Related
Just curious about experiences with either or both. I have been steadfast with cleanGB and am curious about Sleeper but don't want to have to wipe data and reinstall everything, to include my mail settings etc..etc..
Is it even worth considering? Thanks!
They are both very good roms! That's about all I can give you... sleeper rom will gie you evrything that clean gb has. Really its all about what agrees with your phone better... just backup in cwm and flash sleeper rom... if you figure out its not for you restore your backup and your right where you left off!
Sent from my SPH-D700 using Tapatalk
Naddict said:
Just curious about experiences with either or both. I have been steadfast with cleanGB and am curious about Sleeper but don't want to have to wipe data and reinstall everything, to include my mail settings etc..etc..
Is it even worth considering? Thanks!
Click to expand...
Click to collapse
yea, what flast said.. just go ahead and try out the rom if you like. just do a nandroid backup of cleangb before you flash the sleeper rom. that way if you don't like sleeper rom, you can just revert back to the nandroid backup and continue where you left off.
Why would you lose everything? Providing both ROMs are on the same file system, do a nandroid, do your wipes, flash other ROM, do an Advanced Restore data from your nandroid. All apps and settings are back.
How do I do a nandroid'?
Sent from my SPH-D700 using XDA App
Naddict said:
How do I do a nandroid'?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I don't know which recovery you are using but most are the same. Boot into recovery with the phone off, Press and hold in this order camer, volume down then power buttons. The recovery menu will come up. Scroll down to backup and restore, hit backup. You will see the advanced restore option to be used later.
Thanks Kenny, should have been more descriptive, I am on MTD and was unsure if it is the smae "old" way...thanks!
I've used both, and I honestly prefer the latest SleeperROM. I switched from SleeperROM 1.0.09 BML to GleanGB 1.04 MTD and was greatly impressed. It was faster, more efficient. Battery life was a negligibly worse (could be my settings or use for that timeframe), but still a great improvement above most others. I didn't personally like the circle battery mod, but that's just me.
When SenseiSimple put out the 1.1.02a release that fixed for MTD, I immediately jumped ship back. Battery life on my phone is better than it's ever been. I have no problems with ANYTHING.
Overall, I think SleeperROM is just more polished.
Naddict said:
Thanks Kenny, should have been more descriptive, I am on MTD and was unsure if it is the smae "old" way...thanks!
Click to expand...
Click to collapse
Yup. I have nandroids of CM7 and Legendary and can switch back and forth in like 5 minutes. Just remember not to mix your BML and MTD. There are specific procedures for that stuff.
How do I cnage the boot animation on sleeper? With cleanGB it was very easy, copy and paste type stuff.
Looks like sleeper is a little harder?
It should be the same... If not, flash a different kernel.
The release notes say it can be done...but I cannot delete, rename or move the files that are in the media folder...frustrating...
Sent from my SPH-D700 using XDA App
Naddict said:
The release notes say it can be done...but I cannot delete, rename or move the files that are in the media folder...frustrating...
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
You need Root explorer or ES File Manager with root explorer options set.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
You need Root explorer or ES File Manager with root explorer options set.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thanks again Kenny,
Had to reinstall ESfile explorer to get the access to root option, but even after that when I moved the new file into media folder I still have original boot screen that comes with rom....
What did you name your boot ani as? Was sanim.zip or bootanimation.zip? Try the opposite of what you did.
Kenny,
Tried both ways, sanim and bootanimation did not work...I understand that the kernel should support the change of boot ani's...really puzzling.
Not that this is the correct place, but I also encountered an issue with the Swype app that came preinstalled with the rom, it was missing the US Eng file, which caused me to have to install swype seperately...there were a couple other minor inconveniences too.
Thanks for your assistance in trying to help nevertheless. I am thinking about going back to CleanGB, have had better experiences with it...
Naddict said:
Kenny,
Tried both ways, sanim and bootanimation did not work...I understand that the kernel should support the change of boot ani's...really puzzling.
Not that this is the correct place, but I also encountered an issue with the Swype app that came preinstalled with the rom, it was missing the US Eng file, which caused me to have to install swype seperately...there were a couple other minor inconveniences too.
Thanks for your assistance in trying to help nevertheless. I am thinking about going back to CleanGB, have had better experiences with it...
Click to expand...
