My son's 989 got a notification of a software update last night. He is stock/rooted GB with CWM Recovery installed. When trying to do the update, it of course failed since the recovery was not stock. Now it says there is no update. Does anyone know what this update was and is there a stock/rooted version that I can Odin to his phone? Thanks for the help.
Found a stock unrooted ICS and installed it. Should be able to root it.
Related
Hey guys,
So I am on EG30 modem (stock), and I only installed crawlcj's odexed stock rooted ROM.
I got the OTA update notification today morning and I just pressed update and walked away for like 30 minutes, and when I came back there was a yellow triangle with the android figure on the screen and it seemed to be stuck.
So I just held down the power button to turn the phone back on and it seems that the phone is still working fine under EG30 but EK02 was nowhere to be found.
I'd like to get the EK02, do you know why it failed and what I need to do to get the OTA to install correctly?
Thanks in advance
it failed because you are rooted and dont have stock recovery anymore. so if you want to upgrade to EK02 you should just flash the update that is posted already for rooted phones its fast and easy to do.this is the link to get you right to the new modem. after you flash the modem upgrade just chose a rom that has also be upgraded too. now you have the new update its just that easy
http://forum.xda-developers.com/showthread.php?t=1352310
ewalk4866 said:
it failed because you are rooted and dont have stock recovery anymore. so if you want to upgrade to EK02 you should just flash the update that is posted already for rooted phones its fast and easy to do.this is the link to get you right to the new modem. after you flash the modem upgrade just chose a rom that has also be upgraded too. now you have the new update its just that easy
http://forum.xda-developers.com/showthread.php?t=1352310
Click to expand...
Click to collapse
I'm going to jump onto this thread to because I'm having the same issue (and have searched this high and low for a solution). I have Crawrj's Stock EG30 Deodexed with Root 3.0/Busybox 1.18.4 on my phone. All I would like to do is to upgrade to EK02 and 2.3.6 (which I'm not sure if it's one and the same), remain stock but retain root. I don't have an SD card in my phone and I don't have clockworkmod (@ewalk4366 the video in your link assumes the upgrader has CWM). Since the OTA failed, I'm at a loss of how to proceed next. It seems I'm missing one thing or another when it comes to trying to upgrade. Any help would be appreciated.
P.S. Sorry for some noob butter but I still don't have all the terminology down correctly, so there may be times where I say modem but I mean rom and visa versa. For the sake of this thread, I think I'm saying what I mean.
just install the new EL13 modem using odin... i hope you are rooted
ewalk4866 said:
it failed because you are rooted and dont have stock recovery anymore. so if you want to upgrade to EK02 you should just flash the update that is posted already for rooted phones its fast and easy to do.this is the link to get you right to the new modem. after you flash the modem upgrade just chose a rom that has also be upgraded too. now you have the new update its just that easy
http://forum.xda-developers.com/showthread.php?t=1352310
Click to expand...
Click to collapse
Thanks for your response but don't I still have the stock recovery? Crawlrj's odexed busybox rooted 3.0 rom didn't have any other recovery mods..
And I'd like to have the completely stock version of the EG30 ROM and the Modem.. So I should flash both? Wouldn't that erase my memory?
Skoksn,
I was using this thread and a few others to solve my problem which I think was similar to yours
[ACS][How to] EVERYTHING EK02 AND EG30 Android 2.3.6 Gingerbread
Step 1)
How to install ACSRecovery5 (EK02 Kernel):
http://www.youtube.com/watch?v=anjwB9mhn3Q
Step 2)
How to update to EK02 with Clockworkmod:
http://www.youtube.com/watch?v=N80j39tk7fE
Step 3)
How to install the EK02 Modem:
http://www.youtube.com/watch?v=5VDxEnO1tow
I did these 3 things in this order and I'm now on 2.3.6 and EK02 Modem. Hope this helps.
so i rooted my Sprint galaxy s3, Currently i have clockworkmod with a phantom "blazer". My question is why cant i update my phone? i have baseband version ending in lg2, when the update came out already which ends in lg4? my phone tried giving me the update but when i started the update it wouldnt go through? am i suppose to change the recovery back to stock? I just dont want to miss out on the jellybean update. Will i have to go back to factory?
ps. the "blazer" rom is super fast!!!!
mandosgs3 said:
so i rooted my Sprint galaxy s3, Currently i have clockworkmod with a phantom "blazer". My question is why cant i update my phone? i have baseband version ending in lg2, when the update came out already which ends in lg4? my phone tried giving me the update but when i started the update it wouldnt go through? am i suppose to change the recovery back to stock? I just dont want to miss out on the jellybean update. Will i have to go back to factory?
ps. the "blazer" rom is super fast!!!!
