Develop Bugs

Note 2 freezing while screen off

Hey guys, every time i cut my screen off it freezes when off for longer than a few seconds. I haven't flashed anything not made for my phone and ibve tried it on two different ROMs but it still does it. I've even tried neak kernel and Perseus. Im not sure what is going on. The last ROM i flashed was the newest build of MIUI India. Also not sure if it matters but when i flash i factory reset, then clear cache, dalvik, and system, and then format data. Any help is appreciated. Thanks

I have the samle problem !!! please help me
i installed the miui-inda and everytime when i press the standyby button the phone freezes.
Installed 3 Roms and it doesnt work every time the Screen freeze.

I have the same problem, no one here can help us with it apparently...
what you need to do is root the device, instal triangle away to remove the flash counter, then flash a stock rom and take it to samsung, im doing this today..

Thanks suleman for pm me about this,
Its kernel issue, change kernel
1.flash rom
2. Reboot
3. Flash kernel
Sent from my MI 2 using Tapatalk 2

Same here,what can I do ? And I can't connect by usb!:crying:
this all happened after i flashed MIUI India

same here...
this is boom problem to all?
no conect usb to pc, no sleep screen, phone dont back...
and try flash to odin pc, a see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
flash only mobile odin.

same here flashed stock rom via Odin and still my phone hangs
can not connect to laptop via usb bluetooth not working
phone hangs
this all happened after i flashed MIUI India
plz help

gitin said:
same here flashed stock rom via Odin and still my phone hangs
can not connect to laptop via usb bluetooth not working
phone hangs
this all happened after i flashed MIUI India
plz help
Click to expand...
Click to collapse
Unfortunately same here. I would not want to point at specific ROM but this happened after flashing of MIUI INDIA 2.12.28. The phone started to laggy like a hell and I am unable to connect through USB. PC always wnants 7 CDCs Drivers. This could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in some SGS3 thread. But you will probably need to do it every boot =(((. PLEASE someone from DEVs help us. I am close to have heart attack!
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
gh.rohit said:
Thanks suleman for pm me about this,
Its kernel issue, change kernel
1.flash rom
2. Reboot
3. Flash kernel
Sent from my MI 2 using Tapatalk 2
Click to expand...
Click to collapse
I have flashed stock through ODIN but it is the same ...laggy and freezing randomly.

Haddar said:
Unfortunately same here. I would not want to point at specific ROM but this happened after flashing of MIUI INDIA 2.12.28. The phone started to laggy like a hell and I am unable to connect through USB. PC always wnants 7 CDCs Drivers. This could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in some SGS3 thread. But you will probably need to do it every boot =(((. PLEASE someone from DEVs help us. I am close to have heart attack!
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
I have flashed stock through ODIN but it is the same ...laggy and freezing randomly.
Click to expand...
Click to collapse
thanks 4 ur help, but connecting usb is not just the only thing
the phone is freezing like hell blutooth not working its all messed up, never experienced any problem with any other rom ever.
even i was about to get an heart attack, but i saw a post here:
http://forum.xda-developers.com/showthread.php?t=2060884&page=18
m downloading that file and hoping it will revive my phone
but unfortunately speed here is really slow
but you can check it out and leave ur review if that worked
thanks

i download RESCUE FIRMWARE SGNII N7100 now, i buy premium account hotfile, my god, wonking in my phone...
---------- Post added at 01:38 PM ---------- Previous post was at 01:15 PM ----------
good news
all work, usb now ok, no freezing in stock rom....
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
log odin]<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
with custom rom all ok...

Sorry for trouble guys....

gh.rohit said:
Sorry for trouble guys....
Click to expand...
Click to collapse
Im sure its fixable! Im going to try the emergency firmware thing and update everyone soon.

henrique araujo said:
i download RESCUE FIRMWARE SGNII N7100 now, i buy premium account hotfile, my god, wonking in my phone...
---------- Post added at 01:38 PM ---------- Previous post was at 01:15 PM ----------
good news
all work, usb now ok, no freezing in stock rom....
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
log odin]<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
with custom rom all ok...
Click to expand...
Click to collapse
To everyone with this problem after flashing MIUI india's newest build, i can confirm that this DOES fix it. Thanks everyone for the help!

I never used the MIUI india's, my problem was caused by other reasons

It was modem issue, now its fixed
Uploading new version

still not fix
i just test miui india 2.1.3, problem with turn off screen freezing still not fix.

cuonghero50 said:
i just test miui india 2.1.3, problem with turn off screen freezing still not fix.
Click to expand...
Click to collapse
Because you are on same modem
Sent from my MI 2 using Tapatalk 2

plz help.
Thank for reply, can you point me to which modem should i used to fix this problem. How to remove modem from zip file.