Click to collapse
No problem. I just read through most of the ROM thread and it states to simply replace the bootanimation.zip with your own. Did you delete the one in the folder before copying yours into it?
yes, I deleted both, there was both a sanim and a bootani file in the folder. Think that had something to do with it?
AS you are quite knowledgeable, could I ask a second question of you?
I like the color and brightness from Toad's Kernel, and was wondering if you might have found a matching set of color settings that replicate it's brightness and color scheme.
Reason for this is to use a kernel governor. Want to try using voltage control with more governor settings than what is offered by his kernel, but like the color of it...if that makes sense!
Naddict said:
yes, I deleted both, there was both a sanim and a bootani file in the folder. Think that had something to do with it?
AS you are quite knowledgeable, could I ask a second question of you?
I like the color and brightness from Toad's Kernel, and was wondering if you might have found a matching set of color settings that replicate it's brightness and color scheme.
Reason for this is to use a kernel governor. Want to try using voltage control with more governor settings than what is offered by his kernel, but like the color of it...if that makes sense!
Click to expand...
Click to collapse
Totally, you want an overdrive kernel but don't like voodoo color. Bbelos default colors in Shadowkernel work pretty well for me although still a little darker than stock colors. I think to make them a little brighter you have to boost the gamma values a little.
Thans Kenny! I have begged toad to add some governors to his kernel, but he expressed his disinterest....love his color, but would love to have smartassv2 along with his kernel.
Thanks again, I appreciate the quick reply!
Script Version!
Code:
This time I present to you a script that will in theory (and so far for me, in reality) save us some battery without having to risk our hardware with undervolting! I present to you...
[B]CPU Sleeper[/B]
[QUOTE]Honestly the Script can be made to work with any Dual Core / Quad Core! The Only Problem is you need to be Rooted!
~ Currently the issue with CM9, is that the boot becomes incomplete while in init.d folder without Modification to the sysinit..
~ however, with any rooted device you can download the script & continue to use it via a script manager app on every boot.
~ With the Script Manager App, this script virtually can run on any Multi-Processor CPU
Hope that clears things Up,
~~Eugene[/QUOTE]
[U]What is it?[/U]
Its a fairly simple script that will put CPU 1 OFFLINE when the screen turns off. Once the screen comes back on, it will allow CPU 1 back ONLINE.
[U]How does it work?[/U]
Since we have dual core CPUs, we have a CPU 0 and a CPU 1, core 1 and core 2, while the screen is off we really only need to have 1 core active, this script will make sure CPU 1 shuts off while the screen is off, then resumes normal usage when the screen comes back on.
[B][COLOR="red"]WARNING! READ THIS![/COLOR][/B]
This script relies on init.d OR script manager! CM9, for some reason, tends to run this at the exact same time it runs some other script (I forget atm which) and it will clash, causing no boot! CM9 users MUST use the script manager version install! Flex Reaper appears to work fine with it as init.d. I strongly urge you to use the script manager version of this, NOT the flashable version. Always make a nandroid backup before modifying the system, including this!
[U][COLOR="Red"]Instructions[/COLOR][/U]
Available in 2 versions, script only version which you can place wherever you want and run however you want, or a CWM/TWRP flashable zip that will place the file for you in /system/etc/init.d and set permissions.
[I]Version 1: Flashable[/I]
Same as any of my flashable releases, I did most of the work for you!
Make a full backup
Download to external SD card
Install from SD card
Pick the cpu sleeper zip file
it'll be almost instant
reboot
Shouldn't be any need to clear caches or anything like that.
[I]Version 2: Script only[/I]
This can be run in 2 ways, via init.d support, or via script manager. Both are pretty similar, and can be done a number of ways, however this is the basis of how.
[U]Init.d supported kernel:[/U]
Make a backup!
Download the script file, making sure no extensions get added onto the file. Copy the file to /system/etc/init.d and set the permissions to the following:
XOX
XOX
XOX
Once done, reboot the system, and it will take effect when your system is finished rebooting.
[U]Script Manager[/U]
This method is probably the better method, and should work with any kernel/ROM. Download the script file, making sure no file extensions get added, and copy it to /system/etc. Set the file permissions to:
XOX
XOX
XOX
Once done, load up script manager, select browse as root (if it isn't already set from the crossix mod method in the guide) then browse to /system/etc and select the script file S98cpu_sleep, then select ROOT and BOOT options. After this is set, reboot system.
