Develop Bugs

Touchscreen not working on stable CM9 FXP133

I installed the stable cm9..flashed the fxp133 kernel..the installation went smooth but my screen touch function is lost..Any ideas??
Eventually restoring to the stock kernel with JJ hybrid..and yeah the touch is working with this one. So is the problem cos of the kernel or the ROM??
I ll tell the sequence which i followed..let me know where i went wrong..i downloaded the ROM, extracted the boot.img, copied the original cm9 zip into the root of SD..used fastboot mode of flashtools to flash the kernel boot.img..then went into CWM..wiped out SD data..then cache..and then dalvik..and then proceeded to install zip from sd..it installed fine..and then i rebooted..it showed d FXP kernel logo and then CM9 bootscreen and then it loaded like it should..BUT the touchscreen isnt working at all..the hardware keys-power and back i checked were working but not the touchscreen..
Where did I go wrong..i am on baseband -72..bootloader unlocked..

You've installed correctly. Possibly a corrupt download, try re-downloading the zip.

sinkster said:
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
Click to expand...
Click to collapse
I downloaded both official stable CM9 as well as the FXP one on uploaded.to...tried with each of them but with the same result..both cant be corrupt n it wouldnt have extracted if it was a corrupt download anyways..m still wondering whats wrong..
Also I flashed doomkernel and tried installing..again the same..touchscreen still doesnt work..aarghh..

Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium

I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app

Braayhaan said:
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
Click to expand...
Click to collapse
iwarind said:
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Wiping battery stats does nothing to your phone. It doesn't change anything, it doesn't affect anything. It cannot be the problem.

Then what do u think the problem is..infact the installation works fine so i think i m not messing up anything on that front..
Sent from my LT18i using xda app-developers app

Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.

I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?

freakin.ro said:
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
Click to expand...
Click to collapse
I have Arc S..n i did try wid doomkernel as well..same result..

sinkster said:
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
Click to expand...
Click to collapse
I had stock ics rom only when i started..n again have gone back to the same now..i tried it a no of times..but the problem persists..

Need a new kernel for wildfire s

Hey guys i need a new kernel i tryed to install a jb rom with dat2sd on it and now cwm recovery dont work an the rom says android phone force closed over n over again could somone suggest a good kernel for me to use please its my daughters phone that i got her for christmas please help me
Sent from my GT-I9100 using xda premium

Most probably It's coz of your data2sd script. Most of the latest JB ROMs are using eoghan's kernel which is the only one out there I guess right now.. So check your script again and flash the ROM.

I don't know which thread is the better to ask.
I got a problem on my phone now.
My phone can't flash any rom after I flashed the "[KERNELS]Cyanogenmod 7/9/10 I AOKP I Paranoid Android 2.54 V2.1".
I tried to flash the other kernel and other rom but same. What's wrong with my phone.
I can just restore the nannda backup file but many application does not came back and have to reistall the application.
Please let me know How to fix it.

What's the error? This cant happen after just flashing the kernel? Are you stuck in boot loop or something else??
Sent from my Wildfire S A510e using xda app-developers app

sukhjit321 said:
What's the error? This cant happen after just flashing the kernel? Are you stuck in boot loop or something else??
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Depends on a Rom. Always full wipe before flash the Rom.
Stop the HTC logo or Rom logo and instlation aborted and HTC logo bootloop.
I could flash the Paranoid Android but no Google play store and gapps did not work.
I just restored before change the kernel. Very strang things happened to my phone.
I don't know what's the problem?

mobilephone01 said:
Depends on a Rom. Always full wipe before flash the Rom.
Stop the HTC logo or Rom logo and instlation aborted and HTC logo bootloop.
I could flash the Paranoid Android but no Google play store and gapps did not work.
I just restored before change the kernel. Very strang things happened to my phone.
I don't know what's the problem?
Click to expand...
Click to collapse
Just to double check that you're doing it right, I'd suggest you follow these steps. Let's take a ICS rom for example Paranoid one.
>Wipe data (twice)
>Format System
>Format boot.
>Wipe battery stats.
>Wipe davlik
>Install the ROM.
>You can flash a kernel if you want as well right now (Optional)
>Install the GAPPS. (Remember that ICS, GB and JB all have different GAPPS. ) Download one from http://goo.im/gapps
>Reboot.
>Complete the setup and all.
>Boot back to recovery.
>Install any data2sd script if you want I prefer int2ext4+ or you can always use link2sd.
> wipe sdext2
>reboot.
> Done.

