Develop Bugs

[Q] FML...Should have left well enough alone.

So i somehow went hiroshima on my one x. I'll keep it short and simple. Had my BL unlocked but was running CWM recovery and the stock rom. Tried installing the cyanogenmod 9 and things went to hell after i flashed the boot.img. Now I am stuck at the white HTC screen. I read the disaster recovery but I am still having no luck. I relocked the bootloader and reflashed stock recovery then i tried using the ruu utility but it said that it didnt match and then rebooted with some developer text on the boot screen. I used the getvar command and it says:
version-main: 1.28.720.10
Before the blowup I had ran the OTA.I was on 1.26.720.10. This is the ruu i tried to reflash. I cant seem to find the 1.28.720.10. I also tried pulling the sys and boot img files from the temp directory and manually flashing, it gave an error.
as of right now i have the bootloader unlocked again and CWM recovery reinstalled so i can charge.
please help! $20 reward via paypal to the person that helps me get back to complete stock!
The worst part is i dont even want this damn phone...lol

Try this mate. If you can still get to bootloader and recovery it recoverable. I'd go back to stock so its as if you bought the phone, just to be safe. So...
Open cmd and CD to your fastboot file location. Plug phone in and...
First flash a stock boot.img from your stock.zip
fastboot flash boot boot.img
fastboot reboot-bootloader
fastboot erase cache
Then relock your bootloader.
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
Then run the RUU.
But make sure you have the correct one. So that includes region. If you started on 1.26 and you haven't done any OTA updates then you need 1.26 but with your region code.
Good luck!
Sent from my HTC One X using xda premium

i did do the ota to 1.28 before i blew it up. also, how do i find the right region code? WHen i searched google for the results of my getvar version-main i found a bunch of threads referring to that being the ota for india, so thats the ruu i downloaded from the fileshare. i was working off a hunch though.
Will I be able to use a 1.26 RUU if I updated to 1.28, seeeing as how my getvar says 1.28?

applejoos said:
i did do the ota to 1.28 before i blew it up. also, how do i find the right region code? WHen i searched google for the results of my getvar version-main i found a bunch of threads referring to that being the ota for india, so thats the ruu i downloaded from the fileshare. i was working off a hunch though.
Will I be able to use a 1.26 RUU if I updated to 1.28, seeeing as how my getvar says 1.28?
Click to expand...
Click to collapse
Yeah if you did the OTA you need to use the 1.28 RUU as your hboot will have updated along with either things so 1.26 won't work.
Sent from my HTC One X using xda premium

benjamin.j.goodwin said:
Yeah if you did the OTA you need to use the 1.28 RUU as your hboot will have updated along with either things so 1.26 won't work.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
So since there is no RUU matching my version number I am screwed now right?

Use the 1.29 ruu?

backfromthestorm said:
Use the 1.29 ruu?
Click to expand...
Click to collapse
there is no 1.29 for my region code.

applejoos said:
So since there is no RUU matching my version number I am screwed now right?
Click to expand...
Click to collapse
Do you know how to push a ROM.zip on to your SD card via command prompt?
Try downloading a custom ROM and flash the boot.img then, clear cache, then boot to recovery and flash the ROM. Then reboot. Should work.
Sent from my HTC One X using xda premium

[Q] need help to flash stock rom back on htc one x

ello guys.
i need help regarding installing back the stock rom on my One x . i bought the second hand phone few days back and its already unlocked and rooted with Android Revolution HD 18.0 custom rom running , somehow the phone is quiet unstable and rom crashes too often especially on restarting it displays the message "unfortunately process.com.android stoped working" or something like that. and it displays the same kind of message for every app when i try to open any app. i tried factory resets many time but to no aval.
pls guide me about the problem that this phone is having secondly pls tell me the correct Stock RUU for reverting back to the stock rom which i hope would solve the problem.
my phone's detail :
ENDEAVORU pvt ship S-ON
HBOOT 1.31.0000
CPLD none
MICROP none
Radio 5.1204.162.29
eMMC boot mode : disabled
CPU boot mode: disabled
HW secure boot : enabled
modem path : off
its CID is 11111111 ( i think its unbranded)
VERSION-MAIN : 3.14.401.619
i ve following queries
1. do i need to downgrade the hboot to install stock rom
2. how many digits of the version-main number should match with the RUU ... like i ve found one like (RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed (1).exe)
is it ok for my device???
3. anyother especial precaution i should take before attempting this procedure
thanks

To get CID, try
fastboot oem readcid
The RUU you posted is the latest for '401, I'm not sure why your build number of 619 is newer. Anyway that RUU comes with hboot 1.39 so it should install, although you may need to flash that firmware manually before the RUU.