[U]What do I do if I can't boot after using this?[/U]
You made that backup, right? Ok, then here is what you do.
Hold the power button until the tablet powers off
Press and hold the volume down button, next to the screen lock switch
Press and hold Power (while holding volume down)
Once the recover kernel message comes up, release the buttons
In CWM go to advanced, mounts, mount system, then format system
In TWRP, go to wipe, then wipe system
In CWM go to restore, advanced restore, restore ONLY system
In TWRP select restore, then uncheck all so ONLY system is checked
After restoring system, wipe cache and dalvik cache, then reboot system.
System should boot normally.
[B]Downloads[/B]
Available in 2 versions, script only version which you can place wherever you want and run however you want, or a CWM/TWRP flashable zip that will place the file for you in /system/etc/init.d and set permissions.
Dual Core:
Download: [COLOR="Red"]Script Only - Recommend Install via Script Manager App[/COLOR]
[URL="http://d-h.st/N1N"]CPU Sleeper script only[/URL]
Quad Core:
Download: [COLOR="Red"]Script Only - Recommend Install via Script Manager App[/COLOR]
[url=http://www66.zippyshare.com/v/9249467/file.html]cpusleep[/url]
Thanks to [COLOR="DarkGreen"]pio_masaki[/COLOR] for rewriting the OP
App Version:
Code:
[B]CPU Sleeper[/B]
~Free to all Memebers
~ Must Be Rooted to use App
[B][COLOR="Blue"]What is it?[/COLOR][/B]
Its a fairly simple App that will put CPU 1/2/3 OFFLINE when the screen turns off. Once the screen comes back on, it will allow CPU 1/2/3 back ONLINE.
[B][COLOR="Blue"]How does it work?[/COLOR][/B]
Since we have Dual & Quad core CPUs, we have a CPU 0 and a CPU 1/2/3, core 0/1/2/3, while the screen is off we really only need to have 1 core active "CPU0", this App will make sure CPU 1/2/3 shuts off while the screen is off, then resumes normal usage when the screen comes back on.
[B][COLOR="Blue"]Compatibility?[/COLOR][/B]
Works with any Dual Core & Quad Core Devices!
~ICS
~Gingerbread
[B][COLOR="Blue"]Battery Saving?[/COLOR][/B]
Battery savings all depends on Usage & idle times.
[U][COLOR="Red"]Instructions[/COLOR][/U]
download the App, install & either manually run it, or set to run every boot-up
[B]Downloads[/B]
[url=http://www20.zippyshare.com/v/85067559/file.html]CPU Sleep.apk[/url]
Credits:
Handlerexploit for the creation of the App.
As a begging dev myself, I appreciate your work. Keep on keeping on.
Not sure why previous thread was closed, as no reason was given, but the flashable works FINE on my phone. I had no issues whatsoever. If everyone were to follow the instructions listed they would see that they are advised to make a backup IN CASE something does go wrong and it won't boot. Major props for this man. Just curious, but I noticed that after flashing this it seems that when the screen is off the phone downclocks to 384k KHz. I do have a profile on SETCPU for when screen is off to downclock to 594k KHz. I'm assuming that this script is what is downclocking this below the minimum i had set in SETCPU?
klarthur said:
Not sure why previous thread was closed, as no reason was given, but the flashable works FINE on my phone. I had no issues whatsoever. If everyone were to follow the instructions listed they would see that they are advised to make a backup IN CASE something does go wrong and it won't boot. Major props for this man. Just curious, but I noticed that after flashing this it seems that when the screen is off the phone downclocks to 384k KHz. I do have a profile on SETCPU for when screen is off to downclock to 594k KHz. I'm assuming that this script is what is downclocking this below the minimum i had set in SETCPU?
Click to expand...
Click to collapse
I want the flash able zip any way you can send me the link. I'm glad to see some traction with the sprint s3
thanks in advance
Sent from my SPH-L710 using xda app-developers app
edisepic said:
I want the flash able zip any way you can send me the link. I'm glad to see some traction with the sprint s3
thanks in advance
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I would need permission from the OP to send it I believe, since he took it down from the OP :/ If the OP doesn't mind i'd be happy to
klarthur said:
I would need permission from the OP to send it I believe, since he took it down from the OP :/ If the OP doesn't mind i'd be happy to
Click to expand...
Click to collapse
Just make sure it works due to people just flashing before checking it works...
