Develop Bugs

don't back after sleep

already have a couple of days, started from scratch, after the 30 seconds, the screen goes to sleep normal, but then she did not return, and when asleep and unit does not receive calls, it is as if turned off, I have to keep it tight to restart power.
I'm now with the rom hyperdroid 1.3, which is AOSP, and it gets a little more stable, but only leaving the wi-fi off.
Another detail is that the usb, it just loads, not appearing on my computer the shortcut to the phone.
also there is another thing, this very Lagado, the boot animation keeps crashing and messing with the device too ...
Anyone know anything?

problem solved
i download RESCUE FIRMWARE SGNII N7100 now, i buy premium account hotfile, my god, wonking in my phone...
---------- Post added at 01:38 PM ---------- Previous post was at 01:15 PM ----------
good news
all work, usb now ok, no freezing in stock rom....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
log odin]<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
with custom rom all ok...

Wow that must have been really scary haha. I don't know what I'd do if my baby didn't turn on! Haha. Regardless I'm glad you got it all figured out. Salutations
Sent from my GT-N7100 using Tapatalk 2

****ING HELL
i wish i would see this thing before sending my phone off to samsung today... ive had this problem for the past 2 days and no one could help me =[

it's a shame, I despaired when he began to have problems, until I sent an email to the seller, but fortunately everything was resolved.

[Q] Help, i'm out of ideas.

Good afternoon,
I'm trying to repair a smartphone for a friend of mine. He said he didn't updateted the phone when the phone was asking for it and that broke the phone (we know better but alright.:good. The phone is stuck at the samsung logo with that blue animation. I already tried flashing stock rom via odin and kies. But it's still stuck at the samsung logo, also I noticed the bootup sound is corrupt (it doesn't fully finish.). Then I tried rooting the phone and flashing cyanogenmod via cwm but it still wouldn't boot.
Photo of Odin output.:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Odin message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> BOOTLOADER-I535VRALF2-618049-REV09-user-low-ship.tar-2-.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!)
I ofcourse also tried flashing things seperatly.
At first I had an 'unable to write to NAND error' in Odin.
Plz help.
PS, Sorry for my english, english is not my native language
PPS, Oh and may the thread be placed in the regular SIII help and troubleshooting?, I have the international SIII version.. (My bad :S)

I see i9300 in the progress log. This forum is for the i747 and i747m, not the i9300.
Are you flashing the right firmware?

audit13 said:
I see i9300 in the progress log. This forum is for the i747 and i747m, not the i9300.
Are you flashing the right firmware?
Click to expand...
Click to collapse
I have accidently misplaced this thread. I have an I9300 and I used the i9300 international firmware. I possibly have a corrupt Nand memory thingy.

recovering partition grand duos smartphone. Help Help

guys increased the memory of my grand duos looking first tutorial here forum, and happened all right, that now being tried back Stock ROM and when you start the error. and back to the original patition colleagues?

Lucas0Neto said:
guys increased the memory of my grand duos looking first tutorial here forum, and happened all right, that now being tried back Stock ROM and when you start the error. and back to the original patition colleagues?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=55294512&postcount=6
you can't go back to stock unless you reset the partition table
try the link above

to do this tutorial get this error
Yousef Mohamed said:
http://forum.xda-developers.com/showpost.php?p=55294512&postcount=6
you can't go back to stock unless you reset the partition table
try the link above
Click to expand...
Click to collapse
I did the procedure as stated in the tutorial and still continued receiving the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMK3_I9082ODDBMJ1_I9082DDUBMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Lucas0Neto said:
I did the procedure as stated in the tutorial and still continued receiving the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMK3_I9082ODDBMJ1_I9082DDUBMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
May be the Baffin.pit file is corrupted , Re-download it and try again

pass me your baffin.pit file
redid the process 2 times with the downloaded file 2 times and still the error could have your baffin.pit file

Did you try to flash the Stock without The pit file then flash the bit file alone and after that flash the stock alone
1. flash the stock
2. Flash the pit
3. Flash the stock again
I know it seems silly but try it

theory or skype whatsapp, could leave here

Yousef Mohamed said:
Did you try to flash the Stock without The pit file then flash the bit file alone and after that flash the stock alone
1. flash the stock
2. Flash the pit
3. Flash the stock again
I know it seems silly but try it
Click to expand...
Click to collapse
I keep getting the same error

That's what happens when I try to go up the system after flashing the rom 2 TIMES

Help!! Have I killed my phone? Can it be fixed?

A few weeks ago, my phone was stuck on Samsung Logo. Having read through several threads on the subject, I attempted flashing though Odin but despite following all instructions, my phone is now stuck on a screen that says: "Firmware upgrade encountered an issue. Please select recory mode in Kies & try again." (pic attached).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I press volume up & power & home, I do get to "Downloading ... Do not turn off target" but can't seem to progress beyond this.
I must say, I have only ever attempted one flash before a few years ago and I am not the brightest spark when it comes to understanding what I'm doing even though I am good at following instructions but any help with this would be greatly appreciated and welcomed.
Thanks
Tried Odin again - message I get is:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SC02EOMALJF_SC02EDCMALJF_SC02EOMALJF_HOME_REV04_user_low_true.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Are you using the original Samsung USB cable? Have you tried different USB cables, USB ports, ROMs, and operating systems?

NAND Write start Error Samsung galaxy s6 edge

Hello, I have been trying to fix my samsung galaxy s6 edge for it was damaged by someone in an attempt to unlock the phone.
(Custom binary blocked by FRP Lock) then the phone is not booting anymore, not even charging as well. Just giving boot loop then the error message on the upper left corner.
Samsung said they don't have the S/W for my device since it has been purchased in another country. I'm from the PH and the phone came from US(T-mobile)
Model #- Sm-G925T
Now I'm trying to Flash Stock ROM and it's giving me this error. I've tried multiple .tar.md5 file and I don't think the firmwares are the problem.
I'm guessing that ROM that he flashed is G925TUVU3EPD1(as shown in Recovery mode)
I have been trying to do this for the whole day. I am desperate for help. I never had a smartphone for 2 years after my Samsung GS3 got lost until when Someone sent me this as a gift.
Here is the Odin Log.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G925TTMB1AOCG_CL4351282_QB4489203_REV02_us er_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925TUVU1AOCG_CL4351282_QB4489203_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I appreciate ANYONE who will help. Thank you in advance.