Click to expand...
Click to collapse
Baseband only refers to the modem. If you search the development threads, you will find zips to update the modem in clockwork.
As for stock updates, they require the stock recovery to work so if you have clockwork or twrp recovery installed, you will have to go back to stock to receive the ota updates.
Finally on the Jellybean update, you won't miss it. When released, I'm sure the awesome Devs here will pick it up and it would only be a matter of time before a custom rom is released. The benefits of running 'custom' far outweigh anything that releases 'stock'.
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
anaylor01 said:
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
Click to expand...
Click to collapse
If you don't need a specific feature from the stock firmware (gestures, wifi calling, etc), just get CM or AOKP and save yourself a headache.
Best? As far as stock? I've read LI6 is decent.
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
anaylor01 said:
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
Click to expand...
Click to collapse
3.0 wasn't even for phones. If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery. Just use a jellybean ROM.
Sent from my SGH-T999
joshnichols189 said:
If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery.
Click to expand...
Click to collapse
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Aerowinder said:
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Click to expand...
Click to collapse
I don't know, clockworkmod is supposed to block the installation of OTA updates.
Sent from my SGH-T999
Hmm, I'm using 6.0.1.2, and it does ask me if I want to disable /system/etc/install-recovery.sh, when I try to exit.
I'm currently on a Sprint GN2, v4.1.2, with Baseband L900VPAMA7 and Build JZO54K.L900VPAMA7. Shortly after getting the phone a year ago, I rooted via the Odin method and left the ROM as stock. I have not changed or updated it since. When I have tried to update it with the earlier OTA update from earlier this year, I couldn't due to (I believe) the fact that I have the TWRP recovery and not stock.
With 4.3 hitting, I really would like to get it updated properly. I have been scouring several sites, including XDA, but haven't been able to really answer my questions, which are:
1. Do I need to worry about the earlier OTA update if I get the 4.3 update?
2. Was the earlier OTA update, the update that would have gotten me to a MC2 baseband?
3. Lots of folks talking about Knox files and removing them. Why?
4. For either update, it seems that I have to switch back to the stock recovery, is this correct? But do I need to actually do anything with the ROM itself?
5. And finally, if I have to change back to the stock recovery, how? So many of the how to vids/threads talk about doing both rom and recovery.
Thanks in advance. Oh, and I have found and tried to read through several links on these questions such as:
http://forum.xda-developers.com/showthread.php?t=2086769
http://www.andromods.com/unroot-loc...estore-stock-no-root-reset-flash-counter.html
http://forum.xda-developers.com/showthread.php?t=2240961
http://forums.androidcentral.com/sa...print-guide-how-root-unroot-sprint-note2.html
http://galaxynote2root.com/galaxy-n...ootunbrick-galaxy-note-2-with-stock-firmware/
Would like to know about it too, can find a way to update to MK4
Hi,
I am on E980 ATT 4.1.2 stock. I have unrooted and also installed CWM 6.0.4.7.
I haven't yet gotten a notification for an upgrade to KK, but I am wondering.
#1 If I upgrade over the air, will it brick my phone since it's rooted and has a custom recovery?
#2 If I do want to upgrade, what's the best method for upgrading and will I have to unroot and remote CWM?
Thanks
badnaam said:
Hi,
I am on E980 ATT 4.1.2 stock. I have unrooted and also installed CWM 6.0.4.7.
I haven't yet gotten a notification for an upgrade to KK, but I am wondering.
#1 If I upgrade over the air, will it brick my phone since it's rooted and has a custom recovery?
#2 If I do want to upgrade, what's the best method for upgrading and will I have to unroot and remote CWM?
Thanks
Click to expand...
Click to collapse
Hi there,
several manufacturers and providers do not send or cannot send the updates because of certain rooting means.
If you see the window with message: "No updates available for your device." or "The latest updates have already been installed.", then you will receive the updates inspite of root access.
But you must flash a stock recovery before or even flash the whole stock ROM. Via custom recovery and rooted ROM stock updates cannot succeed.
Mine was rooted with stock recovery and the upgrade process went fine this week. Since you're on CWM recovery I'd say don't do it. When the last upgrade came out and I was running a custom recovery and it boot looped my phone (as well as everyone else's phones).
As best I know your only option is to restore phone to stock and take upgrade, then root, install recovery and all your apps/settings. Its a beeyotch right?