This is what got the OP Removed due to people failing to Read & understanding Logic..
eugene373 said:
Just make sure it works due to people just flashing before checking it works...
This is what got the OP Removed due to people failing to Read & understanding Logic..
Click to expand...
Click to collapse
It worked fine for me but I made a backup before flashing it to be safe, as stated in the OP. Thank you!
---------- Post added at 03:27 AM ---------- Previous post was at 03:23 AM ----------
edisepic said:
I want the flash able zip any way you can send me the link. I'm glad to see some traction with the sprint s3
thanks in advance
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
PM sent!
I would also like the cwm zip!
Sent from my SPH-L710 using xda premium
lballer69 said:
I would also like the cwm zip!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
PM sent!
wiped cache and dalvik and flashed and had no boot issues.
Sent from my SPH-L710 using xda app-developers app
lballer69 said:
I would also like the cwm zip!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
+1 please!
Sent from my SPH-L710 using xda app-developers app
thearch1tect said:
+1 please!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Look in the Market tomorrow for CPU Sleep
Why is this snake oil thread still here?
nabbed said:
Why is this snake oil thread still here?
Click to expand...
Click to collapse
It's a legitimate mod, if you hate it so much why not just leave it and go about your business? No need to fight over a matter of opinion... Seriously.
Sent from my SPH-L710 using xda premium
Trying this on a SGS2 dual core with AOKP . Pushed to init.d and it booted fine. Will let ya know what differences I see. Thanks for the work on this. The principle behind it makes sense. Hopefully it works as it should. Thanks again.
nabbed said:
Why is this snake oil thread still here?
Click to expand...
Click to collapse
Because it does work. It's not a Placebo effect & it does save battery...
There has been countless Number of People that has Confirmed this on the Atrix2 / SGS2 / Sensation / SGS3 and One X is currently being test as well..
~Eugene
eugene373 said:
Because it does work. It's not a Placebo effect & it does save battery...
There has been countless Number of People that has Confirmed this on the Atrix2 / SGS2 / Sensation / SGS3 and One X is currently being test as well..
~Eugene
Click to expand...
Click to collapse
Could you please PM me the cwm flashable version. I am constantly testing and flashing my phone and it would really make my life easier then pushing with Root Explorer each time. I would like to test this on a few different setups so I can tell my peeps if it works or not. Great job by the way.
scarmon25 said:
Could you please PM me the cwm flashable version. I am constantly testing and flashing my phone and it would really make my life easier then pushing with Root Explorer each time. I would like to test this on a few different setups so I can tell my peeps if it works or not. Great job by the way.
Click to expand...
Click to collapse
Just download the app
It's posted on the OP.
eugene373 said:
Just download the app
It's posted on the OP.
Click to expand...
Click to collapse
Are you referring to script manager? I went through the OP a couple of times and that's the only mention of an app I see. I could use that method but I still have to paste it into system/etc. Not trying to be difficult just want to make sure I'm jot going blind.
Edit. NM. I see it now
Thanks for reposting the apk and not punishing all of us:good:
For those of you who would like to run stock kernels with the builds
here is repacked FK23 kernel with my recovery and some init.rc edits.
SD card read speed.
Custom boot animation support
init.d support
Link:
AGAT_FK23_repack.tar Flash with ODIN or Mobile ODIN.
Did some edits in initramfs and run some tests.
Moved couple of apps to sd. After few reboots apps still working.
Moved apps to sd and flashed kernel separately. Apps were recognized on SD.
Tried to connect to pc in recovery.
ADB shell - works
Mount USB storage - not working. Will try to look into it more.
Hopefully it will work for all of you as well.
Don't have updater-binaries and updater-script for JB so can't make flashable zip yet.
If anyone has working JB flashable zip let me know and I'll try to make zip as well.
Installation instructions:
1. For best results copy tar file to root of your sd card
2. Use mobile ODIN to flash.
Phone will reboot.
It looks like any other method gives some problems with apps 2 sd.
Enjoy the kernel.
nice!
Sent from my SPH-D710 using xda app-developers app
Awesome!!!!! How can I flash it so ot doesnt trigger yellow triangle etc
colonel.shepard said:
Awesome!!!!! How can I flash it so ot doesnt trigger yellow triangle etc
Click to expand...
Click to collapse
Use mobile ODIN.
It never triggers yellow triangle.