sukhjit321 said:
Just to double check that you're doing it right, I'd suggest you follow these steps. Let's take a ICS rom for example Paranoid one.
>Wipe data (twice)
>Format System
>Format boot.
>Wipe battery stats.
>Wipe davlik
>Install the ROM.
>You can flash a kernel if you want as well right now (Optional)
>Install the GAPPS. (Remember that ICS, GB and JB all have different GAPPS. ) Download one from http://goo.im/gapps
>Reboot.
>Complete the setup and all.
>Boot back to recovery.
>Install any data2sd script if you want I prefer int2ext4+ or you can always use link2sd.
> wipe sdext2
>reboot.
> Done.
Click to expand...
Click to collapse
Thank you for your advice but no luck.
can I delete everything from the internal memory and install new rom?

scouse83 said:
Hey guys i need a new kernel i tryed to install a jb rom with dat2sd on it and now cwm recovery dont work an the rom says android phone force closed over n over again could somone suggest a good kernel for me to use please its my daughters phone that i got her for christmas please help me
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
What model is it marvel or marvel c
Coz.. cm10 kernel is only for marvel
Sent from my HTC Wildfire S A510e using xda premium

Something wrong

Something is wrong with my willy! I flashed a new ROM and suddenly my soft-key HOME stopped working! Although it vibrates the phone but doesnt work! The other 3 works but my HOME one doesnt work! I tried to flash other ROMs but the problem still exists!

CallOfHonor100 said:
Something is wrong with my willy! I flashed a new ROM and suddenly my soft-key HOME stopped working! Although it vibrates the phone but doesnt work! The other 3 works but my HOME one doesnt work! I tried to flash other ROMs but the problem still exists!
Click to expand...
Click to collapse
Looks like a bad flash.By any chance are you using custom MTD partitions ?

Wasimk32 said:
Looks like a bad flash.By any chance are you using custom MTD partitions ?
Click to expand...
Click to collapse
Nope! Just the ROM and the gapps! First tried jordfaz CM9.1 and then MiniCM9! Same problem occurs! But I found out something strange! When I connect my PC to USB, then the HOME button works! But when I disconnect it, the problem reoccurs! Maybe something is wrong with the flashing! Will try again around 2-3 times then report about it!

CallOfHonor100 said:
Nope! Just the ROM and the gapps! First tried jordfaz CM9.1 and then MiniCM9! Same problem occurs! But I found out something strange! When I connect my PC to USB, then the HOME button works! But when I disconnect it, the problem reoccurs! Maybe something is wrong with the flashing! Will try again around 2-3 times then report about it!
Click to expand...
Click to collapse
I had this problem,may be you arent wiping everything or properly.

Wasimk32 said:
I had this problem,may be you arent wiping everything or properly.
Click to expand...
Click to collapse
I dont know what seems to be the problem! Just noticed that Google Store is also not there!

CallOfHonor100 said:
I dont know what seems to be the problem! Just noticed that Google Store is also not there!
Click to expand...
Click to collapse
ok try wiping everything again and do a reflash.This should solve your problem.

Wasimk32 said:
ok try wiping everything again and do a reflash.This should solve your problem.
Click to expand...
Click to collapse
Tried a couple of times already!! Could it be the problem of sd-ext??

CallOfHonor100 said:
Tried a couple of times already!! Could it be the problem of sd-ext??
Click to expand...
Click to collapse
I dont think so,are you wiping data,cache and dalvik cache ?
If nothing works,try downloading your rom again.

Wasimk32 said:
I dont think so,are you wiping data,cache and dalvik cache ?
If nothing works,try downloading your rom again.
Click to expand...
Click to collapse
OK, Im gonna try it!

HOME button even works in CWM! Well, gonna check in the ROM now!
Edit: Still not working! =(

Are you using minicm9? Because this rom is ported from x10 mini so there may be some bugs related to softkeys. Try flashing another rom.
One more thing does the home key work if you hold it?
Sent from my HTC Wildfire using xda app-developers app

AndroidAddiction said:
Are you using minicm9? Because this rom is ported from x10 mini so there may be some bugs related to softkeys. Try flashing another rom.
One more thing does the home key work if you hold it?
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
Nope! And not only MiniCM9, I also tried CM 9.1 of Jordfaz! But the problem is still there! =(

I had this issue few times but a simple reflash with full wipes always worked for me!
May be your rom didnt get copy properly on your card or some files in your rom went corrupt.