Thanks for guiding me. I didn't understand what I need to flash manually before installing RUU? Plz elaborate as m noob to all these things.
Sent from my EndeavorU using xda app-developers app

To run a ruu you only have to lock the bootloader, you don't have to flash anything
Just put the phone in fastboot usb mode and do the command from the fadtboot folder on pc
Fastboot oem lock
After that leave the phone in fastboot usb mode and run the ruu from pc WITH admin rights !
If it fails you have to flash the firmware first like Ben said

I ve just reconfirmed the cid, its 11111111
I think its not carier locked as there is NO logo of any companies.
Sent from my EndeavorU using xda app-developers app

Thanks Mr Hofs
Plz tell me the RUU that I mentioned in first post is okay for my device?
N what does it mean to flash firmware manually before installing RUU?
Sent from my HTC one x using xda app-developers app

Well it might have to do something with the supercid you have ! But i think the ruu will work fine, charge the batt to full if you can. Always the best to start with a full batt so if you run into an error its easy to fix.....

Somewhere I read that unbranded phone when they are unlocked they show their cid like this one.
Ok I should now relock the bootloader with commands in fastboot and straightaway go to install this RUU? Is this a logical sequence now for me?
Sent from my EndeavorU using xda app-developers app

Yes just like i posted earlier ..... The ruu flashes back the stock recovery and boot.img.....

In case of failure like you said I need to flash firmware manually before installing RUU. What does that mean? Plz pardon me if its a stupid question as I am new at all this stuff.
Sent from my EndeavorU using xda app-developers app

Well that's Mr Pope's expertise if i am not mistaken, but if i get it right you have to flash a European 1.39 hboot firmware and after that the ruu again. But i think that it is not necessary, the only way we find out is to try

More i read greater are confusions
Do I need to extract stock recovery and stock boot.img from RUU and flash them before actually running RUU. As earlier mentioned steps are supposed to be done before re-locking and RUU has to be installed after re-locking.?
Sent from my EndeavorU using xda app-developers app

No just relock the bootloader and run the ruu from pc WITH admin rights and with the phone in fastboot usb mode

Ok thanks Mr Hofs I ll give it a try and let you know.
Sent from my EndeavorU using xda app-developers app

i went through like you suggested , ist relocked the bootloader than ran RUU one which is mentioned in my ist post ,, it started doing it initially ,,
erased the previus rom etc ,, than started sending data and finally after about 4 to 5 mins messaged appeared that the rom cant be updated pls choose correct one for this phone.
now i have relocked phone stuck at the bootloader and i dont know what to do ... pllllzzzzz help

First lets get a working phone back !
Unlock the bootloader
Fastboot flash unlocktoken unlock_code.bin
Flash the custom recovery back and flash a custom rom. Then at least you have a working phone. When i get home later this evening i can search more for a solution......
Maybe in the mean time you can find something on supercid with the search option ! :thumbup:

bsam46 said:
i went through like you suggested , ist relocked the bootloader than ran RUU one which is mentioned in my ist post ,, it started doing it initially ,,
erased the previus rom etc ,, than started sending data and finally after about 4 to 5 mins messaged appeared that the rom cant be updated pls choose correct one for this phone.
now i have relocked phone stuck at the bootloader and i dont know what to do ... pllllzzzzz help
Click to expand...
Click to collapse
plllsssss hhhhheeeelllppppp

bsam46 said:
plllsssss hhhhheeeelllppppp
Click to expand...
Click to collapse
Did you read my post, please stay calm. The phone is not bricked ......

Mr Hofs said:
Did you read my post, please stay calm. The phone is not bricked ......
Click to expand...
Click to collapse
Sorry m so nervous i didnt see your post. the problem is i dont have custom rom on the internal storage is there anyway to get phone back in working condition no mater what rom is running

Yes you can mount the sdcard within the custom recovery as a usb disk ! Mount it and copy over the desired Rom :thumbup:

[Q] The mysterious vanishing 5.1204.162.29

For the life of me I can't find the RUU for 5.1204.162.29 (unbranded HTC__621 Taiwan).
I'm trying to restore to stock but having a hard time about it. Before I throw this phone into my junk draw to be forgotten forever, I thought I might as well put out a call for help.
So. Help?