Or use triangle away after flash.
Cool
Sent from my SPH-D710 using Tapatalk 2
Awesomeness right here...:beer:
Sent from my SPH-D710 using Tapatalk 2
Agat, I modined the kernel, now market doesn't allow me to install to sdcard
Sent from my SPH-D710 using Tapatalk 2
bordermadman said:
Agat, I modined the kernel, now market doesn't allow me to install to sdcard
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
You modified the kernel?
Can you be more specific?
What app did you try to install?
YOU. ARE. BEAUTIFUL. SIR.
Sent from the Normandy SR2 via Quantum [Universe JB v02] Entanglement
how exactly do I install this im confused.
Sent from my SPH-D710 using xda premium
Thanks for this Agat! Cheers :beer:
Sent from my SPH-D710 using XDA
I think he meant he used mobile odin to flash the kernel and now he cannot install to the SD
Where people come up with these short hand ways to say things boggles my mind... smh. :banghead:
Sent from my SPH-D710 using xda premium
Sorry, that was very vague of me, i installed via mobile odin, i was trying to install romtoolbox pro and tapatalk, it is worth mentioning that most apps that i had installed before flashing the kernel disappeared. :good:
agat63 said:
You modified the kernel?
Can you be more specific?
What app did you try to install?
Click to expand...
Click to collapse
I flashed using mobile odin and for some reason I lost access to all my purchased apps!!:crying: Gonna try the stock kernal one click and see if that fixes it. It tells me " Couldn't install on USB." I have the same problem as bordermadman.
rdavis429 said:
I flashed using mobile odin and for some reason I lost access to all my purchased apps!!:crying: Gonna try the stock kernal one click and see if that fixes it. It tells me " Couldn't install on USB." I have the same problem as bordermadman.
Click to expand...
Click to collapse
I have only 4 apps on sd and I moved them for testing purposes only.
gps status, root explorer, home switcher, titanium back up.
All 4 are working and I was able to move them back to device and then to SD again.
Apps mentioned above are paid apps. I don't want to buy them just to test if I can download.
Do you have any free app in the list that I can try.
I'm having ZERO issues downloading apps or accessing my purchased apps.
Sent from my SPH-D710 using xda premium
One clicked back to full stock kernel and all my paid apps show back up.
Working really good over here, thanks a lot Agat.
rdavis429 said:
One clicked back to full stock kernel and all my paid apps show back up.
Click to expand...
Click to collapse
I have few paid apps on the phone.
root explorer, beautiful widgets, Triangle away, Mobile odin.
I always use mobile odin to flash/test kernels.
All my paid apps are present and working without any problem.
agat63 said:
I have only 4 apps on sd and I moved them for testing purposes only.
gps status, root explorer, home switcher, titanium back up.
All 4 are working and I was able to move them back to device and then to SD again.
Apps mentioned above are paid apps. I don't want to buy them just to test if I can download.
Do you have any free app in the list that I can try.
Click to expand...
Click to collapse
I didn't have any problems with the free apps. Mobile Odin was one of the apps I lost access too. I did run a mD5 check before flashing.
I moved the file to my sd card and will try again in the morning. I'm pretty share I did some wrong on my end. If not, will try and capture a adb log for you.
How do you know when it's running and do you have to run it
Every time you reboot?
You need too locate the init.d file and set it to run at boot. If it's working you will know because when you run the script it will say you are supercharged 100%
Sent from my SGH-T989 using xda premium
rymanh said:
You need too locate the init.d file and set it to run at boot. If it's working you will know because when you run the script it will say you are supercharged 100%
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I thought I'm remember reading that you were not Supposed to set it at boot. If you read the original thread it will tell you how to tell if it is working. And that is after you install it use 17 to reboot and open it with script manager again and when it come up the options list it will say your super charged below the list
Sent from my SGH-T989 using xda premium
In the script it advises not to run the script at boot but you are supposed to go to etc/init.d and set the S99SuperCharger and Bulletproof aps to run at boot.. Other wise you will need to run the script every time you start your phone
Sent from my SGH-T989 using xda premium
rymanh said:
In the script it advises not to run the script at boot but you are supposed to go to etc/init.d and set the S99SuperCharger and Bulletproof aps to run at boot.. Other wise you will need to run the script every time you start your phone
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have been in the intd folder before but I never seen
Anything about making run at boot. And by the way I am running
Cm10 official and it says I am 75% supercharged. I think that's
Because my ROM deletes something every time I boot.
edshawn911 said:
I have been in the intd folder before but I never seen
Anything about making run at boot. And by the way I am running
Cm10 official and it says I am 75% supercharged. I think that's
Because my ROM deletes something every time I boot.