Wasimk32 said:
I had this issue few times but a simple reflash with full wipes always worked for me!
May be your rom didnt get copy properly on your card or some files in your rom went corrupt.
Click to expand...
Click to collapse
I dont think so...I have used the ROM before and the problem wasnt there at that time! But then I tried to flash the ROM again and the problem appears just like that!

CallOfHonor100 said:
I dont think so...I have used the ROM before and the problem wasnt there at that time! But then I tried to flash the ROM again and the problem appears just like that!
Click to expand...
Click to collapse
Nope,there should be some change.It wont happen just like that.Now follow these steps and see if it works.
-Reboot in recovery.
-wipe data/factory reset.
-wipe cache.
-wipe dalvik cache.
-flash rom.
-flash gapps(ICS ones strictly)!
-reboot your phone.

Wasimk32 said:
Nope,there should be some change.It wont happen just like that.Now follow these steps and see if it works.
-Reboot in recovery.
-wipe data/factory reset.
-wipe cache.
-wipe dalvik cache.
-flash rom.
-flash gapps(ICS ones strictly)!
-reboot your phone.
Click to expand...
Click to collapse
OK! Gonna try it right now!

Now it gets stuck in the bootanimation! Now it really is pissing me off!! [email protected] [email protected]

try doing the whole process again without gapps.

Wasimk32 said:
try doing the whole process again without gapps.
Click to expand...
Click to collapse
I really think something is wrong with the phone! I tried different kinds of ROMs!
Jordfaz's ROMs:
CM 9.1: soft-keys not working and Google Play is not there!
MiniCM9: same problem!
Non-Official CM9 of ErwinP:
Stucks at bootscreen!
RemPuzzle of kylon:
Stucks at white HTC screen!
AAAARGHHGHG!

ok i think this problem occurred to me due to custom mtd.It happned to me when i set system partition less than what rom takes.Increasing system size and then doing a reflash always worked with me.That's all i had to offer sadly.

Any 4.2.2 ROM makes my camera crash

Hello,
I'm sorry if this is a repost of any sort . I am currently running a 4.1.2 rom and as it turns out any 4.1.2 rom that I run will have a functioning camera for my phone. However whenever I try to flash any 4.2 .2 rom on my phone the camera ceases to run correctly. I'm flashing the rom with clockworkmod touch and I have also tried flashing a camera fix I found on xda. I have even tried using third party camera apps, but those don't work either. Can anyone try to point me in the right direction or even try to help me troubleshoot this thing??
Thanks in advance
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?

Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

xBeerdroiDx said:
i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?
Click to expand...
Click to collapse
I had just updated cwm to the latest touch version about a month ago. After that I was still on stock TW 4.1.1. Then, I tried flashing a 4.2.2 jellybam v7.6 and the camera stopped working so I flashed back to stock and the camera worked fine. I then tried flashing to the latest realease of CM 10.1 nightly
about 3 weeks ago but the camera didnt work so I flashed to 4.1.2 CSROM v1.4 then 1.5 and the camera worked fine. So I then tried CM10.0 4.1.2 and the camera still worked so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Cprager said:
Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I did and it still works. So it can't be a hardware issue. It has to do with how my phone flashes the software because I haven't seen anyone else having the same issues with the ROMS that I have been flashing.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

AaronYoLungz said:
so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Click to expand...
Click to collapse
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.

xBeerdroiDx said:
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.
Click to expand...
Click to collapse
Well before I flashed any rom I always wiped all user data, I wiped the cache and dalvik cache and in some cases I even formatted the system in advanced settings. In every case the camera never worked.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

If it could help, I can get a report of the crash... The only thing is I would need guidance on going about getting it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

i would back everything up. you have a working nandroid to fall back on?
then i would fully wipe the device and start over. you seem to be having problems with 4.2.2, not specifically aosp. it appears aosp and touchwiz 4.1.1 and 4.1.2 are working for you. correct? when transitioning android versions, its basically required to wipe everything in order to avoid issues. make sure you have the latest gapps for 4.2.2. that may be your problem right there.
in the event you choose to wipe and reflash a 4.2.2 rom,
- backup your files
- have a nandroid, the rom you want and gapps on a micro sd card.
- boot into recovery
- wipe data/factory reset
- wipe cache
- wipe dalvik
- format /system
- format /data + media
- flash rom from external sd card
- flash gapps from external sd card
- reboot and let your phone sit a few minutes then reboot again. check it out.
you wont get any ROM support from devs on your issues until you come from a complete wipe. a hassle to set everything up again but it will likely be your fix. if not, we can go a different direction.

Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

AaronYoLungz said:
Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted

xBeerdroiDx said:
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted
Click to expand...
Click to collapse
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.

AaronYoLungz said:
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.
Click to expand...
Click to collapse
what ROM and release did you end up flashing?

xBeerdroiDx said:
what ROM and release did you end up flashing?
Click to expand...
Click to collapse
ROM: cm-10.1-20130521-NIGHTLY-d2att
Gapps: gapps-jb-20130301-signed
EDIT: The problem described in the post#11 has always been the case

i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back

xBeerdroiDx said:
i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back
Click to expand...
Click to collapse
Should I remove Gallery4.apk and Gallery2.apk from /system/app?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be

xBeerdroiDx said:
You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be
Click to expand...
Click to collapse
Alright so I ended moving the gallery, then flashing the new camera app in CWM then wiped the cache and dalvik. No luck, so I tried restarting my phone, fixing permissions, and nothing worked. I then full wiped my phone and flashed Vanilla Rootbox, tested camera and it didnt work. It still said "Camera Error- Can't connect to camera" . . I flashed the camera zip provided followed by a cache and dalvik wipe but I got the same message. Following the above steps I did the exact same thing with AOKP and the exact same thing happened.
Is it possible that my phone just can't support 4.2.2?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Is it possible that an outdated version of Odin could be the problem?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Plz help..no major changes after i installed rom

Plz help frnds... I installed custom rom Gennxt rom mj4 666mb on my grand but I cant c major changes after installation. Many of the mentioned feature of rom didnt work for... My wallpaper too remained unchanged...hows dat possible. ...Nd can u people suggest me the best rom for my grand....

bewithsumit said:
Plz help frnds... I installed custom rom Gennxt rom mj4 666mb on my grand but I cant c major changes after installation. Many of the mentioned feature of rom didnt work for... My wallpaper too remained unchanged...hows dat possible. ...Nd can u people suggest me the best rom for my grand....
Click to expand...
Click to collapse
always keep that in mind that when you are installing a rom on any rom whether it is cm or stock or anything the first thing to do is
1 wipe cache partiiton
2 wipe factory reset
3 wipe dalvik cache
4 format system
5 format cache
6 format data { dont format sd card }
after these steps i can be sure that you wont have any problems further
try my method and flash the rom again

aditya rathee said:
always keep that in mind that when you are installing a rom on any rom whether it is cm or stock or anything the first thing to do is
1 wipe cache partiiton
2 wipe factory reset
3 wipe dalvik cache
4 format system
5 format cache
6 format data { dont format sd card }
after these steps i can be sure that you wont have any problems further
try my method and flash the rom again
Click to expand...
Click to collapse
Bro I have used same process as u mentioned... still same prblm...plz help

bewithsumit said:
Bro I have used same process as u mentioned... still same prblm...plz help
Click to expand...
Click to collapse
Plz also tell me which one the latest gen nxt rom or any other rom better than gen nxt rom...

GENNXT is stock based rom and its similar to stock rom
Sent from my GT-I9082 using Tapatalk

black87 said:
GENNXT is stock based rom and its similar to stock rom
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
^ This
Most differences between stock and GENNXT ROM is behind the scenes. So you can't tell any difference if you don't look hard enough.

THANX... BT WHICH ROM WOuLD BE THE BEST ROM.. STOCKROM OR GEN NXT ROM....
AND AFTER INSTALLING GEN NXT ROM I CANT SEE GMAIL AND OTHER APPS... SO PLZ HELP.....

Install it from Play store. GENNXT is bloat free rom, so its more lightweight
Sent from my GT-I9082 using Tapatalk

Thanx for reply....
Bt i hav another problem now..
I had backp of stock rom4.2.2 thani flashed gen nxt rom bt now i want to go back to stock. So i tried restoring from backp data bt im getting error md5 mismatch......plz help... What to do...

bewithsumit said:
Thanx for reply....
Bt i hav another problem now..
I had backp of stock rom4.2.2 thani flashed gen nxt rom bt now i want to go back to stock. So i tried restoring from backp data bt im getting error md5 mismatch......plz help... What to do...
Click to expand...
Click to collapse
Backup data in internal storage, then flash via ODIN
Sent from my GT-I9082 using Tapatalk

I.m not able to install gennex ROM...pls help me??
Sent from my GT-I9082 using XDA Premium 4 mobile app