Do this fastboot command to get to the right ruu
Fastboot getvar version-main
Post the result please !

Mr Hofs said:
Do this fastboot command to get to the right ruu
Fastboot getvar version-main
Post the result please !
Click to expand...
Click to collapse
Whoops! This may make more sense.
version-main: 1.29.709.12

Download this file
http://bugsylawson.com/index.php/fi...97-radio-1120410414-release-259284-signedexe/
Put the phone in the boatloader and relock the bootloader (if its unlocked)
Fastboot oem lock
Then keep the phone in the bootloader and run the ruu with admin rights. Then perform all official ota's you can get within the phone menu - software updates :thumbup:

Mr Hofs said:
Put the phone in the boatloader and relock the bootloader (if its unlocked)
Fastboot oem lock
Then keep the phone in the bootloader and run the ruu with admin rights. Then perform all official ota's you can get within the phone menu - software updates :thumbup:
Click to expand...
Click to collapse
Cheers, but I've tried this file before and I come up with an error 155.
Reconfirming what I've done:
charged phone to 100%
relocked bootloader.
plugged into PC (windows 8)
run RUU with admin rights
RUU does its thing for a few minutes and then comes up with error 155.

Try it on a windows 7 machine !

Mr Hofs said:
Try it on a windows 7 machine !
Click to expand...
Click to collapse
Just did - gave me an error 170 this time. I tried with multiple cables and USB ports.

Maybe the 2.17 ruu will work
Edit : I don't see the 2.17 only a 3.14 here
http://forum.xda-developers.com/showthread.php?t=2189048

Mr Hofs said:
Maybe the 2.17 ruu will work
Edit : I don't see the 2.17 only a 3.14 here
ah well. no worky. time to go in the junk drawer!
Click to expand...
Click to collapse

Well if the ruu gives you an error you could always find the ROM.zip file located in your temp folder and flash it via fastboot.
Sent from my HTC One X using xda app-developers app

Otherwise you can flash the standalone JB firmware and restore a "new" nandroid backup.

One X boot loop, PLease Help!

Hello Everyone,
I just got my Tegra 3 One X yesterday, charged it for a few hours and then turned it on. Then installed a few apps, some of wich i couldn´t find in the phone after installed. Then i updated the software, the cellphone rebooted and it was ok. Then i updated the Sense, and started to boot loop.
In the hboot i tried both the recovery and the factory reset, but immediately after press the power button it start to boot loop again. Don´t know what to do, i can´t acces the phone with the Sync.
In the hboot screen appear Locked and S-off.
Thanks for your help..
Regards

Christianluer said:
Hello Everyone,
I just got my Tegra 3 One X yesterday, charged it for a few hours and then turned it on. Then installed a few apps, some of wich i couldn´t find in the phone after installed. Then i updated the software, the cellphone rebooted and it was ok. Then i updated the Sense, and started to boot loop.
In the hboot i tried both the recovery and the factory reset, but immediately after press the power button it start to boot loop again. Don´t know what to do, i can´t acces the phone with the Sync.
In the hboot screen appear Locked and S-off.
Thanks for your help..
Regards
Click to expand...
Click to collapse
bootloader status LOCKED and S-off how ?r u sure its tegra ? in the bootloader before S-OFF what is written EVITA or ENDEAVORU? ?

ll_r1d0_ll said:
bootloader status LOCKED and S-off how ?r u sure its tegra ? in the bootloader before S-OFF what is written EVITA or ENDEAVORU? ?
Click to expand...
Click to collapse
It says, ENDEAVORU XE SHIP S-OFF RL

Cool another XE ! A solution is to flash the 3.14 JB firmware and then the 3.14.401.31 ruu to get to a stock rom.
If you wish different let me know.

Mr Hofs said:
Cool another XE ! A solution is to flash the 3.14 JB firmware and then the 3.14.401.31 ruu to get to a stock rom.
If you wish different let me know.
Click to expand...
Click to collapse
Thanks! I really appreciate your help, it sounds really easy, but i´m a n00b in this.
What do i need to do?