Click to expand...
Click to collapse
Until I figured out I would have the same problem as you.. Only 75% whenever I reboot my phone.. After you set the file to run at boot it will be 100% every time I promise... Btw bulletproof apps is optional and doesn't count in your supercharger percentage.. But if you want it to work properly ou need to set it to run at boot as well
Sent from my SGH-T989 using xda premium
rymanh said:
Until I figured out I would have the same problem as you.. Only 75% whenever I reboot my phone.. After you set the file to run at boot it will be 100% every time I promise... Btw bulletproof apps is optional and doesn't count in your supercharger percentage.. But if you want it to work properly ou need to set it to run at boot as well
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
thanks a lot for your help. could you maybe give me your exact steps
so that i can use that as a guide. thanks in advance..
I use the smanager app... After you set up V6 the way you want it navigate to the file location specified near the top of the screenshot... etc/init.d/S99SuperCharger and make sure SU, and boot are set.
That's all you have to do
Sent from my SGH-T989 using xda premium
Hello. When I am opening files or links it will ask me what app I would like to use, and even though I select "Always" afterwards it still prompts me again the next time I try the same action. Now I just hit "Just Once" in order to avoid that annoying "Clear defaults" message (Yes phone, I know where to clear defaults, you've told me a thousand times...). Any help would be appreciated. Thanks.
What Rom? Rooted or not?
Did you try the usual, turn it off and pull the battery, clean the odex left over files. ..etc?
Maybe some tweaks you did or a roque app you installed?
More information would be helpful.
Sent from my SGH-T889 using xda premium
Hello. It is rooted, but I'm pretty sure that this issue predates the rooting. I did it with a one click solution from here so I'm not sure what the rom is called. The screen shot attached should give you that info. Also, not sure what you mean by "clean the odex left over files". Thanks.
premiatul said:
What Rom? Rooted or not?
Did you try the usual, turn it off and pull the battery, clean the odex left over files. ..etc?
Maybe some tweaks you did or a roque app you installed?
More information would be helpful.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
You are currently on the old stock Rom.
Go here and install the latest version UVBMD1:
http://forum.xda-developers.com/showthread.php?t=2102380
Most likely that will fix your problem.
Sent from my SGH-T889 using xda premium
Does it matter which one I install (Factory Image, Odexed , Deodexed, Kernel, Modem)?
Also, can I just use ROM Manager from the app store o install it? Thanks.
premiatul said:
You are currently on the old stock Rom.
Go here and install the latest version UVBMD1:
http://forum.xda-developers.com/showthread.php?t=2102380
Most likely that will fix your problem.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
It is up to you which one you want.
It looks to me that you didn't do this before, so my advice is to read, read, read and when you think you understand it READ everything all over again. We don't want you to brick your phone.
Go to Original Development section and learn how to flash Roms.
Good luck.
Sent from my SGH-T889 using xda premium
I've rooted and flashed roms before on my previous two LG phones and my tablet, I've just haven't seen them labeled like that before (Factory Image, Odexed , Deodexed, Kernel, Modem). My question is: Which is the best/easiest one to use for a newb like me (or a link to good thread that explains the difference)? Thanks.
premiatul said:
It is up to you which one you want.
It looks to me that you didn't do this before, so my advice is to read, read, read and when you think you understand it READ everything all over again. We don't want you to brick your phone.
Go to Original Development section and learn how to flash Roms.
Good luck.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
I've been having the same issue.
T mobile note 2
Latest at&t Bean stalk Rom
Latest Devil kernel
No system apps are restored with tb
Basically no apps retain default settings
Examples
Facebook: does not retain dolphin as default browser
Handcent: does not retain quickpic as default gallery
This happens even if phone is not shut off. I can set them as default apps and at some point in the day they lose the setting. Happens whether clean install or dirty flash. Any ideas? If more info needed please advise.
Sent from my Note 2's big ass screen
I should add that some of my defaults work fine. I use different text editors to work on files from different apps and never have any issues with those. It seems to be mostly browsing issues on my phone.