thread (lots of useful information and you can see other peoples results...at least skim the thread)
3)go to original post (1st post) click on the blue website image/logo you will be redirected. On the left click on the tmob/atnt link and download 43b stock kernel.
4)put it on sd card
5) go to cwm wipe cache and dalvik cache
6)flash above kernel from your sd card
7)Reboot phone
8)change your settings in setcpu or wherever
9) Enjoy
circuit.007 said:
Alright you may want to do some more research first.
But to install the trinity kernel 43b stock here are the steps.
1) go to tmobile original android development fourm and click on trinity thread
2)read the thread (lots of useful information and you can see other peoples results...at least skim the thread)
3)go to original post (1st post) click on the blue website image/logo you will be redirected. On the left click on the tmob/atnt link and download 43b stock kernel.
4)put it on sd card
5) go to cwm wipe cache and dalvik cache
6)flash above kernel from your sd card
7)Reboot phone
8)change your settings in setcpu or wherever
9) Enjoy
Click to expand...
Click to collapse
That sounds very simple just like installing the rom. I might give it a shot and see if I get better results. BTW changing my clock it seems better now !
Sent from my SGH-T999 using xda app-developers app
So I just stumbled across this mod:
http://forum.xda-developers.com/show....php?t=2272317
I.e. It's not mine and I take no responsibility or credit, but so far it's made my phone even more blazingly fast and buttery smooth.
It was in the Lg optimus g at&t... I used it on my og and just installed it on my pro seems to be working great!!! will test for the next 24hrs. Theres a app on post 5.
Gotroot said:
So I just stumbled across this mod:
http://forum.xda-developers.com/show....php?t=2272317
Click to expand...
Click to collapse
Here's a clickable version of the link.
it says init.d is required, do we have init.d on the stock kernel?
Erik
download the init.d installer from the market for 99 cents, run it and it will install init.d. after reboot mount your system as rw and then install the projectxtreme app open it and click install and your done. check in the ect/init.d folder using a root file explorer and you'll see the projectelxtreme scripts in there. if not run install from app again reboot and check. ilan easy way to know is by seeing its granted su permissions at the bottom of your screen when you turn your phone on or reboot.
ricco333 said:
it says init.d is required, do we have init.d on the stock kernel?
Erik
Click to expand...
Click to collapse
Pimp my rom(free) can do that for you
Sent from my LT30p using xda premium
Which version did you apply in cwm?
Sent from my LG-E980 using Tapatalk 2