Do i need to follow these steps?
http://forum.xda-developers.com/showthread.php?t=1995945

First I need to know what hboot version you have ? Check the bootloader for the number

mr hofs said:
first i need to know what hboot version you have ? Check the bootloader for the number
Click to expand...
Click to collapse
hboot- 1.12.0000

You need to do this
http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
Rename it to firmware.zip
Relock the bootloader :
Fastboot oem lock
Then go into ruu mode with these commands :
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
(Maybe 2-3 times needed)
Then reboot the phone and check if the bootloader has changed to 1.39
After the above you run the JB RUU
http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
then you are on the updated jellybean software.

161.3 marquil
Mr Hofs said:
You need to do this
http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
Rename it to firmware.zip
Relock the bootloader :
Fastboot oem lock
Then go into ruu mode with these commands :
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
(Maybe 2-3 times needed)
Then reboot the phone and check if the bootloader has changed to 1.39
After the above you run the JB RUU
http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
then you are on the updated jellybean software.
Click to expand...
Click to collapse
After "Fastboot flash zip firmware.zip", says "remote:battery low", the same problem that i had trying to do other things, it seems that the battery is not charging.

The battery only charges inside a custom recobery or when the phone is off.
I have a script that you can run from the fastboot folder. It will continuesly reboot the phone and charge it little by little and after a while you are able to flash again.
http://db.tt/aLqeTpPO

Mr Hofs said:
The battery only charges inside a custom recobery or when the phone is off.
I have a script that you can run from the fastboot folder. It will continuesly reboot the phone and charge it little by little and after a while you are able to flash again.
http://db.tt/aLqeTpPO
Click to expand...
Click to collapse
I think the battery is at its full capacity (3771 mV). I did the "Fastboot oem rebootRUU " and it was Ok,
got the screen black with the hTC symbol in the middle. Then i did the "Fastboot flash zip firmware.zip "
first time i got "remote:13 battery low", did it again and got "remote: 00000008", did it again and got stuck on "sending zip (12876 KB)" for a while and now says "Failed (data transfer failure (Too many links))"

Battery full cap is at 4200. I would charge it more.

Mr Hofs said:
Battery full cap is at 4200. I would charge it more.
Click to expand...
Click to collapse
Charged till 4050 now and got this;

Hmm can you post the outcome of :
Fastboot getvar version-main

Mr Hofs said:
Hmm can you post the outcome of :
Fastboot getvar version-main
Click to expand...
Click to collapse
Version main: 2.17.401.2

Weird....then it should work ! Didn't forget to relock the bootloader ?

Mr Hofs said:
Weird....then it should work ! Didn't forget to relock the bootloader ?
Click to expand...
Click to collapse
I don´t think so

Hmm...weird i helped another XE device exactly the same way a few days ago !
Try the 3.14.401.31 ruu which you can download from here
http://forum.xda-developers.com/showthread.php?t=2189048

Mr Hofs said:
Hmm...weird i helped another XE device exactly the same way a few days ago !
Try the 3.14.401.31 ruu which you can download from here
http://forum.xda-developers.com/showthread.php?t=2189048
Click to expand...
Click to collapse
I already downloaded it, you told me, together with the firmware.
I just install it in fastboot mode, from windows?

[SLVD]HTC ONE X stuck on black screen & fastboot detection problem & charging problem

[SLVD]HTC ONE X stuck on black screen & fastboot detection problem & charging problem
Hello friends,
I tried to update my HTC one x hboot 1.12 to official jb manually.. as i didnt notice my hboot, my update got stuck in malfunction and i finally ended in bootloop and sometimes black screen.
Now My problem is... FASTBOOT USB is not recognised in my pc (wind 7 32-bit)
(i managed it by manually using adb commands rather the toolkit)
Now when i tried to flash a hboot upgrade through RUU, I get remote: battery low error.
HELP! HELP!! HELP!!!
Will RUU mode charges my mobile? i plugged the charger in fastboot mode but it dosn't... :'(

The battery only charges with the battery script for that you need fastboot ! Or inside a custom recovery.
Try fastboot on another pc or try to uninstall and reinstall HTC syncmanager and it's drivers
https://www.dropbox.com/s/aaah8gqz8j024xz/Batt script.bat
Batt script in the fastboot folder and start it with admin rights.