Thank god back on RevolutionHD 6.0!

cuonghero50 said:
Thank for reply, can you point me to which modem should i used to fix this problem. How to remove modem from zip file.
Click to expand...
Click to collapse
Flash any other rom which have modem.bin
Sent from my MI 2 using Tapatalk 2

Help me.. my phone suddenly fault. :(

Hye all there! please help me.. im using samsung galxy note 2 gt-n7100.
my phone was hang, and after i switch off the phone and try to turn on it again,
only this screen is showing:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i want to restore the firmware using samsung kies but its not detected.
but this phone can enter to the download mode, i was tried to restore using odin, its also cant!
this is the odin status:
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019>
<ID:0/019> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
this is odin status on 2nd try.
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
please help me friend...

theviper0308 said:
Hye all there! please help me.. im using samsung galxy note 2 gt-n7100.
my phone was hang, and after i switch off the phone and try to turn on it again,
only this screen is showing:
i want to restore the firmware using samsung kies but its not detected.
but this phone can enter to the download mode, i was tried to restore using odin, its also cant!
this is the odin status:
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019>
<ID:0/019> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
this is odin status on 2nd try.
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
please help me friend...
Click to expand...
Click to collapse
this generally happens on flashing different variant's ROM..i read a similar post whr a guy flashed different rom and ended up with the same situation.
What is ur model number?check in About device

mannyvinny said:
this generally happens on flashing different variant's ROM..i read a similar post whr a guy flashed different rom and ended up with the same situation.
What is ur model number?check in About device
Click to expand...
Click to collapse
my phone model number : samsung galaxy note 2 gt-n7100
i've check the imei number this phone is from vietnam.
i think my phone is faulty. ive search many forum and found the result showing this problem name 'sudden death syndrome'.

theviper0308 said:
my phone model number : samsung galaxy note 2 gt-n7100
i've check the imei number this phone is from vietnam.
i think my phone is faulty. ive search many forum and found the result showing this problem name 'sudden death syndrome'.
Click to expand...
Click to collapse
I too thought that its a sds case! Now nothing can be done my friend,service center is the last option
Sent from my AweSoMe ?♥Note2♥?

[Q] Help, i'm out of ideas.

Good afternoon,
I'm trying to repair a smartphone for a friend of mine. He said he didn't updateted the phone when the phone was asking for it and that broke the phone (we know better but alright.:good. The phone is stuck at the samsung logo with that blue animation. I already tried flashing stock rom via odin and kies. But it's still stuck at the samsung logo, also I noticed the bootup sound is corrupt (it doesn't fully finish.). Then I tried rooting the phone and flashing cyanogenmod via cwm but it still wouldn't boot.
Photo of Odin output.:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Odin message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> BOOTLOADER-I535VRALF2-618049-REV09-user-low-ship.tar-2-.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!)
I ofcourse also tried flashing things seperatly.
At first I had an 'unable to write to NAND error' in Odin.
Plz help.
PS, Sorry for my english, english is not my native language
PPS, Oh and may the thread be placed in the regular SIII help and troubleshooting?, I have the international SIII version.. (My bad :S)

I see i9300 in the progress log. This forum is for the i747 and i747m, not the i9300.
Are you flashing the right firmware?

audit13 said:
I see i9300 in the progress log. This forum is for the i747 and i747m, not the i9300.
Are you flashing the right firmware?
Click to expand...
Click to collapse
I have accidently misplaced this thread. I have an I9300 and I used the i9300 international firmware. I possibly have a corrupt Nand memory thingy.

recovering partition grand duos smartphone. Help Help

guys increased the memory of my grand duos looking first tutorial here forum, and happened all right, that now being tried back Stock ROM and when you start the error. and back to the original patition colleagues?

Lucas0Neto said:
guys increased the memory of my grand duos looking first tutorial here forum, and happened all right, that now being tried back Stock ROM and when you start the error. and back to the original patition colleagues?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=55294512&postcount=6
you can't go back to stock unless you reset the partition table
try the link above

to do this tutorial get this error
Yousef Mohamed said:
http://forum.xda-developers.com/showpost.php?p=55294512&postcount=6
you can't go back to stock unless you reset the partition table
try the link above
Click to expand...
Click to collapse
I did the procedure as stated in the tutorial and still continued receiving the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMK3_I9082ODDBMJ1_I9082DDUBMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Lucas0Neto said:
I did the procedure as stated in the tutorial and still continued receiving the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMK3_I9082ODDBMJ1_I9082DDUBMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
May be the Baffin.pit file is corrupted , Re-download it and try again

pass me your baffin.pit file
redid the process 2 times with the downloaded file 2 times and still the error could have your baffin.pit file

Did you try to flash the Stock without The pit file then flash the bit file alone and after that flash the stock alone
1. flash the stock
2. Flash the pit
3. Flash the stock again
I know it seems silly but try it

theory or skype whatsapp, could leave here

Yousef Mohamed said:
Did you try to flash the Stock without The pit file then flash the bit file alone and after that flash the stock alone
1. flash the stock
2. Flash the pit
3. Flash the stock again
I know it seems silly but try it
Click to expand...
Click to collapse
I keep getting the same error

That's what happens when I try to go up the system after flashing the rom 2 TIMES

Help!! Have I killed my phone? Can it be fixed?

A few weeks ago, my phone was stuck on Samsung Logo. Having read through several threads on the subject, I attempted flashing though Odin but despite following all instructions, my phone is now stuck on a screen that says: "Firmware upgrade encountered an issue. Please select recory mode in Kies & try again." (pic attached).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I press volume up & power & home, I do get to "Downloading ... Do not turn off target" but can't seem to progress beyond this.
I must say, I have only ever attempted one flash before a few years ago and I am not the brightest spark when it comes to understanding what I'm doing even though I am good at following instructions but any help with this would be greatly appreciated and welcomed.
Thanks
Tried Odin again - message I get is:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SC02EOMALJF_SC02EDCMALJF_SC02EOMALJF_HOME_REV04_user_low_true.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Are you using the original Samsung USB cable? Have you tried different USB cables, USB ports, ROMs, and operating systems?