Mr Hofs said:
The battery only charges with the battery script for that you need fastboot ! Or inside a custom recovery.
Try fastboot on another pc or try to uninstall and reinstall HTC syncmanager and it's drivers
https://www.dropbox.com/s/aaah8gqz8j024xz/Batt script.bat
Batt script in the fastboot folder and start it with admin rights.
Click to expand...
Click to collapse
my bootloader is relocked, is it possible to run the bat file *you gave* in fastboot?

i started the bat file, it stated getvar battery voltage something, then reboots, again the samething repeats... What should i do now?

Ah cool it works. Leave it running until you reach 3800-3900 mV then unlock it and flash a custom recovery to charge the battery more up in there.
Give me the outcome of
fastboot getvar version-main

Mr Hofs said:
Ah cool it works. Leave it running until you reach 3800-3900 mV then unlock it and flash a custom recovery to charge the battery more up in there.
Give me the outcome of
fastboot getvar version-main
Click to expand...
Click to collapse
Mobile is out of charge.. will share the getvar version soon.... Can you give a link to the guide to flash htc__038 RUU, hboot 1.12...i want a complete guide because im exhausted on searching....

A guide for a ruu, sure no problem. Do you have the correct ruu then ?
Install a ruu :
1: put the phone in the bootloader and relock it (if it's unlocked)
2: keep the phone in fastboot usb mode
3: execute the ruu with admin rights by right mouse button clicking it and select
Run as administrator
That's all

Mr Hofs said:
A guide for a ruu, sure no problem. Do you have the correct ruu then ?
Install a ruu :
1: put the phone in the bootloader and relock it (if it's unlocked)
2: keep the phone in fastboot usb mode
3: execute the ruu with admin rights by right mouse button clicking it and select
Run as administrator
That's all
Click to expand...
Click to collapse
HTC__038 - RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.29.720.11_Radio_1.1204.105.14_release_261615_signed
This that correct RUU for ics?
Actually i want to JB Update...Trying on that only i got messed up.
Any suggestion?
Mine is HTC__038 hboot 1.12
(NOW I'm CHARGING MY MOBILE ON TWRP, its showing 30%+ and its charging i think) REALLY you saved my phone MAC. MANY thanks to you because i couldn't find a solution for it.

Ics hboot 1.12 is a 2.17 ruu minimal. Try this link and if you fail to get it we do it via a stock backup
http://rapidsharemix.com/?q=ruu+endeavor+u+ics+40+htc+asia+india+2.17.720

Mr Hofs said:
Ics hboot 1.12 is a 2.17 ruu minimal. Try this link and if you fail to get it we do it via a stock backup
http://rapidsharemix.com/?q=ruu+endeavor+u+ics+40+htc+asia+india+2.17.720
Click to expand...
Click to collapse
I dont know which one to choose MAC, Can you could share the link alone.... Im confused on those links...

MAC found RUU 2.17 from this LINK. The third RUU, Is that the file correct?

If it's 2.17.720 it will be fine
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_275355_signed.exe

Mr Hofs said:
If it's 2.17.720 it will be fine
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_275355_signed.exe
Click to expand...
Click to collapse
Then im right, Downloading it right now, my mobile on charge(64%)... once charged gonna run it..
Can i get additional information about upgrading hboot. what hboot is required to flash stock JB?

At least get to 1.36/1.39. If it goes higher it's no problem.

My problems (SOLVED)
1. Fastboot not detected (SOLVED: try manually commanding rather using tootlkit)
2. Charge problem (SOLVED: with the help of Recognized Contributor Mr Hofs )
Mr Hofs Im floored on your great help. THANK YOU THANK YOU THANK YOU

No problem buddy, enjoy. But don't forget to make a nandroid backup when you decide to try out custom roms
Cheers
CASE CLOSED !

Mr Hofs said:
No problem buddy, enjoy. But don't forget to make a nandroid backup when you decide to try out custom roms
Cheers
CASE CLOSED !
Click to expand...
Click to collapse
Thats the mistake i made...
MISTAKE CORRECTED :cyclops:

MAC can i get the hboot file for htc__038. i want hboot for JB stock rom

Once you ran the ruu successful you search for official ota and install them

Mr Hofs said:
Once you ran the ruu successful you search for official ota and install them
Click to expand...
Click to collapse
Official OTA not working MAC, now my hboot is 1.36, any JB RUU.... if not possible is it possible to dowgrade hboot and again flash the ICS RUU?